434 lines
18 KiB
C
434 lines
18 KiB
C
/*
|
|
* Copyright (c), NXP Semiconductors Gratkorn / Austria
|
|
*
|
|
* (C)NXP Semiconductors
|
|
* All rights are reserved. Reproduction in whole or in part is
|
|
* prohibited without the written consent of the copyright owner.
|
|
* NXP reserves the right to make changes without notice at any time.
|
|
* NXP makes no warranty, expressed, implied or statutory, including but
|
|
* not limited to any implied warranty of merchantability or fitness for any
|
|
* particular purpose, or that the use will not infringe any third party patent,
|
|
* copyright or trademark. NXP must not be liable for any loss or damage
|
|
* arising from its use.
|
|
*/
|
|
|
|
/** \file
|
|
* Status Code definitions for Reader Library Framework.
|
|
* $Author: Kiran Kumar Makam Nataraja (nxp69453) $
|
|
* $Revision: 5621 $ (v4.040.05.011646)
|
|
* $Date: 2016-08-01 19:45:19 +0530 (Mon, 01 Aug 2016) $
|
|
*
|
|
* History:
|
|
* CHu: Generated 19. May 2009
|
|
*
|
|
*/
|
|
|
|
#ifndef PH_STATUS_H
|
|
#define PH_STATUS_H
|
|
|
|
#ifndef NXPBUILD_DELETE
|
|
#include <ph_NxpBuild.h>
|
|
#endif /* NXPBUILD_DELETE */
|
|
|
|
#include <ph_TypeDefs.h>
|
|
|
|
#ifdef _WIN32
|
|
#pragma warning(push) /* PRQA S 3116 */
|
|
#pragma warning(disable:4001) /* PRQA S 3116 */
|
|
#include <string.h>
|
|
#pragma warning(pop) /* PRQA S 3116 */
|
|
#else
|
|
#include <string.h>
|
|
#endif
|
|
|
|
#ifdef NXPBUILD__PH_LOG
|
|
#include <phLog.h>
|
|
#endif
|
|
|
|
/** \defgroup ph_Error Error Code Collection
|
|
* \brief Common Error Codes
|
|
* @{
|
|
*/
|
|
|
|
/** \name Success Codes
|
|
*/
|
|
/*@{*/
|
|
#define PH_ERR_SUCCESS 0x0000U /**< Returned in case of no error. */
|
|
#define PH_ERR_SUCCESS_CHAINING 0x0071U /**< Rx chaining is not complete, further action needed. */
|
|
#define PH_ERR_SUCCESS_ACK 0x0072U /**< Received ACK packet for a previous transmitted packet. */
|
|
#define PH_ERR_SUCCESS_INCOMPLETE_BYTE 0x0073U /**< An incomplete byte was received. */
|
|
#define PH_ERR_SUCCESS_DESELECTED 0x0074U /**< DSL is sent for de-selection of target. */
|
|
#define PH_ERR_SUCCESS_RELEASED 0x0075U /**< RLS is sent for release of target. */
|
|
#define PH_ERR_SUCCESS_INFO_RECEIVED 0x0076U /**< Received I PDU in response for an I PDU. */
|
|
/*@}*/
|
|
|
|
/** \name Communication Errors
|
|
*/
|
|
/*@{*/
|
|
#define PH_ERR_IO_TIMEOUT 0x0001U /**< No reply received, e.g. PICC removal. */
|
|
#define PH_ERR_INTEGRITY_ERROR 0x0002U /**< Wrong CRC or parity detected. */
|
|
#define PH_ERR_COLLISION_ERROR 0x0003U /**< A collision occurred. */
|
|
#define PH_ERR_BUFFER_OVERFLOW 0x0004U /**< Attempt to write beyond buffer size. */
|
|
#define PH_ERR_FRAMING_ERROR 0x0005U /**< Invalid frame format. */
|
|
#define PH_ERR_PROTOCOL_ERROR 0x0006U /**< Received response violates protocol. */
|
|
#define PH_ERR_AUTH_ERROR 0x0007U /**< Authentication error. */
|
|
#define PH_ERR_READ_WRITE_ERROR 0x0008U /**< A Read or Write error occurred in RAM/ROM or Flash. */
|
|
#define PH_ERR_TEMPERATURE_ERROR 0x0009U /**< The RC sensors signal over heating. */
|
|
#define PH_ERR_RF_ERROR 0x000AU /**< Error due to RF. */
|
|
#define PH_ERR_INTERFACE_ERROR 0x000BU /**< An error occurred in RC communication. */
|
|
#define PH_ERR_LENGTH_ERROR 0x000CU /**< A length error occurred. */
|
|
#define PH_ERR_RESOURCE_ERROR 0x000DU /**< An resource error. */
|
|
#define PH_ERR_TX_NAK_ERROR 0x000EU /**< TX Rejected sanely by the counterpart. */
|
|
#define PH_ERR_RX_NAK_ERROR 0x000FU /**< RX request Rejected sanely by the counterpart. */
|
|
#define PH_ERR_EXT_RF_ERROR 0x0010U /**< Error due to External RF. */
|
|
#define PH_ERR_NOISE_ERROR 0x0011U /**< EMVCo EMD Noise Error. */
|
|
#define PH_ERR_ABORTED 0x0012U /**< Used when HAL ShutDown is called. */
|
|
#define PH_ERR_INTERNAL_ERROR 0x007FU /**< An internal error occurred. */
|
|
/*@}*/
|
|
|
|
/** \name Parameter & Command Errors
|
|
*/
|
|
/*@{*/
|
|
#define PH_ERR_INVALID_DATA_PARAMS 0x0020U /**< Invalid data parameters supplied (layer id check failed). */
|
|
#define PH_ERR_INVALID_PARAMETER 0x0021U /**< Invalid parameter supplied. */
|
|
#define PH_ERR_PARAMETER_OVERFLOW 0x0022U /**< Reading/Writing a parameter would produce an overflow. */
|
|
#define PH_ERR_UNSUPPORTED_PARAMETER 0x0023U /**< Parameter not supported. */
|
|
#define PH_ERR_UNSUPPORTED_COMMAND 0x0024U /**< Command not supported. */
|
|
#define PH_ERR_USE_CONDITION 0x0025U /**< Condition of use not satisfied. */
|
|
#define PH_ERR_KEY 0x0026U /**< A key error occurred. */
|
|
|
|
/*@}*/
|
|
|
|
/** \Osal Errors
|
|
*/
|
|
/*@{*/
|
|
#define PH_ERR_OSAL_ERROR 0x0027U /**< Error occurred during initialization. */
|
|
#define PH_ERR_OSAL_FAILURE 0x0028U /**< OSAL failed to perform the requested operation. */
|
|
/*@}*/
|
|
|
|
/** \Event Errors
|
|
*/
|
|
/*@{*/
|
|
#define PH_ERR_EVENT_ERROR 0x0029U /**< Error occurred during initialization. */
|
|
#define PH_ERR_EVENT_FAILURE 0x0030U /**< Event failed to perform the requested operation. */
|
|
/*@}*/
|
|
|
|
|
|
/** @} */
|
|
|
|
/** \defgroup ph_Status Generic Definitions
|
|
* \brief Contains definitions which are generic throughout the library
|
|
* @{
|
|
*/
|
|
|
|
|
|
/**
|
|
* \name Running Modes of Reader Library
|
|
*/
|
|
/*@{*/
|
|
#define RD_LIB_MODE_EMVCO 0x01U /**< EMVCo Mode. */
|
|
#define RD_LIB_MODE_NFC 0x02U /**< NFC Forum Mode. */
|
|
#define RD_LIB_MODE_ISO 0x03U /**< ISO Mode. */
|
|
/*@}*/
|
|
|
|
/**
|
|
* \name Boolean Values
|
|
*/
|
|
/*@{*/
|
|
#define PH_ON 0x0001U /**< Enabled. */
|
|
#define PH_OFF 0x0000U /**< Disabled. */
|
|
#define PH_SUPPORTED 0x0001U /**< Supported. */
|
|
#define PH_UNSUPPORTED 0x0000U /**< Not Supported. */
|
|
/*@}*/
|
|
|
|
/**
|
|
* \name Configuration
|
|
*/
|
|
/*@{*/
|
|
#define PH_CONFIG_CUSTOM_BEGIN 0xE000U /**< Starting number of custom configs. */
|
|
/*@}*/
|
|
|
|
/**
|
|
* \name Component identifiers
|
|
*/
|
|
/*@{*/
|
|
#define PH_COMP_MASK 0xFF00U /**< Component Mask for status code and component ID. */
|
|
#define PH_COMPID_MASK 0x00FFU /**< ID Mask for component ID. */
|
|
#define PH_ERR_MASK 0x00FFU /**< Error Mask for status code. */
|
|
#define PH_ERR_CUSTOM_BEGIN 0x0080U /**< Starting number of custom error codes. */
|
|
#define PH_COMP_GENERIC 0x0000U /**< Generic Component Code. */
|
|
#define PH_COMP_BAL 0x0100U /**< BAL Component Code. */
|
|
#define PH_COMP_HAL 0x0200U /**< HAL Component Code. */
|
|
#define PH_COMP_PAL_ISO14443P3A 0x0300U /**< ISO14443-3A PAL-Component Code. */
|
|
#define PH_COMP_PAL_ISO14443P3B 0x0400U /**< ISO14443-3B PAL-Component Code. */
|
|
#define PH_COMP_PAL_ISO14443P4A 0x0500U /**< ISO14443-4A PAL-Component Code. */
|
|
#define PH_COMP_PAL_ISO14443P4 0x0600U /**< ISO14443-4 PAL-Component Code. */
|
|
#define PH_COMP_PAL_MIFARE 0x0700U /**< MIFARE(R) PAL-Component Code. */
|
|
#define PH_COMP_PAL_FELICA 0x0800U /**< Open FeliCa PAL-Component Code. */
|
|
#define PH_COMP_PAL_EPCUID 0x0900U /**< ICode EPC/UID PAL-Component Code. */
|
|
#define PH_COMP_PAL_SLI15693 0x0A00U /**< ICode SLI/ISO15693 PAL-Component Code. */
|
|
#define PH_COMP_PAL_I18000P3M3 0x0B00U /**< ISO18000-3 Mode3 PAL-Component Code. */
|
|
#define PH_COMP_PAL_I18092MPI 0x0C00U /**< ISO18092 passive initiator mode PAL-Component Code. */
|
|
#define PH_COMP_PAL_I18092MT 0x0D00U /**< ISO18092 target mode PAL-Component Code. */
|
|
#define PH_COMP_PAL_GENERALTARGET 0x0E00U /**< General Target/Listen mode protocol. */
|
|
#define PH_COMP_PAL_I14443P4MC 0x0F00U /**< ISO 14443-4 Card mode protocol. */
|
|
#define PH_COMP_AL_MFC 0x1000U /**< MIFARE(R) Classic AL-Component Code. */
|
|
#define PH_COMP_AL_MFUL 0x1100U /**< MIFARE(R) Ultralight AL-Component Code. */
|
|
#define PH_COMP_AL_MFP 0x1200U /**< MIFARE(R) Plus AL-Component Code. */
|
|
#define PH_COMP_AL_VCA 0x1300U /**< Virtual Card Architecture AL-Component Code. */
|
|
#define PH_COMP_AL_FELICA 0x1400U /**< Open FeliCa AL-Component Code. */
|
|
#define PH_COMP_AL_I15693 0x1500U /**< ISO15693 AL-Component Code. */
|
|
#define PH_COMP_AL_SLI 0x1600U /**< ICode SLI AL-Component Code. */
|
|
#define PH_COMP_AL_I18000P3M3 0x1800U /**< ISO18000-3 Mode3 AL-Component Code. */
|
|
#define PH_COMP_AL_MFDF 0x1900U /**< MIFARE DESFIRE EV1 AL Component Code. */
|
|
#define PH_COMP_AL_MFDFEV2 0x2000U /**< MIFARE DESFIRE EV2 AL Component Code. */
|
|
#define PH_COMP_AL_P40CMDPRIV 0x1A00U /**< P40 command libraryAL-Component Code. */
|
|
#define PH_COMP_AL_P40CMDPUB 0x1B00U /**< P40 command libraryAL-Component Code. */
|
|
#define PH_COMP_AL_T1T 0x1C00U /**< T1T AL component code */
|
|
#define PH_COMP_AL_TOP 0x1D00U /**< Tag Operation AL component code */
|
|
#define PH_COMP_DL_AMP 0x3000U /**< Amplifier DL-Component Code. */
|
|
#define PH_COMP_DL_THSTRM 0x3100U /**< Thermostream DL-Component Code. */
|
|
#define PH_COMP_DL_OSCI 0x3200U /**< Oscilloscope DL-Component Code. */
|
|
#define PH_COMP_DL_RDFPGA 0x3300U /**< Reader FPGA Box DL-Component Code. */
|
|
#define PH_COMP_DL_MSTAMPOSC 0x3400U /**< Master Amplifier Oscilloscope DL-Component Code. */
|
|
#define PH_COMP_DL_STEPPER 0x3500U /**< Stepper DL-Component Code. */
|
|
#define PH_COMP_AC_DISCLOOP 0x4000U /**< Discovery Loop. */
|
|
#define PH_COMP_CE_T4T 0x5000U /**< Card Emulation T4T. */
|
|
#define PH_COMP_LN_LLCP 0x6000U /**< LLCP code. */
|
|
#define PH_COMP_NP_SNEP 0x7000U /**< SNEP Code. */
|
|
#define PH_COMP_CIDMANAGER 0xE000U /**< Cid Manager Component Code. */
|
|
#define PH_COMP_CRYPTOSYM 0xE100U /**< CryptoSym Component Code. */
|
|
#define PH_COMP_KEYSTORE 0xE200U /**< KeyStore Component Code. */
|
|
#define PH_COMP_TOOLS 0xE300U /**< Tools Component Code. */
|
|
#define PH_COMP_CRYPTORNG 0xE400U /**< CryptoRng Component Code. */
|
|
#define PH_COMP_LOG 0xEF00U /**< Log Component Code. */
|
|
#define PH_COMP_OSAL 0xF000U /**< OS AL component code. */
|
|
#define PH_COMP_PLATFORM 0xF100U /**< MicroController Platform component code. */
|
|
/*@}*/
|
|
|
|
/**
|
|
* Macro for error handling of underlying layer and exit.
|
|
*/
|
|
#define PH_CHECK_SUCCESS(status) {if ((status) != PH_ERR_SUCCESS) {return (status);}}
|
|
#define PH_CHECK_SUCCESS_FCT(status,fct) {(status) = (fct); PH_CHECK_SUCCESS(status);}
|
|
#define PH_CHECK_SUCCESS_FCT_POS(status,fct) {(status) = (fct);}
|
|
|
|
#define PH_CHECK_ABORT(status) {if ((status & PH_ERR_MASK) == PH_ERR_ABORTED) {return (status);}}
|
|
#define PH_CHECK_ABORT_FCT(status,fct) {(status) = (fct); PH_CHECK_ABORT(status);}
|
|
|
|
/**
|
|
* Macro for component-error-code adding of current layer.
|
|
*/
|
|
#define PH_ADD_COMPCODE(stat, code) ((phStatus_t)(((stat) == PH_ERR_SUCCESS) || ((stat) & PH_COMP_MASK) ? (stat) : (((stat) & PH_ERR_MASK) | ((code) & PH_COMP_MASK))))
|
|
#define PH_ADD_COMPCODE_NEG(stat, code) ((phStatus_t)((stat) & PH_ERR_MASK) | ((code) & PH_COMP_MASK))
|
|
#define PH_ADD_COMPCODE_POS(stat, code) ((phStatus_t)(stat))
|
|
/**
|
|
* Macro to get the component code or id using a pointer to a memory.
|
|
*/
|
|
#define PH_GET_COMPCODE(pId) ( (*((uint16_t*)(pId))) & PH_COMP_MASK )
|
|
#define PH_GET_COMPID(pId) ( (uint8_t)(*((uint16_t*)(pId))) )
|
|
|
|
/** \name Exchange Options
|
|
*/
|
|
/*@{*/
|
|
/**
|
|
Default exchange mode.
|
|
Combine with #PH_EXCHANGE_BUFFERED_BIT and
|
|
#PH_EXCHANGE_LEAVE_BUFFER_BIT to perform buffering.
|
|
\c ISO14443-4/ISO18092 specific:
|
|
Performs Tx/Rx chaining with the card.
|
|
Returns #PH_ERR_SUCCESS_CHAINING when RxBuffer is full and
|
|
does not ACK the last received block.
|
|
*/
|
|
#define PH_EXCHANGE_DEFAULT 0x0000U
|
|
|
|
/**
|
|
\c ISO14443-4/ISO18092 specific:
|
|
Chains given data to card/Target.
|
|
Combine with #PH_EXCHANGE_BUFFERED_BIT and
|
|
#PH_EXCHANGE_LEAVE_BUFFER_BIT to perform buffering.
|
|
Does not receive any data.
|
|
*/
|
|
#define PH_EXCHANGE_TXCHAINING 0x0001U
|
|
|
|
/**
|
|
\c ISO14443-4/ISO18092 specific:
|
|
Starts transmission with and R(ACK) block and
|
|
performs Rx chaining with the Card/Target.
|
|
Returns #PH_ERR_SUCCESS_CHAINING when RxBuffer is full and
|
|
does not ACK the last received block.
|
|
*/
|
|
#define PH_EXCHANGE_RXCHAINING 0x0002U
|
|
|
|
/**
|
|
\c ISO14443-4/ISO18092 specific:
|
|
Starts transmission with and R(ACK) block and
|
|
performs Rx chaining with the card.
|
|
Completes Rx chaining with the card if RxBuffer is full.
|
|
*/
|
|
#define PH_EXCHANGE_RXCHAINING_BUFSIZE 0x0003U
|
|
|
|
/** Mask for the above modes. All other bits are reserved. */
|
|
#define PH_EXCHANGE_MODE_MASK 0x000FU
|
|
|
|
/** Mask for custom exchange bits. These 4 bits can be used for custom exchange behavior. */
|
|
#define PH_EXCHANGE_CUSTOM_BITS_MASK 0x00F0U
|
|
|
|
/**
|
|
Does not clear the internal buffer before operation.
|
|
If this bit is set and data is transmitted,
|
|
the contents of the internal buffer are sent first.
|
|
*/
|
|
#define PH_EXCHANGE_LEAVE_BUFFER_BIT 0x4000U
|
|
|
|
/**
|
|
Buffers Tx-Data into internal buffer
|
|
instead of transmitting it.
|
|
*/
|
|
#define PH_EXCHANGE_BUFFERED_BIT 0x8000U
|
|
|
|
/**
|
|
The given data is the first part of a stream.
|
|
(Helper definition for buffering).
|
|
*/
|
|
#define PH_EXCHANGE_BUFFER_FIRST (PH_EXCHANGE_DEFAULT | PH_EXCHANGE_BUFFERED_BIT)
|
|
|
|
/**
|
|
The given data is a subsequent part of a stream.
|
|
(Helper definition for buffering).
|
|
*/
|
|
#define PH_EXCHANGE_BUFFER_CONT (PH_EXCHANGE_DEFAULT | PH_EXCHANGE_BUFFERED_BIT | PH_EXCHANGE_LEAVE_BUFFER_BIT)
|
|
|
|
/**
|
|
The given data is the last part of a stream.
|
|
(Helper definition for buffering).
|
|
*/
|
|
#define PH_EXCHANGE_BUFFER_LAST (PH_EXCHANGE_DEFAULT | PH_EXCHANGE_LEAVE_BUFFER_BIT)
|
|
|
|
/**
|
|
Default transmit mode.
|
|
Combine with #PH_TRANSMIT_BUFFERED_BIT and
|
|
#PH_TRANSMIT_LEAVE_BUFFER_BIT to perform buffering.
|
|
*/
|
|
#define PH_TRANSMIT_DEFAULT 0x0000U
|
|
|
|
/**
|
|
Perform Transmit Chaining.
|
|
Combine with #PH_TRANSMIT_BUFFERED_BIT and
|
|
#PH_TRANSMIT_LEAVE_BUFFER_BIT to perform buffering.
|
|
*/
|
|
#define PH_TRANSMIT_TXCHAINING 0x0001U
|
|
|
|
/** Mask for the above modes. All other bits are reserved. */
|
|
#define PH_TRANSMIT_MODE_MASK 0x000FU
|
|
|
|
/**
|
|
Does not clear the internal buffer before transmit operation.
|
|
If this bit is set and data is transmitted,
|
|
the contents of the internal buffer are sent first.
|
|
*/
|
|
#define PH_TRANSMIT_LEAVE_BUFFER_BIT 0x4000U
|
|
|
|
/**
|
|
Buffers Tx-Data into internal buffer
|
|
instead of transmitting it.
|
|
*/
|
|
#define PH_TRANSMIT_BUFFERED_BIT 0x8000U
|
|
|
|
/**
|
|
The given data is the first part of a stream.
|
|
(Helper definition for buffering).
|
|
*/
|
|
#define PH_TRANSMIT_BUFFER_FIRST (PH_TRANSMIT_DEFAULT | PH_TRANSMIT_BUFFERED_BIT)
|
|
|
|
/**
|
|
The given data is a subsequent part of a stream.
|
|
(Helper definition for buffering).
|
|
*/
|
|
#define PH_TRANSMIT_BUFFER_CONT (PH_TRANSMIT_DEFAULT | PH_TRANSMIT_BUFFERED_BIT | PH_TRANSMIT_LEAVE_BUFFER_BIT)
|
|
|
|
/**
|
|
The given data is the last part of a stream.
|
|
(Helper definition for buffering).
|
|
*/
|
|
#define PH_TRANSMIT_BUFFER_LAST (PH_TRANSMIT_DEFAULT | PH_TRANSMIT_LEAVE_BUFFER_BIT)
|
|
|
|
/**
|
|
Perform Re-transmit of data stored in HAL Tx buffer.
|
|
Should not be combined with #PH_TRANSMIT_BUFFERED_BIT and #PH_TRANSMIT_LEAVE_BUFFER_BIT.
|
|
This option should be used only in target / PICC mode.
|
|
*/
|
|
#define PH_TRANSMIT_PREV_FRAME 0x1000U
|
|
|
|
/**
|
|
Default exchange mode.
|
|
\c ISO14443-4/ISO18092 specific:
|
|
Performs Rx chaining with the card.
|
|
Returns #PH_ERR_SUCCESS_CHAINING when RxBuffer is full and
|
|
does not ACK the last received block.
|
|
*/
|
|
#define PH_RECEIVE_DEFAULT 0x0000U
|
|
|
|
/**
|
|
\c ISO14443-4/ISO18092 specific:
|
|
Starts transmission of ACK block and
|
|
performs Rx chaining with the card.
|
|
Returns #PH_ERR_SUCCESS_CHAINING when RxBuffer is full and
|
|
does not ACK the last received block.
|
|
*/
|
|
#define PH_RECEIVE_CHAINING 0x0001U
|
|
|
|
/**
|
|
\c ISO14443-4/ISO18092 specific:
|
|
Starts transmission with ACK block and
|
|
performs Rx chaining with the card.
|
|
Completes Rx chaining with the card if RxBuffer is full.
|
|
*/
|
|
#define PH_RECEIVE_CHAINING_BUFSIZE 0x0002U
|
|
/*@}*/
|
|
|
|
/** \name Log Interface
|
|
*/
|
|
/*@{*/
|
|
#ifdef NXPBUILD__PH_LOG
|
|
|
|
#define PH_LOG_HELPER_ALLOCATE_PARAMNAME(pParam) PH_LOG_ALLOCATE_PARAMNAME(pParam)
|
|
#define PH_LOG_HELPER_ALLOCATE_TEXT(pIdent, pText) PH_LOG_ALLOCATE_TEXT(pIdent, pText)
|
|
#define PH_LOG_HELPER_ADDSTRING(bLogType,pString) phLog_AddString(pDataParams, (bLogType), (pString))
|
|
#define PH_LOG_HELPER_ADDPARAM_UINT8(bLogType,pName,pParam) phLog_AddParam_Uint8(pDataParams, (bLogType), (pName), (pParam))
|
|
#define PH_LOG_HELPER_ADDPARAM_UINT16(bLogType,pName,pParam) phLog_AddParam_Uint16(pDataParams, (bLogType), (pName), (pParam))
|
|
#define PH_LOG_HELPER_ADDPARAM_UINT32(bLogType,pName,pParam) phLog_AddParam_Uint32(pDataParams, (bLogType), (pName), (pParam))
|
|
#define PH_LOG_HELPER_ADDPARAM_BUFFER(bLogType,pName,pParam,wLength) phLog_AddParam_Buffer(pDataParams, (bLogType),(pName),(pParam),(wLength))
|
|
#define PH_LOG_HELPER_EXECUTE(bOption) phLog_Execute(pDataParams, (bOption))
|
|
|
|
#else
|
|
|
|
#define PH_LOG_HELPER_ALLOCATE_PARAMNAME(pParam)
|
|
#define PH_LOG_HELPER_ALLOCATE_TEXT(pIdent, pText)
|
|
#define PH_LOG_HELPER_ADDSTRING(bLogType,pString)
|
|
#define PH_LOG_HELPER_ADDPARAM_UINT8(bLogType,pName,pParam)
|
|
#define PH_LOG_HELPER_ADDPARAM_UINT16(bLogType,pName,pParam)
|
|
#define PH_LOG_HELPER_ADDPARAM_UINT32(bLogType,pName,pParam)
|
|
#define PH_LOG_HELPER_ADDPARAM_BUFFER(bLogType,pName,pParam,wLength)
|
|
#define PH_LOG_HELPER_EXECUTE(bOption)
|
|
|
|
#endif
|
|
/*@}*/
|
|
|
|
/** @}
|
|
* end of ph_Status group
|
|
*/
|
|
|
|
/** \name Debug Definitions
|
|
*/
|
|
/*@{*/
|
|
#ifdef NXPBUILD__PH_DEBUG
|
|
# define PH_ASSERT_NULL(a) while((a) == NULL);
|
|
#endif /* NXPBUILD__PH_DEBUG */
|
|
#ifndef NXPBUILD__PH_DEBUG
|
|
# define PH_ASSERT_NULL(a)
|
|
#endif /* NXPBUILD__PH_DEBUG */
|
|
/*@}*/
|
|
#define PH_UNUSED_VARIABLE(x) for((x)=(x);(x)!=(x);)
|
|
#endif /* PH_STATUS_H */
|