#!/bin/bash

run_jlinkserver() {
	JLinkGDBServerCLExe -if SWD -device NUC220LE3AN \
		-ir -nogui \
		-localhostonly -port 3333 \
		-rtos GDBServer/RTOSPlugin_FreeRTOS.so
}

run_openocd_jlink() {
	openocd -f "interface/jlink.cfg" -c "transport select swd" -f "target/numicro.cfg"
}

run_pyocd() {
	echo "Note: pyOCD uses low level DAP APIs provided by J-LINK," \
		"speed settings and other functions may not available."
	pyocd gdbserver -t nuc220le3an -f 4m --persist
}

case $1 in
jlink)
	run_jlinkserver
	;;

pyocd)
	run_pyocd
	;;

openocd-jlink)
	run_openocd_jlink
	;;

*)
	echo "Usage: run_debugserver.sh jlink|pyocd|openocd-jlink"
	;;
esac