/***********************************************************************************************************************
 * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
 * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
 **********************************************************************************************************************/

/* clang-format off */
/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!GlobalInfo
product: Pins v15.0
processor: MCXA153
package_id: MCXA153VLH
mcu_data: ksdk2_0
processor_version: 15.0.0
pin_labels:
- {pin_num: '38', pin_signal: P3_12/LPUART2_RTS_B/CT1_MAT2/PWM0_X0, label: LED_R, identifier: LED_R}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */
/* clang-format on */

#include "fsl_common.h"
#include "fsl_port.h"
#include "fsl_gpio.h"
#include "pin_mux.h"

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitBootPins
 * Description   : Calls initialization functions.
 *
 * END ****************************************************************************************************************/
void BOARD_InitBootPins(void)
{
    BOARD_InitPins();
    BOARD_InitLEDPins();
    BOARD_InitDbgUARTPins();
}

/* clang-format off */
/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitPins:
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
- pin_list: []
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */
/* clang-format on */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitPins(void)
{
}

/* clang-format off */
/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitLEDPins:
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
- pin_list:
  - {pin_num: '38', peripheral: GPIO3, signal: 'GPIO, 12', pin_signal: P3_12/LPUART2_RTS_B/CT1_MAT2/PWM0_X0, direction: OUTPUT, gpio_init_state: 'true'}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */
/* clang-format on */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitLEDPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitLEDPins(void)
{
    /* Write to GPIO3: Peripheral clock is enabled */
    CLOCK_EnableClock(kCLOCK_GateGPIO3);
    /* Write to PORT3: Peripheral clock is enabled */
    CLOCK_EnableClock(kCLOCK_GatePORT3);
    /* GPIO3 peripheral is released from reset */
    RESET_ReleasePeripheralReset(kGPIO3_RST_SHIFT_RSTn);
    /* PORT3 peripheral is released from reset */
    RESET_ReleasePeripheralReset(kPORT3_RST_SHIFT_RSTn);

    gpio_pin_config_t LED_R_config = {
        .pinDirection = kGPIO_DigitalOutput,
        .outputLogic = 1U
    };
    /* Initialize GPIO functionality on pin PIO3_12 (pin 38)  */
    GPIO_PinInit(BOARD_INITLEDPINS_LED_R_GPIO, BOARD_INITLEDPINS_LED_R_PIN, &LED_R_config);

    /* PORT3_12 (pin 38) is configured as P3_12 */
    PORT_SetPinMux(BOARD_INITLEDPINS_LED_R_PORT, BOARD_INITLEDPINS_LED_R_PIN, kPORT_MuxAlt0);

    PORT3->PCR[12] = ((PORT3->PCR[12] &
                       /* Mask bits to zero which are setting */
                       (~(PORT_PCR_IBE_MASK)))

                      /* Input Buffer Enable: Enables. */
                      | PORT_PCR_IBE(PCR_IBE_ibe1));
}

/* clang-format off */
/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitDbgUARTPins:
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
- pin_list:
  - {pin_num: '51', peripheral: LPUART0, signal: RX, pin_signal: P0_2/TDO/SWO/LPUART0_RXD/LPSPI0_SCK/CT0_MAT0/UTICK_CAP0/I3C0_PUR}
  - {pin_num: '52', peripheral: LPUART0, signal: TX, pin_signal: P0_3/TDI/LPUART0_TXD/LPSPI0_SDO/CT0_MAT1/UTICK_CAP1/CMP0_OUT/CMP1_IN1}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */
/* clang-format on */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : BOARD_InitDbgUARTPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void BOARD_InitDbgUARTPins(void)
{
    /* Write to PORT0: Peripheral clock is enabled */
    CLOCK_EnableClock(kCLOCK_GatePORT0);
    /* LPUART0 peripheral is released from reset */
    RESET_ReleasePeripheralReset(kLPUART0_RST_SHIFT_RSTn);
    /* PORT0 peripheral is released from reset */
    RESET_ReleasePeripheralReset(kPORT0_RST_SHIFT_RSTn);

    /* PORT0_2 (pin 51) is configured as LPUART0_RXD */
    PORT_SetPinMux(PORT0, 2U, kPORT_MuxAlt2);

    PORT0->PCR[2] = ((PORT0->PCR[2] &
                      /* Mask bits to zero which are setting */
                      (~(PORT_PCR_IBE_MASK)))

                     /* Input Buffer Enable: Enables. */
                     | PORT_PCR_IBE(PCR_IBE_ibe1));

    /* PORT0_3 (pin 52) is configured as LPUART0_TXD */
    PORT_SetPinMux(PORT0, 3U, kPORT_MuxAlt2);

    PORT0->PCR[3] = ((PORT0->PCR[3] &
                      /* Mask bits to zero which are setting */
                      (~(PORT_PCR_IBE_MASK)))

                     /* Input Buffer Enable: Enables. */
                     | PORT_PCR_IBE(PCR_IBE_ibe1));
}
/***********************************************************************************************************************
 * EOF
 **********************************************************************************************************************/