You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

224 lines
9.0 KiB

/*
* Copyright 2017-2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _BOARD_H_
#define _BOARD_H_
#include "clock_config.h"
#include "fsl_common.h"
#include "fsl_reset.h"
#include "fsl_gpio.h"
#include "fsl_iocon.h"
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @brief The board name */
#define BOARD_NAME "LPCXpresso55S69"
/*! @brief The UART to use for debug messages. */
/* TODO: rename UART to USART */
#define BOARD_DEBUG_UART_TYPE kSerialPort_Uart
#define BOARD_DEBUG_UART_BASEADDR (uint32_t) USART0
#define BOARD_DEBUG_UART_INSTANCE 0U
#define BOARD_DEBUG_UART_CLK_FREQ 12000000U
#define BOARD_DEBUG_UART_CLK_ATTACH kFRO12M_to_FLEXCOMM0
#define BOARD_DEBUG_UART_RST kFC0_RST_SHIFT_RSTn
#define BOARD_DEBUG_UART_CLKSRC kCLOCK_Flexcomm0
#define BOARD_UART_IRQ_HANDLER FLEXCOMM0_IRQHandler
#define BOARD_UART_IRQ FLEXCOMM0_IRQn
#define BOARD_ACCEL_I2C_BASEADDR I2C4
#define BOARD_ACCEL_I2C_CLOCK_FREQ 12000000
#define BOARD_DEBUG_UART_TYPE_CORE1 kSerialPort_Uart
#define BOARD_DEBUG_UART_BASEADDR_CORE1 (uint32_t) USART1
#define BOARD_DEBUG_UART_INSTANCE_CORE1 1U
#define BOARD_DEBUG_UART_CLK_FREQ_CORE1 12000000U
#define BOARD_DEBUG_UART_CLK_ATTACH_CORE1 kFRO12M_to_FLEXCOMM1
#define BOARD_DEBUG_UART_RST_CORE1 kFC1_RST_SHIFT_RSTn
#define BOARD_DEBUG_UART_CLKSRC_CORE1 kCLOCK_Flexcomm1
#define BOARD_UART_IRQ_HANDLER_CORE1 FLEXCOMM1_IRQHandler
#define BOARD_UART_IRQ_CORE1 FLEXCOMM1_IRQn
#ifndef BOARD_DEBUG_UART_BAUDRATE
#define BOARD_DEBUG_UART_BAUDRATE 115200U
#endif /* BOARD_DEBUG_UART_BAUDRATE */
#ifndef BOARD_DEBUG_UART_BAUDRATE_CORE1
#define BOARD_DEBUG_UART_BAUDRATE_CORE1 115200U
#endif /* BOARD_DEBUG_UART_BAUDRATE_CORE1 */
#define BOARD_CODEC_I2C_BASEADDR I2C4
#define BOARD_CODEC_I2C_CLOCK_FREQ 12000000
#define BOARD_CODEC_I2C_INSTANCE 4
#ifndef BOARD_LED_RED_GPIO
#define BOARD_LED_RED_GPIO GPIO
#endif
#define BOARD_LED_RED_GPIO_PORT 1U
#ifndef BOARD_LED_RED_GPIO_PIN
#define BOARD_LED_RED_GPIO_PIN 6U
#endif
#ifndef BOARD_LED_BLUE_GPIO
#define BOARD_LED_BLUE_GPIO GPIO
#endif
#define BOARD_LED_BLUE_GPIO_PORT 1U
#ifndef BOARD_LED_BLUE_GPIO_PIN
#define BOARD_LED_BLUE_GPIO_PIN 4U
#endif
#ifndef BOARD_LED_GREEN_GPIO
#define BOARD_LED_GREEN_GPIO GPIO
#endif
#define BOARD_LED_GREEN_GPIO_PORT 1U
#ifndef BOARD_LED_GREEN_GPIO_PIN
#define BOARD_LED_GREEN_GPIO_PIN 7U
#endif
#ifndef BOARD_SW1_GPIO
#define BOARD_SW1_GPIO GPIO
#endif
#define BOARD_SW1_GPIO_PORT 0U
#ifndef BOARD_SW1_GPIO_PIN
#define BOARD_SW1_GPIO_PIN 5U
#endif
#define BOARD_SW1_NAME "SW1"
#define BOARD_SW1_IRQ PIN_INT0_IRQn
#define BOARD_SW1_IRQ_HANDLER PIN_INT0_IRQHandler
#ifndef BOARD_SW2_GPIO
#define BOARD_SW2_GPIO GPIO
#endif
#define BOARD_SW2_GPIO_PORT 1U
#ifndef BOARD_SW2_GPIO_PIN
#define BOARD_SW2_GPIO_PIN 18U
#endif
#define BOARD_SW2_NAME "SW2"
#define BOARD_SW2_IRQ PIN_INT1_IRQn
#define BOARD_SW2_IRQ_HANDLER PIN_INT1_IRQHandler
#define BOARD_SW2_GPIO_PININT_INDEX 1
#ifndef BOARD_SW3_GPIO
#define BOARD_SW3_GPIO GPIO
#endif
#define BOARD_SW3_GPIO_PORT 1U
#ifndef BOARD_SW3_GPIO_PIN
#define BOARD_SW3_GPIO_PIN 9U
#endif
#define BOARD_SW3_NAME "SW3"
#define BOARD_SW3_IRQ PIN_INT1_IRQn
#define BOARD_SW3_IRQ_HANDLER PIN_INT1_IRQHandler
#define BOARD_SW3_GPIO_PININT_INDEX 1
/* USB PHY condfiguration */
#define BOARD_USB_PHY_D_CAL (0x05U)
#define BOARD_USB_PHY_TXCAL45DP (0x0AU)
#define BOARD_USB_PHY_TXCAL45DM (0x0AU)
/* Board led color mapping */
#define LOGIC_LED_ON 0U
#define LOGIC_LED_OFF 1U
#define LED_RED_INIT(output) \
{ \
IOCON_PinMuxSet(IOCON, BOARD_LED_RED_GPIO_PORT, BOARD_LED_RED_GPIO_PIN, IOCON_DIGITAL_EN); \
GPIO_PinInit(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, BOARD_LED_RED_GPIO_PIN, \
&(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}); /*!< Enable target LED1 */ \
}
#define LED_RED_ON() \
GPIO_PortClear(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \
1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn on target LED1 */
#define LED_RED_OFF() \
GPIO_PortSet(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \
1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn off target LED1 \ \ \ \ \ \ \ \ \ \ \
*/
#define LED_RED_TOGGLE() \
GPIO_PortToggle(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \
1U << BOARD_LED_RED_GPIO_PIN) /*!< Toggle on target LED1 */
#define LED_BLUE_INIT(output) \
{ \
IOCON_PinMuxSet(IOCON, BOARD_LED_BLUE_GPIO_PORT, BOARD_LED_BLUE_GPIO_PIN, IOCON_DIGITAL_EN); \
GPIO_PinInit(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, BOARD_LED_BLUE_GPIO_PIN, \
&(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}); /*!< Enable target LED1 */ \
}
#define LED_BLUE_ON() \
GPIO_PortClear(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \
1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn on target LED1 */
#define LED_BLUE_OFF() \
GPIO_PortSet(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \
1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn off target LED1 */
#define LED_BLUE_TOGGLE() \
GPIO_PortToggle(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \
1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Toggle on target LED1 */
#define LED_GREEN_INIT(output) \
GPIO_PinInit(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, BOARD_LED_GREEN_GPIO_PIN, \
&(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}) /*!< Enable target LED1 */
#define LED_GREEN_ON() \
GPIO_PortClear(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \
1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn on target LED1 */
#define LED_GREEN_OFF() \
GPIO_PortSet(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \
1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn off target LED1 */
#define LED_GREEN_TOGGLE() \
GPIO_PortToggle(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \
1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Toggle on target LED1 */
/* Display. */
#define BOARD_LCD_DC_GPIO GPIO
#define BOARD_LCD_DC_GPIO_PORT 1U
#define BOARD_LCD_DC_GPIO_PIN 5U
/* Serial MWM WIFI */
#define BOARD_SERIAL_MWM_PORT_CLK_FREQ CLOCK_GetFlexCommClkFreq(2)
#define BOARD_SERIAL_MWM_PORT USART2
#define BOARD_SERIAL_MWM_PORT_IRQn FLEXCOMM2_IRQn
#define BOARD_SERIAL_MWM_RST_WRITE(output)
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus */
/*******************************************************************************
* API
******************************************************************************/
void BOARD_InitDebugConsole(void);
void BOARD_InitDebugConsole_Core1(void);
#if defined(SDK_I2C_BASED_COMPONENT_USED) && SDK_I2C_BASED_COMPONENT_USED
void BOARD_I2C_Init(I2C_Type *base, uint32_t clkSrc_Hz);
status_t BOARD_I2C_Send(I2C_Type *base,
uint8_t deviceAddress,
uint32_t subAddress,
uint8_t subaddressSize,
uint8_t *txBuff,
uint8_t txBuffSize);
status_t BOARD_I2C_Receive(I2C_Type *base,
uint8_t deviceAddress,
uint32_t subAddress,
uint8_t subaddressSize,
uint8_t *rxBuff,
uint8_t rxBuffSize);
void BOARD_Accel_I2C_Init(void);
status_t BOARD_Accel_I2C_Send(uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint32_t txBuff);
status_t BOARD_Accel_I2C_Receive(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
void BOARD_Codec_I2C_Init(void);
status_t BOARD_Codec_I2C_Send(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, const uint8_t *txBuff, uint8_t txBuffSize);
status_t BOARD_Codec_I2C_Receive(
uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
#endif /* SDK_I2C_BASED_COMPONENT_USED */
#if defined(__cplusplus)
}
#endif /* __cplusplus */
#endif /* _BOARD_H_ */