/***********************************************************************************************************************
 * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
 * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
 **********************************************************************************************************************/

/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!GlobalInfo
product: Pins v15.0
processor: MIMXRT1052xxxxB
package_id: MIMXRT1052DVL6B
mcu_data: ksdk2_0
processor_version: 15.0.1
pin_labels:
- {pin_num: C7, pin_signal: GPIO_EMC_41, label: LED_B, identifier: LED_R;LED_B}
- {pin_num: B12, pin_signal: GPIO_B1_07, label: LED_G, identifier: LED_G}
- {pin_num: A7, pin_signal: GPIO_EMC_40, label: LED_R, identifier: LED_B;LED_R}
- {pin_num: G14, pin_signal: GPIO_AD_B0_05, label: USDHC1_PWR, identifier: USDHC1_PWR}
- {pin_num: M11, pin_signal: GPIO_AD_B0_02, label: LCD_RST, identifier: LCD_RST}
- {pin_num: M14, pin_signal: GPIO_AD_B0_00, label: CSI_, identifier: CSI_;CSI_PDN}
- {pin_num: H10, pin_signal: GPIO_AD_B0_01, label: CSI_RST, identifier: CSI_RST}
- {pin_num: G11, pin_signal: GPIO_AD_B0_03, label: BUZZER, identifier: BUZZER}
- {pin_num: L6, pin_signal: WAKEUP, label: WAKEUP, identifier: WAKEUP}
- {pin_num: D11, pin_signal: GPIO_B1_03, label: RST, identifier: RST}
- {pin_num: G13, pin_signal: GPIO_AD_B0_10, label: LEDB, identifier: LEDB}
- {pin_num: H13, pin_signal: GPIO_AD_B1_08, label: LEDR, identifier: LEDR}
- {pin_num: M13, pin_signal: GPIO_AD_B1_09, label: LEDG, identifier: LEDG}
- {pin_num: F14, pin_signal: GPIO_AD_B0_09, label: LEDA, identifier: LEDA}
power_domains: {DCDC_IN: '3.3', DCDC_IN_Q: '3.3', DCDC_LP: '1.25', DCDC_PSWITCH: '3.3', DCDC_SENSE: '1.25', NVCC_EMC: '3.3', NVCC_GPIO: '3.3', NVCC_SD0: '3.3', NVCC_SD1: '3.3',
  VDDA_ADC_3P3: '3.3', VDD_HIGH_CAP: '1.1', VDD_HIGH_IN: '3.3', VDD_SNVS_CAP: '1.1', VDD_SNVS_IN: '3.3', VDD_SOC_IN: '1.25', VDD_USB_CAP: '2.5'}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

#include "fsl_common.h"
#include "fsl_iomuxc.h"
#include "fsl_gpio.h"
#include "pin_mux.h"

/* FUNCTION ************************************************************************************************************
 * 
 * Function Name : BOARD_InitBootPins
 * Description   : Calls initialization functions.
 * 
 * END ****************************************************************************************************************/
void BOARD_InitBootPins(void) {
    BOARD_InitDbgUARTPins();
    BOARD_InitSPILCDPins();
    BOARD_InitLEDPins();
}

/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitDbgUARTPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
  - {pin_num: K14, peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_12}
  - {pin_num: L14, peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_13}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitDbgUARTPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitDbgUARTPins(void) {
  CLOCK_EnableClock(kCLOCK_Iomuxc);           

#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TXD, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RXD, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0U); 
#endif
}

/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitSPILCDPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
  - {pin_num: E8, peripheral: LPSPI4, signal: SDO, pin_signal: GPIO_B0_02}
  - {pin_num: D8, peripheral: LPSPI4, signal: SCK, pin_signal: GPIO_B0_03}
  - {pin_num: E7, peripheral: LPSPI4, signal: SDI, pin_signal: GPIO_B0_01}
  - {pin_num: D7, peripheral: LPSPI4, signal: PCS0, pin_signal: GPIO_B0_00}
  - {pin_num: D11, peripheral: GPIO2, signal: 'gpio_io, 19', pin_signal: GPIO_B1_03, direction: OUTPUT, gpio_init_state: 'true'}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitSPILCDPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitSPILCDPins(void) {
  CLOCK_EnableClock(kCLOCK_Iomuxc);           

  /* GPIO configuration of RST on GPIO_B1_03 (pin D11) */
  gpio_pin_config_t RST_config = {
      .direction = kGPIO_DigitalOutput,
      .outputLogic = 1U,
      .interruptMode = kGPIO_NoIntmode
  };
  /* Initialize GPIO functionality on GPIO_B1_03 (pin D11) */
  GPIO_PinInit(GPIO2, 19U, &RST_config);

  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_00_LPSPI4_PCS0, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_01_LPSPI4_SDI, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_02_LPSPI4_SDO, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_03_LPSPI4_SCK, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_03_GPIO2_IO19, 0U); 
}

/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitLEDPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
  - {pin_num: G13, peripheral: GPIO1, signal: 'gpio_io, 10', pin_signal: GPIO_AD_B0_10, direction: OUTPUT, gpio_init_state: 'true'}
  - {pin_num: H13, peripheral: GPIO1, signal: 'gpio_io, 24', pin_signal: GPIO_AD_B1_08, direction: OUTPUT, gpio_init_state: 'true'}
  - {pin_num: M13, peripheral: GPIO1, signal: 'gpio_io, 25', pin_signal: GPIO_AD_B1_09, direction: OUTPUT, gpio_init_state: 'true'}
  - {pin_num: F14, peripheral: GPIO1, signal: 'gpio_io, 09', pin_signal: GPIO_AD_B0_09, direction: OUTPUT, gpio_init_state: 'true'}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitLEDPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitLEDPins(void) {
  CLOCK_EnableClock(kCLOCK_Iomuxc);           

  /* GPIO configuration of LEDA on GPIO_AD_B0_09 (pin F14) */
  gpio_pin_config_t LEDA_config = {
      .direction = kGPIO_DigitalOutput,
      .outputLogic = 1U,
      .interruptMode = kGPIO_NoIntmode
  };
  /* Initialize GPIO functionality on GPIO_AD_B0_09 (pin F14) */
  GPIO_PinInit(GPIO1, 9U, &LEDA_config);

  /* GPIO configuration of LEDB on GPIO_AD_B0_10 (pin G13) */
  gpio_pin_config_t LEDB_config = {
      .direction = kGPIO_DigitalOutput,
      .outputLogic = 1U,
      .interruptMode = kGPIO_NoIntmode
  };
  /* Initialize GPIO functionality on GPIO_AD_B0_10 (pin G13) */
  GPIO_PinInit(GPIO1, 10U, &LEDB_config);

  /* GPIO configuration of LEDR on GPIO_AD_B1_08 (pin H13) */
  gpio_pin_config_t LEDR_config = {
      .direction = kGPIO_DigitalOutput,
      .outputLogic = 1U,
      .interruptMode = kGPIO_NoIntmode
  };
  /* Initialize GPIO functionality on GPIO_AD_B1_08 (pin H13) */
  GPIO_PinInit(GPIO1, 24U, &LEDR_config);

  /* GPIO configuration of LEDG on GPIO_AD_B1_09 (pin M13) */
  gpio_pin_config_t LEDG_config = {
      .direction = kGPIO_DigitalOutput,
      .outputLogic = 1U,
      .interruptMode = kGPIO_NoIntmode
  };
  /* Initialize GPIO functionality on GPIO_AD_B1_09 (pin M13) */
  GPIO_PinInit(GPIO1, 25U, &LEDG_config);

  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_10_GPIO1_IO10, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_08_GPIO1_IO24, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_09_GPIO1_IO25, 0U); 
}
/***********************************************************************************************************************
 * EOF
 **********************************************************************************************************************/