/***********************************************************************************************************************
 * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
 * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
 **********************************************************************************************************************/

/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!GlobalInfo
product: Pins v15.0
processor: MIMXRT1021xxxxx
package_id: MIMXRT1021DAG5A
mcu_data: ksdk2_0
processor_version: 15.0.1
pin_labels:
- {pin_num: '87', pin_signal: GPIO_AD_B1_05, label: DC, identifier: DC}
- {pin_num: '76', pin_signal: GPIO_AD_B1_13, label: LEDA, identifier: LEDA}
power_domains: {NVCC_GPIO: '3.3'}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

#include "fsl_common.h"
#include "fsl_iomuxc.h"
#include "fsl_gpio.h"
#include "pin_mux.h"

/* FUNCTION ************************************************************************************************************
 * 
 * Function Name : BOARD_InitBootPins
 * Description   : Calls initialization functions.
 * 
 * END ****************************************************************************************************************/
void BOARD_InitBootPins(void) {
    BOARD_InitDbgUARTPins();
    BOARD_InitLCDSPIPins();
    BOARD_InitLCDTPPins();
    BOARD_InitLEDPins();
}

/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitDbgUARTPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
  - {pin_num: '105', peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_06}
  - {pin_num: '101', peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_07}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitDbgUARTPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitDbgUARTPins(void) {
  CLOCK_EnableClock(kCLOCK_Iomuxc);           

  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_06_LPUART1_TX, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_07_LPUART1_RX, 0U); 
}

/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitLCDSPIPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
  - {pin_num: '90', peripheral: LPSPI4, signal: SCK, pin_signal: GPIO_AD_B1_02}
  - {pin_num: '89', peripheral: LPSPI4, signal: PCS0, pin_signal: GPIO_AD_B1_03}
  - {pin_num: '88', peripheral: LPSPI4, signal: SDO, pin_signal: GPIO_AD_B1_04}
  - {pin_num: '87', peripheral: GPIO1, signal: 'gpio_io, 21', pin_signal: GPIO_AD_B1_05, direction: OUTPUT, gpio_init_state: 'false'}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitLCDSPIPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitLCDSPIPins(void) {
  CLOCK_EnableClock(kCLOCK_Iomuxc);           

  /* GPIO configuration of DC on GPIO_AD_B1_05 (pin 87) */
  gpio_pin_config_t DC_config = {
      .direction = kGPIO_DigitalOutput,
      .outputLogic = 0U,
      .interruptMode = kGPIO_NoIntmode
  };
  /* Initialize GPIO functionality on GPIO_AD_B1_05 (pin 87) */
  GPIO_PinInit(GPIO1, 21U, &DC_config);

  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_02_LPSPI4_SCK, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_03_LPSPI4_PCS0, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_04_LPSPI4_SDO, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_05_GPIO1_IO21, 0U); 
}

/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitLCDTPPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
  - {pin_num: '74', peripheral: LPI2C1, signal: SDA, pin_signal: GPIO_AD_B1_15, software_input_on: Enable, open_drain: Enable}
  - {pin_num: '75', peripheral: LPI2C1, signal: SCL, pin_signal: GPIO_AD_B1_14, software_input_on: Enable, open_drain: Enable}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitLCDTPPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitLCDTPPins(void) {
  CLOCK_EnableClock(kCLOCK_Iomuxc);           

  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_14_LPI2C1_SCL, 1U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_15_LPI2C1_SDA, 1U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_14_LPI2C1_SCL, 0x18B0U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_15_LPI2C1_SDA, 0x18B0U); 
}

/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitLEDPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
  - {pin_num: '76', peripheral: GPIO1, signal: 'gpio_io, 29', pin_signal: GPIO_AD_B1_13, direction: OUTPUT, gpio_init_state: 'true', open_drain: Enable, speed: MHZ_50,
    pull_keeper_enable: Disable}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitLEDPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitLEDPins(void) {
  CLOCK_EnableClock(kCLOCK_Iomuxc);           

  /* GPIO configuration of LEDA on GPIO_AD_B1_13 (pin 76) */
  gpio_pin_config_t LEDA_config = {
      .direction = kGPIO_DigitalOutput,
      .outputLogic = 1U,
      .interruptMode = kGPIO_NoIntmode
  };
  /* Initialize GPIO functionality on GPIO_AD_B1_13 (pin 76) */
  GPIO_PinInit(GPIO1, 29U, &LEDA_config);

  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_13_GPIO1_IO29, 0U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_13_GPIO1_IO29, 0x0830U); 
}
/***********************************************************************************************************************
 * EOF
 **********************************************************************************************************************/