riscv-openocd-wch/doc/openocd.info

130 lines
3.8 KiB
Plaintext
Raw Permalink Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This is openocd.info, produced by makeinfo version 6.7 from
openocd.texi.
This User's Guide documents release 0.11.0+dev, dated 10 January 2022,
of the Open On-Chip Debugger (OpenOCD).
* Copyright (C) 2008 The OpenOCD Project
* Copyright (C) 2007-2008 Spencer Oliver <spen@spen-soft.co.uk>
* Copyright (C) 2008-2010 Oyvind Harboe <oyvind.harboe@zylin.com>
* Copyright (C) 2008 Duane Ellis <openocd@duaneellis.com>
* Copyright (C) 2009-2010 David Brownell
Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License,
Version 1.2 or any later version published by the Free Software
Foundation; with no Invariant Sections, no Front-Cover Texts, and
no Back-Cover Texts. A copy of the license is included in the
section entitled "GNU Free Documentation License".
INFO-DIR-SECTION Development
START-INFO-DIR-ENTRY
* OpenOCD: (openocd). OpenOCD User's Guide
END-INFO-DIR-ENTRY

Indirect:
openocd.info-1: 990
openocd.info-2: 323429

Tag Table:
(Indirect)
Node: Top990
Node: About3451
Node: Developers7783
Node: Debug Adapter Hardware11123
Node: About Jim-Tcl22766
Node: Running24911
Node: OpenOCD Project Setup30307
Ref: OpenOCD Project Setup-Footnote-150259
Ref: OpenOCD Project Setup-Footnote-250599
Ref: OpenOCD Project Setup-Footnote-350867
Node: Config File Guidelines51195
Ref: theinitboardprocedure62374
Ref: definecputargetsworkinginsmp69234
Ref: theinittargetsprocedure73714
Ref: theinittargeteventsprocedure75533
Ref: translatingconfigurationfiles77386
Ref: Config File Guidelines-Footnote-178613
Node: Server Configuration78688
Ref: configurationstage79010
Ref: enteringtherunstage80485
Ref: tcpipports83517
Ref: gdb_port84012
Ref: gdbconfiguration86270
Ref: gdbbreakpointoverride86585
Ref: gdbflashprogram86960
Ref: eventpolling88469
Node: Debug Adapter Configuration90905
Ref: adapter_usb_location93220
Ref: hla_interface121446
Ref: st_link_dap_interface123005
Ref: swimtransport138163
Ref: jtagspeed138930
Node: Reset Configuration141892
Ref: srstandtrstissues144820
Ref: reset_config149002
Node: TAP Declaration156914
Ref: enablinganddisablingtaps168573
Ref: autoprobing171220
Ref: dapdeclaration173875
Ref: dap_create174389
Ref: DAP subcommand apreg176636
Ref: TAP Declaration-Footnote-1179565
Node: CPU Configuration179765
Ref: targettypes182659
Ref: targetconfiguration186751
Ref: rtostype192545
Ref: gdbportoverride193694
Ref: targetcurstate197549
Ref: targetevents199538
Node: Flash Commands205640
Ref: norconfiguration207173
Ref: flashprogrammingcommands210410
Ref: flashprotect218190
Ref: program219016
Ref: flashdriverlist219296
Ref: at91samd238876
Ref: at91sam3242557
Ref: atsame5245913
Ref: nandconfiguration307324
Ref: nanddriverlist317710
Node: Flash Programming323429
Node: PLD/FPGA Commands325042
Node: General Commands327206
Ref: debuglevel329976
Ref: targetstatehandling331281
Ref: resetcommand335038
Ref: memoryaccess337457
Ref: imageaccess339326
Node: Architecture and Core Commands347063
Ref: armhardwaretracing347533
Ref: traceportdrivers355447
Ref: armcrosstrigger357178
Ref: arm9vectorcatch365465
Ref: xscalevectorcatch373370
Ref: add-reg-type-struct415786
Ref: softwaredebugmessagesandtracing417723
Node: JTAG Commands421192
Node: Boundary Scan Commands428682
Node: Utility Commands434392
Node: GDB and OpenOCD436237
Ref: programmingusinggdb441349
Ref: gdbmeminspect442995
Ref: gdbrtossupport444932
Ref: usingopenocdsmpwithgdb447374
Node: Tcl Scripting API449574
Node: FAQ453288
Ref: faqrtck453398
Ref: faqtaporder465289
Node: Tcl Crash Course467055
Node: License479058
Node: OpenOCD Concept Index501470
Node: Command and Driver Index525094

End Tag Table

Local Variables:
coding: utf-8
End: