730 lines
41 KiB
C
730 lines
41 KiB
C
/***********************************************************************************************************************
|
|
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
|
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
|
**********************************************************************************************************************/
|
|
|
|
/* clang-format off */
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
!!GlobalInfo
|
|
product: Pins v11.0
|
|
processor: LPC55S16
|
|
package_id: LPC55S16JBD100
|
|
mcu_data: ksdk2_0
|
|
processor_version: 11.0.2
|
|
board: LPCXpresso55S16
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
/* clang-format on */
|
|
|
|
#include "fsl_common.h"
|
|
#include "fsl_gpio.h"
|
|
#include "fsl_iocon.h"
|
|
#include "pin_mux.h"
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitBootPins
|
|
* Description : Calls initialization functions.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
void BOARD_InitBootPins(void)
|
|
{
|
|
BOARD_InitDEBUG_UARTPins();
|
|
}
|
|
|
|
/* clang-format off */
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitDEBUG_UARTPins:
|
|
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: '92', peripheral: FLEXCOMM0, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_29/FC0_RXD_SDA_MOSI_DATA/CTIMER2_MAT3/SCT0_OUT8/CMP0_OUT/PLU_OUT2/SECURE_GPIO0_29,
|
|
mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
- {pin_num: '94', peripheral: FLEXCOMM0, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_30/FC0_TXD_SCL_MISO_WS/CTIMER0_MAT0/SCT0_OUT9/SECURE_GPIO0_30, mode: inactive,
|
|
slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
/* clang-format on */
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitDEBUG_UARTPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
/* Function assigned for the Cortex-M33 */
|
|
void BOARD_InitDEBUG_UARTPins(void)
|
|
{
|
|
/* Enables the clock for the I/O controller.: Enable Clock. */
|
|
CLOCK_EnableClock(kCLOCK_Iocon);
|
|
|
|
const uint32_t port0_pin29_config = (/* Pin is configured as FC0_RXD_SDA_MOSI_DATA */
|
|
IOCON_PIO_FUNC1 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT0 PIN29 (coords: 92) is configured as FC0_RXD_SDA_MOSI_DATA */
|
|
IOCON_PinMuxSet(IOCON, 0U, 29U, port0_pin29_config);
|
|
|
|
const uint32_t port0_pin30_config = (/* Pin is configured as FC0_TXD_SCL_MISO_WS */
|
|
IOCON_PIO_FUNC1 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT0 PIN30 (coords: 94) is configured as FC0_TXD_SCL_MISO_WS */
|
|
IOCON_PinMuxSet(IOCON, 0U, 30U, port0_pin30_config);
|
|
}
|
|
|
|
/* clang-format off */
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitSWD_DEBUGPins:
|
|
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: '13', peripheral: SWD, signal: SWCLK, pin_signal: PIO0_11/FC6_RXD_SDA_MOSI_DATA/CTIMER2_MAT2/FREQME_GPIO_CLK_A/SWCLK/SECURE_GPIO0_11/ADC0_9, mode: pullDown,
|
|
slew_rate: standard, invert: disabled, open_drain: disabled, asw: disabled}
|
|
- {pin_num: '12', peripheral: SWD, signal: SWDIO, pin_signal: PIO0_12/FC3_TXD_SCL_MISO_WS/FREQME_GPIO_CLK_B/SCT_GPI7/SWDIO/FC6_TXD_SCL_MISO_WS/SECURE_GPIO0_12/ADC0_10,
|
|
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled, asw: disabled}
|
|
- {pin_num: '21', peripheral: SWD, signal: SWO, pin_signal: PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1, mode: inactive,
|
|
slew_rate: standard, invert: disabled, open_drain: disabled, asw: disabled}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
/* clang-format on */
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitSWD_DEBUGPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
/* Function assigned for the Cortex-M33 */
|
|
void BOARD_InitSWD_DEBUGPins(void)
|
|
{
|
|
/* Enables the clock for the I/O controller.: Enable Clock. */
|
|
CLOCK_EnableClock(kCLOCK_Iocon);
|
|
|
|
const uint32_t port0_pin10_config = (/* Pin is configured as SWO */
|
|
IOCON_PIO_FUNC6 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI |
|
|
/* Analog switch is open (disabled) */
|
|
IOCON_PIO_ASW_DI);
|
|
/* PORT0 PIN10 (coords: 21) is configured as SWO */
|
|
IOCON_PinMuxSet(IOCON, 0U, 10U, port0_pin10_config);
|
|
|
|
const uint32_t port0_pin11_config = (/* Pin is configured as SWCLK */
|
|
IOCON_PIO_FUNC6 |
|
|
/* Selects pull-down function */
|
|
IOCON_PIO_MODE_PULLDOWN |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI |
|
|
/* Analog switch is open (disabled) */
|
|
IOCON_PIO_ASW_DI);
|
|
/* PORT0 PIN11 (coords: 13) is configured as SWCLK */
|
|
IOCON_PinMuxSet(IOCON, 0U, 11U, port0_pin11_config);
|
|
|
|
const uint32_t port0_pin12_config = (/* Pin is configured as SWDIO */
|
|
IOCON_PIO_FUNC6 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI |
|
|
/* Analog switch is open (disabled) */
|
|
IOCON_PIO_ASW_DI);
|
|
/* PORT0 PIN12 (coords: 12) is configured as SWDIO */
|
|
IOCON_PinMuxSet(IOCON, 0U, 12U, port0_pin12_config);
|
|
}
|
|
|
|
/* clang-format off */
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitUSBPins:
|
|
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: '98', peripheral: USBFSH, signal: USB_DM, pin_signal: USB0_DM}
|
|
- {pin_num: '97', peripheral: USBFSH, signal: USB_DP, pin_signal: USB0_DP}
|
|
- {pin_num: '78', peripheral: USBFSH, signal: USB_VBUS, pin_signal: PIO0_22/FC6_TXD_SCL_MISO_WS/UTICK_CAP1/CT_INP15/SCT0_OUT3/USB0_VBUS/PLU_OUT7/SECURE_GPIO0_22,
|
|
mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
- {pin_num: '35', peripheral: USBHSH, signal: USB_DM, pin_signal: USB1_DM}
|
|
- {pin_num: '34', peripheral: USBHSH, signal: USB_DP, pin_signal: USB1_DP}
|
|
- {pin_num: '36', peripheral: USBHSH, signal: USB_VBUS, pin_signal: USB1_VBUS}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
/* clang-format on */
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitUSBPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
/* Function assigned for the Cortex-M33 */
|
|
void BOARD_InitUSBPins(void)
|
|
{
|
|
/* Enables the clock for the I/O controller.: Enable Clock. */
|
|
CLOCK_EnableClock(kCLOCK_Iocon);
|
|
|
|
const uint32_t port0_pin22_config = (/* Pin is configured as USB0_VBUS */
|
|
IOCON_PIO_FUNC7 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT0 PIN22 (coords: 78) is configured as USB0_VBUS */
|
|
IOCON_PinMuxSet(IOCON, 0U, 22U, port0_pin22_config);
|
|
}
|
|
|
|
/* clang-format off */
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitLEDsPins:
|
|
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: '1', peripheral: GPIO, signal: 'PIO1, 4', pin_signal: PIO1_4/FC0_SCK/CTIMER2_MAT1/SCT0_OUT0/FREQME_GPIO_CLK_A, direction: OUTPUT, gpio_init_state: 'true',
|
|
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
- {pin_num: '5', peripheral: GPIO, signal: 'PIO1, 6', pin_signal: PIO1_6/FC0_TXD_SCL_MISO_WS/CTIMER2_MAT1/SCT_GPI3, direction: OUTPUT, gpio_init_state: 'true',
|
|
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
- {pin_num: '9', peripheral: GPIO, signal: 'PIO1, 7', pin_signal: PIO1_7/FC0_RTS_SCL_SSEL1/CTIMER2_MAT2/SCT_GPI4, direction: OUTPUT, gpio_init_state: 'true', mode: pullUp,
|
|
slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
/* clang-format on */
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitLEDsPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
/* Function assigned for the Cortex-M33 */
|
|
void BOARD_InitLEDsPins(void)
|
|
{
|
|
/* Enables the clock for the I/O controller.: Enable Clock. */
|
|
CLOCK_EnableClock(kCLOCK_Iocon);
|
|
|
|
/* Enables the clock for the GPIO1 module */
|
|
CLOCK_EnableClock(kCLOCK_Gpio1);
|
|
|
|
gpio_pin_config_t LED_RED_config = {
|
|
.pinDirection = kGPIO_DigitalOutput,
|
|
.outputLogic = 1U
|
|
};
|
|
/* Initialize GPIO functionality on pin PIO1_4 (pin 1) */
|
|
GPIO_PinInit(BOARD_INITLEDSPINS_LED_RED_GPIO, BOARD_INITLEDSPINS_LED_RED_PORT, BOARD_INITLEDSPINS_LED_RED_PIN, &LED_RED_config);
|
|
|
|
gpio_pin_config_t LED_BLUE_config = {
|
|
.pinDirection = kGPIO_DigitalOutput,
|
|
.outputLogic = 1U
|
|
};
|
|
/* Initialize GPIO functionality on pin PIO1_6 (pin 5) */
|
|
GPIO_PinInit(BOARD_INITLEDSPINS_LED_BLUE_GPIO, BOARD_INITLEDSPINS_LED_BLUE_PORT, BOARD_INITLEDSPINS_LED_BLUE_PIN, &LED_BLUE_config);
|
|
|
|
gpio_pin_config_t LED_GREEN_config = {
|
|
.pinDirection = kGPIO_DigitalOutput,
|
|
.outputLogic = 1U
|
|
};
|
|
/* Initialize GPIO functionality on pin PIO1_7 (pin 9) */
|
|
GPIO_PinInit(BOARD_INITLEDSPINS_LED_GREEN_GPIO, BOARD_INITLEDSPINS_LED_GREEN_PORT, BOARD_INITLEDSPINS_LED_GREEN_PIN, &LED_GREEN_config);
|
|
|
|
const uint32_t LED_RED = (/* Pin is configured as PIO1_4 */
|
|
IOCON_PIO_FUNC0 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN4 (coords: 1) is configured as PIO1_4 */
|
|
IOCON_PinMuxSet(IOCON, BOARD_INITLEDSPINS_LED_RED_PORT, BOARD_INITLEDSPINS_LED_RED_PIN, LED_RED);
|
|
|
|
const uint32_t LED_BLUE = (/* Pin is configured as PIO1_6 */
|
|
IOCON_PIO_FUNC0 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN6 (coords: 5) is configured as PIO1_6 */
|
|
IOCON_PinMuxSet(IOCON, BOARD_INITLEDSPINS_LED_BLUE_PORT, BOARD_INITLEDSPINS_LED_BLUE_PIN, LED_BLUE);
|
|
|
|
const uint32_t LED_GREEN = (/* Pin is configured as PIO1_7 */
|
|
IOCON_PIO_FUNC0 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN7 (coords: 9) is configured as PIO1_7 */
|
|
IOCON_PinMuxSet(IOCON, BOARD_INITLEDSPINS_LED_GREEN_PORT, BOARD_INITLEDSPINS_LED_GREEN_PIN, LED_GREEN);
|
|
}
|
|
|
|
/* clang-format off */
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitBUTTONsPins:
|
|
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: '64', peripheral: GPIO, signal: 'PIO1, 18', pin_signal: PIO1_18/SCT0_OUT5/PLU_OUT0, identifier: WAKEUP, direction: INPUT, mode: pullUp, slew_rate: standard,
|
|
invert: disabled, open_drain: disabled}
|
|
- {pin_num: '10', peripheral: GPIO, signal: 'PIO1, 9', pin_signal: PIO1_9/FC1_SCK/CT_INP4/SCT0_OUT2/FC4_CTS_SDA_SSEL0/ADC0_12, identifier: USR, direction: INPUT,
|
|
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled, asw: disabled}
|
|
- {pin_num: '32', peripheral: SYSCON, signal: RESET, pin_signal: RESETN, identifier: RESET}
|
|
- {pin_num: '88', peripheral: GPIO, signal: 'PIO0, 5', pin_signal: PIO0_5/CAN0_TD/FC4_RXD_SDA_MOSI_DATA/CTIMER3_MAT0/SCT_GPI5/FC3_RTS_SCL_SSEL1/MCLK/SECURE_GPIO0_5,
|
|
identifier: ISP, direction: INPUT, mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
/* clang-format on */
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitBUTTONsPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
/* Function assigned for the Cortex-M33 */
|
|
void BOARD_InitBUTTONsPins(void)
|
|
{
|
|
/* Enables the clock for the I/O controller.: Enable Clock. */
|
|
CLOCK_EnableClock(kCLOCK_Iocon);
|
|
|
|
/* Enables the clock for the GPIO0 module */
|
|
CLOCK_EnableClock(kCLOCK_Gpio0);
|
|
|
|
/* Enables the clock for the GPIO1 module */
|
|
CLOCK_EnableClock(kCLOCK_Gpio1);
|
|
|
|
gpio_pin_config_t ISP_config = {
|
|
.pinDirection = kGPIO_DigitalInput,
|
|
.outputLogic = 0U
|
|
};
|
|
/* Initialize GPIO functionality on pin PIO0_5 (pin 88) */
|
|
GPIO_PinInit(BOARD_INITBUTTONSPINS_ISP_GPIO, BOARD_INITBUTTONSPINS_ISP_PORT, BOARD_INITBUTTONSPINS_ISP_PIN, &ISP_config);
|
|
|
|
gpio_pin_config_t USR_config = {
|
|
.pinDirection = kGPIO_DigitalInput,
|
|
.outputLogic = 0U
|
|
};
|
|
/* Initialize GPIO functionality on pin PIO1_9 (pin 10) */
|
|
GPIO_PinInit(BOARD_INITBUTTONSPINS_USR_GPIO, BOARD_INITBUTTONSPINS_USR_PORT, BOARD_INITBUTTONSPINS_USR_PIN, &USR_config);
|
|
|
|
gpio_pin_config_t WAKEUP_config = {
|
|
.pinDirection = kGPIO_DigitalInput,
|
|
.outputLogic = 0U
|
|
};
|
|
/* Initialize GPIO functionality on pin PIO1_18 (pin 64) */
|
|
GPIO_PinInit(BOARD_INITBUTTONSPINS_WAKEUP_GPIO, BOARD_INITBUTTONSPINS_WAKEUP_PORT, BOARD_INITBUTTONSPINS_WAKEUP_PIN, &WAKEUP_config);
|
|
|
|
const uint32_t ISP = (/* Pin is configured as PIO0_5 */
|
|
IOCON_PIO_FUNC0 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT0 PIN5 (coords: 88) is configured as PIO0_5 */
|
|
IOCON_PinMuxSet(IOCON, BOARD_INITBUTTONSPINS_ISP_PORT, BOARD_INITBUTTONSPINS_ISP_PIN, ISP);
|
|
|
|
const uint32_t WAKEUP = (/* Pin is configured as PIO1_18 */
|
|
IOCON_PIO_FUNC0 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN18 (coords: 64) is configured as PIO1_18 */
|
|
IOCON_PinMuxSet(IOCON, BOARD_INITBUTTONSPINS_WAKEUP_PORT, BOARD_INITBUTTONSPINS_WAKEUP_PIN, WAKEUP);
|
|
|
|
const uint32_t USR = (/* Pin is configured as PIO1_9 */
|
|
IOCON_PIO_FUNC0 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI |
|
|
/* Analog switch is open (disabled) */
|
|
IOCON_PIO_ASW_DI);
|
|
/* PORT1 PIN9 (coords: 10) is configured as PIO1_9 */
|
|
IOCON_PinMuxSet(IOCON, BOARD_INITBUTTONSPINS_USR_PORT, BOARD_INITBUTTONSPINS_USR_PIN, USR);
|
|
}
|
|
|
|
/* clang-format off */
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitI2SPins:
|
|
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: '30', peripheral: FLEXCOMM4, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3, mode: pullUp,
|
|
slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
- {pin_num: '4', peripheral: FLEXCOMM4, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2, mode: pullUp, slew_rate: standard,
|
|
invert: disabled, open_drain: disabled}
|
|
- {pin_num: '74', peripheral: FLEXCOMM7, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_20/FC3_CTS_SDA_SSEL0/CTIMER1_MAT1/CT_INP15/SCT_GPI2/FC7_RXD_SDA_MOSI_DATA/HS_SPI_SSEL0/PLU_IN5/SECURE_GPIO0_20/FC4_TXD_SCL_MISO_WS,
|
|
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
- {pin_num: '90', peripheral: FLEXCOMM7, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_19/FC4_RTS_SCL_SSEL1/UTICK_CAP0/CTIMER0_MAT2/SCT0_OUT2/FC7_TXD_SCL_MISO_WS/PLU_IN4/SECURE_GPIO0_19,
|
|
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
- {pin_num: '76', peripheral: FLEXCOMM7, signal: SCK, pin_signal: PIO0_21/FC3_RTS_SCL_SSEL1/UTICK_CAP3/CTIMER3_MAT3/SCT_GPI3/FC7_SCK/HS_SPI_SSEL3/PLU_CLKIN/SECURE_GPIO0_21,
|
|
mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
- {pin_num: '2', peripheral: FLEXCOMM6, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_13/FC6_RXD_SDA_MOSI_DATA/CT_INP6/USB0_OVERCURRENTN/USB0_FRAME, mode: pullUp,
|
|
slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
- {pin_num: '77', peripheral: GPIO, signal: 'PIO1, 25', pin_signal: PIO1_25/FC2_TXD_SCL_MISO_WS/SCT0_OUT2/UTICK_CAP0/PLU_CLKIN, direction: INPUT, mode: inactive,
|
|
slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
- {pin_num: '91', peripheral: SYSCON, signal: MCLK, pin_signal: PIO1_31/MCLK/CTIMER0_MAT2/SCT0_OUT6/PLU_IN0, direction: INPUT, mode: inactive, slew_rate: standard,
|
|
invert: disabled, open_drain: disabled}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
/* clang-format on */
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitI2SPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
/* Function assigned for the Cortex-M33 */
|
|
void BOARD_InitI2SPins(void)
|
|
{
|
|
/* Enables the clock for the I/O controller.: Enable Clock. */
|
|
CLOCK_EnableClock(kCLOCK_Iocon);
|
|
|
|
/* Enables the clock for the GPIO1 module */
|
|
CLOCK_EnableClock(kCLOCK_Gpio1);
|
|
|
|
gpio_pin_config_t I2S_IRQ_config = {
|
|
.pinDirection = kGPIO_DigitalInput,
|
|
.outputLogic = 0U
|
|
};
|
|
/* Initialize GPIO functionality on pin PIO1_25 (pin 77) */
|
|
GPIO_PinInit(BOARD_INITI2SPINS_I2S_IRQ_GPIO, BOARD_INITI2SPINS_I2S_IRQ_PORT, BOARD_INITI2SPINS_I2S_IRQ_PIN, &I2S_IRQ_config);
|
|
|
|
const uint32_t port0_pin19_config = (/* Pin is configured as FC7_TXD_SCL_MISO_WS */
|
|
IOCON_PIO_FUNC7 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT0 PIN19 (coords: 90) is configured as FC7_TXD_SCL_MISO_WS */
|
|
IOCON_PinMuxSet(IOCON, 0U, 19U, port0_pin19_config);
|
|
|
|
const uint32_t port0_pin20_config = (/* Pin is configured as FC7_RXD_SDA_MOSI_DATA */
|
|
IOCON_PIO_FUNC7 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT0 PIN20 (coords: 74) is configured as FC7_RXD_SDA_MOSI_DATA */
|
|
IOCON_PinMuxSet(IOCON, 0U, 20U, port0_pin20_config);
|
|
|
|
const uint32_t port0_pin21_config = (/* Pin is configured as FC7_SCK */
|
|
IOCON_PIO_FUNC7 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT0 PIN21 (coords: 76) is configured as FC7_SCK */
|
|
IOCON_PinMuxSet(IOCON, 0U, 21U, port0_pin21_config);
|
|
|
|
const uint32_t port1_pin13_config = (/* Pin is configured as FC6_RXD_SDA_MOSI_DATA */
|
|
IOCON_PIO_FUNC2 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN13 (coords: 2) is configured as FC6_RXD_SDA_MOSI_DATA */
|
|
IOCON_PinMuxSet(IOCON, 1U, 13U, port1_pin13_config);
|
|
|
|
const uint32_t port1_pin20_config = (/* Pin is configured as FC4_TXD_SCL_MISO_WS */
|
|
IOCON_PIO_FUNC5 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN20 (coords: 4) is configured as FC4_TXD_SCL_MISO_WS */
|
|
IOCON_PinMuxSet(IOCON, 1U, 20U, port1_pin20_config);
|
|
|
|
const uint32_t port1_pin21_config = (/* Pin is configured as FC4_RXD_SDA_MOSI_DATA */
|
|
IOCON_PIO_FUNC5 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN21 (coords: 30) is configured as FC4_RXD_SDA_MOSI_DATA */
|
|
IOCON_PinMuxSet(IOCON, 1U, 21U, port1_pin21_config);
|
|
|
|
const uint32_t I2S_IRQ = (/* Pin is configured as PIO1_25 */
|
|
IOCON_PIO_FUNC0 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN25 (coords: 77) is configured as PIO1_25 */
|
|
IOCON_PinMuxSet(IOCON, BOARD_INITI2SPINS_I2S_IRQ_PORT, BOARD_INITI2SPINS_I2S_IRQ_PIN, I2S_IRQ);
|
|
|
|
const uint32_t port1_pin31_config = (/* Pin is configured as MCLK */
|
|
IOCON_PIO_FUNC1 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN31 (coords: 91) is configured as MCLK */
|
|
IOCON_PinMuxSet(IOCON, 1U, 31U, port1_pin31_config);
|
|
|
|
SYSCON->MCLKIO = ((SYSCON->MCLKIO &
|
|
/* Mask bits to zero which are setting */
|
|
(~(SYSCON_MCLKIO_MCLKIO_MASK)))
|
|
|
|
/* MCLK control.
|
|
* : input mode. */
|
|
| SYSCON_MCLKIO_MCLKIO(MCLKIO_MCLKIO_INPUT));
|
|
}
|
|
|
|
/* clang-format off */
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitACCELPins:
|
|
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: '30', peripheral: FLEXCOMM4, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3, mode: pullUp,
|
|
slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
- {pin_num: '4', peripheral: FLEXCOMM4, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2, mode: pullUp, slew_rate: standard,
|
|
invert: disabled, open_drain: disabled}
|
|
- {pin_num: '68', peripheral: GPIO, signal: 'PIO1, 26', pin_signal: PIO1_26/FC2_CTS_SDA_SSEL0/SCT0_OUT3/CT_INP3/UTICK_CAP1/HS_SPI_SSEL3/PLU_IN5, mode: inactive,
|
|
slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
/* clang-format on */
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitACCELPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
/* Function assigned for the Cortex-M33 */
|
|
void BOARD_InitACCELPins(void)
|
|
{
|
|
/* Enables the clock for the I/O controller.: Enable Clock. */
|
|
CLOCK_EnableClock(kCLOCK_Iocon);
|
|
|
|
const uint32_t port1_pin20_config = (/* Pin is configured as FC4_TXD_SCL_MISO_WS */
|
|
IOCON_PIO_FUNC5 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN20 (coords: 4) is configured as FC4_TXD_SCL_MISO_WS */
|
|
IOCON_PinMuxSet(IOCON, 1U, 20U, port1_pin20_config);
|
|
|
|
const uint32_t port1_pin21_config = (/* Pin is configured as FC4_RXD_SDA_MOSI_DATA */
|
|
IOCON_PIO_FUNC5 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN21 (coords: 30) is configured as FC4_RXD_SDA_MOSI_DATA */
|
|
IOCON_PinMuxSet(IOCON, 1U, 21U, port1_pin21_config);
|
|
|
|
const uint32_t ACCL_INTR = (/* Pin is configured as PIO1_26 */
|
|
IOCON_PIO_FUNC0 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN26 (coords: 68) is configured as PIO1_26 */
|
|
IOCON_PinMuxSet(IOCON, BOARD_INITACCELPINS_ACCL_INTR_PORT, BOARD_INITACCELPINS_ACCL_INTR_PIN, ACCL_INTR);
|
|
}
|
|
|
|
/* clang-format off */
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitCANPins:
|
|
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: '85', peripheral: CAN0, signal: CAN_TD, pin_signal: PIO1_27/FC2_RTS_SCL_SSEL1/CTIMER0_MAT3/CLKOUT/PLU_IN4/CAN0_TD, mode: inactive, slew_rate: standard,
|
|
invert: disabled, open_drain: disabled}
|
|
- {pin_num: '41', peripheral: CAN0, signal: CAN_RD, pin_signal: PIO1_22/CTIMER2_MAT3/SCT_GPI5/FC4_SSEL3/PLU_OUT4/CAN0_RD, mode: inactive, slew_rate: standard, invert: disabled,
|
|
open_drain: disabled}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
/* clang-format on */
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitCANPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
/* Function assigned for the Cortex-M33 */
|
|
void BOARD_InitCANPins(void)
|
|
{
|
|
/* Enables the clock for the I/O controller.: Enable Clock. */
|
|
CLOCK_EnableClock(kCLOCK_Iocon);
|
|
|
|
const uint32_t port1_pin22_config = (/* Pin is configured as CAN0_RD */
|
|
IOCON_PIO_FUNC9 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN22 (coords: 41) is configured as CAN0_RD */
|
|
IOCON_PinMuxSet(IOCON, 1U, 22U, port1_pin22_config);
|
|
|
|
const uint32_t port1_pin27_config = (/* Pin is configured as CAN0_TD */
|
|
IOCON_PIO_FUNC9 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN27 (coords: 85) is configured as CAN0_TD */
|
|
IOCON_PinMuxSet(IOCON, 1U, 27U, port1_pin27_config);
|
|
}
|
|
/***********************************************************************************************************************
|
|
* EOF
|
|
**********************************************************************************************************************/
|