221 lines
9.9 KiB
C
221 lines
9.9 KiB
C
/***********************************************************************************************************************
|
|
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
|
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
|
**********************************************************************************************************************/
|
|
/*
|
|
* How to setup clock using clock driver functions:
|
|
*
|
|
* 1. CLOCK_SetSimSafeDivs, to make sure core clock, bus clock, flexbus clock
|
|
* and flash clock are in allowed range during clock mode switch.
|
|
*
|
|
* 2. Call CLOCK_Osc0Init to setup OSC clock, if it is used in target mode.
|
|
*
|
|
* 3. Set MCG configuration, MCG includes three parts: FLL clock, PLL clock and
|
|
* internal reference clock(MCGIRCLK). Follow the steps to setup:
|
|
*
|
|
* 1). Call CLOCK_BootToXxxMode to set MCG to target mode.
|
|
*
|
|
* 2). If target mode is FBI/BLPI/PBI mode, the MCGIRCLK has been configured
|
|
* correctly. For other modes, need to call CLOCK_SetInternalRefClkConfig
|
|
* explicitly to setup MCGIRCLK.
|
|
*
|
|
* 3). Don't need to configure FLL explicitly, because if target mode is FLL
|
|
* mode, then FLL has been configured by the function CLOCK_BootToXxxMode,
|
|
* if the target mode is not FLL mode, the FLL is disabled.
|
|
*
|
|
* 4). If target mode is PEE/PBE/PEI/PBI mode, then the related PLL has been
|
|
* setup by CLOCK_BootToXxxMode. In FBE/FBI/FEE/FBE mode, the PLL could
|
|
* be enabled independently, call CLOCK_EnablePll0 explicitly in this case.
|
|
*
|
|
* 4. Call CLOCK_SetSimConfig to set the clock configuration in SIM.
|
|
*/
|
|
|
|
/* clang-format off */
|
|
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
!!GlobalInfo
|
|
product: Clocks v9.0
|
|
processor: MK60DN512xxx10
|
|
package_id: MK60DN512VLQ10
|
|
mcu_data: ksdk2_0
|
|
processor_version: 11.0.1
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
|
/* clang-format on */
|
|
|
|
#include "fsl_rtc.h"
|
|
#include "clock_config.h"
|
|
|
|
/*******************************************************************************
|
|
* Definitions
|
|
******************************************************************************/
|
|
#define MCG_IRCLK_DISABLE 0U /*!< MCGIRCLK disabled */
|
|
#define MCG_PLL_DISABLE 0U /*!< MCGPLLCLK disabled */
|
|
#define OSC_ER_CLK_DISABLE 0U /*!< Disable external reference clock */
|
|
#define RTC_OSC_CAP_LOAD_12PF 0x1800U /*!< RTC oscillator capacity load: 12pF */
|
|
#define RTC_RTC32KCLK_PERIPHERALS_ENABLED 1U /*!< RTC32KCLK to other peripherals: enabled */
|
|
#define SIM_OSC32KSEL_OSC32KCLK_CLK 0U /*!< OSC32KSEL select: OSC32KCLK clock */
|
|
#define SIM_PLLFLLSEL_MCGFLLCLK_CLK 0U /*!< PLLFLL select: MCGFLLCLK clock */
|
|
|
|
/*******************************************************************************
|
|
* Variables
|
|
******************************************************************************/
|
|
/* System clock frequency. */
|
|
extern uint32_t SystemCoreClock;
|
|
|
|
/*******************************************************************************
|
|
* Code
|
|
******************************************************************************/
|
|
/*FUNCTION**********************************************************************
|
|
*
|
|
* Function Name : CLOCK_CONFIG_FllStableDelay
|
|
* Description : This function is used to delay for FLL stable.
|
|
*
|
|
*END**************************************************************************/
|
|
static void CLOCK_CONFIG_FllStableDelay(void)
|
|
{
|
|
uint32_t i = 30000U;
|
|
while (i--)
|
|
{
|
|
__NOP();
|
|
}
|
|
}
|
|
|
|
/*FUNCTION**********************************************************************
|
|
*
|
|
* Function Name : CLOCK_CONFIG_SetRtcClock
|
|
* Description : This function is used to configuring RTC clock including
|
|
* enabling RTC oscillator.
|
|
* Param capLoad : RTC oscillator capacity load
|
|
* Param enableOutPeriph : Enable (1U)/Disable (0U) clock to peripherals
|
|
*
|
|
*END**************************************************************************/
|
|
static void CLOCK_CONFIG_SetRtcClock(uint32_t capLoad, uint8_t enableOutPeriph)
|
|
{
|
|
/* RTC clock gate enable */
|
|
CLOCK_EnableClock(kCLOCK_Rtc0);
|
|
if ((RTC->CR & RTC_CR_OSCE_MASK) == 0u) { /* Only if the Rtc oscillator is not already enabled */
|
|
/* Set the specified capacitor configuration for the RTC oscillator */
|
|
RTC_SetOscCapLoad(RTC, capLoad);
|
|
/* Enable the RTC 32KHz oscillator */
|
|
RTC->CR |= RTC_CR_OSCE_MASK;
|
|
}
|
|
/* Output to other peripherals */
|
|
if (enableOutPeriph) {
|
|
RTC->CR &= ~RTC_CR_CLKO_MASK;
|
|
}
|
|
else {
|
|
RTC->CR |= RTC_CR_CLKO_MASK;
|
|
}
|
|
/* Set the XTAL32/RTC_CLKIN frequency based on board setting. */
|
|
CLOCK_SetXtal32Freq(BOARD_XTAL32K_CLK_HZ);
|
|
/* Set RTC_TSR if there is fault value in RTC */
|
|
if (RTC->SR & RTC_SR_TIF_MASK) {
|
|
RTC -> TSR = RTC -> TSR;
|
|
}
|
|
/* RTC clock gate disable */
|
|
CLOCK_DisableClock(kCLOCK_Rtc0);
|
|
}
|
|
|
|
/*******************************************************************************
|
|
************************ BOARD_InitBootClocks function ************************
|
|
******************************************************************************/
|
|
void BOARD_InitBootClocks(void)
|
|
{
|
|
BOARD_BootClockRUN();
|
|
}
|
|
|
|
/*******************************************************************************
|
|
********************** Configuration BOARD_BootClockRUN ***********************
|
|
******************************************************************************/
|
|
/* clang-format off */
|
|
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
!!Configuration
|
|
name: BOARD_BootClockRUN
|
|
called_from_default_init: true
|
|
outputs:
|
|
- {id: Bus_clock.outFreq, value: 50 MHz}
|
|
- {id: Core_clock.outFreq, value: 50 MHz}
|
|
- {id: Flash_clock.outFreq, value: 25 MHz}
|
|
- {id: FlexBus_clock.outFreq, value: 50 MHz}
|
|
- {id: LPO_clock.outFreq, value: 1 kHz}
|
|
- {id: MCGFFCLK.outFreq, value: 39.0625 kHz}
|
|
- {id: PLLFLLCLK.outFreq, value: 25 MHz}
|
|
- {id: System_clock.outFreq, value: 50 MHz}
|
|
settings:
|
|
- {id: MCGMode, value: FBE}
|
|
- {id: MCG.CLKS.sel, value: MCG.OSCSEL}
|
|
- {id: MCG.FRDIV.scale, value: '1280'}
|
|
- {id: MCG.IREFS.sel, value: MCG.FRDIV}
|
|
- {id: MCG.PRDIV.scale, value: '13'}
|
|
- {id: MCG_C2_RANGE0_CFG, value: Very_high}
|
|
- {id: MCG_C2_RANGE0_FRDIV_CFG, value: Very_high}
|
|
- {id: OSC_CR_SYS_OSC_CAP_LOAD_CFG, value: SC18PF}
|
|
- {id: RTC_CR_OSCE_CFG, value: Enabled}
|
|
- {id: RTC_CR_OSC_CAP_LOAD_CFG, value: SC12PF}
|
|
sources:
|
|
- {id: OSC.OSC.outFreq, value: 50 MHz, enabled: true}
|
|
- {id: RTC.RTC32kHz.outFreq, value: 32.768 kHz, enabled: true}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
|
/* clang-format on */
|
|
|
|
/*******************************************************************************
|
|
* Variables for BOARD_BootClockRUN configuration
|
|
******************************************************************************/
|
|
const mcg_config_t mcgConfig_BOARD_BootClockRUN =
|
|
{
|
|
.mcgMode = kMCG_ModeFBE, /* FBE - FLL Bypassed External */
|
|
.irclkEnableMode = MCG_IRCLK_DISABLE, /* MCGIRCLK disabled */
|
|
.ircs = kMCG_IrcSlow, /* Slow internal reference clock selected */
|
|
.fcrdiv = 0x1U, /* Fast IRC divider: divided by 2 */
|
|
.frdiv = 0x6U, /* FLL reference clock divider: divided by 1280 */
|
|
.drs = kMCG_DrsLow, /* Low frequency range */
|
|
.dmx32 = kMCG_Dmx32Default, /* DCO has a default range of 25% */
|
|
.oscsel = kMCG_OscselOsc, /* Selects System Oscillator (OSCCLK) */
|
|
.pll0Config =
|
|
{
|
|
.enableMode = MCG_PLL_DISABLE, /* MCGPLLCLK disabled */
|
|
.prdiv = 0xcU, /* PLL Reference divider: divided by 13 */
|
|
.vdiv = 0x0U, /* VCO divider: multiplied by 24 */
|
|
},
|
|
};
|
|
const sim_clock_config_t simConfig_BOARD_BootClockRUN =
|
|
{
|
|
.pllFllSel = SIM_PLLFLLSEL_MCGFLLCLK_CLK, /* PLLFLL select: MCGFLLCLK clock */
|
|
.er32kSrc = SIM_OSC32KSEL_OSC32KCLK_CLK, /* OSC32KSEL select: OSC32KCLK clock */
|
|
.clkdiv1 = 0x10000U, /* SIM_CLKDIV1 - OUTDIV1: /1, OUTDIV2: /1, OUTDIV3: /1, OUTDIV4: /2 */
|
|
};
|
|
const osc_config_t oscConfig_BOARD_BootClockRUN =
|
|
{
|
|
.freq = 50000000U, /* Oscillator frequency: 50000000Hz */
|
|
.capLoad = (kOSC_Cap2P | kOSC_Cap16P), /* Oscillator capacity load: 18pF */
|
|
.workMode = kOSC_ModeExt, /* Use external clock */
|
|
.oscerConfig =
|
|
{
|
|
.enableMode = OSC_ER_CLK_DISABLE, /* Disable external reference clock */
|
|
}
|
|
};
|
|
|
|
/*******************************************************************************
|
|
* Code for BOARD_BootClockRUN configuration
|
|
******************************************************************************/
|
|
void BOARD_BootClockRUN(void)
|
|
{
|
|
/* Set the system clock dividers in SIM to safe value. */
|
|
CLOCK_SetSimSafeDivs();
|
|
/* Configure RTC clock including enabling RTC oscillator. */
|
|
CLOCK_CONFIG_SetRtcClock(RTC_OSC_CAP_LOAD_12PF, RTC_RTC32KCLK_PERIPHERALS_ENABLED);
|
|
/* Initializes OSC0 according to board configuration. */
|
|
CLOCK_InitOsc0(&oscConfig_BOARD_BootClockRUN);
|
|
CLOCK_SetXtal0Freq(oscConfig_BOARD_BootClockRUN.freq);
|
|
/* Set MCG to FBE mode. */
|
|
CLOCK_SetExternalRefClkConfig(mcgConfig_BOARD_BootClockRUN.oscsel);
|
|
CLOCK_SetFbeMode(mcgConfig_BOARD_BootClockRUN.frdiv,
|
|
mcgConfig_BOARD_BootClockRUN.dmx32,
|
|
mcgConfig_BOARD_BootClockRUN.drs,
|
|
CLOCK_CONFIG_FllStableDelay);
|
|
/* Set the clock configuration in SIM module. */
|
|
CLOCK_SetSimConfig(&simConfig_BOARD_BootClockRUN);
|
|
/* Set SystemCoreClock variable. */
|
|
SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
|
|
}
|
|
|