Initial commit
This commit is contained in:
Embedded_Projects
commit
e55f9f92c9
|
|
@ -0,0 +1,12 @@
|
|||
BasedOnStyle: Google
|
||||
IndentWidth: 4
|
||||
AlignConsecutiveMacros: Consecutive
|
||||
AlignConsecutiveDeclarations: Consecutive
|
||||
AlignConsecutiveAssignments: Consecutive
|
||||
AllowShortFunctionsOnASingleLine: None
|
||||
BreakBeforeBraces: Custom
|
||||
BraceWrapping:
|
||||
AfterEnum: false
|
||||
AfterStruct: false
|
||||
SplitEmptyFunction: false
|
||||
ColumnLimit: 120
|
||||
|
|
@ -0,0 +1,5 @@
|
|||
/cmake-build-*
|
||||
/build
|
||||
/board/*.bak
|
||||
/.vscode
|
||||
|
||||
|
|
@ -0,0 +1,6 @@
|
|||
[submodule "SDK"]
|
||||
path = SDK
|
||||
url = https://git.minori.work/Embedded_SDK/MCUXpresso_MCXA153.git
|
||||
[submodule "lib/threadx"]
|
||||
path = lib/threadx
|
||||
url = https://github.com/eclipse-threadx/threadx.git
|
||||
|
|
@ -0,0 +1,172 @@
|
|||
cmake_minimum_required(VERSION 3.10)
|
||||
|
||||
project(mcxa153_threadx)
|
||||
|
||||
enable_language(CXX)
|
||||
enable_language(ASM)
|
||||
|
||||
# Different linker scripts
|
||||
set(TARGET_LDSCRIPT_FLASH "${CMAKE_SOURCE_DIR}/SDK/devices/MCXA153/gcc/MCXA153_flash.ld")
|
||||
set(TARGET_LDSCRIPT_RAM "${CMAKE_SOURCE_DIR}/SDK/devices/MCXA153/gcc/MCXA153_ram.ld")
|
||||
|
||||
set(TARGET_SOURCES
|
||||
"SDK/components/serial_manager/fsl_component_serial_manager.c"
|
||||
"SDK/components/serial_manager/fsl_component_serial_port_uart.c"
|
||||
"SDK/components/uart/fsl_adapter_lpuart.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_aoi.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_cdog.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_clock.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_cmc.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_common.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_common_arm.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_crc.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_ctimer.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_edma.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_edma_soc.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_eim.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_eqdc.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_erm.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_freqme.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_glikey.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_gpio.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_i3c.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_i3c_edma.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_inputmux.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_lpadc.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_lpcmp.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_lpi2c.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_lpi2c_edma.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_lpspi.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_lpspi_edma.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_lptmr.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_lpuart.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_lpuart_edma.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_ostimer.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_pwm.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_reset.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_spc.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_utick.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_vbat.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_waketimer.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_wuu.c"
|
||||
"SDK/devices/MCXA153/drivers/fsl_wwdt.c"
|
||||
"SDK/devices/MCXA153/gcc/startup_MCXA153.S"
|
||||
"SDK/devices/MCXA153/system_MCXA153.c"
|
||||
"SDK/devices/MCXA153/utilities/debug_console/fsl_debug_console.c"
|
||||
"SDK/devices/MCXA153/utilities/fsl_sbrk.c"
|
||||
"SDK/devices/MCXA153/utilities/str/fsl_str.c"
|
||||
"board/board.c"
|
||||
"board/clock_config.c"
|
||||
"board/peripherals.c"
|
||||
"board/pin_mux.c"
|
||||
"src/app_init.c"
|
||||
"src/main.c"
|
||||
)
|
||||
|
||||
set(TARGET_C_DEFINES
|
||||
"CPU_MCXA153VLH"
|
||||
"MCUXPRESSO_SDK"
|
||||
"SERIAL_PORT_TYPE_UART=1"
|
||||
"SDK_DEBUGCONSOLE_UART=1"
|
||||
"__STARTUP_CLEAR_BSS"
|
||||
)
|
||||
|
||||
set(TARGET_C_INCLUDES
|
||||
"SDK/CMSIS/Core/Include"
|
||||
"SDK/components/serial_manager"
|
||||
"SDK/components/uart"
|
||||
"SDK/devices/MCXA153"
|
||||
"SDK/devices/MCXA153/drivers"
|
||||
"SDK/devices/MCXA153/utilities/debug_console"
|
||||
"SDK/devices/MCXA153/utilities/str"
|
||||
"board"
|
||||
"include"
|
||||
)
|
||||
|
||||
# Shared libraries linked with application
|
||||
set(TARGET_LIBS
|
||||
"threadx"
|
||||
"c"
|
||||
"m"
|
||||
"nosys"
|
||||
)
|
||||
|
||||
# Shared library and linker script search paths
|
||||
set(TARGET_LIB_DIRECTORIES
|
||||
)
|
||||
|
||||
# Conditional flags
|
||||
# DEBUG
|
||||
set(CMAKE_C_FLAGS_DEBUG "-DDEBUG -O0 -g")
|
||||
set(CMAKE_CXX_FLAGS_DEBUG "-DDEBUG -O0 -g")
|
||||
set(CMAKE_ASM_FLAGS_DEBUG "-DDEBUG -O0 -g")
|
||||
|
||||
# RELEASE
|
||||
set(CMAKE_C_FLAGS_RELEASE "-DNDEBUG -O2")
|
||||
set(CMAKE_CXX_FLAGS_RELEASE "-DNDEBUG -O2")
|
||||
set(CMAKE_ASM_FLAGS_RELEASE "-DNDEBUG -O2")
|
||||
set(CMAKE_EXE_LINKER_FLAGS_RELEASE "")
|
||||
|
||||
# Final compiler flags
|
||||
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wall -fno-common -fno-builtin -ffreestanding -fdata-sections -ffunction-sections")
|
||||
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall -fno-common -fno-builtin -ffreestanding -fdata-sections -ffunction-sections")
|
||||
set(CMAKE_ASM_FLAGS "${CMAKE_C_FLAGS} -x assembler-with-cpp")
|
||||
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -Wl,--gc-sections")
|
||||
|
||||
set(THREADX_ARCH "cortex_m33" CACHE STRING "")
|
||||
set(THREADX_TOOLCHAIN "gnu" CACHE STRING "")
|
||||
set(TX_USER_FILE "${CMAKE_CURRENT_SOURCE_DIR}/include/tx_user.h" CACHE STRING "")
|
||||
add_subdirectory(lib/threadx)
|
||||
|
||||
# Shared sources, includes and definitions
|
||||
add_compile_definitions(${TARGET_C_DEFINES})
|
||||
include_directories(${TARGET_C_INCLUDES})
|
||||
link_directories(${TARGET_LIB_DIRECTORIES})
|
||||
link_libraries(${TARGET_LIBS})
|
||||
|
||||
# Main targets are added here
|
||||
|
||||
# Create ELF
|
||||
add_executable("${CMAKE_PROJECT_NAME}_FLASH.elf" ${TARGET_SOURCES})
|
||||
target_compile_definitions("${CMAKE_PROJECT_NAME}_FLASH.elf"
|
||||
PRIVATE ${TARGET_C_DEFINES_XIP}
|
||||
)
|
||||
target_link_options("${CMAKE_PROJECT_NAME}_FLASH.elf"
|
||||
PRIVATE "-T${TARGET_LDSCRIPT_FLASH}"
|
||||
PRIVATE "-Wl,--Map=${CMAKE_PROJECT_NAME}_FLASH.map"
|
||||
)
|
||||
set_property(TARGET "${CMAKE_PROJECT_NAME}_FLASH.elf" APPEND
|
||||
PROPERTY ADDITIONAL_CLEAN_FILES "${CMAKE_PROJECT_NAME}_FLASH.map"
|
||||
)
|
||||
add_custom_command(OUTPUT "${CMAKE_PROJECT_NAME}_FLASH.hex"
|
||||
COMMAND ${CMAKE_OBJCOPY} "-O" "ihex" "${CMAKE_PROJECT_NAME}_FLASH.elf" "${CMAKE_PROJECT_NAME}_FLASH.hex"
|
||||
DEPENDS "${CMAKE_PROJECT_NAME}_FLASH.elf"
|
||||
)
|
||||
add_custom_target("${CMAKE_PROJECT_NAME}_FLASH_HEX" DEPENDS "${CMAKE_PROJECT_NAME}_FLASH.hex")
|
||||
if(DEFINED TARGET_TOOLCHAIN_SIZE)
|
||||
add_custom_command(TARGET "${CMAKE_PROJECT_NAME}_FLASH.elf" POST_BUILD
|
||||
COMMAND ${TARGET_TOOLCHAIN_SIZE} "${CMAKE_PROJECT_NAME}_FLASH.elf"
|
||||
)
|
||||
endif()
|
||||
|
||||
|
||||
# Create ELF
|
||||
add_executable("${CMAKE_PROJECT_NAME}_RAM.elf" ${TARGET_SOURCES})
|
||||
target_link_options("${CMAKE_PROJECT_NAME}_RAM.elf"
|
||||
PRIVATE "-T${TARGET_LDSCRIPT_RAM}"
|
||||
PRIVATE "-Wl,--Map=${CMAKE_PROJECT_NAME}_RAM.map"
|
||||
)
|
||||
set_property(TARGET "${CMAKE_PROJECT_NAME}_RAM.elf" APPEND
|
||||
PROPERTY ADDITIONAL_CLEAN_FILES "${CMAKE_PROJECT_NAME}_RAM.map"
|
||||
)
|
||||
add_custom_command(OUTPUT "${CMAKE_PROJECT_NAME}_RAM.hex"
|
||||
COMMAND ${CMAKE_OBJCOPY} "-O" "ihex" "${CMAKE_PROJECT_NAME}_RAM.elf" "${CMAKE_PROJECT_NAME}_RAM.hex"
|
||||
DEPENDS "${CMAKE_PROJECT_NAME}_RAM.elf"
|
||||
)
|
||||
add_custom_target("${CMAKE_PROJECT_NAME}_RAM_HEX" DEPENDS "${CMAKE_PROJECT_NAME}_RAM.hex")
|
||||
if(DEFINED TARGET_TOOLCHAIN_SIZE)
|
||||
add_custom_command(TARGET "${CMAKE_PROJECT_NAME}_RAM.elf" POST_BUILD
|
||||
COMMAND ${TARGET_TOOLCHAIN_SIZE} "${CMAKE_PROJECT_NAME}_RAM.elf"
|
||||
)
|
||||
endif()
|
||||
|
||||
|
|
@ -0,0 +1,227 @@
|
|||
<?xml version="1.0" encoding= "UTF-8" ?>
|
||||
<configuration name="MCXA153" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_15 http://mcuxpresso.nxp.com/XSD/mex_configuration_15.xsd" uuid="cdc2abd0-d9d4-4e72-826f-cb0f03c37a4c" version="15" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_15" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
|
||||
<common>
|
||||
<processor>MCXA153</processor>
|
||||
<package>MCXA153VLH</package>
|
||||
<mcu_data>ksdk2_0</mcu_data>
|
||||
<cores selected="cm33_core0">
|
||||
<core name="Cortex-M33" id="cm33_core0" description="M33 core"/>
|
||||
</cores>
|
||||
<description></description>
|
||||
</common>
|
||||
<preferences>
|
||||
<validate_boot_init_only>true</validate_boot_init_only>
|
||||
<generate_extended_information>false</generate_extended_information>
|
||||
<generate_code_modified_registers_only>false</generate_code_modified_registers_only>
|
||||
<update_include_paths>true</update_include_paths>
|
||||
<generate_registers_defines>false</generate_registers_defines>
|
||||
</preferences>
|
||||
<tools>
|
||||
<pins name="Pins" version="15.0" enabled="true" update_project_code="true">
|
||||
<generated_project_files>
|
||||
<file path="board/pin_mux.c" update_enabled="true"/>
|
||||
<file path="board/pin_mux.h" update_enabled="true"/>
|
||||
</generated_project_files>
|
||||
<pins_profile>
|
||||
<processor_version>15.0.0</processor_version>
|
||||
<pin_labels>
|
||||
<pin_label pin_num="38" pin_signal="P3_12/LPUART2_RTS_B/CT1_MAT2/PWM0_X0" label="LED_R" identifier="LED_R"/>
|
||||
</pin_labels>
|
||||
</pins_profile>
|
||||
<functions_list>
|
||||
<function name="BOARD_InitPins">
|
||||
<description>Configures pin routing and optionally pin electrical features.</description>
|
||||
<options>
|
||||
<callFromInitBoot>true</callFromInitBoot>
|
||||
<coreID>cm33_core0</coreID>
|
||||
<enableClock>true</enableClock>
|
||||
</options>
|
||||
<dependencies>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<pins/>
|
||||
</function>
|
||||
<function name="BOARD_InitLEDPins">
|
||||
<description>Configures pin routing and optionally pin electrical features.</description>
|
||||
<options>
|
||||
<callFromInitBoot>true</callFromInitBoot>
|
||||
<coreID>cm33_core0</coreID>
|
||||
<enableClock>true</enableClock>
|
||||
</options>
|
||||
<dependencies>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.port" description="Pins initialization requires the PORT Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.gpio" description="Pins initialization requires the GPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<pins>
|
||||
<pin peripheral="GPIO3" signal="GPIO, 12" pin_num="38" pin_signal="P3_12/LPUART2_RTS_B/CT1_MAT2/PWM0_X0">
|
||||
<pin_features>
|
||||
<pin_feature name="direction" value="OUTPUT"/>
|
||||
<pin_feature name="gpio_init_state" value="true"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
</pins>
|
||||
</function>
|
||||
<function name="BOARD_InitDbgUARTPins">
|
||||
<description>Configures pin routing and optionally pin electrical features.</description>
|
||||
<options>
|
||||
<callFromInitBoot>true</callFromInitBoot>
|
||||
<coreID>cm33_core0</coreID>
|
||||
<enableClock>true</enableClock>
|
||||
</options>
|
||||
<dependencies>
|
||||
<dependency resourceType="Peripheral" resourceId="LPUART0" description="Peripheral LPUART0 signals are routed in the Pins Tool, but the peripheral is not initialized in the Peripherals Tool." problem_level="1" source="Pins:BOARD_InitDbgUARTPins">
|
||||
<feature name="initialized" evaluation="equal">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDbgUARTPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.port" description="Pins initialization requires the PORT Driver in the project." problem_level="2" source="Pins:BOARD_InitDbgUARTPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<pins>
|
||||
<pin peripheral="LPUART0" signal="RX" pin_num="51" pin_signal="P0_2/TDO/SWO/LPUART0_RXD/LPSPI0_SCK/CT0_MAT0/UTICK_CAP0/I3C0_PUR"/>
|
||||
<pin peripheral="LPUART0" signal="TX" pin_num="52" pin_signal="P0_3/TDI/LPUART0_TXD/LPSPI0_SDO/CT0_MAT1/UTICK_CAP1/CMP0_OUT/CMP1_IN1"/>
|
||||
</pins>
|
||||
</function>
|
||||
</functions_list>
|
||||
</pins>
|
||||
<clocks name="Clocks" version="13.0" enabled="true" update_project_code="true">
|
||||
<generated_project_files>
|
||||
<file path="board/clock_config.c" update_enabled="true"/>
|
||||
<file path="board/clock_config.h" update_enabled="true"/>
|
||||
</generated_project_files>
|
||||
<clocks_profile>
|
||||
<processor_version>15.0.0</processor_version>
|
||||
</clocks_profile>
|
||||
<clock_configurations>
|
||||
<clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
|
||||
<description></description>
|
||||
<options/>
|
||||
<dependencies>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.mcx_spc" description="Clocks initialization requires the MCX_SPC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
|
||||
<feature name="enabled" evaluation="equal" configuration="cm33_core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<clock_sources/>
|
||||
<clock_outputs>
|
||||
<clock_output id="CLK_1M_clock.outFreq" value="1 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="CLK_48M_clock.outFreq" value="48 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="CPU_clock.outFreq" value="48 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="FREQME_reference_clock.outFreq" value="12 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="FREQME_target_clock.outFreq" value="12 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="FRO_12M_clock.outFreq" value="12 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="FRO_HF_DIV_clock.outFreq" value="48 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="FRO_HF_clock.outFreq" value="48 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="MAIN_clock.outFreq" value="48 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="OSTIMER_clock.outFreq" value="1 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="Slow_clock.outFreq" value="12 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="System_clock.outFreq" value="48 MHz" locked="false" accuracy=""/>
|
||||
<clock_output id="UTICK_clock.outFreq" value="1 MHz" locked="false" accuracy=""/>
|
||||
</clock_outputs>
|
||||
<clock_settings/>
|
||||
<called_from_default_init>true</called_from_default_init>
|
||||
</clock_configuration>
|
||||
</clock_configurations>
|
||||
</clocks>
|
||||
<dcdx name="DCDx" version="3.0" enabled="false" update_project_code="true">
|
||||
<generated_project_files/>
|
||||
<dcdx_profile>
|
||||
<processor_version>N/A</processor_version>
|
||||
</dcdx_profile>
|
||||
<dcdx_configurations/>
|
||||
</dcdx>
|
||||
<periphs name="Peripherals" version="14.0" enabled="true" update_project_code="true">
|
||||
<generated_project_files>
|
||||
<file path="board/peripherals.c" update_enabled="true"/>
|
||||
<file path="board/peripherals.h" update_enabled="true"/>
|
||||
</generated_project_files>
|
||||
<peripherals_profile>
|
||||
<processor_version>15.0.0</processor_version>
|
||||
</peripherals_profile>
|
||||
<functional_groups>
|
||||
<functional_group name="BOARD_InitPeripherals" uuid="314ed5fb-d446-4fc2-a5e5-ba80abad2026" called_from_default_init="true" id_prefix="" core="cm33_core0">
|
||||
<description></description>
|
||||
<options/>
|
||||
<dependencies/>
|
||||
<instances>
|
||||
<instance name="NVIC" uuid="2c364cff-3ba8-426b-9225-6dccb15831e0" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
|
||||
<config_set name="nvic">
|
||||
<array name="interrupt_table"/>
|
||||
<array name="interrupts"/>
|
||||
</config_set>
|
||||
</instance>
|
||||
</instances>
|
||||
</functional_group>
|
||||
</functional_groups>
|
||||
<components>
|
||||
<component name="system" uuid="664b2c48-0610-40bc-9dc9-914876c5e4ae" type_id="system_54b53072540eeeb8f8e9343e71f28176">
|
||||
<config_set_global name="global_system_definitions">
|
||||
<setting name="user_definitions" value=""/>
|
||||
<setting name="user_includes" value=""/>
|
||||
<setting name="global_init" value=""/>
|
||||
</config_set_global>
|
||||
</component>
|
||||
<component name="generic_enet" uuid="64079d80-abe4-405b-a3d1-94170b2fe650" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
|
||||
<config_set_global name="global_enet"/>
|
||||
</component>
|
||||
<component name="gpio_adapter_common" uuid="44f3a6be-afd1-4f1b-a2cd-c559599ab614" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
|
||||
<config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
|
||||
</component>
|
||||
<component name="generic_uart" uuid="08a9db8d-4fee-40c9-b57b-58b01ef4a0b7" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
|
||||
<config_set_global name="global_uart"/>
|
||||
</component>
|
||||
<component name="msg" uuid="5ab3fd56-ad3c-423f-9307-2e087ca1910b" type_id="msg_6e2baaf3b97dbeef01c0043275f9a0e7">
|
||||
<config_set_global name="global_messages"/>
|
||||
</component>
|
||||
<component name="uart_cmsis_common" uuid="06c3852e-dfda-466c-b413-959c7d127498" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
|
||||
<config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
|
||||
</component>
|
||||
<component name="generic_can" uuid="f9f6f774-84dc-41ed-b4d1-e20335678f50" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
|
||||
<config_set_global name="global_can"/>
|
||||
</component>
|
||||
</components>
|
||||
</periphs>
|
||||
<tee name="TEE" version="5.0" enabled="false" update_project_code="true">
|
||||
<generated_project_files/>
|
||||
<tee_profile>
|
||||
<processor_version>N/A</processor_version>
|
||||
</tee_profile>
|
||||
</tee>
|
||||
</tools>
|
||||
</configuration>
|
||||
|
|
@ -0,0 +1,17 @@
|
|||
# Poor old Windows...
|
||||
if(WIN32)
|
||||
set(CMAKE_SYSTEM_NAME "Generic")
|
||||
endif()
|
||||
|
||||
set(CMAKE_C_COMPILER arm-none-eabi-gcc)
|
||||
set(CMAKE_CXX_COMPILER arm-none-eabi-g++)
|
||||
|
||||
# Optionally set size binary name, for elf section size reporting.
|
||||
set(TARGET_TOOLCHAIN_SIZE arm-none-eabi-size)
|
||||
|
||||
set(CMAKE_C_FLAGS_INIT "-mcpu=cortex-m33+nodsp -mthumb -mfloat-abi=soft")
|
||||
set(CMAKE_CXX_FLAGS_INIT "-mcpu=cortex-m33+nodsp -mthumb -mfloat-abi=soft")
|
||||
set(CMAKE_EXE_LINKER_FLAGS_INIT "-specs=nano.specs -specs=nosys.specs -Wl,--print-memory-usage -Wl,--no-warn-rwx-segments")
|
||||
|
||||
# Make CMake happy about those compilers
|
||||
set(CMAKE_TRY_COMPILE_TARGET_TYPE "STATIC_LIBRARY")
|
||||
|
|
@ -0,0 +1,33 @@
|
|||
/*
|
||||
* Copyright 2023 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
#include <stdint.h>
|
||||
#include "fsl_common.h"
|
||||
#include "fsl_debug_console.h"
|
||||
#include "pin_mux.h"
|
||||
#include "board.h"
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables
|
||||
******************************************************************************/
|
||||
|
||||
/*******************************************************************************
|
||||
* Code
|
||||
******************************************************************************/
|
||||
|
||||
/* Initialize debug console. */
|
||||
void BOARD_InitDebugConsole(void)
|
||||
{
|
||||
/* attach 12 MHz clock to LPUART0 (debug console) */
|
||||
CLOCK_SetClockDiv(kCLOCK_DivLPUART0, 1u);
|
||||
CLOCK_AttachClk(BOARD_DEBUG_UART_CLK_ATTACH);
|
||||
|
||||
RESET_PeripheralReset(BOARD_DEBUG_UART_RST);
|
||||
|
||||
DbgConsole_Init(BOARD_DEBUG_UART_INSTANCE, BOARD_DEBUG_UART_BAUDRATE, BOARD_DEBUG_UART_TYPE,
|
||||
BOARD_DEBUG_UART_CLK_FREQ);
|
||||
}
|
||||
|
|
@ -0,0 +1,121 @@
|
|||
/*
|
||||
* Copyright 2023 NXP
|
||||
* All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
#ifndef _BOARD_H_
|
||||
#define _BOARD_H_
|
||||
|
||||
#include "clock_config.h"
|
||||
#include "fsl_gpio.h"
|
||||
#include "fsl_common.h"
|
||||
|
||||
/*******************************************************************************
|
||||
* Definitions
|
||||
******************************************************************************/
|
||||
/*! @brief The board name */
|
||||
#define BOARD_NAME "FRDM-MCXA153"
|
||||
/*! @brief The manufacturer name */
|
||||
#define MANUFACTURER_NAME "NXP"
|
||||
|
||||
/*! @brief The UART to use for debug messages. */
|
||||
#define BOARD_DEBUG_UART_TYPE kSerialPort_Uart
|
||||
#define BOARD_DEBUG_UART_CLK_FREQ 12000000U
|
||||
|
||||
#ifndef BOARD_DEBUG_UART_BAUDRATE
|
||||
#define BOARD_DEBUG_UART_BAUDRATE 115200U
|
||||
#endif
|
||||
|
||||
#define BOARD_DEBUG_UART_BASEADDR (uint32_t) LPUART0
|
||||
#define BOARD_DEBUG_UART_INSTANCE 0U
|
||||
#define BOARD_DEBUG_UART_CLK_ATTACH kFRO12M_to_LPUART0
|
||||
#define BOARD_DEBUG_UART_RST kLPUART0_RST_SHIFT_RSTn
|
||||
#define BOARD_DEBUG_UART_CLKSRC kCLOCK_LPUART0
|
||||
#define BOARD_UART_IRQ_HANDLER LPUART0_IRQHandler
|
||||
#define BOARD_UART_IRQ LPUART0_IRQn
|
||||
|
||||
/*! @brief GPIO for LED. */
|
||||
#ifndef BOARD_LED_RED_GPIO
|
||||
#define BOARD_LED_RED_GPIO GPIO3
|
||||
#endif
|
||||
#ifndef BOARD_LED_RED_GPIO_PIN
|
||||
#define BOARD_LED_RED_GPIO_PIN 12U
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_LED_GREEN_GPIO
|
||||
#define BOARD_LED_GREEN_GPIO GPIO3
|
||||
#endif
|
||||
#ifndef BOARD_LED_GREEN_GPIO_PIN
|
||||
#define BOARD_LED_GREEN_GPIO_PIN 13U
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_LED_BLUE_GPIO
|
||||
#define BOARD_LED_BLUE_GPIO GPIO3
|
||||
#endif
|
||||
#ifndef BOARD_LED_BLUE_GPIO_PIN
|
||||
#define BOARD_LED_BLUE_GPIO_PIN 0U
|
||||
#endif
|
||||
|
||||
/*! @brief GPIO for SW. */
|
||||
#ifndef BOARD_SW2_GPIO
|
||||
#define BOARD_SW2_GPIO GPIO3
|
||||
#endif
|
||||
#ifndef BOARD_SW2_GPIO_PIN
|
||||
#define BOARD_SW2_GPIO_PIN 29U
|
||||
#endif
|
||||
#define BOARD_SW2_NAME "SW2"
|
||||
#define BOARD_SW2_IRQ GPIO3_IRQn
|
||||
#define BOARD_SW2_IRQ_HANDLER GPIO3_IRQHandler
|
||||
|
||||
#ifndef BOARD_SW3_GPIO
|
||||
#define BOARD_SW3_GPIO GPIO1
|
||||
#endif
|
||||
#ifndef BOARD_SW3_GPIO_PIN
|
||||
#define BOARD_SW3_GPIO_PIN 7U
|
||||
#endif
|
||||
#define BOARD_SW3_NAME "SW3"
|
||||
#define BOARD_SW3_IRQ GPIO1_IRQn
|
||||
#define BOARD_SW3_IRQ_HANDLER GPIO1_IRQHandler
|
||||
|
||||
/* Board LED color mapping */
|
||||
#define LOGIC_LED_ON 0U
|
||||
#define LOGIC_LED_OFF 1U
|
||||
|
||||
#define LED_RED_INIT(output) \
|
||||
GPIO_PinWrite(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PIN, output); \
|
||||
BOARD_LED_RED_GPIO->PDDR |= (1U << BOARD_LED_RED_GPIO_PIN) /*!< Enable target LED_RED */
|
||||
#define LED_RED_ON() \
|
||||
GPIO_PinWrite(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PIN, LOGIC_LED_ON) /*!< Turn on target LED_RED */
|
||||
#define LED_RED_OFF() \
|
||||
GPIO_PinWrite(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PIN, LOGIC_LED_OFF) /*!< Turn off target LED_RED */
|
||||
#define LED_RED_TOGGLE() \
|
||||
GPIO_PortToggle(BOARD_LED_RED_GPIO, 1U << BOARD_LED_RED_GPIO_PIN) /*!< Toggle on target LED_RED */
|
||||
|
||||
#define LED_GREEN_INIT(output) \
|
||||
GPIO_PinWrite(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PIN, output); \
|
||||
BOARD_LED_GREEN_GPIO->PDDR |= (1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Enable target LED_GREEN */
|
||||
#define LED_GREEN_ON() \
|
||||
GPIO_PinWrite(BOARD_LED_RED_GPIO, BOARD_LED_GREEN_GPIO_PIN, LOGIC_LED_ON) /*!< Turn on target LED_GREEN */
|
||||
#define LED_GREEN_OFF() \
|
||||
GPIO_PinWrite(BOARD_LED_RED_GPIO, BOARD_LED_GREEN_GPIO_PIN, LOGIC_LED_OFF) /*!< Turn off target LED_GREEN */
|
||||
#define LED_GREEN_TOGGLE() \
|
||||
GPIO_PortToggle(BOARD_LED_GREEN_GPIO, 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Toggle on target LED_GREEN */
|
||||
|
||||
#define LED_BLUE_INIT(output) \
|
||||
GPIO_PinWrite(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PIN, output); \
|
||||
BOARD_LED_BLUE_GPIO->PDDR |= (1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Enable target LED_BLUE */
|
||||
#define LED_BLUE_ON() \
|
||||
GPIO_PinWrite(BOARD_LED_RED_GPIO, BOARD_LED_BLUE_GPIO_PIN, LOGIC_LED_ON) /*!< Turn on target LED_BLUE */
|
||||
#define LED_BLUE_OFF() \
|
||||
GPIO_PinWrite(BOARD_LED_RED_GPIO, BOARD_LED_BLUE_GPIO_PIN, LOGIC_LED_OFF) /*!< Turn off target LED_BLUE */
|
||||
#define LED_BLUE_TOGGLE() \
|
||||
GPIO_PortToggle(BOARD_LED_BLUE_GPIO, 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Toggle on target LED_BLUE */
|
||||
|
||||
/*******************************************************************************
|
||||
* API
|
||||
******************************************************************************/
|
||||
void BOARD_InitDebugConsole(void);
|
||||
|
||||
#endif /* _BOARD_H_ */
|
||||
|
|
@ -0,0 +1,140 @@
|
|||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
/*
|
||||
* How to setup clock using clock driver functions:
|
||||
*
|
||||
* 1. Setup clock sources.
|
||||
*
|
||||
* 2. Set up wait states of the flash.
|
||||
*
|
||||
* 3. Set up all dividers.
|
||||
*
|
||||
* 4. Set up all selectors to provide selected clocks.
|
||||
*
|
||||
*/
|
||||
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Clocks v13.0
|
||||
processor: MCXA153
|
||||
package_id: MCXA153VLH
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 15.0.0
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
#include "fsl_clock.h"
|
||||
#include "clock_config.h"
|
||||
#include "fsl_spc.h"
|
||||
|
||||
/*******************************************************************************
|
||||
* Definitions
|
||||
******************************************************************************/
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables
|
||||
******************************************************************************/
|
||||
/* System clock frequency. */
|
||||
extern uint32_t SystemCoreClock;
|
||||
|
||||
/*******************************************************************************
|
||||
************************ BOARD_InitBootClocks function ************************
|
||||
******************************************************************************/
|
||||
void BOARD_InitBootClocks(void)
|
||||
{
|
||||
BOARD_BootClockRUN();
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
********************** Configuration BOARD_BootClockRUN ***********************
|
||||
******************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!Configuration
|
||||
name: BOARD_BootClockRUN
|
||||
called_from_default_init: true
|
||||
outputs:
|
||||
- {id: CLK_1M_clock.outFreq, value: 1 MHz}
|
||||
- {id: CLK_48M_clock.outFreq, value: 48 MHz}
|
||||
- {id: CPU_clock.outFreq, value: 48 MHz}
|
||||
- {id: FREQME_reference_clock.outFreq, value: 12 MHz}
|
||||
- {id: FREQME_target_clock.outFreq, value: 12 MHz}
|
||||
- {id: FRO_12M_clock.outFreq, value: 12 MHz}
|
||||
- {id: FRO_HF_DIV_clock.outFreq, value: 48 MHz}
|
||||
- {id: FRO_HF_clock.outFreq, value: 48 MHz}
|
||||
- {id: MAIN_clock.outFreq, value: 48 MHz}
|
||||
- {id: OSTIMER_clock.outFreq, value: 1 MHz}
|
||||
- {id: Slow_clock.outFreq, value: 12 MHz}
|
||||
- {id: System_clock.outFreq, value: 48 MHz}
|
||||
- {id: UTICK_clock.outFreq, value: 1 MHz}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/*******************************************************************************
|
||||
* Variables for BOARD_BootClockRUN configuration
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Code for BOARD_BootClockRUN configuration
|
||||
******************************************************************************/
|
||||
void BOARD_BootClockRUN(void)
|
||||
{
|
||||
uint32_t coreFreq;
|
||||
spc_active_mode_core_ldo_option_t ldoOption;
|
||||
spc_sram_voltage_config_t sramOption;
|
||||
|
||||
/* Get the CPU Core frequency */
|
||||
coreFreq = CLOCK_GetCoreSysClkFreq();
|
||||
|
||||
/* The flow of increasing voltage and frequency */
|
||||
if (coreFreq <= BOARD_BOOTCLOCKRUN_CORE_CLOCK) {
|
||||
/* Set the LDO_CORE VDD regulator level */
|
||||
ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage;
|
||||
ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength;
|
||||
(void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption);
|
||||
/* Configure Flash to support different voltage level and frequency */
|
||||
FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U));
|
||||
/* Specifies the operating voltage for the SRAM's read/write timing margin */
|
||||
sramOption.operateVoltage = kSPC_sramOperateAt1P0V;
|
||||
sramOption.requestVoltageUpdate = true;
|
||||
(void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption);
|
||||
}
|
||||
|
||||
CLOCK_SetupFROHFClocking(48000000U); /*!< Enable FRO HF(48MHz) output */
|
||||
|
||||
CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */
|
||||
|
||||
CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */
|
||||
|
||||
/* The flow of decreasing voltage and frequency */
|
||||
if (coreFreq > BOARD_BOOTCLOCKRUN_CORE_CLOCK) {
|
||||
/* Configure Flash to support different voltage level and frequency */
|
||||
FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U));
|
||||
/* Specifies the operating voltage for the SRAM's read/write timing margin */
|
||||
sramOption.operateVoltage = kSPC_sramOperateAt1P0V;
|
||||
sramOption.requestVoltageUpdate = true;
|
||||
(void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption);
|
||||
/* Set the LDO_CORE VDD regulator level */
|
||||
ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage;
|
||||
ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength;
|
||||
(void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption);
|
||||
}
|
||||
|
||||
/*!< Set up clock selectors - Attach clocks to the peripheries */
|
||||
CLOCK_AttachClk(kCLK_1M_to_OSTIMER); /* !< Switch OSTIMER to CLK_1M */
|
||||
|
||||
/* Configure FREQME clock */
|
||||
CLOCK_EnableClock(kCLOCK_InputMux);
|
||||
RESET_PeripheralReset(kINPUTMUX0_RST_SHIFT_RSTn);
|
||||
INPUTMUX0->FREQMEAS_REF = INPUTMUX_FREQMEAS_REF_INP(2);
|
||||
INPUTMUX0->FREQMEAS_TAR = INPUTMUX_FREQMEAS_TAR_INP(2);
|
||||
|
||||
/*!< Set up dividers */
|
||||
CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */
|
||||
CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */
|
||||
|
||||
/* Set SystemCoreClock variable */
|
||||
SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
|
||||
}
|
||||
|
|
@ -0,0 +1,60 @@
|
|||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#ifndef _CLOCK_CONFIG_H_
|
||||
#define _CLOCK_CONFIG_H_
|
||||
|
||||
#include "fsl_common.h"
|
||||
|
||||
/*******************************************************************************
|
||||
* Definitions
|
||||
******************************************************************************/
|
||||
|
||||
/*******************************************************************************
|
||||
************************ BOARD_InitBootClocks function ************************
|
||||
******************************************************************************/
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes default configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitBootClocks(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*******************************************************************************
|
||||
********************** Configuration BOARD_BootClockRUN ***********************
|
||||
******************************************************************************/
|
||||
/*******************************************************************************
|
||||
* Definitions for BOARD_BootClockRUN configuration
|
||||
******************************************************************************/
|
||||
#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 48000000U /*!< Core clock frequency: 48000000Hz */
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
* API for BOARD_BootClockRUN configuration
|
||||
******************************************************************************/
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
/*!
|
||||
* @brief This function executes configuration of clocks.
|
||||
*
|
||||
*/
|
||||
void BOARD_BootClockRUN(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif /* __cplusplus*/
|
||||
|
||||
#endif /* _CLOCK_CONFIG_H_ */
|
||||
|
||||
|
|
@ -0,0 +1,94 @@
|
|||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Peripherals v14.0
|
||||
processor: MCXA153
|
||||
package_id: MCXA153VLH
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 15.0.0
|
||||
functionalGroups:
|
||||
- name: BOARD_InitPeripherals
|
||||
UUID: 314ed5fb-d446-4fc2-a5e5-ba80abad2026
|
||||
called_from_default_init: true
|
||||
selectedCore: cm33_core0
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
component:
|
||||
- type: 'system'
|
||||
- type_id: 'system_54b53072540eeeb8f8e9343e71f28176'
|
||||
- global_system_definitions:
|
||||
- user_definitions: ''
|
||||
- user_includes: ''
|
||||
- global_init: ''
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
component:
|
||||
- type: 'gpio_adapter_common'
|
||||
- type_id: 'gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6'
|
||||
- global_gpio_adapter_common:
|
||||
- quick_selection: 'default'
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
component:
|
||||
- type: 'uart_cmsis_common'
|
||||
- type_id: 'uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8'
|
||||
- global_USART_CMSIS_common:
|
||||
- quick_selection: 'default'
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Included files
|
||||
**********************************************************************************************************************/
|
||||
#include "peripherals.h"
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* BOARD_InitPeripherals functional group
|
||||
**********************************************************************************************************************/
|
||||
/***********************************************************************************************************************
|
||||
* NVIC initialization code
|
||||
**********************************************************************************************************************/
|
||||
/* clang-format off */
|
||||
/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
instance:
|
||||
- name: 'NVIC'
|
||||
- type: 'nvic'
|
||||
- mode: 'general'
|
||||
- custom_name_enabled: 'false'
|
||||
- type_id: 'nvic_57b5eef3774cc60acaede6f5b8bddc67'
|
||||
- functional_group: 'BOARD_InitPeripherals'
|
||||
- peripheral: 'NVIC'
|
||||
- config_sets:
|
||||
- nvic:
|
||||
- interrupt_table: []
|
||||
- interrupts: []
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
|
||||
/* clang-format on */
|
||||
|
||||
/* Empty initialization function (commented out)
|
||||
static void NVIC_init(void) {
|
||||
} */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Initialization functions
|
||||
**********************************************************************************************************************/
|
||||
void BOARD_InitPeripherals(void)
|
||||
{
|
||||
/* Initialize components */
|
||||
}
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* BOARD_InitBootPeripherals function
|
||||
**********************************************************************************************************************/
|
||||
void BOARD_InitBootPeripherals(void)
|
||||
{
|
||||
BOARD_InitPeripherals();
|
||||
}
|
||||
|
|
@ -0,0 +1,33 @@
|
|||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#ifndef _PERIPHERALS_H_
|
||||
#define _PERIPHERALS_H_
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Included files
|
||||
**********************************************************************************************************************/
|
||||
#include "fsl_common.h"
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif /* __cplusplus */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Initialization functions
|
||||
**********************************************************************************************************************/
|
||||
|
||||
void BOARD_InitPeripherals(void);
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* BOARD_InitBootPeripherals function
|
||||
**********************************************************************************************************************/
|
||||
void BOARD_InitBootPeripherals(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* _PERIPHERALS_H_ */
|
||||
|
|
@ -0,0 +1,154 @@
|
|||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Pins v15.0
|
||||
processor: MCXA153
|
||||
package_id: MCXA153VLH
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 15.0.0
|
||||
pin_labels:
|
||||
- {pin_num: '38', pin_signal: P3_12/LPUART2_RTS_B/CT1_MAT2/PWM0_X0, label: LED_R, identifier: LED_R}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
#include "fsl_common.h"
|
||||
#include "fsl_port.h"
|
||||
#include "fsl_gpio.h"
|
||||
#include "pin_mux.h"
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitBootPins
|
||||
* Description : Calls initialization functions.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitBootPins(void)
|
||||
{
|
||||
BOARD_InitPins();
|
||||
BOARD_InitLEDPins();
|
||||
BOARD_InitDbgUARTPins();
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list: []
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitPins(void)
|
||||
{
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitLEDPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '38', peripheral: GPIO3, signal: 'GPIO, 12', pin_signal: P3_12/LPUART2_RTS_B/CT1_MAT2/PWM0_X0, direction: OUTPUT, gpio_init_state: 'true'}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitLEDPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitLEDPins(void)
|
||||
{
|
||||
/* Write to GPIO3: Peripheral clock is enabled */
|
||||
CLOCK_EnableClock(kCLOCK_GateGPIO3);
|
||||
/* Write to PORT3: Peripheral clock is enabled */
|
||||
CLOCK_EnableClock(kCLOCK_GatePORT3);
|
||||
/* GPIO3 peripheral is released from reset */
|
||||
RESET_ReleasePeripheralReset(kGPIO3_RST_SHIFT_RSTn);
|
||||
/* PORT3 peripheral is released from reset */
|
||||
RESET_ReleasePeripheralReset(kPORT3_RST_SHIFT_RSTn);
|
||||
|
||||
gpio_pin_config_t LED_R_config = {
|
||||
.pinDirection = kGPIO_DigitalOutput,
|
||||
.outputLogic = 1U
|
||||
};
|
||||
/* Initialize GPIO functionality on pin PIO3_12 (pin 38) */
|
||||
GPIO_PinInit(BOARD_INITLEDPINS_LED_R_GPIO, BOARD_INITLEDPINS_LED_R_PIN, &LED_R_config);
|
||||
|
||||
/* PORT3_12 (pin 38) is configured as P3_12 */
|
||||
PORT_SetPinMux(BOARD_INITLEDPINS_LED_R_PORT, BOARD_INITLEDPINS_LED_R_PIN, kPORT_MuxAlt0);
|
||||
|
||||
PORT3->PCR[12] = ((PORT3->PCR[12] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(PORT_PCR_IBE_MASK)))
|
||||
|
||||
/* Input Buffer Enable: Enables. */
|
||||
| PORT_PCR_IBE(PCR_IBE_ibe1));
|
||||
}
|
||||
|
||||
/* clang-format off */
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitDbgUARTPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: '51', peripheral: LPUART0, signal: RX, pin_signal: P0_2/TDO/SWO/LPUART0_RXD/LPSPI0_SCK/CT0_MAT0/UTICK_CAP0/I3C0_PUR}
|
||||
- {pin_num: '52', peripheral: LPUART0, signal: TX, pin_signal: P0_3/TDI/LPUART0_TXD/LPSPI0_SDO/CT0_MAT1/UTICK_CAP1/CMP0_OUT/CMP1_IN1}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
/* clang-format on */
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitDbgUARTPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitDbgUARTPins(void)
|
||||
{
|
||||
/* Write to PORT0: Peripheral clock is enabled */
|
||||
CLOCK_EnableClock(kCLOCK_GatePORT0);
|
||||
/* LPUART0 peripheral is released from reset */
|
||||
RESET_ReleasePeripheralReset(kLPUART0_RST_SHIFT_RSTn);
|
||||
/* PORT0 peripheral is released from reset */
|
||||
RESET_ReleasePeripheralReset(kPORT0_RST_SHIFT_RSTn);
|
||||
|
||||
/* PORT0_2 (pin 51) is configured as LPUART0_RXD */
|
||||
PORT_SetPinMux(PORT0, 2U, kPORT_MuxAlt2);
|
||||
|
||||
PORT0->PCR[2] = ((PORT0->PCR[2] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(PORT_PCR_IBE_MASK)))
|
||||
|
||||
/* Input Buffer Enable: Enables. */
|
||||
| PORT_PCR_IBE(PCR_IBE_ibe1));
|
||||
|
||||
/* PORT0_3 (pin 52) is configured as LPUART0_TXD */
|
||||
PORT_SetPinMux(PORT0, 3U, kPORT_MuxAlt2);
|
||||
|
||||
PORT0->PCR[3] = ((PORT0->PCR[3] &
|
||||
/* Mask bits to zero which are setting */
|
||||
(~(PORT_PCR_IBE_MASK)))
|
||||
|
||||
/* Input Buffer Enable: Enables. */
|
||||
| PORT_PCR_IBE(PCR_IBE_ibe1));
|
||||
}
|
||||
/***********************************************************************************************************************
|
||||
* EOF
|
||||
**********************************************************************************************************************/
|
||||
|
|
@ -0,0 +1,75 @@
|
|||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#ifndef _PIN_MUX_H_
|
||||
#define _PIN_MUX_H_
|
||||
|
||||
/*!
|
||||
* @addtogroup pin_mux
|
||||
* @{
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* API
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/*!
|
||||
* @brief Calls initialization functions.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitBootPins(void);
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitPins(void);
|
||||
|
||||
#define PCR_IBE_ibe1 0x01u /*!<@brief Input Buffer Enable: Enables */
|
||||
|
||||
/*! @name PORT3_12 (number 38), LED_R
|
||||
@{ */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITLEDPINS_LED_R_GPIO GPIO3 /*!<@brief GPIO peripheral base pointer */
|
||||
#define BOARD_INITLEDPINS_LED_R_GPIO_PIN 12U /*!<@brief GPIO pin number */
|
||||
#define BOARD_INITLEDPINS_LED_R_GPIO_PIN_MASK (1U << 12U) /*!<@brief GPIO pin mask */
|
||||
|
||||
/* Symbols to be used with PORT driver */
|
||||
#define BOARD_INITLEDPINS_LED_R_PORT PORT3 /*!<@brief PORT peripheral base pointer */
|
||||
#define BOARD_INITLEDPINS_LED_R_PIN 12U /*!<@brief PORT pin number */
|
||||
#define BOARD_INITLEDPINS_LED_R_PIN_MASK (1U << 12U) /*!<@brief PORT pin mask */
|
||||
/* @} */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitLEDPins(void);
|
||||
|
||||
#define PCR_IBE_ibe1 0x01u /*!<@brief Input Buffer Enable: Enables */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitDbgUARTPins(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
/*!
|
||||
* @}
|
||||
*/
|
||||
#endif /* _PIN_MUX_H_ */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* EOF
|
||||
**********************************************************************************************************************/
|
||||
|
|
@ -0,0 +1,9 @@
|
|||
#ifndef APP_INIT_H
|
||||
#define APP_INIT_H
|
||||
|
||||
#include "tx_api.h"
|
||||
|
||||
extern TX_THREAD app_init_thread_id;
|
||||
void app_init_thread(ULONG thread_input);
|
||||
|
||||
#endif // APP_INIT_H
|
||||
|
|
@ -0,0 +1,319 @@
|
|||
/**************************************************************************/
|
||||
/***************************************************************************
|
||||
* Copyright (c) 2024 Microsoft Corporation
|
||||
*
|
||||
* This program and the accompanying materials are made available under the
|
||||
* terms of the MIT License which is available at
|
||||
* https://opensource.org/licenses/MIT.
|
||||
*
|
||||
* SPDX-License-Identifier: MIT
|
||||
**************************************************************************/
|
||||
|
||||
|
||||
/**************************************************************************/
|
||||
/**************************************************************************/
|
||||
/** */
|
||||
/** ThreadX Component */
|
||||
/** */
|
||||
/** User Specific */
|
||||
/** */
|
||||
/**************************************************************************/
|
||||
/**************************************************************************/
|
||||
|
||||
|
||||
/**************************************************************************/
|
||||
/* */
|
||||
/* PORT SPECIFIC C INFORMATION RELEASE */
|
||||
/* */
|
||||
/* tx_user.h PORTABLE C */
|
||||
/* 6.3.0 */
|
||||
/* */
|
||||
/* AUTHOR */
|
||||
/* */
|
||||
/* William E. Lamie, Microsoft Corporation */
|
||||
/* */
|
||||
/* DESCRIPTION */
|
||||
/* */
|
||||
/* This file contains user defines for configuring ThreadX in specific */
|
||||
/* ways. This file will have an effect only if the application and */
|
||||
/* ThreadX library are built with TX_INCLUDE_USER_DEFINE_FILE defined. */
|
||||
/* Note that all the defines in this file may also be made on the */
|
||||
/* command line when building ThreadX library and application objects. */
|
||||
/* */
|
||||
/* RELEASE HISTORY */
|
||||
/* */
|
||||
/* DATE NAME DESCRIPTION */
|
||||
/* */
|
||||
/* 05-19-2020 William E. Lamie Initial Version 6.0 */
|
||||
/* 09-30-2020 Yuxin Zhou Modified comment(s), */
|
||||
/* resulting in version 6.1 */
|
||||
/* 03-02-2021 Scott Larson Modified comment(s), */
|
||||
/* added option to remove */
|
||||
/* FileX pointer, */
|
||||
/* resulting in version 6.1.5 */
|
||||
/* 06-02-2021 Scott Larson Added options for multiple */
|
||||
/* block pool search & delay, */
|
||||
/* resulting in version 6.1.7 */
|
||||
/* 10-15-2021 Yuxin Zhou Modified comment(s), added */
|
||||
/* user-configurable symbol */
|
||||
/* TX_TIMER_TICKS_PER_SECOND */
|
||||
/* resulting in version 6.1.9 */
|
||||
/* 04-25-2022 Wenhui Xie Modified comment(s), */
|
||||
/* optimized the definition of */
|
||||
/* TX_TIMER_TICKS_PER_SECOND, */
|
||||
/* resulting in version 6.1.11 */
|
||||
/* 10-31-2023 Xiuwen Cai Modified comment(s), */
|
||||
/* added option for random */
|
||||
/* number stack filling, */
|
||||
/* resulting in version 6.3.0 */
|
||||
/* */
|
||||
/**************************************************************************/
|
||||
|
||||
#ifndef TX_USER_H
|
||||
#define TX_USER_H
|
||||
|
||||
|
||||
/* Define various build options for the ThreadX port. The application should either make changes
|
||||
here by commenting or un-commenting the conditional compilation defined OR supply the defines
|
||||
though the compiler's equivalent of the -D option.
|
||||
|
||||
For maximum speed, the following should be defined:
|
||||
|
||||
TX_MAX_PRIORITIES 32
|
||||
TX_DISABLE_PREEMPTION_THRESHOLD
|
||||
TX_DISABLE_REDUNDANT_CLEARING
|
||||
TX_DISABLE_NOTIFY_CALLBACKS
|
||||
TX_NOT_INTERRUPTABLE
|
||||
TX_TIMER_PROCESS_IN_ISR
|
||||
TX_REACTIVATE_INLINE
|
||||
TX_DISABLE_STACK_FILLING
|
||||
TX_INLINE_THREAD_RESUME_SUSPEND
|
||||
|
||||
For minimum size, the following should be defined:
|
||||
|
||||
TX_MAX_PRIORITIES 32
|
||||
TX_DISABLE_PREEMPTION_THRESHOLD
|
||||
TX_DISABLE_REDUNDANT_CLEARING
|
||||
TX_DISABLE_NOTIFY_CALLBACKS
|
||||
TX_NO_FILEX_POINTER
|
||||
TX_NOT_INTERRUPTABLE
|
||||
TX_TIMER_PROCESS_IN_ISR
|
||||
|
||||
Of course, many of these defines reduce functionality and/or change the behavior of the
|
||||
system in ways that may not be worth the trade-off. For example, the TX_TIMER_PROCESS_IN_ISR
|
||||
results in faster and smaller code, however, it increases the amount of processing in the ISR.
|
||||
In addition, some services that are available in timers are not available from ISRs and will
|
||||
therefore return an error if this option is used. This may or may not be desirable for a
|
||||
given application. */
|
||||
|
||||
|
||||
/* Override various options with default values already assigned in tx_port.h. Please also refer
|
||||
to tx_port.h for descriptions on each of these options. */
|
||||
|
||||
/*
|
||||
#define TX_MAX_PRIORITIES 32
|
||||
#define TX_MINIMUM_STACK ????
|
||||
#define TX_THREAD_USER_EXTENSION ????
|
||||
#define TX_TIMER_THREAD_STACK_SIZE ????
|
||||
#define TX_TIMER_THREAD_PRIORITY ????
|
||||
*/
|
||||
|
||||
/* Define the common timer tick reference for use by other middleware components. The default
|
||||
value is 10ms (i.e. 100 ticks, defined in tx_api.h), but may be replaced by a port-specific
|
||||
version in tx_port.h or here.
|
||||
Note: the actual hardware timer value may need to be changed (usually in tx_initialize_low_level). */
|
||||
|
||||
|
||||
#define TX_TIMER_TICKS_PER_SECOND (1000UL)
|
||||
|
||||
|
||||
/* Determine if there is a FileX pointer in the thread control block.
|
||||
By default, the pointer is there for legacy/backwards compatibility.
|
||||
The pointer must also be there for applications using FileX.
|
||||
Define this to save space in the thread control block.
|
||||
*/
|
||||
|
||||
/*
|
||||
#define TX_NO_FILEX_POINTER
|
||||
*/
|
||||
|
||||
/* Determine if timer expirations (application timers, timeouts, and tx_thread_sleep calls
|
||||
should be processed within the a system timer thread or directly in the timer ISR.
|
||||
By default, the timer thread is used. When the following is defined, the timer expiration
|
||||
processing is done directly from the timer ISR, thereby eliminating the timer thread control
|
||||
block, stack, and context switching to activate it. */
|
||||
|
||||
/*
|
||||
#define TX_TIMER_PROCESS_IN_ISR
|
||||
*/
|
||||
|
||||
/* Determine if in-line timer reactivation should be used within the timer expiration processing.
|
||||
By default, this is disabled and a function call is used. When the following is defined,
|
||||
reactivating is performed in-line resulting in faster timer processing but slightly larger
|
||||
code size. */
|
||||
|
||||
/*
|
||||
#define TX_REACTIVATE_INLINE
|
||||
*/
|
||||
|
||||
/* Determine is stack filling is enabled. By default, ThreadX stack filling is enabled,
|
||||
which places an 0xEF pattern in each byte of each thread's stack. This is used by
|
||||
debuggers with ThreadX-awareness and by the ThreadX run-time stack checking feature. */
|
||||
|
||||
/*
|
||||
#define TX_DISABLE_STACK_FILLING
|
||||
*/
|
||||
|
||||
/* Determine whether or not stack checking is enabled. By default, ThreadX stack checking is
|
||||
disabled. When the following is defined, ThreadX thread stack checking is enabled. If stack
|
||||
checking is enabled (TX_ENABLE_STACK_CHECKING is defined), the TX_DISABLE_STACK_FILLING
|
||||
define is negated, thereby forcing the stack fill which is necessary for the stack checking
|
||||
logic. */
|
||||
|
||||
/*
|
||||
#define TX_ENABLE_STACK_CHECKING
|
||||
*/
|
||||
|
||||
/* Determine if random number is used for stack filling. By default, ThreadX uses a fixed
|
||||
pattern for stack filling. When the following is defined, ThreadX uses a random number
|
||||
for stack filling. This is effective only when TX_ENABLE_STACK_CHECKING is defined. */
|
||||
|
||||
/*
|
||||
#define TX_ENABLE_RANDOM_NUMBER_STACK_FILLING
|
||||
*/
|
||||
|
||||
/* Determine if preemption-threshold should be disabled. By default, preemption-threshold is
|
||||
enabled. If the application does not use preemption-threshold, it may be disabled to reduce
|
||||
code size and improve performance. */
|
||||
|
||||
/*
|
||||
#define TX_DISABLE_PREEMPTION_THRESHOLD
|
||||
*/
|
||||
|
||||
/* Determine if global ThreadX variables should be cleared. If the compiler startup code clears
|
||||
the .bss section prior to ThreadX running, the define can be used to eliminate unnecessary
|
||||
clearing of ThreadX global variables. */
|
||||
|
||||
/*
|
||||
#define TX_DISABLE_REDUNDANT_CLEARING
|
||||
*/
|
||||
|
||||
/* Determine if no timer processing is required. This option will help eliminate the timer
|
||||
processing when not needed. The user will also have to comment out the call to
|
||||
tx_timer_interrupt, which is typically made from assembly language in
|
||||
tx_initialize_low_level. Note: if TX_NO_TIMER is used, the define TX_TIMER_PROCESS_IN_ISR
|
||||
must also be used and tx_timer_initialize must be removed from ThreadX library. */
|
||||
|
||||
/*
|
||||
#define TX_NO_TIMER
|
||||
#ifndef TX_TIMER_PROCESS_IN_ISR
|
||||
#define TX_TIMER_PROCESS_IN_ISR
|
||||
#endif
|
||||
*/
|
||||
|
||||
/* Determine if the notify callback option should be disabled. By default, notify callbacks are
|
||||
enabled. If the application does not use notify callbacks, they may be disabled to reduce
|
||||
code size and improve performance. */
|
||||
|
||||
/*
|
||||
#define TX_DISABLE_NOTIFY_CALLBACKS
|
||||
*/
|
||||
|
||||
|
||||
/* Determine if the tx_thread_resume and tx_thread_suspend services should have their internal
|
||||
code in-line. This results in a larger image, but improves the performance of the thread
|
||||
resume and suspend services. */
|
||||
|
||||
/*
|
||||
#define TX_INLINE_THREAD_RESUME_SUSPEND
|
||||
*/
|
||||
|
||||
|
||||
/* Determine if the internal ThreadX code is non-interruptable. This results in smaller code
|
||||
size and less processing overhead, but increases the interrupt lockout time. */
|
||||
|
||||
/*
|
||||
#define TX_NOT_INTERRUPTABLE
|
||||
*/
|
||||
|
||||
|
||||
/* Determine if the trace event logging code should be enabled. This causes slight increases in
|
||||
code size and overhead, but provides the ability to generate system trace information which
|
||||
is available for viewing in TraceX. */
|
||||
|
||||
/*
|
||||
#define TX_ENABLE_EVENT_TRACE
|
||||
*/
|
||||
|
||||
|
||||
/* Determine if block pool performance gathering is required by the application. When the following is
|
||||
defined, ThreadX gathers various block pool performance information. */
|
||||
|
||||
/*
|
||||
#define TX_BLOCK_POOL_ENABLE_PERFORMANCE_INFO
|
||||
*/
|
||||
|
||||
/* Determine if byte pool performance gathering is required by the application. When the following is
|
||||
defined, ThreadX gathers various byte pool performance information. */
|
||||
|
||||
/*
|
||||
#define TX_BYTE_POOL_ENABLE_PERFORMANCE_INFO
|
||||
*/
|
||||
|
||||
/* Determine if event flags performance gathering is required by the application. When the following is
|
||||
defined, ThreadX gathers various event flags performance information. */
|
||||
|
||||
/*
|
||||
#define TX_EVENT_FLAGS_ENABLE_PERFORMANCE_INFO
|
||||
*/
|
||||
|
||||
/* Determine if mutex performance gathering is required by the application. When the following is
|
||||
defined, ThreadX gathers various mutex performance information. */
|
||||
|
||||
/*
|
||||
#define TX_MUTEX_ENABLE_PERFORMANCE_INFO
|
||||
*/
|
||||
|
||||
/* Determine if queue performance gathering is required by the application. When the following is
|
||||
defined, ThreadX gathers various queue performance information. */
|
||||
|
||||
/*
|
||||
#define TX_QUEUE_ENABLE_PERFORMANCE_INFO
|
||||
*/
|
||||
|
||||
/* Determine if semaphore performance gathering is required by the application. When the following is
|
||||
defined, ThreadX gathers various semaphore performance information. */
|
||||
|
||||
/*
|
||||
#define TX_SEMAPHORE_ENABLE_PERFORMANCE_INFO
|
||||
*/
|
||||
|
||||
/* Determine if thread performance gathering is required by the application. When the following is
|
||||
defined, ThreadX gathers various thread performance information. */
|
||||
|
||||
/*
|
||||
#define TX_THREAD_ENABLE_PERFORMANCE_INFO
|
||||
*/
|
||||
|
||||
/* Determine if timer performance gathering is required by the application. When the following is
|
||||
defined, ThreadX gathers various timer performance information. */
|
||||
|
||||
/*
|
||||
#define TX_TIMER_ENABLE_PERFORMANCE_INFO
|
||||
*/
|
||||
|
||||
/* Override options for byte pool searches of multiple blocks. */
|
||||
|
||||
/*
|
||||
#define TX_BYTE_POOL_MULTIPLE_BLOCK_SEARCH 20
|
||||
*/
|
||||
|
||||
/* Override options for byte pool search delay to avoid thrashing. */
|
||||
|
||||
/*
|
||||
#define TX_BYTE_POOL_DELAY_VALUE 3
|
||||
*/
|
||||
|
||||
#define TX_SINGLE_MODE_NON_SECURE (1)
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,16 @@
|
|||
/* Board */
|
||||
#include "pin_mux.h"
|
||||
|
||||
/* SDK drivers */
|
||||
#include "fsl_gpio.h"
|
||||
|
||||
/* App */
|
||||
#include "app_init.h"
|
||||
|
||||
TX_THREAD app_init_thread_id;
|
||||
void app_init_thread(ULONG thread_input) {
|
||||
for (;;) {
|
||||
GPIO_PortToggle(BOARD_INITLEDPINS_LED_R_GPIO, BOARD_INITLEDPINS_LED_R_PIN_MASK);
|
||||
tx_thread_sleep(1000);
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,56 @@
|
|||
/* Board */
|
||||
#include "board.h"
|
||||
#include "clock_config.h"
|
||||
#include "peripherals.h"
|
||||
#include "pin_mux.h"
|
||||
|
||||
/* ThreadX */
|
||||
#include "tx_api.h"
|
||||
|
||||
/* App */
|
||||
#include "app_init.h"
|
||||
|
||||
extern void *__HeapLimit;
|
||||
extern void *_tx_initialize_unused_memory;
|
||||
|
||||
extern void _tx_timer_interrupt(void);
|
||||
|
||||
void tx_application_define(void *first_unused_memory) {
|
||||
tx_thread_create(&app_init_thread_id, "INIT", app_init_thread, 0, first_unused_memory, 1024, 3, 3, TX_NO_TIME_SLICE,
|
||||
TX_AUTO_START);
|
||||
}
|
||||
|
||||
void _tx_initialize_low_level(void) {
|
||||
const uint32_t primask = DisableGlobalIRQ();
|
||||
|
||||
_tx_initialize_unused_memory = (void *)&__HeapLimit;
|
||||
|
||||
DWT->CTRL |= DWT_CTRL_CYCCNTENA_Msk;
|
||||
|
||||
SysTick_Config(CLOCK_GetCoreSysClkFreq() / TX_TIMER_TICKS_PER_SECOND);
|
||||
|
||||
NVIC_SetPriority(SVCall_IRQn, 7);
|
||||
NVIC_SetPriority(PendSV_IRQn, 7);
|
||||
|
||||
NVIC_SetPriority(SysTick_IRQn, 6);
|
||||
|
||||
EnableGlobalIRQ(primask);
|
||||
}
|
||||
|
||||
void SysTick_Handler(void) {
|
||||
_tx_timer_interrupt();
|
||||
}
|
||||
|
||||
int main(void) {
|
||||
BOARD_InitBootPins();
|
||||
BOARD_InitBootClocks();
|
||||
BOARD_InitBootPeripherals();
|
||||
|
||||
BOARD_InitDebugConsole();
|
||||
|
||||
tx_kernel_enter();
|
||||
|
||||
for (;;) {
|
||||
__WFI();
|
||||
}
|
||||
}
|
||||
Loading…
Reference in New Issue