/***********************************************************************************************************************
 * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
 * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
 **********************************************************************************************************************/

/* clang-format off */
/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!GlobalInfo
product: Pins v12.0
processor: LPC54102J512
package_id: LPC54102J512BD64
mcu_data: ksdk2_0
processor_version: 12.0.0
pin_labels:
- {pin_num: '28', pin_signal: PIO1_8/ADC_11/SPI1_MISO/CT32B1_MAT3/CT32B1_CAP3, label: LED_R, identifier: LED_R}
- {pin_num: '41', pin_signal: PIO0_7/U1_SCLK/SCT0_OUT0/CT32B0_MAT2/CT32B0_CAP2, label: BMM_DRDY, identifier: BMM_DRDY}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */
/* clang-format on */

#include "fsl_common.h"
#include "fsl_gpio.h"
#include "fsl_inputmux.h"
#include "pin_mux.h"

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitBootPins
 * Description   : Calls initialization functions.
 *
 * END ****************************************************************************************************************/
void BOARD_InitBootPins(void)
{
    BOARD_InitPins();
}

/* clang-format off */
/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitPins:
- options: {callFromInitBoot: 'true', coreID: cm4, enableClock: 'true'}
- pin_list:
  - {pin_num: '31', peripheral: USART0, signal: RXD, pin_signal: PIO0_0/U0_RXD/SPI0_SSEL0/CT32B0_CAP0/SCT0_OUT3}
  - {pin_num: '32', peripheral: USART0, signal: TXD, pin_signal: PIO0_1/U0_TXD/SPI0_SSEL1/CT32B0_CAP1/SCT0_OUT1}
  - {pin_num: '1', peripheral: I2C0, signal: SCL, pin_signal: PIO0_23/I2C0_SCL/CT32B0_CAP0}
  - {pin_num: '2', peripheral: I2C0, signal: SDA, pin_signal: PIO0_24/I2C0_SDA/CT32B0_CAP1/CT32B0_MAT0}
  - {pin_num: '28', peripheral: GPIO, signal: 'PIO1, 8', pin_signal: PIO1_8/ADC_11/SPI1_MISO/CT32B1_MAT3/CT32B1_CAP3, direction: OUTPUT, gpio_init_state: 'true'}
  - {pin_num: '41', peripheral: PINT, signal: 'PINT, 0', pin_signal: PIO0_7/U1_SCLK/SCT0_OUT0/CT32B0_MAT2/CT32B0_CAP2}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */
/* clang-format on */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
/* Function assigned for the Cortex-M4F */
void BOARD_InitPins(void)
{
    /* Enables the clock for the input muxes. 0 = Disable; 1 = Enable.: 0x01u */
    CLOCK_EnableClock(kCLOCK_InputMux);
    /* Enables the clock for the IOCON block. 0 = Disable; 1 = Enable.: 0x01u */
    CLOCK_EnableClock(kCLOCK_Iocon);
    /* Enables the clock for the GPIO1 module */
    CLOCK_EnableClock(kCLOCK_Gpio1);

    gpio_pin_config_t LED_R_config = {
        .pinDirection = kGPIO_DigitalOutput,
        .outputLogic = 1U
    };
    /* Initialize GPIO functionality on pin PIO1_8 (pin 28)  */
    GPIO_PinInit(BOARD_INITPINS_LED_R_GPIO, BOARD_INITPINS_LED_R_PORT, BOARD_INITPINS_LED_R_PIN, &LED_R_config);
    /* PIO0_7 is selected for PINT input 0 */
    INPUTMUX_AttachSignal(INPUTMUX, 0U, kINPUTMUX_GpioPort0Pin7ToPintsel);

    IOCON->PIO[0][0] = ((IOCON->PIO[0][0] &
                         /* Mask bits to zero which are setting */
                         (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))

                        /* Selects pin function.
                         * : PORT00 (pin 31) is configured as U0_RXD. */
                        | IOCON_PIO_FUNC(PIO00_FUNC_ALT1)

                        /* Select Analog/Digital mode.
                         * : Digital mode. */
                        | IOCON_PIO_DIGIMODE(PIO00_DIGIMODE_DIGITAL));

    IOCON->PIO[0][1] = ((IOCON->PIO[0][1] &
                         /* Mask bits to zero which are setting */
                         (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))

                        /* Selects pin function.
                         * : PORT01 (pin 32) is configured as U0_TXD. */
                        | IOCON_PIO_FUNC(PIO01_FUNC_ALT1)

                        /* Select Analog/Digital mode.
                         * : Digital mode. */
                        | IOCON_PIO_DIGIMODE(PIO01_DIGIMODE_DIGITAL));

    IOCON->PIO[0][23] = ((IOCON->PIO[0][23] &
                          /* Mask bits to zero which are setting */
                          (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))

                         /* Selects pin function.
                          * : PORT023 (pin 1) is configured as I2C0_SCL. */
                         | IOCON_PIO_FUNC(PIO023_FUNC_ALT1)

                         /* Select Analog/Digital mode.
                          * : Digital mode. */
                         | IOCON_PIO_DIGIMODE(PIO023_DIGIMODE_DIGITAL));

    IOCON->PIO[0][24] = ((IOCON->PIO[0][24] &
                          /* Mask bits to zero which are setting */
                          (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))

                         /* Selects pin function.
                          * : PORT024 (pin 2) is configured as I2C0_SDA. */
                         | IOCON_PIO_FUNC(PIO024_FUNC_ALT1)

                         /* Select Analog/Digital mode.
                          * : Digital mode. */
                         | IOCON_PIO_DIGIMODE(PIO024_DIGIMODE_DIGITAL));

    IOCON->PIO[0][7] = ((IOCON->PIO[0][7] &
                         /* Mask bits to zero which are setting */
                         (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))

                        /* Selects pin function.
                         * : PORT07 (pin 41) is configured as PIO0_7. */
                        | IOCON_PIO_FUNC(PIO07_FUNC_ALT0)

                        /* Select Analog/Digital mode.
                         * : Digital mode. */
                        | IOCON_PIO_DIGIMODE(PIO07_DIGIMODE_DIGITAL));

    IOCON->PIO[1][8] = ((IOCON->PIO[1][8] &
                         /* Mask bits to zero which are setting */
                         (~(IOCON_PIO_FUNC_MASK | IOCON_PIO_DIGIMODE_MASK)))

                        /* Selects pin function.
                         * : PORT18 (pin 28) is configured as PIO1_8. */
                        | IOCON_PIO_FUNC(PIO18_FUNC_ALT0)

                        /* Select Analog/Digital mode.
                         * : Digital mode. */
                        | IOCON_PIO_DIGIMODE(PIO18_DIGIMODE_DIGITAL));
}
/***********************************************************************************************************************
 * EOF
 **********************************************************************************************************************/