113 lines
3.7 KiB
Plaintext
113 lines
3.7 KiB
Plaintext
/*!
|
|
@page middleware_log Middleware Change Log
|
|
|
|
@section sd SD Card driver for MCUXpresso SDK
|
|
The current driver version is 2.3.3.
|
|
|
|
- 2.3.3
|
|
- Improvements
|
|
- Added host SDR timing mode capability validation during card initialization.
|
|
- Added plling card ready for data status when transfer data failed.
|
|
- Used cache line size align buffer for SD initialization api.
|
|
- Bug Fixes
|
|
- Fixed violations of MISRA C-2012 rule 11.9, 15.7, 4.7, 16.4, 10.1, 10.3, 10.4, 11.3, 14.4, 10.6, 17.7, 16.1, 16.3.
|
|
|
|
- 2.3.2
|
|
- Improvements
|
|
- Moved power off function after card detect in SD_Init for DAT3 detect card feature.
|
|
|
|
- 2.3.1
|
|
- Improvements
|
|
- Removed the dead loop while polling DAT0 and CMD13 instead of using timeout mechanism.
|
|
|
|
- 2.3.0
|
|
- Improvements
|
|
- Marked api SD_HostReset/SD_PowerOnCard/SD_PowerOffCard/SD_WaitCardDetectStatus as deprecated.
|
|
- Added new api SD_SetCardPower/SD_PollingCardDetectStatus/SD_HostDoReset.
|
|
- Added internalBuffer in sd_card_t and removed rawCid/rawCsd/rawScr.
|
|
- Added retuning support during data transfer under SDR50/SDR104 mode.
|
|
- Increased the read/write blocks failed retry times for stability.
|
|
- Added delay while retry the ACMD41 for stability.
|
|
|
|
- 2.2.12
|
|
- Improvements
|
|
- Increased the sd io driver strength for SD2.0 card.
|
|
- Bug Fixes
|
|
- Fixed the build warning by changing the old style function declaration static
|
|
status_t inline to static inline status_t(found by adding
|
|
-Wold-style-declaration in armgcc build flag).
|
|
|
|
- 2.2.10
|
|
- Bug Fixes
|
|
- Added event value check for all the FreeRTOS events to fix program hangs
|
|
when a card event occurs before create.
|
|
|
|
- 2.2.7
|
|
- Bug Fixes
|
|
- Fixed MDK 66-D warning.
|
|
|
|
- 2.2.5
|
|
- Improvements
|
|
- Added SD_ReadStatus api to get 512bit SD status.
|
|
- Added error log support in sdcard functions.
|
|
- Added SDMMC_ENABLE_SOFTWARE_TUNING to enable/disable software tuning and it is disabled by default.
|
|
|
|
- 2.2.4
|
|
- Bug Fixes
|
|
- Fixed DDR mode data sequence miss issue, which is caused by NIBBLE_POS.
|
|
- Improvements
|
|
- Increased g_sdmmc 512byte to improve the performance when application use a non-word align data buffer address.
|
|
- Enabled auto cmd12 for SD read/write.
|
|
|
|
- 2.2.3
|
|
- Bug Fixes
|
|
- Added response check for send operation condition command. If not checked, the card may occasionally init fail.
|
|
|
|
- 2.2.1
|
|
- Improvements
|
|
- Kept SD_Init function for forward compatibility.
|
|
|
|
- 2.2.0
|
|
- Improvements
|
|
- Separated the SD/MMC/SDIO init API to xxx_CardInit/xxx_HostInit.
|
|
- SD_Init/SDIO_Init will be deprecated in the next version.
|
|
|
|
- 2.1.6
|
|
- Improvements
|
|
- Enhanced SD IO default driver strength.
|
|
|
|
- 2.1.5
|
|
- Bug Fixes
|
|
- Fixed Coverity issue.
|
|
- Fixed SD v1.x card write fail issue. It was caused by the block length set error.
|
|
- Fixed card cannot detect dynamically.
|
|
|
|
- 2.1.3
|
|
- Bug Fixes
|
|
- Fixed Non high-speed sdcard init fail at switch to high speed.
|
|
- Improvements
|
|
- Added Delay for SDCard power up.
|
|
|
|
- 2.1.2
|
|
- Improvements
|
|
- Improved SDMMC to support SD v3.0.
|
|
|
|
- 2.1.1
|
|
- Bug Fixes
|
|
- Fixed the bit mask error in the SD card switch to high speed function.
|
|
- Improvements
|
|
- Optimized the SD card initialization function.
|
|
|
|
- 2.1.0
|
|
- Bug Fixes
|
|
- Changed the callback mechanism when sending a command.
|
|
- Fixed the performance low issue when transferring data.
|
|
- Improvements
|
|
- Changed the name of some error codes returned by internal function.
|
|
- Merged all host related attributes to one structure.
|
|
|
|
- 2.0.0
|
|
- Initial version.
|
|
|
|
*/
|