Added BSP files.
continuous-integration/drone/push Build is passing
Details
continuous-integration/drone/push Build is passing
Details
Signed-off-by: Yilin Sun <imi415@imi.moe>
This commit is contained in:
parent
88a363043a
commit
5cc2960b3f
|
@ -0,0 +1,678 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32wlxx_nucleo.c
|
||||
* @author MCD Application Team
|
||||
* @brief This file provides set of firmware functions to manage:
|
||||
* - LEDs and push-buttons available on STM32WLXX-Nucleo
|
||||
* Kit from STMicroelectronics
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2020(-2021) STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32wlxx_nucleo.h"
|
||||
|
||||
/** @addtogroup BSP
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32WLXX_NUCLEO
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32WLXX_NUCLEO_LOW_LEVEL
|
||||
* @brief This file provides set of firmware functions to manage LEDs and push-buttons
|
||||
* on STM32WLXX-Nucleo Kit from STMicroelectronics.
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_Exported_Variables LOW LEVEL Exported Variables
|
||||
* @{
|
||||
*/
|
||||
EXTI_HandleTypeDef hpb_exti[BUTTONn];
|
||||
#if (USE_BSP_COM_FEATURE > 0)
|
||||
UART_HandleTypeDef hcom_uart[COMn];
|
||||
#endif /* (USE_BSP_COM_FEATURE > 0) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_Private_Defines LOW LEVEL Private Defines
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_Private_TypesDefinitions LOW LEVEL Private Typedef
|
||||
* @{
|
||||
*/
|
||||
typedef void (* BSP_EXTI_LineCallback) (void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_Private_Variables LOW LEVEL Private Variables
|
||||
* @{
|
||||
*/
|
||||
static GPIO_TypeDef* LED_PORT[LEDn] = {LED1_GPIO_PORT, LED2_GPIO_PORT, LED3_GPIO_PORT};
|
||||
|
||||
static const uint16_t LED_PIN[LEDn] = {LED1_PIN, LED2_PIN, LED3_PIN};
|
||||
|
||||
static GPIO_TypeDef* BUTTON_PORT[BUTTONn] = {BUTTON_SW1_GPIO_PORT, BUTTON_SW2_GPIO_PORT, BUTTON_SW3_GPIO_PORT};
|
||||
|
||||
static const uint16_t BUTTON_PIN[BUTTONn] = {BUTTON_SW1_PIN, BUTTON_SW2_PIN, BUTTON_SW3_PIN};
|
||||
|
||||
static const IRQn_Type BUTTON_IRQn[BUTTONn] = {BUTTON_SW1_EXTI_IRQn, BUTTON_SW2_EXTI_IRQn, BUTTON_SW3_EXTI_IRQn};
|
||||
|
||||
#if (USE_BSP_COM_FEATURE > 0)
|
||||
static USART_TypeDef* COM_USART[COMn] = {COM1_UART};
|
||||
|
||||
#if (USE_COM_LOG > 0)
|
||||
static COM_TypeDef COM_ActiveLogPort = COM1;
|
||||
#endif
|
||||
|
||||
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
|
||||
static uint32_t IsComMspCbValid[COMn] = {0};
|
||||
#endif
|
||||
#endif /* (USE_BSP_COM_FEATURE > 0) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_Private_Functions LOW LEVEL Private Functions
|
||||
* @{
|
||||
*/
|
||||
static void BUTTON_SW1_EXTI_Callback(void);
|
||||
static void BUTTON_SW2_EXTI_Callback(void);
|
||||
static void BUTTON_SW3_EXTI_Callback(void);
|
||||
#if (USE_BSP_COM_FEATURE > 0)
|
||||
static void COM1_MspInit(UART_HandleTypeDef *huart);
|
||||
static void COM1_MspDeInit(UART_HandleTypeDef *huart);
|
||||
#endif /* (USE_BSP_COM_FEATURE > 0) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup STM32WLXX_NUCLEO_LOW_LEVEL_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief This method returns the STM32WLXX NUCLEO BSP Driver revision
|
||||
* @retval version: 0xXYZR (8bits for each decimal, R for RC)
|
||||
*/
|
||||
uint32_t BSP_GetVersion(void)
|
||||
{
|
||||
return (int32_t)__STM32WLXX_NUCLEO_BSP_VERSION;
|
||||
}
|
||||
|
||||
/** @addtogroup STM32WLXX_NUCLEO_LOW_LEVEL_LED_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Configures LED GPIO.
|
||||
* @param Led: LED to be configured.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg LED1
|
||||
* @arg LED2
|
||||
* @arg LED3
|
||||
* @retval BSP status
|
||||
*/
|
||||
int32_t BSP_LED_Init(Led_TypeDef Led)
|
||||
{
|
||||
GPIO_InitTypeDef gpio_init_structure = {0};
|
||||
|
||||
/* Enable the GPIO_LED Clock */
|
||||
LEDx_GPIO_CLK_ENABLE(Led);
|
||||
|
||||
/* Configure the GPIO_LED pin */
|
||||
gpio_init_structure.Pin = LED_PIN[Led];
|
||||
gpio_init_structure.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
gpio_init_structure.Pull = GPIO_NOPULL;
|
||||
gpio_init_structure.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
|
||||
HAL_GPIO_Init(LED_PORT[Led], &gpio_init_structure);
|
||||
HAL_GPIO_WritePin(LED_PORT[Led], LED_PIN[Led], GPIO_PIN_RESET);
|
||||
|
||||
return BSP_ERROR_NONE;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief DeInit LEDs.
|
||||
* @param Led: LED to be de-init.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg LED1
|
||||
* @arg LED2
|
||||
* @arg LED3
|
||||
* @note Led DeInit does not disable the GPIO clock nor disable the Mfx
|
||||
* @retval BSP status
|
||||
*/
|
||||
int32_t BSP_LED_DeInit(Led_TypeDef Led)
|
||||
{
|
||||
/* Turn off LED */
|
||||
HAL_GPIO_WritePin(LED_PORT[Led], LED_PIN[Led], GPIO_PIN_RESET);
|
||||
|
||||
/* DeInit the GPIO_LED pin */
|
||||
HAL_GPIO_DeInit(LED_PORT[Led], LED_PIN[Led]);
|
||||
|
||||
return BSP_ERROR_NONE;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Turns selected LED On.
|
||||
* @param Led: Specifies the Led to be set on.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg LED1
|
||||
* @arg LED2
|
||||
* @arg LED3
|
||||
* @retval BSP status
|
||||
*/
|
||||
int32_t BSP_LED_On(Led_TypeDef Led)
|
||||
{
|
||||
HAL_GPIO_WritePin(LED_PORT[Led], LED_PIN[Led], GPIO_PIN_SET);
|
||||
|
||||
return BSP_ERROR_NONE;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Turns selected LED Off.
|
||||
* @param Led: Specifies the Led to be set off.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg LED1
|
||||
* @arg LED2
|
||||
* @arg LED3
|
||||
* @retval BSP status
|
||||
*/
|
||||
int32_t BSP_LED_Off(Led_TypeDef Led)
|
||||
{
|
||||
HAL_GPIO_WritePin(LED_PORT[Led], LED_PIN[Led], GPIO_PIN_RESET);
|
||||
|
||||
return BSP_ERROR_NONE;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Toggles the selected LED.
|
||||
* @param Led: Specifies the Led to be toggled.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg LED1
|
||||
* @arg LED2
|
||||
* @arg LED3
|
||||
* @retval BSP status
|
||||
*/
|
||||
int32_t BSP_LED_Toggle(Led_TypeDef Led)
|
||||
{
|
||||
HAL_GPIO_TogglePin(LED_PORT[Led], LED_PIN[Led]);
|
||||
|
||||
return BSP_ERROR_NONE;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get the status of the selected LED.
|
||||
* @param Led Specifies the Led to get its state.
|
||||
* This parameter can be one of following parameters:
|
||||
* @arg LED1
|
||||
* @arg LED2
|
||||
* @arg LED3
|
||||
* @retval LED status
|
||||
*/
|
||||
int32_t BSP_LED_GetState(Led_TypeDef Led)
|
||||
{
|
||||
return (int32_t)HAL_GPIO_ReadPin(LED_PORT[Led], LED_PIN[Led]);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32WLXX_NUCLEO_LOW_LEVEL_BUTTON_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Configures Button GPIO and EXTI Line.
|
||||
* @param Button: Specifies the Button to be configured.
|
||||
* This parameter can be one of following parameters:
|
||||
* @arg BUTTON_SW1
|
||||
* @arg BUTTON_SW2
|
||||
* @arg BUTTON_SW3
|
||||
* @param ButtonMode: Specifies Button mode.
|
||||
* This parameter can be one of following parameters:
|
||||
* @arg BUTTON_MODE_GPIO: Button will be used as simple IO
|
||||
* @arg BUTTON_MODE_EXTI: Button will be connected to EXTI line with interrupt
|
||||
* generation capability
|
||||
* @retval BSP status
|
||||
*/
|
||||
int32_t BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode)
|
||||
{
|
||||
GPIO_InitTypeDef gpio_init_structure = {0};
|
||||
static BSP_EXTI_LineCallback button_callback[BUTTONn] = {BUTTON_SW1_EXTI_Callback, BUTTON_SW2_EXTI_Callback, BUTTON_SW3_EXTI_Callback};
|
||||
static uint32_t button_interrupt_priority[BUTTONn] = {BSP_BUTTON_USER_IT_PRIORITY, BSP_BUTTON_USER_IT_PRIORITY, BSP_BUTTON_USER_IT_PRIORITY};
|
||||
static const uint32_t button_exti_line[BUTTONn] = {BUTTON_SW1_EXTI_LINE, BUTTON_SW2_EXTI_LINE, BUTTON_SW3_EXTI_LINE};
|
||||
|
||||
/* Enable the BUTTON Clock */
|
||||
BUTTONx_GPIO_CLK_ENABLE(Button);
|
||||
|
||||
gpio_init_structure.Pin = BUTTON_PIN[Button];
|
||||
gpio_init_structure.Pull = GPIO_PULLUP;
|
||||
gpio_init_structure.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
|
||||
if(ButtonMode == BUTTON_MODE_GPIO)
|
||||
{
|
||||
/* Configure Button pin as input */
|
||||
gpio_init_structure.Mode = GPIO_MODE_INPUT;
|
||||
HAL_GPIO_Init(BUTTON_PORT[Button], &gpio_init_structure);
|
||||
}
|
||||
else /* (ButtonMode == BUTTON_MODE_EXTI) */
|
||||
{
|
||||
/* Configure Button pin as input with External interrupt */
|
||||
gpio_init_structure.Mode = GPIO_MODE_IT_FALLING;
|
||||
|
||||
HAL_GPIO_Init(BUTTON_PORT[Button], &gpio_init_structure);
|
||||
|
||||
(void)HAL_EXTI_GetHandle(&hpb_exti[Button], button_exti_line[Button]);
|
||||
(void)HAL_EXTI_RegisterCallback(&hpb_exti[Button], HAL_EXTI_COMMON_CB_ID, button_callback[Button]);
|
||||
|
||||
/* Enable and set Button EXTI Interrupt to the lowest priority */
|
||||
HAL_NVIC_SetPriority((BUTTON_IRQn[Button]), button_interrupt_priority[Button], 0x00);
|
||||
HAL_NVIC_EnableIRQ((BUTTON_IRQn[Button]));
|
||||
}
|
||||
|
||||
return BSP_ERROR_NONE;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Push Button DeInit.
|
||||
* @param Button: Button to be configured
|
||||
* This parameter can be one of following parameters:
|
||||
* @arg BUTTON_SW1
|
||||
* @arg BUTTON_SW2
|
||||
* @arg BUTTON_SW3
|
||||
* @note PB DeInit does not disable the GPIO clock
|
||||
* @retval BSP status
|
||||
*/
|
||||
int32_t BSP_PB_DeInit(Button_TypeDef Button)
|
||||
{
|
||||
HAL_NVIC_DisableIRQ((BUTTON_IRQn[Button]));
|
||||
HAL_GPIO_DeInit(BUTTON_PORT[Button], BUTTON_PIN[Button]);
|
||||
|
||||
return BSP_ERROR_NONE;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Returns the selected Button state.
|
||||
* @param Button: Specifies the Button to be checked.
|
||||
* This parameter can be one of following parameters:
|
||||
* @arg BUTTON_SW1
|
||||
* @arg BUTTON_SW2
|
||||
* @arg BUTTON_SW3
|
||||
* @retval The Button GPIO pin value.
|
||||
*/
|
||||
int32_t BSP_PB_GetState(Button_TypeDef Button)
|
||||
{
|
||||
return (int32_t)HAL_GPIO_ReadPin(BUTTON_PORT[Button], BUTTON_PIN[Button]);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Push-Button interrupt requests.
|
||||
* @param Button Specifies the pin connected EXTI line
|
||||
* @retval None
|
||||
*/
|
||||
void BSP_PB_IRQHandler(Button_TypeDef Button)
|
||||
{
|
||||
HAL_EXTI_IRQHandler(&hpb_exti[Button]);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief BSP Push Button callback
|
||||
* @param Button: Specifies the Button to be checked.
|
||||
* This parameter can be one of following parameters:
|
||||
* @arg BUTTON_SW1
|
||||
* @arg BUTTON_SW2
|
||||
* @arg BUTTON_SW3
|
||||
* @retval None.
|
||||
*/
|
||||
__weak void BSP_PB_Callback(Button_TypeDef Button)
|
||||
{
|
||||
/* Prevent unused argument(s) compilation warning */
|
||||
UNUSED(Button);
|
||||
|
||||
/* This function should be implemented by the user application.
|
||||
It is called into this driver when an event on Button is triggered. */
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if (USE_BSP_COM_FEATURE > 0)
|
||||
/** @addtogroup STM32WLXX_NUCLEO_LOW_LEVEL_COM_Functions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief Configures COM port.
|
||||
* @param COM COM port to be configured.
|
||||
* This parameter can be COM1
|
||||
* @param COM_Init Pointer to a UART_HandleTypeDef structure that contains the
|
||||
* configuration information for the specified USART peripheral.
|
||||
* @retval BSP error code
|
||||
*/
|
||||
int32_t BSP_COM_Init(COM_TypeDef COM, COM_InitTypeDef *COM_Init)
|
||||
{
|
||||
int32_t ret = BSP_ERROR_NONE;
|
||||
|
||||
if(COM > COMn)
|
||||
{
|
||||
ret = BSP_ERROR_WRONG_PARAM;
|
||||
}
|
||||
else
|
||||
{
|
||||
#if (USE_HAL_UART_REGISTER_CALLBACKS == 0)
|
||||
/* Init the UART Msp */
|
||||
COM1_MspInit(&hcom_uart[COM]);
|
||||
#else
|
||||
if(IsComMspCbValid == 0U)
|
||||
{
|
||||
if(BSP_COM_RegisterDefaultMspCallbacks(COM) != BSP_ERROR_NONE)
|
||||
{
|
||||
return BSP_ERROR_MSP_FAILURE;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
if(MX_LPUART1_Init(&hcom_uart[COM], COM_Init) != HAL_OK)
|
||||
{
|
||||
return BSP_ERROR_PERIPH_FAILURE;
|
||||
}
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief DeInit COM port.
|
||||
* @param COM COM port to be configured.
|
||||
* This parameter can be COM1
|
||||
* @retval BSP status
|
||||
*/
|
||||
int32_t BSP_COM_DeInit(COM_TypeDef COM)
|
||||
{
|
||||
int32_t ret = BSP_ERROR_NONE;
|
||||
|
||||
if(COM >= COMn)
|
||||
{
|
||||
ret = BSP_ERROR_WRONG_PARAM;
|
||||
}
|
||||
else
|
||||
{
|
||||
/* USART configuration */
|
||||
hcom_uart[COM].Instance = COM_USART[COM];
|
||||
|
||||
#if (USE_HAL_UART_REGISTER_CALLBACKS == 0)
|
||||
COM1_MspDeInit(&hcom_uart[COM]);
|
||||
#endif /* (USE_HAL_UART_REGISTER_CALLBACKS == 0) */
|
||||
|
||||
if(HAL_UART_DeInit(&hcom_uart[COM]) != HAL_OK)
|
||||
{
|
||||
return BSP_ERROR_PERIPH_FAILURE;
|
||||
}
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configures COM port.
|
||||
* @param huart USART handle
|
||||
* @param COM_Init Pointer to a UART_HandleTypeDef structure that contains the
|
||||
* configuration information for the specified USART peripheral.
|
||||
* @retval HAL error code
|
||||
*/
|
||||
__weak HAL_StatusTypeDef MX_LPUART1_Init(UART_HandleTypeDef *huart, MX_UART_InitTypeDef *COM_Init)
|
||||
{
|
||||
/* USART configuration */
|
||||
huart->Instance = COM_USART[COM1];
|
||||
huart->Init.BaudRate = COM_Init->BaudRate;
|
||||
huart->Init.Mode = UART_MODE_TX_RX;
|
||||
huart->Init.Parity = (uint32_t)COM_Init->Parity;
|
||||
huart->Init.WordLength = COM_Init->WordLength;
|
||||
huart->Init.StopBits = (uint32_t)COM_Init->StopBits;
|
||||
huart->Init.HwFlowCtl = (uint32_t)COM_Init->HwFlowCtl;
|
||||
huart->Init.OverSampling = UART_OVERSAMPLING_8;
|
||||
|
||||
return HAL_UART_Init(huart);
|
||||
}
|
||||
|
||||
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief Register Default COM Msp Callbacks
|
||||
* @param COM COM port to be configured.
|
||||
* This parameter can be COM1
|
||||
* @retval BSP status
|
||||
*/
|
||||
int32_t BSP_COM_RegisterDefaultMspCallbacks(COM_TypeDef COM)
|
||||
{
|
||||
int32_t ret = BSP_ERROR_NONE;
|
||||
|
||||
if(COM >= COMn)
|
||||
{
|
||||
ret = BSP_ERROR_WRONG_PARAM;
|
||||
}
|
||||
else
|
||||
{
|
||||
__HAL_UART_RESET_HANDLE_STATE(&hcom_uart[COM]);
|
||||
|
||||
/* Register default MspInit/MspDeInit Callback */
|
||||
if(HAL_UART_RegisterCallback(&hcom_uart[COM], HAL_UART_MSPINIT_CB_ID, COM1_MspInit) != HAL_OK)
|
||||
{
|
||||
ret = BSP_ERROR_PERIPH_FAILURE;
|
||||
}
|
||||
else if(HAL_UART_RegisterCallback(&hcom_uart[COM], HAL_UART_MSPDEINIT_CB_ID, COM1_MspDeInit) != HAL_OK)
|
||||
{
|
||||
ret = BSP_ERROR_PERIPH_FAILURE;
|
||||
}
|
||||
else
|
||||
{
|
||||
IsComMspCbValid[COM] = 1U;
|
||||
}
|
||||
}
|
||||
|
||||
/* BSP status */
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Register COM Msp Callback registering
|
||||
* @param COM COM port to be configured.
|
||||
* This parameter can be COM1
|
||||
* @param Callbacks pointer to COM1 MspInit/MspDeInit callback functions
|
||||
* @retval BSP status
|
||||
*/
|
||||
int32_t BSP_COM_RegisterMspCallbacks(COM_TypeDef COM , BSP_COM_Cb_t *Callback)
|
||||
{
|
||||
int32_t ret = BSP_ERROR_NONE;
|
||||
|
||||
if(COM >= COMn)
|
||||
{
|
||||
ret = BSP_ERROR_WRONG_PARAM;
|
||||
}
|
||||
else
|
||||
{
|
||||
__HAL_UART_RESET_HANDLE_STATE(&hcom_uart[COM]);
|
||||
|
||||
/* Register MspInit/MspDeInit Callbacks */
|
||||
if(HAL_UART_RegisterCallback(&hcom_uart[COM], HAL_UART_MSPINIT_CB_ID, Callback->pMspInitCb) != HAL_OK)
|
||||
{
|
||||
ret = BSP_ERROR_PERIPH_FAILURE;
|
||||
}
|
||||
else if(HAL_UART_RegisterCallback(&hcom_uart[COM], HAL_UART_MSPDEINIT_CB_ID, Callback->pMspDeInitCb) != HAL_OK)
|
||||
{
|
||||
ret = BSP_ERROR_PERIPH_FAILURE;
|
||||
}
|
||||
else
|
||||
{
|
||||
IsComMspCbValid[COM] = 1U;
|
||||
}
|
||||
}
|
||||
/* BSP status */
|
||||
return ret;
|
||||
}
|
||||
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
|
||||
|
||||
#if (USE_COM_LOG > 0)
|
||||
/**
|
||||
* @brief Select the active COM port.
|
||||
* @param COM COM port to be activated.
|
||||
* This parameter can be COM1
|
||||
* @retval BSP status
|
||||
*/
|
||||
int32_t BSP_COM_SelectLogPort(COM_TypeDef COM)
|
||||
{
|
||||
if(COM_ActiveLogPort != COM)
|
||||
{
|
||||
COM_ActiveLogPort = COM;
|
||||
}
|
||||
return BSP_ERROR_NONE;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Redirect console output to COM
|
||||
*/
|
||||
#ifdef __GNUC__
|
||||
int __io_putchar (int ch)
|
||||
#else
|
||||
int fputc (int ch, FILE *f)
|
||||
#endif /* __GNUC__ */
|
||||
{
|
||||
(void) HAL_UART_Transmit(&hcom_uart [COM_ActiveLogPort], (uint8_t *) &ch, 1, COM_POLL_TIMEOUT);
|
||||
return ch;
|
||||
}
|
||||
#endif /* USE_COM_LOG */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* (USE_BSP_COM_FEATURE > 0) */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32WLXX_NUCLEO_LOW_LEVEL_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Button SW1 EXTI line detection callback.
|
||||
* @retval None
|
||||
*/
|
||||
static void BUTTON_SW1_EXTI_Callback(void)
|
||||
{
|
||||
BSP_PB_Callback(BUTTON_SW1);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Button SW2 EXTI line detection callback.
|
||||
* @retval None
|
||||
*/
|
||||
static void BUTTON_SW2_EXTI_Callback(void)
|
||||
{
|
||||
BSP_PB_Callback(BUTTON_SW2);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Button SW3 EXTI line detection callback.
|
||||
* @retval None
|
||||
*/
|
||||
static void BUTTON_SW3_EXTI_Callback(void)
|
||||
{
|
||||
BSP_PB_Callback(BUTTON_SW3);
|
||||
}
|
||||
|
||||
#if (USE_BSP_COM_FEATURE > 0)
|
||||
/**
|
||||
* @brief Initializes COM1 MSP.
|
||||
* @param huart UART handle
|
||||
* @retval BSP status
|
||||
*/
|
||||
static void COM1_MspInit(UART_HandleTypeDef *huart)
|
||||
{
|
||||
GPIO_InitTypeDef gpio_init_structure;
|
||||
|
||||
/* Prevent unused argument(s) compilation warning */
|
||||
UNUSED(huart);
|
||||
|
||||
/* Enable GPIO clock */
|
||||
COM1_TX_GPIO_CLK_ENABLE();
|
||||
COM1_RX_GPIO_CLK_ENABLE();
|
||||
|
||||
/* Enable USART clock */
|
||||
COM1_CLK_ENABLE();
|
||||
|
||||
/* Configure USART Tx as alternate function */
|
||||
gpio_init_structure.Pin = COM1_TX_PIN;
|
||||
gpio_init_structure.Mode = GPIO_MODE_AF_PP;
|
||||
gpio_init_structure.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
gpio_init_structure.Pull = GPIO_PULLUP;
|
||||
gpio_init_structure.Alternate = COM1_TX_AF;
|
||||
HAL_GPIO_Init(COM1_TX_GPIO_PORT, &gpio_init_structure);
|
||||
|
||||
/* Configure USART Rx as alternate function */
|
||||
gpio_init_structure.Pin = COM1_RX_PIN;
|
||||
gpio_init_structure.Mode = GPIO_MODE_AF_PP;
|
||||
gpio_init_structure.Alternate = COM1_RX_AF;
|
||||
HAL_GPIO_Init(COM1_RX_GPIO_PORT, &gpio_init_structure);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief DeInitialize COM1 MSP part
|
||||
* @param huart UART handle
|
||||
* @retval BSP status
|
||||
*/
|
||||
static void COM1_MspDeInit(UART_HandleTypeDef *huart)
|
||||
{
|
||||
GPIO_InitTypeDef gpio_init_structure;
|
||||
|
||||
/* Prevent unused argument(s) compilation warning */
|
||||
UNUSED(huart);
|
||||
|
||||
/* COM GPIO pin configuration */
|
||||
gpio_init_structure.Pin = COM1_TX_PIN;
|
||||
HAL_GPIO_DeInit(COM1_TX_GPIO_PORT, gpio_init_structure.Pin);
|
||||
|
||||
gpio_init_structure.Pin = COM1_RX_PIN;
|
||||
HAL_GPIO_DeInit(COM1_RX_GPIO_PORT, gpio_init_structure.Pin);
|
||||
|
||||
/* Disable USART clock */
|
||||
COM1_CLK_DISABLE();
|
||||
}
|
||||
#endif /* (USE_BSP_COM_FEATURE > 0) */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
@ -0,0 +1,355 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32wlxx_nucleo.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header for stm32wlxx_nucleo.c
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2020(-2021) STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32WLXX_NUCLEO_H
|
||||
#define STM32WLXX_NUCLEO_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32wlxx_nucleo_errno.h"
|
||||
#include "stm32wlxx_nucleo_conf.h"
|
||||
|
||||
#if (USE_BSP_COM_FEATURE > 0)
|
||||
#if (USE_COM_LOG > 0)
|
||||
#ifndef __GNUC__
|
||||
#include "stdio.h"
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/** @addtogroup BSP
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup STM32WLXX_NUCLEO STM32WLXX-NUCLEO
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL LOW LEVEL
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_Exported_Types LOW LEVEL Exported Types
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
LED1 = 0,
|
||||
LED2 = 1,
|
||||
LED3 = 2,
|
||||
/* Color led aliases */
|
||||
LED_BLUE = LED1,
|
||||
LED_GREEN = LED2,
|
||||
LED_RED = LED3
|
||||
}Led_TypeDef;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
BUTTON_SW1 = 0,
|
||||
BUTTON_SW2 = 1,
|
||||
BUTTON_SW3 = 2,
|
||||
}Button_TypeDef;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
BUTTON_MODE_GPIO = 0,
|
||||
BUTTON_MODE_EXTI = 1
|
||||
}ButtonMode_TypeDef;
|
||||
|
||||
#if (USE_BSP_COM_FEATURE > 0)
|
||||
typedef enum
|
||||
{
|
||||
COM1 = 0U,
|
||||
COMn
|
||||
}COM_TypeDef;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
COM_STOPBITS_1 = UART_STOPBITS_1,
|
||||
COM_STOPBITS_2 = UART_STOPBITS_2,
|
||||
}COM_StopBitsTypeDef;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
COM_PARITY_NONE = UART_PARITY_NONE,
|
||||
COM_PARITY_EVEN = UART_PARITY_EVEN,
|
||||
COM_PARITY_ODD = UART_PARITY_ODD,
|
||||
}COM_ParityTypeDef;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
COM_HWCONTROL_NONE = UART_HWCONTROL_NONE,
|
||||
COM_HWCONTROL_RTS = UART_HWCONTROL_RTS,
|
||||
COM_HWCONTROL_CTS = UART_HWCONTROL_CTS,
|
||||
COM_HWCONTROL_RTS_CTS = UART_HWCONTROL_RTS_CTS,
|
||||
}COM_HwFlowCtlTypeDef;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
COM_WORDLENGTH_7B = UART_WORDLENGTH_7B,
|
||||
COM_WORDLENGTH_8B = UART_WORDLENGTH_8B,
|
||||
COM_WORDLENGTH_9B = UART_WORDLENGTH_9B,
|
||||
}COM_WordLengthTypeDef;
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint32_t BaudRate;
|
||||
COM_WordLengthTypeDef WordLength;
|
||||
COM_StopBitsTypeDef StopBits;
|
||||
COM_ParityTypeDef Parity;
|
||||
COM_HwFlowCtlTypeDef HwFlowCtl;
|
||||
}COM_InitTypeDef;
|
||||
|
||||
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
|
||||
typedef struct
|
||||
{
|
||||
pUART_CallbackTypeDef pMspInitCb;
|
||||
pUART_CallbackTypeDef pMspDeInitCb;
|
||||
}BSP_COM_Cb_t;
|
||||
#endif /* (USE_HAL_UART_REGISTER_CALLBACKS == 1) */
|
||||
#endif /* (USE_BSP_COM_FEATURE > 0) */
|
||||
|
||||
typedef enum
|
||||
{
|
||||
ABSENT = 0,
|
||||
PRESENT = 1,
|
||||
}Presence_TypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_Exported_Constants LOW LEVEL Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief STM32WLXX NUCLEO BSP Driver version number
|
||||
*/
|
||||
#define __STM32WLXX_NUCLEO_BSP_VERSION_MAIN (0x01U) /*!< [31:24] main version */
|
||||
#define __STM32WLXX_NUCLEO_BSP_VERSION_SUB1 (0x01U) /*!< [23:16] sub1 version */
|
||||
#define __STM32WLXX_NUCLEO_BSP_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */
|
||||
#define __STM32WLXX_NUCLEO_BSP_VERSION_RC (0x00U) /*!< [7:0] release candidate */
|
||||
#define __STM32WLXX_NUCLEO_BSP_VERSION ((__STM32WLXX_NUCLEO_BSP_VERSION_MAIN << 24)\
|
||||
|(__STM32WLXX_NUCLEO_BSP_VERSION_SUB1 << 16)\
|
||||
|(__STM32WLXX_NUCLEO_BSP_VERSION_SUB2 << 8 )\
|
||||
|(__STM32WLXX_NUCLEO_BSP_VERSION_RC))
|
||||
|
||||
/**
|
||||
* @brief Define for STM32WLXX_NUCLEO board
|
||||
*/
|
||||
#if !defined (USE_STM32WLXX_NUCLEO)
|
||||
#define USE_STM32WLXX_NUCLEO
|
||||
#endif
|
||||
|
||||
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_LED LOW LEVEL LED Constants
|
||||
* @{
|
||||
*/
|
||||
#define LEDn 3
|
||||
|
||||
#define LED1_PIN GPIO_PIN_5
|
||||
#define LED1_GPIO_PORT GPIOB
|
||||
#define LED1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
|
||||
#define LED1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
|
||||
|
||||
#define LED2_PIN GPIO_PIN_4
|
||||
#define LED2_GPIO_PORT GPIOB
|
||||
#define LED2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
|
||||
#define LED2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
|
||||
|
||||
#define LED3_PIN GPIO_PIN_3
|
||||
#define LED3_GPIO_PORT GPIOB
|
||||
#define LED3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
|
||||
#define LED3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
|
||||
|
||||
#define LEDx_GPIO_CLK_ENABLE(__INDEX__) __HAL_RCC_GPIOB_CLK_ENABLE() /* All Led on same port */
|
||||
#define LEDx_GPIO_CLK_DISABLE(__INDEX__) __HAL_RCC_GPIOB_CLK_DISABLE() /* All Led on same port */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_BUTTON LOW LEVEL BUTTON Constants
|
||||
* @{
|
||||
*/
|
||||
#define BUTTONn 3
|
||||
|
||||
/**
|
||||
* @brief Key push-buttons
|
||||
*/
|
||||
#define BUTTON_SW1_PIN GPIO_PIN_0
|
||||
#define BUTTON_SW1_GPIO_PORT GPIOA
|
||||
#define BUTTON_SW1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
|
||||
#define BUTTON_SW1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
|
||||
#define BUTTON_SW1_EXTI_LINE EXTI_LINE_0
|
||||
#ifdef CORE_CM0PLUS
|
||||
#define BUTTON_SW1_EXTI_IRQn EXTI1_0_IRQn
|
||||
#else
|
||||
#define BUTTON_SW1_EXTI_IRQn EXTI0_IRQn
|
||||
#endif
|
||||
#define H_EXTI_0 hpb_exti[BUTTON_SW1]
|
||||
|
||||
#define BUTTON_SW2_PIN GPIO_PIN_1
|
||||
#define BUTTON_SW2_GPIO_PORT GPIOA
|
||||
#define BUTTON_SW2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
|
||||
#define BUTTON_SW2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
|
||||
#define BUTTON_SW2_EXTI_LINE EXTI_LINE_1
|
||||
|
||||
#define BUTTON_SW2_EXTI_IRQn EXTI1_IRQn
|
||||
|
||||
#define H_EXTI_1 hpb_exti[BUTTON_SW2]
|
||||
|
||||
#define BUTTON_SW3_PIN GPIO_PIN_4
|
||||
#define BUTTON_SW3_GPIO_PORT GPIOA
|
||||
#define BUTTON_SW3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
|
||||
#define BUTTON_SW3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
|
||||
|
||||
#define BUTTON_SW3_EXTI_LINE EXTI_LINE_4
|
||||
#define BUTTON_SW3_EXTI_IRQn EXTI4_IRQn
|
||||
|
||||
#define H_EXTI_4 hpb_exti[BUTTON_SW3]
|
||||
|
||||
#define BUTTONx_GPIO_CLK_ENABLE(__INDEX__) do { if ((__INDEX__) == BUTTON_SW1) BUTTON_SW1_GPIO_CLK_ENABLE(); else \
|
||||
if ((__INDEX__) == BUTTON_SW2) BUTTON_SW2_GPIO_CLK_ENABLE(); else \
|
||||
if ((__INDEX__) == BUTTON_SW3) BUTTON_SW3_GPIO_CLK_ENABLE();} while(0)
|
||||
|
||||
#define BUTTONx_GPIO_CLK_DISABLE(__INDEX__) do { if ((__INDEX__) == BUTTON_SW1) BUTTON_SW1_GPIO_CLK_DISABLE(); else \
|
||||
if ((__INDEX__) == BUTTON_SW2) BUTTON_SW2_GPIO_CLK_DISABLE(); else \
|
||||
if ((__INDEX__) == BUTTON_SW3) BUTTON_SW3_GPIO_CLK_DISABLE();} while(0)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if (USE_BSP_COM_FEATURE > 0)
|
||||
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_COM LOW LEVEL COM Port Constants
|
||||
* @{
|
||||
*/
|
||||
#define COM1_UART LPUART1
|
||||
#define COM1_CLK_ENABLE() __HAL_RCC_LPUART1_CLK_ENABLE()
|
||||
#define COM1_CLK_DISABLE() __HAL_RCC_LPUART1_CLK_DISABLE()
|
||||
|
||||
#define COM1_TX_PIN GPIO_PIN_2
|
||||
#define COM1_TX_GPIO_PORT GPIOA
|
||||
#define COM1_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
|
||||
#define COM1_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
|
||||
#define COM1_TX_AF GPIO_AF8_LPUART1
|
||||
|
||||
#define COM1_RX_PIN GPIO_PIN_3
|
||||
#define COM1_RX_GPIO_PORT GPIOA
|
||||
#define COM1_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
|
||||
#define COM1_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
|
||||
#define COM1_RX_AF GPIO_AF8_LPUART1
|
||||
#define COM_POLL_TIMEOUT 1000
|
||||
|
||||
#define MX_UART_InitTypeDef COM_InitTypeDef
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* (USE_BSP_COM_FEATURE > 0)*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32WLXX_NUCLEO_LOW_LEVEL_Exported_Variables
|
||||
* @{
|
||||
*/
|
||||
extern EXTI_HandleTypeDef hpb_exti[];
|
||||
#if (USE_BSP_COM_FEATURE > 0)
|
||||
extern UART_HandleTypeDef hcom_uart[];
|
||||
#endif /* (USE_BSP_COM_FEATURE > 0) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_Exported_Functions LOW LEVEL Exported Functions
|
||||
* @{
|
||||
*/
|
||||
uint32_t BSP_GetVersion(void);
|
||||
|
||||
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_LED_Functions LOW LEVEL LED Functions
|
||||
* @{
|
||||
*/
|
||||
int32_t BSP_LED_Init(Led_TypeDef Led);
|
||||
int32_t BSP_LED_DeInit(Led_TypeDef Led);
|
||||
int32_t BSP_LED_On(Led_TypeDef Led);
|
||||
int32_t BSP_LED_Off(Led_TypeDef Led);
|
||||
int32_t BSP_LED_Toggle(Led_TypeDef Led);
|
||||
int32_t BSP_LED_GetState(Led_TypeDef Led);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_BUTTON_Functions LOW LEVEL BUTTON Functions
|
||||
* @{
|
||||
*/
|
||||
int32_t BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode);
|
||||
int32_t BSP_PB_DeInit(Button_TypeDef Button);
|
||||
int32_t BSP_PB_GetState(Button_TypeDef Button);
|
||||
void BSP_PB_Callback(Button_TypeDef Button);
|
||||
void BSP_PB_IRQHandler(Button_TypeDef Button);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if (USE_BSP_COM_FEATURE > 0)
|
||||
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_COM_Functions LOW LEVEL COM Port Functions
|
||||
* @{
|
||||
*/
|
||||
int32_t BSP_COM_Init(COM_TypeDef COM, COM_InitTypeDef *COM_Init);
|
||||
int32_t BSP_COM_DeInit(COM_TypeDef COM);
|
||||
#if (USE_COM_LOG > 0)
|
||||
int32_t BSP_COM_SelectLogPort (COM_TypeDef COM);
|
||||
#endif
|
||||
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
|
||||
int32_t BSP_COM_RegisterDefaultMspCallbacks(COM_TypeDef COM);
|
||||
int32_t BSP_COM_RegisterMspCallbacks(COM_TypeDef COM , BSP_COM_Cb_t *Callback);
|
||||
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
|
||||
HAL_StatusTypeDef MX_LPUART1_Init(UART_HandleTypeDef *huart, MX_UART_InitTypeDef *COM_Init);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* (USE_BSP_COM_FEATURE > 0) */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32WLXX_NUCLEO_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -0,0 +1,47 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32wlxx_nucleo_errno.h
|
||||
* @author MCD Application Team
|
||||
* @brief Error Code.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2020(-2021) STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32WLXX_NUCLEO_ERRNO_H
|
||||
#define STM32WLXX_NUCLEO_ERRNO_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Common Error codes */
|
||||
#define BSP_ERROR_NONE 0
|
||||
#define BSP_ERROR_NO_INIT -1
|
||||
#define BSP_ERROR_WRONG_PARAM -2
|
||||
#define BSP_ERROR_BUSY -3
|
||||
#define BSP_ERROR_PERIPH_FAILURE -4
|
||||
#define BSP_ERROR_COMPONENT_FAILURE -5
|
||||
#define BSP_ERROR_UNKNOWN_FAILURE -6
|
||||
#define BSP_ERROR_UNKNOWN_COMPONENT -7
|
||||
#define BSP_ERROR_BUS_FAILURE -8
|
||||
#define BSP_ERROR_CLOCK_FAILURE -9
|
||||
#define BSP_ERROR_MSP_FAILURE -10
|
||||
#define BSP_ERROR_FEATURE_NOT_SUPPORTED -11
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32WLXX_NUCLEO_ERRNO_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
@ -0,0 +1,221 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32wlxx_nucleo_radio.c
|
||||
* @author MCD Application Team
|
||||
* @brief This file provides set of firmware functions to manage:
|
||||
* - RF circuitry available on STM32WLXX-Nucleo
|
||||
* Kit from STMicroelectronics
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2020-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32wlxx_nucleo_radio.h"
|
||||
|
||||
/** @addtogroup BSP
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32WLXX_NUCLEO
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32WLXX_NUCLEO_RADIO_LOW_LEVEL
|
||||
* @brief This file provides set of firmware functions to Radio switch
|
||||
* available on STM32WLXX-Nucleo Kit from STMicroelectronics.
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32WLXX_NUCLEO_RADIO_LOW_LEVEL_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Init Radio Switch
|
||||
* @retval BSP status
|
||||
*/
|
||||
int32_t BSP_RADIO_Init(void)
|
||||
{
|
||||
GPIO_InitTypeDef gpio_init_structure = {0};
|
||||
|
||||
/* Enable the Radio Switch Clock */
|
||||
RF_SW_CTRL3_GPIO_CLK_ENABLE();
|
||||
RF_SW_CTRL2_GPIO_CLK_ENABLE();
|
||||
RF_SW_CTRL1_GPIO_CLK_ENABLE();
|
||||
/* Configure the Radio Switch pin */
|
||||
gpio_init_structure.Pin = RF_SW_CTRL1_PIN;
|
||||
gpio_init_structure.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
gpio_init_structure.Pull = GPIO_NOPULL;
|
||||
gpio_init_structure.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
|
||||
HAL_GPIO_Init(RF_SW_CTRL1_GPIO_PORT, &gpio_init_structure);
|
||||
|
||||
gpio_init_structure.Pin = RF_SW_CTRL2_PIN;
|
||||
HAL_GPIO_Init(RF_SW_CTRL2_GPIO_PORT, &gpio_init_structure);
|
||||
|
||||
gpio_init_structure.Pin = RF_SW_CTRL3_PIN;
|
||||
HAL_GPIO_Init(RF_SW_CTRL3_GPIO_PORT, &gpio_init_structure);
|
||||
|
||||
HAL_GPIO_WritePin(RF_SW_CTRL2_GPIO_PORT, RF_SW_CTRL2_PIN, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RF_SW_CTRL1_GPIO_PORT, RF_SW_CTRL1_PIN, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RF_SW_CTRL3_GPIO_PORT, RF_SW_CTRL3_PIN, GPIO_PIN_RESET);
|
||||
|
||||
return BSP_ERROR_NONE;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief DeInit Radio Switch
|
||||
* @retval BSP status
|
||||
*/
|
||||
int32_t BSP_RADIO_DeInit(void)
|
||||
{
|
||||
RF_SW_CTRL3_GPIO_CLK_ENABLE();
|
||||
|
||||
/* Turn off switch */
|
||||
HAL_GPIO_WritePin(RF_SW_CTRL1_GPIO_PORT, RF_SW_CTRL1_PIN, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RF_SW_CTRL2_GPIO_PORT, RF_SW_CTRL2_PIN, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RF_SW_CTRL3_GPIO_PORT, RF_SW_CTRL3_PIN, GPIO_PIN_RESET);
|
||||
|
||||
/* DeInit the Radio Switch pin */
|
||||
HAL_GPIO_DeInit(RF_SW_CTRL1_GPIO_PORT, RF_SW_CTRL1_PIN);
|
||||
HAL_GPIO_DeInit(RF_SW_CTRL2_GPIO_PORT, RF_SW_CTRL2_PIN);
|
||||
HAL_GPIO_DeInit(RF_SW_CTRL3_GPIO_PORT, RF_SW_CTRL3_PIN);
|
||||
|
||||
return BSP_ERROR_NONE;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure Radio Switch.
|
||||
* @param Config: Specifies the Radio RF switch path to be set.
|
||||
* This parameter can be one of following parameters:
|
||||
* @arg RADIO_SWITCH_OFF
|
||||
* @arg RADIO_SWITCH_RX
|
||||
* @arg RADIO_SWITCH_RFO_LP
|
||||
* @arg RADIO_SWITCH_RFO_HP
|
||||
* @retval BSP status
|
||||
*/
|
||||
int32_t BSP_RADIO_ConfigRFSwitch(BSP_RADIO_Switch_TypeDef Config)
|
||||
{
|
||||
switch (Config)
|
||||
{
|
||||
case RADIO_SWITCH_OFF:
|
||||
{
|
||||
/* Turn off switch */
|
||||
HAL_GPIO_WritePin(RF_SW_CTRL3_GPIO_PORT, RF_SW_CTRL3_PIN, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RF_SW_CTRL1_GPIO_PORT, RF_SW_CTRL1_PIN, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RF_SW_CTRL2_GPIO_PORT, RF_SW_CTRL2_PIN, GPIO_PIN_RESET);
|
||||
break;
|
||||
}
|
||||
case RADIO_SWITCH_RX:
|
||||
{
|
||||
/*Turns On in Rx Mode the RF Switch */
|
||||
HAL_GPIO_WritePin(RF_SW_CTRL3_GPIO_PORT, RF_SW_CTRL3_PIN, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RF_SW_CTRL1_GPIO_PORT, RF_SW_CTRL1_PIN, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RF_SW_CTRL2_GPIO_PORT, RF_SW_CTRL2_PIN, GPIO_PIN_RESET);
|
||||
break;
|
||||
}
|
||||
case RADIO_SWITCH_RFO_LP:
|
||||
{
|
||||
/*Turns On in Tx Low Power the RF Switch */
|
||||
HAL_GPIO_WritePin(RF_SW_CTRL3_GPIO_PORT, RF_SW_CTRL3_PIN, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RF_SW_CTRL1_GPIO_PORT, RF_SW_CTRL1_PIN, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RF_SW_CTRL2_GPIO_PORT, RF_SW_CTRL2_PIN, GPIO_PIN_RESET);
|
||||
break;
|
||||
}
|
||||
case RADIO_SWITCH_RFO_HP:
|
||||
{
|
||||
/*Turns On in Tx High Power the RF Switch */
|
||||
HAL_GPIO_WritePin(RF_SW_CTRL3_GPIO_PORT, RF_SW_CTRL3_PIN, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RF_SW_CTRL1_GPIO_PORT, RF_SW_CTRL1_PIN, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RF_SW_CTRL2_GPIO_PORT, RF_SW_CTRL2_PIN, GPIO_PIN_RESET);
|
||||
break;
|
||||
}
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
return BSP_ERROR_NONE;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return Board Configuration
|
||||
* @retval
|
||||
* RADIO_CONF_RFO_LP_HP
|
||||
* RADIO_CONF_RFO_LP
|
||||
* RADIO_CONF_RFO_HP
|
||||
*/
|
||||
int32_t BSP_RADIO_GetTxConfig(void)
|
||||
{
|
||||
return RADIO_CONF_RFO_HP;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get If TCXO is to be present on board
|
||||
* @note never remove called by MW,
|
||||
* @retval
|
||||
* RADIO_CONF_TCXO_NOT_SUPPORTED
|
||||
* RADIO_CONF_TCXO_SUPPORTED
|
||||
*/
|
||||
int32_t BSP_RADIO_IsTCXO(void)
|
||||
{
|
||||
return RADIO_CONF_TCXO_NOT_SUPPORTED;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get If DCDC is to be present on board
|
||||
* @note never remove called by MW,
|
||||
* @retval
|
||||
* RADIO_CONF_DCDC_NOT_SUPPORTED
|
||||
* RADIO_CONF_DCDC_SUPPORTED
|
||||
*/
|
||||
int32_t BSP_RADIO_IsDCDC(void)
|
||||
{
|
||||
return RADIO_CONF_DCDC_SUPPORTED;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return RF Output Max Power Configuration
|
||||
* @retval
|
||||
* RADIO_CONF_RFO_LP_MAX_15_dBm for LP mode
|
||||
* RADIO_CONF_RFO_HP_MAX_22_dBm for HP mode
|
||||
*/
|
||||
int32_t BSP_RADIO_GetRFOMaxPowerConfig(BSP_RADIO_RFOMaxPowerConfig_TypeDef Config)
|
||||
{
|
||||
int32_t ret;
|
||||
|
||||
if(Config == RADIO_RFO_LP_MAXPOWER)
|
||||
{
|
||||
ret = RADIO_CONF_RFO_LP_MAX_15_dBm;
|
||||
}
|
||||
else
|
||||
{
|
||||
ret = RADIO_CONF_RFO_HP_MAX_22_dBm;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
|
@ -0,0 +1,160 @@
|
|||
/**
|
||||
******************************************************************************
|
||||
* @file stm32wlxx_nucleo_radio.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header for stm32wlxx_nucleo_radio.c
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2020(-2021) STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32WLXX_NUCLEO_RADIO_H
|
||||
#define STM32WLXX_NUCLEO_RADIO_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32wlxx_nucleo_errno.h"
|
||||
#include "stm32wlxx_nucleo_conf.h"
|
||||
|
||||
|
||||
/** @addtogroup BSP
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32WLXX_NUCLEO STM32WLXX-NUCLEO
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup STM32WLXX_NUCLEO_RADIO_LOW_LEVEL RADIO LOW LEVEL
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup STM32WLXX_NUCLEO_RADIO_LOW_LEVEL_Exported_Types RADIO LOW LEVEL Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
typedef enum
|
||||
{
|
||||
RADIO_SWITCH_OFF = 0,
|
||||
RADIO_SWITCH_RX = 1,
|
||||
RADIO_SWITCH_RFO_LP = 2,
|
||||
RADIO_SWITCH_RFO_HP = 3,
|
||||
}BSP_RADIO_Switch_TypeDef;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
RADIO_RFO_LP_MAXPOWER = 0,
|
||||
RADIO_RFO_HP_MAXPOWER,
|
||||
} BSP_RADIO_RFOMaxPowerConfig_TypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup STM32WLXX_NUCLEO_RADIO_LOW_LEVEL_Exported_Constants RADIO LOW LEVEL Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup STM32WLXX_NUCLEO_RADIO_LOW_LEVEL_RADIOCONFIG RADIO LOW LEVEL RADIO CONFIG Constants
|
||||
* @{
|
||||
*/
|
||||
#define RADIO_CONF_RFO_LP_HP 0U
|
||||
#define RADIO_CONF_RFO_LP 1U
|
||||
#define RADIO_CONF_RFO_HP 2U
|
||||
|
||||
#define RADIO_CONF_TCXO_NOT_SUPPORTED 0U
|
||||
#define RADIO_CONF_TCXO_SUPPORTED 1U
|
||||
|
||||
#define RADIO_CONF_DCDC_NOT_SUPPORTED 0U
|
||||
#define RADIO_CONF_DCDC_SUPPORTED 1U
|
||||
|
||||
#define RADIO_CONF_RFO_HP_MAX_22_dBm ((int32_t) 22)
|
||||
#define RADIO_CONF_RFO_HP_MAX_20_dBm ((int32_t) 20)
|
||||
#define RADIO_CONF_RFO_HP_MAX_17_dBm ((int32_t) 17)
|
||||
#define RADIO_CONF_RFO_HP_MAX_14_dBm ((int32_t) 14)
|
||||
#define RADIO_CONF_RFO_LP_MAX_15_dBm ((int32_t) 15)
|
||||
#define RADIO_CONF_RFO_LP_MAX_14_dBm ((int32_t) 14)
|
||||
#define RADIO_CONF_RFO_LP_MAX_10_dBm ((int32_t) 10)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup STM32WLXX_NUCLEO_RADIO_LOW_LEVEL_RFSWITCH RADIO LOW LEVEL RF SWITCH Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define RF_SW_CTRL3_PIN GPIO_PIN_8
|
||||
#define RF_SW_CTRL3_GPIO_PORT GPIOA
|
||||
#define RF_SW_CTRL3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
|
||||
#define RF_SW_CTRL3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
|
||||
|
||||
#define RF_SW_CTRL1_PIN GPIO_PIN_0
|
||||
#define RF_SW_CTRL1_GPIO_PORT GPIOB
|
||||
#define RF_SW_CTRL1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
|
||||
#define RF_SW_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
|
||||
|
||||
#define RF_SW_CTRL2_PIN GPIO_PIN_15
|
||||
#define RF_SW_CTRL2_GPIO_PORT GPIOA
|
||||
#define RF_SW_CTRL2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
|
||||
#define RF_SW_CTRL2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
|
||||
//未使用
|
||||
#define RF_TCXO_VCC_PIN
|
||||
#define RF_TCXO_VCC_GPIO_PORT
|
||||
#define RF_TCXO_VCC_CLK_ENABLE()
|
||||
#define RF_TCXO_VCC_CLK_DISABLE()
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup STM32WLXX_NUCLEO_RADIO_LOW_LEVEL_Exported_Functions RADIO LOW LEVEL Exported Functions
|
||||
* @{
|
||||
*/
|
||||
int32_t BSP_RADIO_Init(void);
|
||||
int32_t BSP_RADIO_DeInit(void);
|
||||
int32_t BSP_RADIO_ConfigRFSwitch(BSP_RADIO_Switch_TypeDef Config);
|
||||
int32_t BSP_RADIO_GetTxConfig(void);
|
||||
int32_t BSP_RADIO_IsTCXO(void);
|
||||
int32_t BSP_RADIO_IsDCDC(void);
|
||||
int32_t BSP_RADIO_GetRFOMaxPowerConfig(BSP_RADIO_RFOMaxPowerConfig_TypeDef Config);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32WLXX_NUCLEO_RADIO_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
|
@ -34,10 +34,11 @@ set(TARGET_C_DEFINES
|
|||
)
|
||||
|
||||
set(TARGET_C_INCLUDES
|
||||
"BSP"
|
||||
"MX_Generated/Core/Inc"
|
||||
"SDK/Drivers/CMSIS/Core/Include"
|
||||
"SDK/Drivers/CMSIS/Device/ST/STM32WLxx/Include"
|
||||
"SDK/Drivers/STM32WLxx_HAL_Driver/Inc"
|
||||
"MX_Generated/Core/Inc"
|
||||
"include"
|
||||
)
|
||||
|
||||
|
|
Loading…
Reference in New Issue