/***********************************************************************************************************************
 * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
 * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
 **********************************************************************************************************************/

/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!GlobalInfo
product: Pins v12.0
processor: MIMXRT1052xxxxB
package_id: MIMXRT1052DVL6B
mcu_data: ksdk2_0
processor_version: 12.0.1
pin_labels:
- {pin_num: C7, pin_signal: GPIO_EMC_41, label: LED_B, identifier: LED_R;LED_B}
- {pin_num: B12, pin_signal: GPIO_B1_07, label: LED_G, identifier: LED_G}
- {pin_num: A7, pin_signal: GPIO_EMC_40, label: LED_R, identifier: LED_B;LED_R}
power_domains: {DCDC_IN: '3.3', DCDC_IN_Q: '3.3', DCDC_LP: '1.25', DCDC_PSWITCH: '3.3', DCDC_SENSE: '1.25', NVCC_EMC: '3.3', NVCC_GPIO: '3.3', NVCC_SD0: '3.3', NVCC_SD1: '3.3',
  VDDA_ADC_3P3: '3.3', VDD_HIGH_CAP: '1.1', VDD_HIGH_IN: '3.3', VDD_SNVS_CAP: '1.1', VDD_SNVS_IN: '3.3', VDD_SOC_IN: '1.25', VDD_USB_CAP: '2.5'}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

#include "fsl_common.h"
#include "fsl_iomuxc.h"
#include "fsl_gpio.h"
#include "pin_mux.h"

/* FUNCTION ************************************************************************************************************
 * 
 * Function Name : BOARD_InitBootPins
 * Description   : Calls initialization functions.
 * 
 * END ****************************************************************************************************************/
void BOARD_InitBootPins(void) {
    BOARD_InitDebugPins();
    BOARD_InitLEDPins();
    BOARD_InitSEMCPins();
    BOARD_InitSYSPins();
    BOARD_InitSDPins();
    BOARD_InitFlexSPIPins();
    BOARD_InitUSBPins();
    BOARD_InitLCDPins();
}

/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitDebugPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
  - {pin_num: K14, peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_12}
  - {pin_num: L14, peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_13}
  - {pin_num: F12, peripheral: JTAG, signal: TCK, pin_signal: GPIO_AD_B0_07}
  - {pin_num: F14, peripheral: JTAG, signal: TDI, pin_signal: GPIO_AD_B0_09}
  - {pin_num: G13, peripheral: JTAG, signal: TDO, pin_signal: GPIO_AD_B0_10}
  - {pin_num: E14, peripheral: JTAG, signal: TMS, pin_signal: GPIO_AD_B0_06}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitDebugPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitDebugPins(void) {
  CLOCK_EnableClock(kCLOCK_Iomuxc);           

  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_06_JTAG_TMS, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_07_JTAG_TCK, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_09_JTAG_TDI, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_10_JTAG_TDO, 0U); 
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TXD, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RXD, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0U); 
#endif
}


/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitLEDPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
  - {pin_num: C7, peripheral: GPIO3, signal: 'gpio_io, 27', pin_signal: GPIO_EMC_41, identifier: LED_B, direction: OUTPUT, gpio_init_state: 'true'}
  - {pin_num: B12, peripheral: GPIO2, signal: 'gpio_io, 23', pin_signal: GPIO_B1_07, direction: OUTPUT, gpio_init_state: 'true'}
  - {pin_num: A7, peripheral: GPIO3, signal: 'gpio_io, 26', pin_signal: GPIO_EMC_40, identifier: LED_R, direction: OUTPUT, gpio_init_state: 'true'}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitLEDPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitLEDPins(void) {
  CLOCK_EnableClock(kCLOCK_Iomuxc);           

  /* GPIO configuration of LED_G on GPIO_B1_07 (pin B12) */
  gpio_pin_config_t LED_G_config = {
      .direction = kGPIO_DigitalOutput,
      .outputLogic = 1U,
      .interruptMode = kGPIO_NoIntmode
  };
  /* Initialize GPIO functionality on GPIO_B1_07 (pin B12) */
  GPIO_PinInit(GPIO2, 23U, &LED_G_config);

  /* GPIO configuration of LED_R on GPIO_EMC_40 (pin A7) */
  gpio_pin_config_t LED_R_config = {
      .direction = kGPIO_DigitalOutput,
      .outputLogic = 1U,
      .interruptMode = kGPIO_NoIntmode
  };
  /* Initialize GPIO functionality on GPIO_EMC_40 (pin A7) */
  GPIO_PinInit(GPIO3, 26U, &LED_R_config);

  /* GPIO configuration of LED_B on GPIO_EMC_41 (pin C7) */
  gpio_pin_config_t LED_B_config = {
      .direction = kGPIO_DigitalOutput,
      .outputLogic = 1U,
      .interruptMode = kGPIO_NoIntmode
  };
  /* Initialize GPIO functionality on GPIO_EMC_41 (pin C7) */
  GPIO_PinInit(GPIO3, 27U, &LED_B_config);

  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_07_GPIO2_IO23, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_40_GPIO3_IO26, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_41_GPIO3_IO27, 0U); 
}


/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitSEMCPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
  - {pin_num: E3, peripheral: SEMC, signal: 'DATA, 00', pin_signal: GPIO_EMC_00, hysteresis_enable: Enable, pull_keeper_select: Keeper, speed: MHZ_200, drive_strength: R0_7,
    slew_rate: Fast}
  - {pin_num: F3, peripheral: SEMC, signal: 'DATA, 01', pin_signal: GPIO_EMC_01, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: F4, peripheral: SEMC, signal: 'DATA, 02', pin_signal: GPIO_EMC_02, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: G4, peripheral: SEMC, signal: 'DATA, 03', pin_signal: GPIO_EMC_03, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: F2, peripheral: SEMC, signal: 'DATA, 04', pin_signal: GPIO_EMC_04, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: G5, peripheral: SEMC, signal: 'DATA, 05', pin_signal: GPIO_EMC_05, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: H5, peripheral: SEMC, signal: 'DATA, 06', pin_signal: GPIO_EMC_06, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: H4, peripheral: SEMC, signal: 'DATA, 07', pin_signal: GPIO_EMC_07, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: C6, peripheral: SEMC, signal: 'DATA, 08', pin_signal: GPIO_EMC_30, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: C5, peripheral: SEMC, signal: 'DATA, 09', pin_signal: GPIO_EMC_31, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: D5, peripheral: SEMC, signal: 'DATA, 10', pin_signal: GPIO_EMC_32, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: C4, peripheral: SEMC, signal: 'DATA, 11', pin_signal: GPIO_EMC_33, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: E5, peripheral: SEMC, signal: 'DATA, 13', pin_signal: GPIO_EMC_35, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: D4, peripheral: SEMC, signal: 'DATA, 12', pin_signal: GPIO_EMC_34, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: C3, peripheral: SEMC, signal: 'DATA, 14', pin_signal: GPIO_EMC_36, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: E4, peripheral: SEMC, signal: 'DATA, 15', pin_signal: GPIO_EMC_37, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: C2, peripheral: SEMC, signal: 'ADDR, 00', pin_signal: GPIO_EMC_09, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: G1, peripheral: SEMC, signal: 'ADDR, 01', pin_signal: GPIO_EMC_10, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: G3, peripheral: SEMC, signal: 'ADDR, 02', pin_signal: GPIO_EMC_11, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: H1, peripheral: SEMC, signal: 'ADDR, 03', pin_signal: GPIO_EMC_12, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: A6, peripheral: SEMC, signal: 'ADDR, 04', pin_signal: GPIO_EMC_13, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: B6, peripheral: SEMC, signal: 'ADDR, 05', pin_signal: GPIO_EMC_14, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: B1, peripheral: SEMC, signal: 'ADDR, 06', pin_signal: GPIO_EMC_15, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: A5, peripheral: SEMC, signal: 'ADDR, 07', pin_signal: GPIO_EMC_16, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: A4, peripheral: SEMC, signal: 'ADDR, 08', pin_signal: GPIO_EMC_17, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: B2, peripheral: SEMC, signal: 'ADDR, 09', pin_signal: GPIO_EMC_18, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: G2, peripheral: SEMC, signal: 'ADDR, 10', pin_signal: GPIO_EMC_23, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: B4, peripheral: SEMC, signal: 'ADDR, 11', pin_signal: GPIO_EMC_19, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: A3, peripheral: SEMC, signal: 'ADDR, 12', pin_signal: GPIO_EMC_20, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: C1, peripheral: SEMC, signal: 'BA, 0', pin_signal: GPIO_EMC_21, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: F1, peripheral: SEMC, signal: 'BA, 1', pin_signal: GPIO_EMC_22, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: H3, peripheral: SEMC, signal: 'DM, 0', pin_signal: GPIO_EMC_08, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: D6, peripheral: SEMC, signal: 'DM, 1', pin_signal: GPIO_EMC_38, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: B3, peripheral: SEMC, signal: semc_clk, pin_signal: GPIO_EMC_26, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: A2, peripheral: SEMC, signal: semc_cke, pin_signal: GPIO_EMC_27, hysteresis_enable: Enable, pull_keeper_select: Keeper, speed: MHZ_200, drive_strength: R0_7,
    slew_rate: Fast}
  - {pin_num: E1, peripheral: SEMC, signal: 'CS, 0', pin_signal: GPIO_EMC_29, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: D2, peripheral: SEMC, signal: semc_ras, pin_signal: GPIO_EMC_25, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: D3, peripheral: SEMC, signal: semc_cas, pin_signal: GPIO_EMC_24, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
  - {pin_num: B7, peripheral: SEMC, signal: semc_dqs, pin_signal: GPIO_EMC_39, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitSEMCPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitSEMCPins(void) {
  CLOCK_EnableClock(kCLOCK_Iomuxc);           

#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_00_SEMC_DA00, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_00_SEMC_DATA00, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_01_SEMC_DA01, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_01_SEMC_DATA01, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_02_SEMC_DA02, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_02_SEMC_DATA02, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_03_SEMC_DA03, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_03_SEMC_DATA03, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_04_SEMC_DA04, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_04_SEMC_DATA04, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_05_SEMC_DA05, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_05_SEMC_DATA05, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_06_SEMC_DA06, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_06_SEMC_DATA06, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_07_SEMC_DA07, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_07_SEMC_DATA07, 0U); 
#endif
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_08_SEMC_DM00, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_09_SEMC_ADDR00, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_10_SEMC_ADDR01, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_11_SEMC_ADDR02, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_12_SEMC_ADDR03, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_13_SEMC_ADDR04, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_14_SEMC_ADDR05, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_15_SEMC_ADDR06, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_16_SEMC_ADDR07, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_17_SEMC_ADDR08, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_18_SEMC_ADDR09, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_19_SEMC_ADDR11, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_20_SEMC_ADDR12, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_21_SEMC_BA0, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_22_SEMC_BA1, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_23_SEMC_ADDR10, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_24_SEMC_CAS, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_25_SEMC_RAS, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_26_SEMC_CLK, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_27_SEMC_CKE, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_29_SEMC_CS0, 0U); 
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_30_SEMC_DA08, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_30_SEMC_DATA08, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_31_SEMC_DA09, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_31_SEMC_DATA09, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_32_SEMC_DA10, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_32_SEMC_DATA10, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_33_SEMC_DA11, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_33_SEMC_DATA11, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_34_SEMC_DA12, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_34_SEMC_DATA12, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_35_SEMC_DA13, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_35_SEMC_DATA13, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_36_SEMC_DA14, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_36_SEMC_DATA14, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_37_SEMC_DA15, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_37_SEMC_DATA15, 0U); 
#endif
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_38_SEMC_DM01, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_39_SEMC_DQS, 0U); 
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_00_SEMC_DA00, 0x0110F9U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_00_SEMC_DATA00, 0x0110F9U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_01_SEMC_DA01, 0x0110F9U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_01_SEMC_DATA01, 0x0110F9U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_02_SEMC_DA02, 0x0110F9U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_02_SEMC_DATA02, 0x0110F9U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_03_SEMC_DA03, 0x0110F9U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_03_SEMC_DATA03, 0x0110F9U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_04_SEMC_DA04, 0x0110F9U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_04_SEMC_DATA04, 0x0110F9U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_05_SEMC_DA05, 0x0110F9U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_05_SEMC_DATA05, 0x0110F9U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_06_SEMC_DA06, 0x0110F9U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_06_SEMC_DATA06, 0x0110F9U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_07_SEMC_DA07, 0x0110F9U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_07_SEMC_DATA07, 0x0110F9U); 
#endif
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_08_SEMC_DM00, 0x0110F9U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_09_SEMC_ADDR00, 0x0110F9U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_10_SEMC_ADDR01, 0x0110F9U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_11_SEMC_ADDR02, 0x0110F9U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_12_SEMC_ADDR03, 0x0110F9U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_13_SEMC_ADDR04, 0x0110F9U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_14_SEMC_ADDR05, 0x0110F9U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_15_SEMC_ADDR06, 0x0110F9U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_16_SEMC_ADDR07, 0x0110F9U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_17_SEMC_ADDR08, 0x0110F9U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_18_SEMC_ADDR09, 0x0110F9U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_19_SEMC_ADDR11, 0x0110F9U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_20_SEMC_ADDR12, 0x0110F9U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_21_SEMC_BA0, 0x0110F9U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_22_SEMC_BA1, 0x0110F9U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_23_SEMC_ADDR10, 0x0110F9U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_24_SEMC_CAS, 0x0110F9U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_25_SEMC_RAS, 0x0110F9U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_26_SEMC_CLK, 0x0110F9U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_27_SEMC_CKE, 0x0110F9U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_29_SEMC_CS0, 0x0110F9U); 
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_30_SEMC_DA08, 0x0110F9U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_30_SEMC_DATA08, 0x0110F9U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_31_SEMC_DA09, 0x0110F9U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_31_SEMC_DATA09, 0x0110F9U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_32_SEMC_DA10, 0x0110F9U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_32_SEMC_DATA10, 0x0110F9U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_33_SEMC_DA11, 0x0110F9U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_33_SEMC_DATA11, 0x0110F9U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_34_SEMC_DA12, 0x0110F9U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_34_SEMC_DATA12, 0x0110F9U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_35_SEMC_DA13, 0x0110F9U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_35_SEMC_DATA13, 0x0110F9U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_36_SEMC_DA14, 0x0110F9U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_36_SEMC_DATA14, 0x0110F9U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_37_SEMC_DA15, 0x0110F9U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_37_SEMC_DATA15, 0x0110F9U); 
#endif
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_38_SEMC_DM01, 0x0110F9U); 
  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_39_SEMC_DQS, 0x0110F9U); 
}


/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitSYSPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
  - {pin_num: N1, peripheral: SUPPLY, signal: 'DCDC_GND, 0', pin_signal: DCDC_GND0}
  - {pin_num: N2, peripheral: SUPPLY, signal: 'DCDC_GND, 1', pin_signal: DCDC_GND1}
  - {pin_num: L1, peripheral: SUPPLY, signal: 'DCDC_IN, 0', pin_signal: DCDC_IN0}
  - {pin_num: L2, peripheral: SUPPLY, signal: 'DCDC_IN, 1', pin_signal: DCDC_IN1}
  - {pin_num: K4, peripheral: SUPPLY, signal: dcdc_in_q, pin_signal: DCDC_IN_Q}
  - {pin_num: M1, peripheral: SUPPLY, signal: 'DCDC_LP, 0', pin_signal: DCDC_LP0}
  - {pin_num: M2, peripheral: SUPPLY, signal: 'DCDC_LP, 1', pin_signal: DCDC_LP1}
  - {pin_num: K3, peripheral: SUPPLY, signal: dcdc_pswitch, pin_signal: DCDC_PSWITCH}
  - {pin_num: J5, peripheral: SUPPLY, signal: dcdc_sense, pin_signal: DCDC_SENSE}
  - {pin_num: N10, peripheral: SUPPLY, signal: gpanaio, pin_signal: GPANAIO}
  - {pin_num: K9, peripheral: SUPPLY, signal: ngnd_kel0, pin_signal: NGND_KEL0}
  - {pin_num: F5, peripheral: SUPPLY, signal: 'NVCC_EMC, 0', pin_signal: NVCC_EMC0}
  - {pin_num: E6, peripheral: SUPPLY, signal: 'NVCC_EMC, 1', pin_signal: NVCC_EMC1}
  - {pin_num: E9, peripheral: SUPPLY, signal: 'NVCC_GPIO, 0', pin_signal: NVCC_GPIO0}
  - {pin_num: F10, peripheral: SUPPLY, signal: 'NVCC_GPIO, 1', pin_signal: NVCC_GPIO1}
  - {pin_num: J10, peripheral: SUPPLY, signal: 'NVCC_GPIO, 2', pin_signal: NVCC_GPIO2}
  - {pin_num: P10, peripheral: SUPPLY, signal: nvcc_pll, pin_signal: NVCC_PLL}
  - {pin_num: J6, peripheral: SUPPLY, signal: nvcc_sd0, pin_signal: NVCC_SD0}
  - {pin_num: K5, peripheral: SUPPLY, signal: nvcc_sd1, pin_signal: NVCC_SD1}
  - {pin_num: K6, peripheral: SUPPLY, signal: test_mode, pin_signal: TEST_MODE}
  - {pin_num: N12, peripheral: SUPPLY, signal: usb_otg1_chd_b, pin_signal: USB_OTG1_CHD_B}
  - {pin_num: M8, peripheral: SUPPLY, signal: usb_otg1_dn, pin_signal: USB_OTG1_DN}
  - {pin_num: L8, peripheral: SUPPLY, signal: usb_otg1_dp, pin_signal: USB_OTG1_DP}
  - {pin_num: N6, peripheral: SUPPLY, signal: usb_otg1_vbus, pin_signal: USB_OTG1_VBUS}
  - {pin_num: N7, peripheral: SUPPLY, signal: usb_otg2_dn, pin_signal: USB_OTG2_DN}
  - {pin_num: P7, peripheral: SUPPLY, signal: usb_otg2_dp, pin_signal: USB_OTG2_DP}
  - {pin_num: P6, peripheral: SUPPLY, signal: usb_otg2_vbus, pin_signal: USB_OTG2_VBUS}
  - {pin_num: P8, peripheral: SUPPLY, signal: VDD_HIGH_CAP, pin_signal: VDD_HIGH_CAP}
  - {pin_num: P12, peripheral: SUPPLY, signal: VDD_HIGH_IN, pin_signal: VDD_HIGH_IN}
  - {pin_num: M10, peripheral: SUPPLY, signal: VDD_SNVS_CAP, pin_signal: VDD_SNVS_CAP}
  - {pin_num: M9, peripheral: SUPPLY, signal: VDD_SNVS_IN, pin_signal: VDD_SNVS_IN}
  - {pin_num: F6, peripheral: SUPPLY, signal: 'VDD_SOC_IN, 0', pin_signal: VDD_SOC_IN0}
  - {pin_num: G6, peripheral: SUPPLY, signal: 'VDD_SOC_IN, 1', pin_signal: VDD_SOC_IN1}
  - {pin_num: H6, peripheral: SUPPLY, signal: 'VDD_SOC_IN, 2', pin_signal: VDD_SOC_IN2}
  - {pin_num: F7, peripheral: SUPPLY, signal: 'VDD_SOC_IN, 3', pin_signal: VDD_SOC_IN3}
  - {pin_num: F8, peripheral: SUPPLY, signal: 'VDD_SOC_IN, 4', pin_signal: VDD_SOC_IN4}
  - {pin_num: F9, peripheral: SUPPLY, signal: 'VDD_SOC_IN, 5', pin_signal: VDD_SOC_IN5}
  - {pin_num: G9, peripheral: SUPPLY, signal: 'VDD_SOC_IN, 6', pin_signal: VDD_SOC_IN6}
  - {pin_num: H9, peripheral: SUPPLY, signal: 'VDD_SOC_IN, 7', pin_signal: VDD_SOC_IN7}
  - {pin_num: J9, peripheral: SUPPLY, signal: 'VDD_SOC_IN, 8', pin_signal: VDD_SOC_IN8}
  - {pin_num: K8, peripheral: SUPPLY, signal: VDD_USB_CAP, pin_signal: VDD_USB_CAP}
  - {pin_num: N14, peripheral: SUPPLY, signal: VDDA_ADC_3P3, pin_signal: VDDA_ADC_3P3}
  - {pin_num: A1, peripheral: SUPPLY, signal: 'VSS, 0', pin_signal: VSS0}
  - {pin_num: P1, peripheral: SUPPLY, signal: 'VSS, 1', pin_signal: VSS1}
  - {pin_num: E2, peripheral: SUPPLY, signal: 'VSS, 2', pin_signal: VSS2}
  - {pin_num: K2, peripheral: SUPPLY, signal: 'VSS, 3', pin_signal: VSS3}
  - {pin_num: B5, peripheral: SUPPLY, signal: 'VSS, 4', pin_signal: VSS4}
  - {pin_num: N5, peripheral: SUPPLY, signal: 'VSS, 5', pin_signal: VSS5}
  - {pin_num: G7, peripheral: SUPPLY, signal: 'VSS, 6', pin_signal: VSS6}
  - {pin_num: H7, peripheral: SUPPLY, signal: 'VSS, 7', pin_signal: VSS7}
  - {pin_num: J7, peripheral: SUPPLY, signal: 'VSS, 8', pin_signal: VSS8}
  - {pin_num: G8, peripheral: SUPPLY, signal: 'VSS, 9', pin_signal: VSS9}
  - {pin_num: H8, peripheral: SUPPLY, signal: 'VSS, 10', pin_signal: VSS10}
  - {pin_num: J8, peripheral: SUPPLY, signal: 'VSS, 11', pin_signal: VSS11}
  - {pin_num: N8, peripheral: SUPPLY, signal: 'VSS, 12', pin_signal: VSS12}
  - {pin_num: L9, peripheral: SUPPLY, signal: 'VSS, 13', pin_signal: VSS13}
  - {pin_num: B10, peripheral: SUPPLY, signal: 'VSS, 14', pin_signal: VSS14}
  - {pin_num: E13, peripheral: SUPPLY, signal: 'VSS, 15', pin_signal: VSS15}
  - {pin_num: K13, peripheral: SUPPLY, signal: 'VSS, 16', pin_signal: VSS16}
  - {pin_num: A14, peripheral: SUPPLY, signal: 'VSS, 17', pin_signal: VSS17}
  - {pin_num: P14, peripheral: SUPPLY, signal: 'VSS, 18', pin_signal: VSS18}
  - {pin_num: K7, peripheral: SNVS, signal: snvs_pmic_on_req, pin_signal: PMIC_ON_REQ}
  - {pin_num: P11, peripheral: XTALOSC24M, signal: xtali, pin_signal: XTALI}
  - {pin_num: N11, peripheral: XTALOSC24M, signal: xtalo, pin_signal: XTALO}
  - {pin_num: N9, peripheral: XTALOSC24M, signal: rtc_xtali, pin_signal: RTC_XTALI}
  - {pin_num: P9, peripheral: XTALOSC24M, signal: rtc_xtalo, pin_signal: RTC_XTALO}
  - {pin_num: M7, peripheral: SRC, signal: POR_B, pin_signal: POR_B}
  - {pin_num: M6, peripheral: SRC, signal: RESET_B, pin_signal: ONOFF}
  - {pin_num: P13, peripheral: CCM, signal: CLK1_N, pin_signal: CCM_CLK1_N}
  - {pin_num: N13, peripheral: CCM, signal: CLK1_P, pin_signal: CCM_CLK1_P}
  - {pin_num: L7, peripheral: CCM, signal: PMIC_STBY_REQ, pin_signal: PMIC_STBY_REQ}
  - {pin_num: D14, peripheral: WDOG1, signal: wdog_b, pin_signal: GPIO_B1_13}
  - {pin_num: N14, peripheral: CMP1, signal: DAC_6bit_VIN1, pin_signal: VDDA_ADC_3P3}
  - {pin_num: N14, peripheral: CMP1, signal: DAC_6bit_VIN2, pin_signal: VDDA_ADC_3P3}
  - {pin_num: N14, peripheral: CMP2, signal: DAC_6bit_VIN1, pin_signal: VDDA_ADC_3P3}
  - {pin_num: N14, peripheral: CMP2, signal: DAC_6bit_VIN2, pin_signal: VDDA_ADC_3P3}
  - {pin_num: N14, peripheral: CMP3, signal: DAC_6bit_VIN1, pin_signal: VDDA_ADC_3P3}
  - {pin_num: N14, peripheral: CMP3, signal: DAC_6bit_VIN2, pin_signal: VDDA_ADC_3P3}
  - {pin_num: N14, peripheral: CMP4, signal: DAC_6bit_VIN2, pin_signal: VDDA_ADC_3P3}
  - {pin_num: N14, peripheral: CMP4, signal: DAC_6bit_VIN1, pin_signal: VDDA_ADC_3P3}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitSYSPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitSYSPins(void) {
  CLOCK_EnableClock(kCLOCK_Iomuxc);           
  CLOCK_EnableClock(kCLOCK_IomuxcSnvs);       

  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_13_WDOG1_B, 0U); 
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_SNVS_PMIC_ON_REQ_SNVS_PMIC_ON_REQ, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_SNVS_PMIC_ON_REQ_SNVS_LP_PMIC_ON_REQ, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_SNVS_PMIC_STBY_REQ_CCM_PMIC_STBY_REQ, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_SNVS_PMIC_STBY_REQ_CCM_PMIC_VSTBY_REQ, 0U); 
#endif
}


/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitSDPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
  - {pin_num: J1, peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_02}
  - {pin_num: J4, peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_00}
  - {pin_num: J3, peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_01}
  - {pin_num: K1, peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_03}
  - {pin_num: H2, peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_04}
  - {pin_num: J2, peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_05}
  - {pin_num: D13, peripheral: USDHC1, signal: usdhc_cd_b, pin_signal: GPIO_B1_12}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitSDPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitSDPins(void) {
  CLOCK_EnableClock(kCLOCK_Iomuxc);           

  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_12_USDHC1_CD_B, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_00_USDHC1_CMD, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_01_USDHC1_CLK, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3, 0U); 
}


/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitFlexSPIPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
  - {pin_num: P3, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08, hysteresis_enable: Enable, speed: MHZ_200}
  - {pin_num: N4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_09, hysteresis_enable: Enable, speed: MHZ_200}
  - {pin_num: P4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_10, hysteresis_enable: Enable, speed: MHZ_200}
  - {pin_num: P5, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_11, hysteresis_enable: Enable, speed: MHZ_200}
  - {pin_num: L3, peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_06, hysteresis_enable: Enable, speed: MHZ_200}
  - {pin_num: L4, peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07, hysteresis_enable: Enable, speed: MHZ_200}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitFlexSPIPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitFlexSPIPins(void) {
  CLOCK_EnableClock(kCLOCK_Iomuxc);           

#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPI_A_SS0_B, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPIA_SS0_B, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPI_A_SCLK, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPIA_SCLK, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPI_A_DATA00, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPIA_DATA00, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPI_A_DATA1, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPIA_DATA01, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPI_A_DATA2, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPIA_DATA02, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPI_A_DATA3, 0U); 
#else
  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPIA_DATA03, 0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B1_06_FLEXSPI_A_SS0_B, 0x0110F0U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B1_06_FLEXSPIA_SS0_B, 0x0110F0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B1_07_FLEXSPI_A_SCLK, 0x0110F0U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B1_07_FLEXSPIA_SCLK, 0x0110F0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B1_08_FLEXSPI_A_DATA00, 0x0110F0U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B1_08_FLEXSPIA_DATA00, 0x0110F0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B1_09_FLEXSPI_A_DATA1, 0x0110F0U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B1_09_FLEXSPIA_DATA01, 0x0110F0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B1_10_FLEXSPI_A_DATA2, 0x0110F0U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B1_10_FLEXSPIA_DATA02, 0x0110F0U); 
#endif
#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
  IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B1_11_FLEXSPI_A_DATA3, 0x0110F0U); 
#else
  IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B1_11_FLEXSPIA_DATA03, 0x0110F0U); 
#endif
}


/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitUSBPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
  - {pin_num: H10, peripheral: USB1, signal: usb_otg1_id, pin_signal: GPIO_AD_B0_01}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitUSBPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitUSBPins(void) {
  CLOCK_EnableClock(kCLOCK_Iomuxc);           

  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_01_USB_OTG1_ID, 0U); 
}


/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitLCDPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
  - {pin_num: D7, peripheral: LCDIF, signal: lcdif_clk, pin_signal: GPIO_B0_00}
  - {pin_num: C8, peripheral: LCDIF, signal: 'lcdif_data, 00', pin_signal: GPIO_B0_04}
  - {pin_num: B8, peripheral: LCDIF, signal: 'lcdif_data, 01', pin_signal: GPIO_B0_05}
  - {pin_num: A8, peripheral: LCDIF, signal: 'lcdif_data, 02', pin_signal: GPIO_B0_06}
  - {pin_num: A9, peripheral: LCDIF, signal: 'lcdif_data, 03', pin_signal: GPIO_B0_07}
  - {pin_num: B9, peripheral: LCDIF, signal: 'lcdif_data, 04', pin_signal: GPIO_B0_08}
  - {pin_num: C9, peripheral: LCDIF, signal: 'lcdif_data, 05', pin_signal: GPIO_B0_09}
  - {pin_num: D9, peripheral: LCDIF, signal: 'lcdif_data, 06', pin_signal: GPIO_B0_10}
  - {pin_num: A10, peripheral: LCDIF, signal: 'lcdif_data, 07', pin_signal: GPIO_B0_11}
  - {pin_num: C10, peripheral: LCDIF, signal: 'lcdif_data, 08', pin_signal: GPIO_B0_12}
  - {pin_num: D10, peripheral: LCDIF, signal: 'lcdif_data, 09', pin_signal: GPIO_B0_13}
  - {pin_num: E10, peripheral: LCDIF, signal: 'lcdif_data, 10', pin_signal: GPIO_B0_14}
  - {pin_num: E11, peripheral: LCDIF, signal: 'lcdif_data, 11', pin_signal: GPIO_B0_15}
  - {pin_num: B11, peripheral: LCDIF, signal: 'lcdif_data, 13', pin_signal: GPIO_B1_01}
  - {pin_num: A11, peripheral: LCDIF, signal: 'lcdif_data, 12', pin_signal: GPIO_B1_00}
  - {pin_num: C11, peripheral: LCDIF, signal: 'lcdif_data, 14', pin_signal: GPIO_B1_02}
  - {pin_num: D11, peripheral: LCDIF, signal: 'lcdif_data, 15', pin_signal: GPIO_B1_03}
  - {pin_num: E7, peripheral: LCDIF, signal: lcdif_enable, pin_signal: GPIO_B0_01}
  - {pin_num: E8, peripheral: LCDIF, signal: lcdif_hsync, pin_signal: GPIO_B0_02}
  - {pin_num: D8, peripheral: LCDIF, signal: lcdif_vsync, pin_signal: GPIO_B0_03}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitLCDPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitLCDPins(void) {
  CLOCK_EnableClock(kCLOCK_Iomuxc);           

  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_00_LCD_CLK, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_04_LCD_DATA00, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_05_LCD_DATA01, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_06_LCD_DATA02, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_07_LCD_DATA03, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_08_LCD_DATA04, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_09_LCD_DATA05, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_10_LCD_DATA06, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_11_LCD_DATA07, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_12_LCD_DATA08, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_13_LCD_DATA09, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_14_LCD_DATA10, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_15_LCD_DATA11, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_00_LCD_DATA12, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_01_LCD_DATA13, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_02_LCD_DATA14, 0U); 
  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_03_LCD_DATA15, 0U); 
}

/***********************************************************************************************************************
 * EOF
 **********************************************************************************************************************/