NXP_PN512_NFCReaderLibrary/intfs/phPlatform_Port_Pi_PN5180.h

62 lines
2.3 KiB
C

/*
* phPlatform_Port_Pi_RC523.h
*
* Created on: May 24, 2016
* Author: nxp69678
*/
#ifndef PHPLATFORM_PORT_PI_PN5180_H
#define PHPLATFORM_PORT_PI_PN5180_H
#include <ph_Status.h>
#if defined (NXPBUILD__PHHAL_HW_PN5180) && \
defined (NXPBUILD__PH_RASPBERRY_PI)
#define PIN_RESET 7 /**< "/sys/class/gpio/gpio7/" */
#define PIN_IRQ 23 /**< "/sys/class/gpio/gpio23/" */
#define PIN_BUSY 25 /**< "/sys/class/gpio/gpio25/" */
#define SPI_BUS 0 /**< "/dev/spidev0.0" */
#define SPI_CS 0 /**< "/dev/spidev0.0" */
#define SPI_FREQ 5000000 /**< 5 MHz. */
#define RESET_POWERDOWN_LEVEL PH_PLATFORM_SET_LOW
#define RESET_POWERUP_LEVEL PH_PLATFORM_SET_HIGH
#define RF_IRQ_Handler CLIF_IRQHandler
#define IRQ_PIN_TRIGGER_TYPE PHPLATFORM_PORT_INT_RISING_EDGE
#define BUSY_PIN_TRIGGER_TYPE PHPLATFORM_PORT_INT_FALLING_EDGE
/* Interface select pin configuration */
#define PORT_IFSEL
#define PIN_IFSEL0
#define PIN_IFSEL1
/* I2C Address pin configuration */
#define PORT_AD0 /* Port of LPC1769 used to connect I2C address pin from Blueboard Pn512 v1.5. */
#define PORT_AD1 /* Port of LPC1769 used to connect I2C address pin from Blueboard Pn512 v1.5. */
#define PIN_AD0 /* I2C address pin1 from Blueboard Pn512 v1.5 connection to LPC1769. */
#define PIN_AD1 /* I2C address pin2 from Blueboard Pn512 v1.5 connection to LPC1769. */
#define PORT_AD2 /* Port of LPC1769 used to connect I2C address pin from Blueboard Pn512 v1.5. */
#define PIN_AD2 /* I2C address pin3 from Blueboard Pn512 v1.5 connection to LPC1769. */
#define EINT_IRQn /* External interrupt that needs to be enabled on controller to receive interrupts from FE. */
#define EINT_PRIORITY /* Priority of the external interrupt. */
/* I2C Configuration */
#define LPC_I2C
#define LPC_DIS_I2C_IRQ
#define PORT_SDA
#define PIN_SDA
#define PORT_SCL
#define PIN_SCL
#endif /* NXPBUILD__PHHAL_HW_PN5180 && NXPBUILD__PH_RASPBERRY_PI */
#endif /* PHPLATFORM_PORT_PI_PN5180_H */