generated from Embedded_Projects/Landzo_K60Z_LwIP
197 lines
8.0 KiB
C
197 lines
8.0 KiB
C
/*
|
|
* Copyright (c) 2015, Freescale Semiconductor, Inc.
|
|
* Copyright 2016-2017 NXP
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
*
|
|
* o Redistributions of source code must retain the above copyright notice, this list
|
|
* of conditions and the following disclaimer.
|
|
*
|
|
* o Redistributions in binary form must reproduce the above copyright notice, this
|
|
* list of conditions and the following disclaimer in the documentation and/or
|
|
* other materials provided with the distribution.
|
|
*
|
|
* o Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived from this
|
|
* software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _BOARD_H_
|
|
#define _BOARD_H_
|
|
|
|
#include "clock_config.h"
|
|
#include "fsl_gpio.h"
|
|
|
|
/*******************************************************************************
|
|
* Definitions
|
|
******************************************************************************/
|
|
/*! @brief The board name */
|
|
#define BOARD_NAME "TWR-K60D100M"
|
|
|
|
/*! @brief The UART to use for debug messages. */
|
|
#define BOARD_USE_UART
|
|
#define BOARD_DEBUG_UART_TYPE DEBUG_CONSOLE_DEVICE_TYPE_UART
|
|
#define BOARD_DEBUG_UART_BASEADDR (uint32_t) UART0
|
|
#define BOARD_DEBUG_UART_CLKSRC kCLOCK_CoreSysClk
|
|
#define BOARD_DEBUG_UART_CLK_FREQ CLOCK_GetCoreSysClkFreq()
|
|
#define BOARD_UART_IRQ UART0_RX_TX_IRQn
|
|
#define BOARD_UART_IRQ_HANDLER UART0_RX_TX_IRQHandler
|
|
|
|
#ifndef BOARD_DEBUG_UART_BAUDRATE
|
|
#define BOARD_DEBUG_UART_BAUDRATE 115200
|
|
#endif /* BOARD_DEBUG_UART_BAUDRATE */
|
|
|
|
/*! @brief The CAN instance used for board */
|
|
#define BOARD_CAN_BASEADDR CAN1
|
|
|
|
/*! @brief The i2c instance used for i2c connection by default */
|
|
#define BOARD_I2C_BASEADDR I2C0
|
|
|
|
/*! @brief The Enet instance used for board */
|
|
#define BOARD_ENET_BASEADDR ENET
|
|
|
|
/*! @brief The FlexBus instance used for board.*/
|
|
#define BOARD_FLEXBUS_BASEADDR FB
|
|
|
|
#define BOARD_TSI_ELECTRODE_CNT 4U
|
|
|
|
/*! @brief Indexes of the TSI channels for on board electrodes */
|
|
#define BOARD_TSI_ELECTRODE_1 5U
|
|
#define BOARD_TSI_ELECTRODE_2 8U
|
|
#define BOARD_TSI_ELECTRODE_3 7U
|
|
#define BOARD_TSI_ELECTRODE_4 9U
|
|
|
|
#define BOARD_TSI_TWRPI_ELECTRODE_0 0U
|
|
#define BOARD_TSI_TWRPI_ELECTRODE_1 6U
|
|
#define BOARD_TSI_TWRPI_ELECTRODE_2 7U
|
|
#define BOARD_TSI_TWRPI_ELECTRODE_3 8U
|
|
#define BOARD_TSI_TWRPI_ELECTRODE_4 13U
|
|
#define BOARD_TSI_TWRPI_ELECTRODE_5 14U
|
|
#define BOARD_TSI_TWRPI_ELECTRODE_6 15U
|
|
#define BOARD_TSI_TWRPI_ELECTRODE_7 5U
|
|
#define BOARD_TSI_TWRPI_ELECTRODE_8 9U
|
|
#define BOARD_TSI_TWRPI_ELECTRODE_9 10U
|
|
#define BOARD_TSI_TWRPI_ELECTRODE_10 11U
|
|
#define BOARD_TSI_TWRPI_ELECTRODE_11 12U
|
|
|
|
/*! @brief ADC TWRPI ID input channel */
|
|
#define BOARD_ADC_TWRPIID0_CHANNEL 1U
|
|
#define BOARD_ADC_TWRPIID1_CHANNEL 16U
|
|
#define BOARD_ADC_TWRPI 1U
|
|
|
|
/*! @brief The SDHC instance/channel used for board */
|
|
#define BOARD_SDHC_BASEADDR SDHC
|
|
#define BOARD_SDHC_CD_GPIO_IRQ_HANDLER PORTE_IRQHandler
|
|
|
|
/*! @brief The CMP instance/channel used for board. */
|
|
#define BOARD_CMP_BASEADDR CMP0
|
|
#define BOARD_CMP_CHANNEL 0U
|
|
|
|
/*! @brief The i2c instance used for sai demo */
|
|
#define BOARD_SAI_DEMO_I2C_BASEADDR I2C0
|
|
|
|
/*! @brief The rtc instance used for rtc_func */
|
|
#define BOARD_RTC_FUNC_BASEADDR RTC
|
|
|
|
/* Board led color mapping */
|
|
#define LOGIC_LED_ON 0U
|
|
#define LOGIC_LED_OFF 1U
|
|
#define BOARD_LED_ORANGE_GPIO GPIOA
|
|
#define BOARD_LED_ORANGE_GPIO_PORT PORTA
|
|
#define BOARD_LED_ORANGE_GPIO_PIN 11U
|
|
#define BOARD_LED_YELLOW_GPIO GPIOA
|
|
#define BOARD_LED_YELLOW_GPIO_PORT PORTA
|
|
#define BOARD_LED_YELLOW_GPIO_PIN 28U
|
|
#define BOARD_LED_GREEN_GPIO GPIOA
|
|
#define BOARD_LED_GREEN_GPIO_PORT PORTA
|
|
#define BOARD_LED_GREEN_GPIO_PIN 29U
|
|
#define BOARD_LED_BLUE_GPIO GPIOA
|
|
#define BOARD_LED_BLUE_GPIO_PORT PORTA
|
|
#define BOARD_LED_BLUE_GPIO_PIN 10U
|
|
|
|
#define LED_ORANGE_INIT(output) \
|
|
GPIO_WritePinOutput(BOARD_LED_ORANGE_GPIO, BOARD_LED_ORANGE_GPIO_PIN, output);\
|
|
BOARD_LED_ORANGE_GPIO->PDDR |= (1U << BOARD_LED_ORANGE_GPIO_PIN) /*!< Enable target LED_ORANGE */
|
|
#define LED_ORANGE_ON() \
|
|
GPIO_ClearPinsOutput(BOARD_LED_ORANGE_GPIO, 1U << BOARD_LED_ORANGE_GPIO_PIN) /*!< Turn on target LED_ORANGE */
|
|
#define LED_ORANGE_OFF() \
|
|
GPIO_SetPinsOutput(BOARD_LED_ORANGE_GPIO, 1U << BOARD_LED_ORANGE_GPIO_PIN) /*!< Turn off target LED_ORANGE */
|
|
#define LED_ORANGE_TOGGLE() \
|
|
GPIO_TogglePinsOutput(BOARD_LED_ORANGE_GPIO, 1U << BOARD_LED_ORANGE_GPIO_PIN) /*!< Toggle on target LED_ORANGE */
|
|
|
|
#define LED_YELLOW_INIT(output) \
|
|
GPIO_WritePinOutput(BOARD_LED_YELLOW_GPIO, BOARD_LED_YELLOW_GPIO_PIN, output);\
|
|
BOARD_LED_YELLOW_GPIO->PDDR |= (1U << BOARD_LED_YELLOW_GPIO_PIN) /*!< Enable target LED_YELLOW */
|
|
#define LED_YELLOW_ON() \
|
|
GPIO_ClearPinsOutput(BOARD_LED_YELLOW_GPIO, 1U << BOARD_LED_YELLOW_GPIO_PIN) /*!< Turn on target LED_YELLOW */
|
|
#define LED_YELLOW_OFF() \
|
|
GPIO_SetPinsOutput(BOARD_LED_YELLOW_GPIO, 1U << BOARD_LED_YELLOW_GPIO_PIN) /*!< Turn off target LED_YELLOW */
|
|
#define LED_YELLOW_TOGGLE() \
|
|
GPIO_TogglePinsOutput(BOARD_LED_YELLOW_GPIO, 1U << BOARD_LED_YELLOW_GPIO_PIN) /*!< Toggle on target LED_YELLOW */
|
|
|
|
#define LED_GREEN_INIT(output) \
|
|
GPIO_WritePinOutput(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PIN, output);\
|
|
BOARD_LED_GREEN_GPIO->PDDR |= (1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Enable target LED_GREEN */
|
|
#define LED_GREEN_ON() \
|
|
GPIO_ClearPinsOutput(BOARD_LED_GREEN_GPIO, 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn on target LED_GREEN */
|
|
#define LED_GREEN_OFF() \
|
|
GPIO_SetPinsOutput(BOARD_LED_GREEN_GPIO, 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn off target LED_GREEN */
|
|
#define LED_GREEN_TOGGLE() \
|
|
GPIO_TogglePinsOutput(BOARD_LED_GREEN_GPIO, 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Toggle on target LED_GREEN */
|
|
|
|
#define LED_BLUE_INIT(output) \
|
|
GPIO_WritePinOutput(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PIN, output);\
|
|
BOARD_LED_BLUE_GPIO->PDDR |= (1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Enable target LED_BLUE */
|
|
#define LED_BLUE_ON() \
|
|
GPIO_ClearPinsOutput(BOARD_LED_BLUE_GPIO, 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn on target LED_BLUE */
|
|
#define LED_BLUE_OFF() \
|
|
GPIO_SetPinsOutput(BOARD_LED_BLUE_GPIO, 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn off target LED_BLUE */
|
|
#define LED_BLUE_TOGGLE() \
|
|
GPIO_TogglePinsOutput(BOARD_LED_BLUE_GPIO, 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Toggle on target LED_BLUE */
|
|
|
|
/* SDHC base address, clock and card detection pin */
|
|
#define BOARD_SDHC_BASEADDR SDHC
|
|
#define BOARD_SDHC_CLKSRC kCLOCK_Osc0ErClk
|
|
#define BOARD_SDHC_CLK_FREQ CLOCK_GetFreq(kCLOCK_Osc0ErClk)
|
|
#define BOARD_SDHC_IRQ SDHC_IRQn
|
|
#define BOARD_SDHC_CD_GPIO_BASE GPIOE
|
|
#define BOARD_SDHC_CD_GPIO_PIN 28U
|
|
#define BOARD_SDHC_CD_PORT_BASE PORTE
|
|
#define BOARD_SDHC_CD_PORT_IRQ PORTE_IRQn
|
|
#define BOARD_SDHC_CD_PORT_IRQ_HANDLER PORTE_IRQHandler
|
|
|
|
#define BOARD_ACCEL_I2C_BASEADDR I2C0
|
|
|
|
#if defined(__cplusplus)
|
|
extern "C" {
|
|
#endif /* __cplusplus */
|
|
|
|
/*******************************************************************************
|
|
* API
|
|
******************************************************************************/
|
|
|
|
void BOARD_InitDebugConsole(void);
|
|
|
|
void BOARD_EnableRTC(void);
|
|
void BOARD_DisableSYSMPU(void);
|
|
void BOARD_EnableLCD(void);
|
|
void BOARD_EnableEDMA(void);
|
|
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif /* __cplusplus */
|
|
|
|
#endif /* _BOARD_H_ */
|