Added config and patches for T113-miniEVM.
continuous-integration/drone/push Build was killed
Details
continuous-integration/drone/push Build was killed
Details
Signed-off-by: Yilin Sun <imi415@imi.moe>
This commit is contained in:
parent
48c9ae4442
commit
b8005a7276
|
|
@ -0,0 +1,14 @@
|
|||
CONFIG_LEDS_TRIGGER_MTD=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_SPI_NAND=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_MOTORCOMM_PHY=y
|
||||
CONFIG_TYPEC=y
|
||||
CONFIG_TYPEC_WUSB3801=y
|
||||
CONFIG_DRM_LONTIUM_LT8912B=y
|
||||
CONFIG_USB_ACM=y
|
||||
CONFIG_USB_SERIAL=y
|
||||
CONFIG_USB_SERIAL_FTDI_SIO=y
|
||||
CONFIG_USB_SERIAL_CP210X=y
|
||||
CONFIG_SYSVIPC=y
|
||||
|
|
@ -0,0 +1,322 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
// Copyright (C) 2022 Arm Ltd.
|
||||
/*
|
||||
* Common peripherals and configurations for MangoPi MQ-R boards.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <arm/allwinner/sun8i-t113s.dtsi>
|
||||
|
||||
/ {
|
||||
model = "Tronlong TLT113-MiniEVM";
|
||||
compatible = "tronlong,tlt113-minievm", "allwinner,sun8i-t113i";
|
||||
|
||||
aliases {
|
||||
serial2 = &uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:115200n8";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&pio 2 0 GPIO_ACTIVE_HIGH>; /* PC0 */
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_DISK;
|
||||
gpios = <&pio 2 1 GPIO_ACTIVE_HIGH>; /* PC1 */
|
||||
linux,default-trigger = "mtd";
|
||||
};
|
||||
|
||||
led-2 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
hdmi-connector {
|
||||
compatible = "hdmi-connector";
|
||||
ddc-i2c-bus = <&i2c0>;
|
||||
label = "hdmi";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&bridge_hdmi_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* EC2232E DC/DC regulator on SoM */
|
||||
reg_vcc5v: regulator-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc-5v";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* EC2232E DC/DC regulator on SoM */
|
||||
reg_3v3: regulator-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc-3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <®_vcc5v>;
|
||||
};
|
||||
|
||||
/* EC2232E DC/DC regulator on SoM, also supplying VDD-SYS */
|
||||
reg_vcc_core: regulator-core {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc-core";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
vin-supply = <®_vcc5v>;
|
||||
};
|
||||
|
||||
reg_vbus_supply: regulator-vbus-otg {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vbus-otg";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&pio 1 12 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <®_vcc5v>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <®_vcc_core>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <®_vcc_core>;
|
||||
};
|
||||
|
||||
&wdt {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dcxo {
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
&ehci1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
vcc-pb-supply = <®_3v3>;
|
||||
vcc-pd-supply = <®_3v3>;
|
||||
vcc-pe-supply = <®_3v3>;
|
||||
vcc-pf-supply = <®_3v3>;
|
||||
vcc-pg-supply = <®_3v3>;
|
||||
|
||||
uart2_pg_pins: uart2-pg-pins {
|
||||
pins = "PG17", "PG18";
|
||||
function = "uart2";
|
||||
};
|
||||
|
||||
rgmii_pg_pins: rgmii-pg-pins {
|
||||
pins = "PG0", "PG1", "PG2", "PG3", "PG4",
|
||||
"PG5", "PG6", "PG7", "PG8", "PG9",
|
||||
"PG10", "PG12", "PG14", "PG15";
|
||||
function = "emac";
|
||||
};
|
||||
|
||||
i2c0_pins: i2c0-pins {
|
||||
pins = "PB10", "PB11";
|
||||
function = "i2c0";
|
||||
};
|
||||
|
||||
i2c2_pins: i2c2-pins {
|
||||
pins = "PE12", "PE13";
|
||||
function = "i2c2";
|
||||
};
|
||||
|
||||
spi0_misc_pins: spi0-misc-pins {
|
||||
pins = "PC6", "PC7";
|
||||
function = "spi0";
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_pg_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-0 = <&mmc0_pins>;
|
||||
pinctrl-names = "default";
|
||||
vmmc-supply = <®_3v3>;
|
||||
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&emac {
|
||||
pinctrl-0 = <&rgmii_pg_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
phy-handle = <&ephy>;
|
||||
phy-mode = "rgmii-id";
|
||||
allwinner,tx-delay-ps = <200>;
|
||||
allwinner,rx-delay-ps = <0>;
|
||||
phy-supply = <®_3v3>;
|
||||
};
|
||||
|
||||
&mdio {
|
||||
ephy: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
reset-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */
|
||||
rx-internal-delay-ps = <600>;
|
||||
tx-internal-delay-ps = <450>;
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
status = "okay";
|
||||
|
||||
hdmi_lontium_lt8912: hdmi@48 {
|
||||
compatible = "lontium,lt8912b";
|
||||
reg = <0x48>;
|
||||
reset-gpios = <&pio 4 11 GPIO_ACTIVE_LOW>; /* PE11 */
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
bridge_dsi_in: endpoint {
|
||||
data-lanes = <0 1 2 3>;
|
||||
remote-endpoint = <&host_dsi_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
bridge_hdmi_out: endpoint {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
tcpc@60 {
|
||||
compatible = "willsemi,wusb3801";
|
||||
reg = <0x60>;
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <4 3 IRQ_TYPE_LEVEL_LOW>; /* PE3 */
|
||||
|
||||
connector {
|
||||
compatible = "usb-c-connector";
|
||||
label = "USB-C";
|
||||
vbus-supply = <®_vbus_supply>;
|
||||
power-role = "source";
|
||||
data-role = "dual";
|
||||
typec-power-opmode = "default";
|
||||
pd-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_pins &spi0_misc_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi_nand@0 {
|
||||
compatible = "spi-nand";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <80000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
partitions {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
compatible = "fixed-partitions";
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x100000>; /* 1MB */
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "env";
|
||||
reg = <0x100000 0x400000>; /* 4MB */
|
||||
};
|
||||
|
||||
partition@500000 {
|
||||
label = "rootfs";
|
||||
reg = <0x500000 0xfb00000>; /* 251MB */
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dsi {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port {
|
||||
host_dsi_out: endpoint {
|
||||
remote-endpoint = <&bridge_dsi_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcon_top {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcon_lcd0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_otg {
|
||||
dr_mode = "peripheral";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
usb1_vbus-supply = <®_vcc5v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -0,0 +1,78 @@
|
|||
BR2_arm=y
|
||||
BR2_cortex_a7=y
|
||||
BR2_BINUTILS_VERSION_2_41_X=y
|
||||
BR2_GCC_VERSION_13_X=y
|
||||
BR2_TOOLCHAIN_BUILDROOT_CXX=y
|
||||
BR2_PACKAGE_HOST_GDB=y
|
||||
BR2_PACKAGE_HOST_GDB_TUI=y
|
||||
BR2_TARGET_GENERIC_HOSTNAME="pudding-lwgw-t113i"
|
||||
BR2_TARGET_GENERIC_ISSUE="What GW?"
|
||||
BR2_INIT_SYSTEMD=y
|
||||
# BR2_TARGET_ENABLE_ROOT_LOGIN is not set
|
||||
BR2_SYSTEM_BIN_SH_BASH=y
|
||||
BR2_SYSTEM_DHCP="eth0"
|
||||
BR2_GENERATE_LOCALE="en_US.UTF-8"
|
||||
BR2_TARGET_LOCALTIME="Asia/Shanghai"
|
||||
BR2_ROOTFS_USERS_TABLES="$(BR2_EXTERNAL_lwgw_PATH)/customizations/users.table"
|
||||
BR2_ROOTFS_OVERLAY="$(BR2_EXTERNAL_lwgw_PATH)/customizations/overlay"
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_GIT=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/torvalds/linux.git"
|
||||
BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="de927f6c0b07d9e698416c5b287c521b07694cac"
|
||||
BR2_LINUX_KERNEL_PATCH="$(BR2_EXTERNAL_lwgw_PATH)/patches/kernel"
|
||||
BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
|
||||
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_lwgw_PATH)/board/t113i-minievm/linux.fragment"
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="$(BR2_EXTERNAL_lwgw_PATH)/board/t113i-minievm/sun8i-t113i-tronlong-tlt113-minievm.dts"
|
||||
BR2_LINUX_KERNEL_DTB_OVERLAY_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_INSTALL_TARGET=y
|
||||
BR2_PACKAGE_MTD=y
|
||||
BR2_PACKAGE_GPSD=y
|
||||
BR2_PACKAGE_GPSD_USER=y
|
||||
BR2_PACKAGE_GPSD_USER_VALUE="gpsd"
|
||||
BR2_PACKAGE_GPSD_GROUP=y
|
||||
BR2_PACKAGE_GPSD_GROUP_VALUE="gpsd"
|
||||
BR2_PACKAGE_GPSD_ASHTECH=y
|
||||
BR2_PACKAGE_GPSD_EARTHMATE=y
|
||||
BR2_PACKAGE_GPSD_EVERMORE=y
|
||||
BR2_PACKAGE_GPSD_FURY=y
|
||||
BR2_PACKAGE_GPSD_FV18=y
|
||||
BR2_PACKAGE_GPSD_GARMIN=y
|
||||
BR2_PACKAGE_GPSD_GARMIN_SIMPLE_TXT=y
|
||||
BR2_PACKAGE_GPSD_GEOSTAR=y
|
||||
BR2_PACKAGE_GPSD_GPSCLOCK=y
|
||||
BR2_PACKAGE_GPSD_GREIS=y
|
||||
BR2_PACKAGE_GPSD_ISYNC=y
|
||||
BR2_PACKAGE_GPSD_ITRAX=y
|
||||
BR2_PACKAGE_GPSD_NMEA2000=y
|
||||
BR2_PACKAGE_GPSD_OCEANSERVER=y
|
||||
BR2_PACKAGE_GPSD_ONCORE=y
|
||||
BR2_PACKAGE_GPSD_RTCM104V2=y
|
||||
BR2_PACKAGE_GPSD_RTCM104V3=y
|
||||
BR2_PACKAGE_GPSD_SIRF=y
|
||||
BR2_PACKAGE_GPSD_SKYTRAQ=y
|
||||
BR2_PACKAGE_GPSD_SUPERSTAR2=y
|
||||
BR2_PACKAGE_GPSD_TRIMBLE_TSIP=y
|
||||
BR2_PACKAGE_GPSD_TRIPMATE=y
|
||||
BR2_PACKAGE_GPSD_TRUE_NORTH=y
|
||||
BR2_PACKAGE_GPSD_UBX=y
|
||||
BR2_PACKAGE_I2C_TOOLS=y
|
||||
BR2_PACKAGE_MDIO_TOOLS=y
|
||||
BR2_PACKAGE_PPS_TOOLS=y
|
||||
BR2_PACKAGE_SYSSTAT=y
|
||||
BR2_PACKAGE_LIBCONFIG=y
|
||||
BR2_PACKAGE_CHRONY=y
|
||||
BR2_PACKAGE_IPERF3=y
|
||||
BR2_PACKAGE_MOSQUITTO=y
|
||||
BR2_PACKAGE_OPENSSH=y
|
||||
BR2_PACKAGE_SUDO=y
|
||||
BR2_PACKAGE_HTOP=y
|
||||
BR2_TARGET_ROOTFS_EXT2=y
|
||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
||||
BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
|
||||
BR2_TARGET_ROOTFS_UBI=y
|
||||
BR2_TARGET_ROOTFS_UBI_SUBSIZE=0
|
||||
BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1F000
|
||||
BR2_TARGET_ROOTFS_UBIFS_OPTS="-F"
|
||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
||||
BR2_PACKAGE_HOST_KMOD_XZ=y
|
||||
|
|
@ -0,0 +1,15 @@
|
|||
diff --git a/drivers/mtd/nand/spi/foresee.c b/drivers/mtd/nand/spi/foresee.c
|
||||
index e0d2d9257045..05b27341b9bd 100644
|
||||
--- a/drivers/mtd/nand/spi/foresee.c
|
||||
+++ b/drivers/mtd/nand/spi/foresee.c
|
||||
@@ -22,8 +22,8 @@ static SPINAND_OP_VARIANTS(write_cache_variants,
|
||||
SPINAND_PROG_LOAD(true, 0, NULL, 0));
|
||||
|
||||
static SPINAND_OP_VARIANTS(update_cache_variants,
|
||||
- SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
|
||||
- SPINAND_PROG_LOAD(false, 0, NULL, 0));
|
||||
+ SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
|
||||
+ SPINAND_PROG_LOAD(true, 0, NULL, 0));
|
||||
|
||||
static int f35sqa002g_ooblayout_ecc(struct mtd_info *mtd, int section,
|
||||
struct mtd_oob_region *region)
|
||||
Loading…
Reference in New Issue