2c14708bdb
> #### New features * Added support for USB interface between the HOST and the concentrator, for sx1250 based concentrator only. * Added support for Listen-Before-Talk for AS923 region, using the additional sx1261 radio from the Semtech Corecell reference design v3. * Added support for Spectral Scan with additional sx1261 radio from the Semtech Corecell reference design v3. * Added support for SX1303 chip, for further Fine Timestamping support. * Merged the master-fdd-cn490 branch to bring support for CN490 Full-Duplex reference design. It is an integration of the releases v1.1.0, v1.1.1, v1.1.2 described below. > #### Changes * HAL: Reworked the complete communication layer. A new loragw_com module has been introduced to handle switching from a USB or a SPI communication interface, aligned function prototypes for sx125x, sx1250 and sx1261 radios. For USB, a mode has been added to group SPI write commands request to the STM32 MCU, in order to optimize latency during time critical configuration phases. * HAL: Added preliminary support for Fine Timestamping for TDOA localization. * HAL: Updated AGC firmware to v6: add configurable delay for PA to start, add Listen-Before-Talk support. * HAL: Added new API function lgw_demod_setconf() to set global demodulator settings. * HAL: Added new API functions for Spectral Scan. * Packet Forwarder: The type of interface is configurable in the global_conf.json file: com_type can be "USB" or "SPI". * Packet Forwarder: Changed the parameters to configure fine timestamping in the global_conf.json. * Packet Forwarder: Added sections to configure the spectral scan and Listen-Before-Talk features. * Packet Forwarder: Added a new thread for background spectral scan example, to show how to use the spectral scan API provided by the HAL, without interfering with the main tasks of the gateway (aka Receive uplinks and transmit downlinks). * Packet Forwarder: Added "nhdr" field parsing from "txpk" JSON downlink request in order to be able to send beacon request from Network Server. * Packet Forwarder: Added chan_multiSF_All in global_conf.json to choose which spreading factors to enable for multi-sf demodulators. * Packet Forwarder: Updated PROTOCOL.md to v1.6. * Tools: added util_spectral_scan, a standalone spectral scanner utility. > #### Notes * This release has been validated on the Semtech Corecell reference design v3 with USB interface. v1.1.2 > Integrated in ***v2.0.0*** from ***master-fdd-cn490*** branch. * packet forwarder: updated global_conf.json.sx1255.CN490.full-duplex with RSSI temperature compensation coefficients, and updated RSSI offset for radio 1. v1.1.1 > Integrated in ***v2.0.0*** from ***master-fdd-cn490*** branch. * HAL: Updated SX1302 LNA/PA LUT configuration for Full Duplex CN490 reference design. * test_loragw_hal_rx/tx: added --fdd option to enable Full Duplex * packet forwarder: updated global_conf.json.sx1255.CN490.full-duplex for CN490 reference design. v1.1.0 > Integrated in ***v2.0.0*** from ***master-fdd-cn490*** branch. * HAL: Added support for CN490 full duplex reference design. |
||
|---|---|---|
| .. | ||
| src | ||
| Makefile | ||
| readme.md | ||
readme.md
______ _
/ _____) _ | |
( (____ _____ ____ _| |_ _____ ____| |__
\____ \| ___ | (_ _) ___ |/ ___) _ \
_____) ) ____| | | || |_| ____( (___| | | |
(______/|_____)_|_|_| \__)_____)\____)_| |_|
(C)2020 Semtech-Cycleo
Switch LoRa concentrator MCU to DFU mode (USB gateway)
1. Introduction
This software is used to switch the concentrator in DFU mode in order to program its internal MCU.
2. Usage
./boot -d /dev/ttyACMx
3. Program binary file into internal MCU flash memory
Download the dfu-util tool from here: http://dfu-util.sourceforge.net
sudo dfu-util -a 0 -s 0x08000000:leave -t 0 -D ../mcu_bin/xxx_fwm_xxx.bin
This will automatically exit the DFU bootloader mode, the concentrator is now ready to be used.
4. License
Copyright (c) 2020, SEMTECH S.A. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
- Neither the name of the Semtech corporation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SEMTECH S.A. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
EOF