Embedded_Projects
/
riscv-openocd-wch
1
0
Fork 1
Code Issues Pull Requests Projects Releases Wiki Activity
riscv-openocd-wch/jimtcl/jim.h

958 lines
39 KiB
C
Raw Permalink Blame History

/* Jim - A small embeddable Tcl interpreter
*
* Copyright 2005 Salvatore Sanfilippo <antirez@invece.org>
* Copyright 2005 Clemens Hintze <c.hintze@gmx.net>
* Copyright 2005 patthoyts - Pat Thoyts <patthoyts@users.sf.net>
* Copyright 2008 oharboe - Øyvind Harboe - oyvind.harboe@zylin.com
* Copyright 2008 Andrew Lunn <andrew@lunn.ch>
* Copyright 2008 Duane Ellis <openocd@duaneellis.com>
* Copyright 2008 Uwe Klein <uklein@klein-messgeraete.de>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE JIM TCL PROJECT ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* JIM TCL PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* The views and conclusions contained in the software and documentation
* are those of the authors and should not be interpreted as representing
* official policies, either expressed or implied, of the Jim Tcl Project.
*
*--- Inline Header File Documentation ---
* [By Duane Ellis, openocd@duaneellis.com, 8/18/8]
*
* Belief is "Jim" would greatly benefit if Jim Internals where
* documented in some way - form whatever, and perhaps - the package:
* 'doxygen' is the correct approach to do that.
*
* Details, see: http://www.stack.nl/~dimitri/doxygen/
*
* To that end please follow these guide lines:
*
* (A) Document the PUBLIC api in the .H file.
*
* (B) Document JIM Internals, in the .C file.
*
* (C) Remember JIM is embedded in other packages, to that end do
* not assume that your way of documenting is the right way, Jim's
* public documentation should be agnostic, such that it is some
* what agreeable with the "package" that is embedding JIM inside
* of it's own doxygen documentation.
*
* (D) Use minimal Doxygen tags.
*
* This will be an "ongoing work in progress" for some time.
**/
#ifndef __JIM__H
#define __JIM__H
#ifdef __cplusplus
extern "C" {
#endif
#include <time.h>
#include <limits.h>
#include <stdio.h> /* for the FILE typedef definition */
#include <stdlib.h> /* In order to export the Jim_Free() macro */
#include <stdarg.h> /* In order to get type va_list */
/* -----------------------------------------------------------------------------
* System configuration
* autoconf (configure) will set these
* ---------------------------------------------------------------------------*/
#include <jim-win32compat.h>
#ifndef HAVE_NO_AUTOCONF
#include <jim-config.h>
#endif
/* -----------------------------------------------------------------------------
* Compiler specific fixes.
* ---------------------------------------------------------------------------*/
/* Long Long type and related issues */
#ifndef jim_wide
# ifdef HAVE_LONG_LONG
# define jim_wide long long
# ifndef LLONG_MAX
# define LLONG_MAX 9223372036854775807LL
# endif
# ifndef LLONG_MIN
# define LLONG_MIN (-LLONG_MAX - 1LL)
# endif
# define JIM_WIDE_MIN LLONG_MIN
# define JIM_WIDE_MAX LLONG_MAX
# else
# define jim_wide long
# define JIM_WIDE_MIN LONG_MIN
# define JIM_WIDE_MAX LONG_MAX
# endif
/* -----------------------------------------------------------------------------
* LIBC specific fixes
* ---------------------------------------------------------------------------*/
# ifdef HAVE_LONG_LONG
# define JIM_WIDE_MODIFIER "lld"
# else
# define JIM_WIDE_MODIFIER "ld"
# define strtoull strtoul
# endif
#endif
#define UCHAR(c) ((unsigned char)(c))
/* -----------------------------------------------------------------------------
* Exported defines
* ---------------------------------------------------------------------------*/
/* Increment this every time the public ABI changes */
#define JIM_ABI_VERSION 100
#define JIM_OK 0
#define JIM_ERR 1
#define JIM_RETURN 2
#define JIM_BREAK 3
#define JIM_CONTINUE 4
#define JIM_SIGNAL 5
#define JIM_EXIT 6
/* The following are internal codes and should never been seen/used */
#define JIM_EVAL 7 /* tailcall */
#define JIM_MAX_CALLFRAME_DEPTH 1000 /* default max nesting depth for procs */
#define JIM_MAX_EVAL_DEPTH 2000 /* default max nesting depth for eval */
/* Some function get an integer argument with flags to change
* the behaviour. */
/* Starting from 1 << 20 flags are reserved for private uses of
* different calls. This way the same 'flags' argument may be used
* to pass both global flags and private flags. */
#define JIM_PRIV_FLAG_SHIFT 20
#define JIM_NONE 0 /* no flags set */
#define JIM_ERRMSG 1 /* set an error message in the interpreter. */
#define JIM_ENUM_ABBREV 2 /* Jim_GetEnum() - Allow unambiguous abbreviation */
#define JIM_UNSHARED 4 /* Jim_GetVariable() - return unshared object */
#define JIM_MUSTEXIST 8 /* Jim_SetDictKeysVector() - fail if non-existent */
/* Flags for Jim_SubstObj() */
#define JIM_SUBST_NOVAR 1 /* don't perform variables substitutions */
#define JIM_SUBST_NOCMD 2 /* don't perform command substitutions */
#define JIM_SUBST_NOESC 4 /* don't perform escapes substitutions */
#define JIM_SUBST_FLAG 128 /* flag to indicate that this is a real substitution object */
/* Flags used by API calls getting a 'nocase' argument. */
#define JIM_CASESENS 0 /* case sensitive */
#define JIM_NOCASE 1 /* no case */
#define JIM_OPT_END 2 /* if implemented by a command (e.g. regexp), add -- to the argument list */
/* Filesystem related */
#define JIM_PATH_LEN 1024
/* Unused arguments generate annoying warnings... */
#define JIM_NOTUSED(V) ((void) V)
#define JIM_LIBPATH "auto_path"
#define JIM_INTERACTIVE "tcl_interactive"
/* -----------------------------------------------------------------------------
* Stack
* ---------------------------------------------------------------------------*/
typedef struct Jim_Stack {
int len;
int maxlen;
void **vector;
} Jim_Stack;
/* -----------------------------------------------------------------------------
* Hash table
* ---------------------------------------------------------------------------*/
typedef struct Jim_HashEntry {
void *key;
union {
void *val;
int intval;
} u;
struct Jim_HashEntry *next;
} Jim_HashEntry;
typedef struct Jim_HashTableType {
unsigned int (*hashFunction)(const void *key);
void *(*keyDup)(void *privdata, const void *key);
void *(*valDup)(void *privdata, const void *obj);
int (*keyCompare)(void *privdata, const void *key1, const void *key2);
void (*keyDestructor)(void *privdata, void *key);
void (*valDestructor)(void *privdata, void *obj);
} Jim_HashTableType;
typedef struct Jim_HashTable {
Jim_HashEntry **table;
const Jim_HashTableType *type;
void *privdata;
unsigned int size;
unsigned int sizemask;
unsigned int used;
unsigned int collisions;
unsigned int uniq;
} Jim_HashTable;
typedef struct Jim_HashTableIterator {
Jim_HashTable *ht;
Jim_HashEntry *entry, *nextEntry;
int index;
} Jim_HashTableIterator;
/* This is the initial size of every hash table */
#define JIM_HT_INITIAL_SIZE 16
/* ------------------------------- Macros ------------------------------------*/
#define Jim_FreeEntryVal(ht, entry) \
if ((ht)->type->valDestructor) \
(ht)->type->valDestructor((ht)->privdata, (entry)->u.val)
#define Jim_SetHashVal(ht, entry, _val_) do { \
if ((ht)->type->valDup) \
(entry)->u.val = (ht)->type->valDup((ht)->privdata, (_val_)); \
else \
(entry)->u.val = (_val_); \
} while(0)
#define Jim_SetHashIntVal(ht, entry, _val_) (entry)->u.intval = (_val_)
#define Jim_FreeEntryKey(ht, entry) \
if ((ht)->type->keyDestructor) \
(ht)->type->keyDestructor((ht)->privdata, (entry)->key)
#define Jim_SetHashKey(ht, entry, _key_) do { \
if ((ht)->type->keyDup) \
(entry)->key = (ht)->type->keyDup((ht)->privdata, (_key_)); \
else \
(entry)->key = (void *)(_key_); \
} while(0)
#define Jim_CompareHashKeys(ht, key1, key2) \
(((ht)->type->keyCompare) ? \
(ht)->type->keyCompare((ht)->privdata, (key1), (key2)) : \
(key1) == (key2))
#define Jim_HashKey(ht, key) ((ht)->type->hashFunction(key) + (ht)->uniq)
#define Jim_GetHashEntryKey(he) ((he)->key)
#define Jim_GetHashEntryVal(he) ((he)->u.val)
#define Jim_GetHashEntryIntVal(he) ((he)->u.intval)
#define Jim_GetHashTableCollisions(ht) ((ht)->collisions)
#define Jim_GetHashTableSize(ht) ((ht)->size)
#define Jim_GetHashTableUsed(ht) ((ht)->used)
/* -----------------------------------------------------------------------------
* Jim_Obj structure
* ---------------------------------------------------------------------------*/
/* -----------------------------------------------------------------------------
* Jim object. This is mostly the same as Tcl_Obj itself,
* with the addition of the 'prev' and 'next' pointers.
* In Jim all the objects are stored into a linked list for GC purposes,
* so that it's possible to access every object living in a given interpreter
* sequentially. When an object is freed, it's moved into a different
* linked list, used as object pool.
*
* The refcount of a freed object is always -1.
* ---------------------------------------------------------------------------*/
typedef struct Jim_Obj {
char *bytes; /* string representation buffer. NULL = no string repr. */
const struct Jim_ObjType *typePtr; /* object type. */
int refCount; /* reference count */
int length; /* number of bytes in 'bytes', not including the null term. */
/* Internal representation union */
union {
/* integer number type */
jim_wide wideValue;
/* generic integer value (e.g. index, return code) */
int intValue;
/* double number type */
double doubleValue;
/* Generic pointer */
void *ptr;
/* Generic two pointers value */
struct {
void *ptr1;
void *ptr2;
} twoPtrValue;
/* Generic pointer, int, int value */
struct {
void *ptr;
int int1;
int int2;
} ptrIntValue;
/* Variable object */
struct {
struct Jim_Var *varPtr;
unsigned long callFrameId; /* for caching */
int global; /* If the variable name is globally scoped with :: */
} varValue;
/* Command object */
struct {
struct Jim_Obj *nsObj;
struct Jim_Cmd *cmdPtr;
unsigned long procEpoch; /* for caching */
} cmdValue;
/* List object */
struct {
struct Jim_Obj **ele; /* Elements vector */
int len; /* Length */
int maxLen; /* Allocated 'ele' length */
} listValue;
/* dict object */
struct Jim_Dict *dictValue;
/* String type */
struct {
int maxLength;
int charLength; /* utf-8 char length. -1 if unknown */
} strValue;
/* Reference type */
struct {
unsigned long id;
struct Jim_Reference *refPtr;
} refValue;
/* Source type */
struct {
struct Jim_Obj *fileNameObj;
int lineNumber;
} sourceValue;
/* Dict substitution type */
struct {
struct Jim_Obj *varNameObjPtr;
struct Jim_Obj *indexObjPtr;
} dictSubstValue;
struct {
int line;
int argc;
} scriptLineValue;
} internalRep;
/* These fields add 8 or 16 bytes more for every object
* but this is required for efficient garbage collection
* of Jim references. */
struct Jim_Obj *prevObjPtr; /* pointer to the prev object. */
struct Jim_Obj *nextObjPtr; /* pointer to the next object. */
} Jim_Obj;
/* Jim_Obj related macros */
#define Jim_IncrRefCount(objPtr) \
++(objPtr)->refCount
#define Jim_DecrRefCount(interp, objPtr) \
if (--(objPtr)->refCount <= 0) Jim_FreeObj(interp, objPtr)
#define Jim_IsShared(objPtr) \
((objPtr)->refCount > 1)
/* This macro is used when we allocate a new object using
* Jim_New...Obj(), but for some error we need to destroy it.
* Instead to use Jim_IncrRefCount() + Jim_DecrRefCount() we
* can just call Jim_FreeNewObj. To call Jim_Free directly
* seems too raw, the object handling may change and we want
* that Jim_FreeNewObj() can be called only against objects
* that are believed to have refcount == 0. */
#define Jim_FreeNewObj Jim_FreeObj
/* Free the internal representation of the object. */
#define Jim_FreeIntRep(i,o) \
if ((o)->typePtr && (o)->typePtr->freeIntRepProc) \
(o)->typePtr->freeIntRepProc(i, o)
/* Get the internal representation pointer */
#define Jim_GetIntRepPtr(o) (o)->internalRep.ptr
/* Set the internal representation pointer */
#define Jim_SetIntRepPtr(o, p) \
(o)->internalRep.ptr = (p)
/* The object type structure.
* There are three methods.
*
* - freeIntRepProc is used to free the internal representation of the object.
* Can be NULL if there is nothing to free.
*
* - dupIntRepProc is used to duplicate the internal representation of the object.
* If NULL, when an object is duplicated, the internalRep union is
* directly copied from an object to another.
* Note that it's up to the caller to free the old internal repr of the
* object before to call the Dup method.
*
* - updateStringProc is used to create the string from the internal repr.
*/
struct Jim_Interp;
typedef void (Jim_FreeInternalRepProc)(struct Jim_Interp *interp,
struct Jim_Obj *objPtr);
typedef void (Jim_DupInternalRepProc)(struct Jim_Interp *interp,
struct Jim_Obj *srcPtr, Jim_Obj *dupPtr);
typedef void (Jim_UpdateStringProc)(struct Jim_Obj *objPtr);
typedef struct Jim_ObjType {
const char *name; /* The name of the type. */
Jim_FreeInternalRepProc *freeIntRepProc;
Jim_DupInternalRepProc *dupIntRepProc;
Jim_UpdateStringProc *updateStringProc;
int flags;
} Jim_ObjType;
/* Jim_ObjType flags */
#define JIM_TYPE_NONE 0 /* No flags */
#define JIM_TYPE_REFERENCES 1 /* The object may contain references. */
/* -----------------------------------------------------------------------------
* Call frame, vars, commands structures
* ---------------------------------------------------------------------------*/
/* Call frame */
typedef struct Jim_CallFrame {
unsigned long id; /* Call Frame ID. Used for caching. */
int level; /* Level of this call frame. 0 = global */
struct Jim_HashTable vars; /* Where local vars are stored */
struct Jim_HashTable *staticVars; /* pointer to procedure static vars */
struct Jim_CallFrame *parent; /* The parent callframe */
Jim_Obj *const *argv; /* object vector of the current procedure call. */
int argc; /* number of args of the current procedure call. */
Jim_Obj *procArgsObjPtr; /* arglist object of the running procedure */
Jim_Obj *procBodyObjPtr; /* body object of the running procedure */
struct Jim_CallFrame *next; /* Callframes are in a linked list */
Jim_Obj *nsObj; /* Namespace for this proc call frame */
Jim_Obj *fileNameObj; /* file and line of caller of this proc (if available) */
int line;
Jim_Stack *localCommands; /* commands to be destroyed when the call frame is destroyed */
struct Jim_Obj *tailcallObj; /* Pending tailcall invocation */
struct Jim_Cmd *tailcallCmd; /* Resolved command for pending tailcall invocation */
} Jim_CallFrame;
/* The var structure. It just holds the pointer of the referenced
* object. If linkFramePtr is not NULL the variable is a link
* to a variable of name stored in objPtr living in the given callframe
* (this happens when the [global] or [upvar] command is used).
* The interp in order to always know how to free the Jim_Obj associated
* with a given variable because in Jim objects memory management is
* bound to interpreters. */
typedef struct Jim_Var {
Jim_Obj *objPtr;
struct Jim_CallFrame *linkFramePtr;
} Jim_Var;
/* The cmd structure. */
typedef int Jim_CmdProc(struct Jim_Interp *interp, int argc,
Jim_Obj *const *argv);
typedef void Jim_DelCmdProc(struct Jim_Interp *interp, void *privData);
/* The dict structure. It uses the same approach as Python OrderedDict
* of storing a hash table of table offsets into a table containing keys and objects.
* This preserves order when adding and replacing elements.
*/
typedef struct Jim_Dict {
struct JimDictHashEntry {
int offset;
unsigned hash;
} *ht; /* Allocated hash table of size 'size' */
unsigned int size; /* Size of the hash table (0 or power of two) */
unsigned int sizemask; /* mask to apply to hash to index into offsets table */
unsigned int uniq; /* unique value to add to hash generator */
Jim_Obj **table; /* Table of alternating key, value elements */
int len; /* Number of used elements in table */
int maxLen; /* Allocated length of table */
} Jim_Dict;
/* A command is implemented in C if isproc is 0, otherwise
* it is a Tcl procedure with the arglist and body represented by the
* two objects referenced by arglistObjPtr and bodyObjPtr. */
typedef struct Jim_Cmd {
int inUse; /* Reference count */
int isproc; /* Is this a procedure? */
struct Jim_Cmd *prevCmd; /* Previous command defn if cmd created 'local' */
union {
struct {
/* native (C) command */
Jim_CmdProc *cmdProc; /* The command implementation */
Jim_DelCmdProc *delProc; /* Called when the command is deleted if != NULL */
void *privData; /* command-private data available via Jim_CmdPrivData() */
} native;
struct {
/* Tcl procedure */
Jim_Obj *argListObjPtr;
Jim_Obj *bodyObjPtr;
Jim_HashTable *staticVars; /* Static vars hash table. NULL if no statics. */
int argListLen; /* Length of argListObjPtr */
int reqArity; /* Number of required parameters */
int optArity; /* Number of optional parameters */
int argsPos; /* Position of 'args', if specified, or -1 */
int upcall; /* True if proc is currently in upcall */
struct Jim_ProcArg {
Jim_Obj *nameObjPtr; /* Name of this arg */
Jim_Obj *defaultObjPtr; /* Default value, (or rename for $args) */
} *arglist;
Jim_Obj *nsObj; /* Namespace for this proc */
} proc;
} u;
} Jim_Cmd;
/* Pseudo Random Number Generator State structure */
typedef struct Jim_PrngState {
unsigned char sbox[256];
unsigned int i, j;
} Jim_PrngState;
/* -----------------------------------------------------------------------------
* Jim interpreter structure.
* Fields similar to the real Tcl interpreter structure have the same names.
* ---------------------------------------------------------------------------*/
typedef struct Jim_Interp {
Jim_Obj *result; /* object returned by the last command called. */
int errorLine; /* Error line where an error occurred. */
Jim_Obj *errorFileNameObj; /* Error file where an error occurred. */
int addStackTrace; /* > 0 if a level should be added to the stack trace */
int maxCallFrameDepth; /* Used for infinite loop detection. */
int maxEvalDepth; /* Used for infinite loop detection. */
int evalDepth; /* Current eval depth */
int returnCode; /* Completion code to return on JIM_RETURN. */
int returnLevel; /* Current level of 'return -level' */
int exitCode; /* Code to return to the OS on JIM_EXIT. */
long id; /* Hold unique id for various purposes */
int signal_level; /* A nesting level of catch -signal */
jim_wide sigmask; /* Bit mask of caught signals, or 0 if none */
int (*signal_set_result)(struct Jim_Interp *interp, jim_wide sigmask); /* Set a result for the sigmask */
Jim_CallFrame *framePtr; /* Pointer to the current call frame */
Jim_CallFrame *topFramePtr; /* toplevel/global frame pointer. */
struct Jim_HashTable commands; /* Commands hash table */
unsigned long procEpoch; /* Incremented every time the result
of procedures names lookup caching
may no longer be valid. */
unsigned long callFrameEpoch; /* Incremented every time a new
callframe is created. This id is used for the
'ID' field contained in the Jim_CallFrame
structure. */
int local; /* If 'local' is in effect, newly defined procs keep a reference to the old defn */
int quitting; /* Set to 1 during Jim_FreeInterp() */
int safeexpr; /* Set when evaluating a "safe" expression, no var subst or command eval */
Jim_Obj *liveList; /* Linked list of all the live objects. */
Jim_Obj *freeList; /* Linked list of all the unused objects. */
Jim_Obj *currentScriptObj; /* Script currently in execution. */
Jim_Obj *nullScriptObj; /* script representation of an empty string */
Jim_Obj *emptyObj; /* Shared empty string object. */
Jim_Obj *trueObj; /* Shared true int object. */
Jim_Obj *falseObj; /* Shared false int object. */
unsigned long referenceNextId; /* Next id for reference. */
struct Jim_HashTable references; /* References hash table. */
unsigned long lastCollectId; /* reference max Id of the last GC
execution. It's set to ~0 while the collection
is running as sentinel to avoid to recursive
calls via the [collect] command inside
finalizers. */
jim_wide lastCollectTime; /* unix time of the last GC execution */
Jim_Obj *stackTrace; /* Stack trace object. */
Jim_Obj *errorProc; /* Name of last procedure which returned an error */
Jim_Obj *unknown; /* Unknown command cache */
Jim_Obj *defer; /* "jim::defer" */
Jim_Obj *traceCmdObj; /* If non-null, execution trace command to invoke */
int unknown_called; /* The unknown command has been invoked */
int errorFlag; /* Set if an error occurred during execution. */
void *cmdPrivData; /* Used to pass the private data pointer to
a command. It is set to what the user specified
via Jim_CreateCommand(). */
Jim_Cmd *oldCmdCache; /* commands that have been deleted, but may still be cached */
int oldCmdCacheSize; /* Number of delete commands */
struct Jim_CallFrame *freeFramesList; /* list of CallFrame structures. */
struct Jim_HashTable assocData; /* per-interp storage for use by packages */
Jim_PrngState *prngState; /* per interpreter Random Number Gen. state. */
struct Jim_HashTable packages; /* Provided packages hash table */
Jim_Stack *loadHandles; /* handles of loaded modules [load] */
} Jim_Interp;
/* Currently provided as macro that performs the increment.
* At some point may be a real function doing more work.
* The proc epoch is used in order to know when a command lookup
* cached can no longer considered valid. */
#define Jim_SetResultString(i,s,l) Jim_SetResult(i, Jim_NewStringObj(i,s,l))
#define Jim_SetResultInt(i,intval) Jim_SetResult(i, Jim_NewIntObj(i,intval))
/* Note: Using trueObj and falseObj here makes some things slower...*/
#define Jim_SetResultBool(i,b) Jim_SetResultInt(i, b)
#define Jim_SetEmptyResult(i) Jim_SetResult(i, (i)->emptyObj)
#define Jim_GetResult(i) ((i)->result)
#define Jim_CmdPrivData(i) ((i)->cmdPrivData)
/* Note that 'o' is expanded only one time inside this macro,
* so it's safe to use side effects. */
#define Jim_SetResult(i,o) do { \
Jim_Obj *_resultObjPtr_ = (o); \
Jim_IncrRefCount(_resultObjPtr_); \
Jim_DecrRefCount(i,(i)->result); \
(i)->result = _resultObjPtr_; \
} while(0)
/* Use this for filehandles, etc. which need a unique id */
#define Jim_GetId(i) (++(i)->id)
/* Reference structure. The interpreter pointer is held within privdata member in HashTable */
#define JIM_REFERENCE_TAGLEN 7 /* The tag is fixed-length, because the reference
string representation must be fixed length. */
typedef struct Jim_Reference {
Jim_Obj *objPtr;
Jim_Obj *finalizerCmdNamePtr;
char tag[JIM_REFERENCE_TAGLEN+1];
} Jim_Reference;
/* -----------------------------------------------------------------------------
* Exported API prototypes.
* ---------------------------------------------------------------------------*/
#define Jim_NewEmptyStringObj(i) Jim_NewStringObj(i, "", 0)
#define Jim_FreeHashTableIterator(iter) Jim_Free(iter)
#define JIM_EXPORT
/* Memory allocation */
JIM_EXPORT void *Jim_Alloc (int size);
JIM_EXPORT void *Jim_Realloc(void *ptr, int size);
JIM_EXPORT void Jim_Free (void *ptr);
JIM_EXPORT char * Jim_StrDup (const char *s);
JIM_EXPORT char *Jim_StrDupLen(const char *s, int l);
/* environment */
JIM_EXPORT char **Jim_GetEnviron(void);
JIM_EXPORT void Jim_SetEnviron(char **env);
JIM_EXPORT int Jim_MakeTempFile(Jim_Interp *interp, const char *filename_template, int unlink_file);
/* evaluation */
JIM_EXPORT int Jim_Eval(Jim_Interp *interp, const char *script);
/* in C code, you can do this and get better error messages */
/* Jim_EvalSource( interp, __FILE__, __LINE__ , "some tcl commands"); */
JIM_EXPORT int Jim_EvalSource(Jim_Interp *interp, const char *filename, int lineno, const char *script);
/* Backwards compatibility */
#define Jim_Eval_Named(I, S, F, L) Jim_EvalSource((I), (F), (L), (S))
JIM_EXPORT int Jim_EvalGlobal(Jim_Interp *interp, const char *script);
JIM_EXPORT int Jim_EvalFile(Jim_Interp *interp, const char *filename);
JIM_EXPORT int Jim_EvalFileGlobal(Jim_Interp *interp, const char *filename);
JIM_EXPORT int Jim_EvalObj (Jim_Interp *interp, Jim_Obj *scriptObjPtr);
JIM_EXPORT int Jim_EvalObjVector (Jim_Interp *interp, int objc,
Jim_Obj *const *objv);
JIM_EXPORT int Jim_EvalObjList(Jim_Interp *interp, Jim_Obj *listObj);
JIM_EXPORT int Jim_EvalObjPrefix(Jim_Interp *interp, Jim_Obj *prefix,
int objc, Jim_Obj *const *objv);
#define Jim_EvalPrefix(i, p, oc, ov) Jim_EvalObjPrefix((i), Jim_NewStringObj((i), (p), -1), (oc), (ov))
JIM_EXPORT int Jim_EvalNamespace(Jim_Interp *interp, Jim_Obj *scriptObj, Jim_Obj *nsObj);
JIM_EXPORT int Jim_SubstObj (Jim_Interp *interp, Jim_Obj *substObjPtr,
Jim_Obj **resObjPtrPtr, int flags);
/* stack */
JIM_EXPORT void Jim_InitStack(Jim_Stack *stack);
JIM_EXPORT void Jim_FreeStack(Jim_Stack *stack);
JIM_EXPORT int Jim_StackLen(Jim_Stack *stack);
JIM_EXPORT void Jim_StackPush(Jim_Stack *stack, void *element);
JIM_EXPORT void * Jim_StackPop(Jim_Stack *stack);
JIM_EXPORT void * Jim_StackPeek(Jim_Stack *stack);
JIM_EXPORT void Jim_FreeStackElements(Jim_Stack *stack, void (*freeFunc)(void *ptr));
/* hash table */
JIM_EXPORT int Jim_InitHashTable (Jim_HashTable *ht,
const Jim_HashTableType *type, void *privdata);
JIM_EXPORT void Jim_ExpandHashTable (Jim_HashTable *ht,
unsigned int size);
JIM_EXPORT int Jim_AddHashEntry (Jim_HashTable *ht, const void *key,
void *val);
JIM_EXPORT int Jim_ReplaceHashEntry (Jim_HashTable *ht,
const void *key, void *val);
JIM_EXPORT int Jim_DeleteHashEntry (Jim_HashTable *ht,
const void *key);
JIM_EXPORT int Jim_FreeHashTable (Jim_HashTable *ht);
JIM_EXPORT Jim_HashEntry * Jim_FindHashEntry (Jim_HashTable *ht,
const void *key);
JIM_EXPORT Jim_HashTableIterator *Jim_GetHashTableIterator
(Jim_HashTable *ht);
JIM_EXPORT Jim_HashEntry * Jim_NextHashEntry
(Jim_HashTableIterator *iter);
/* objects */
JIM_EXPORT Jim_Obj * Jim_NewObj (Jim_Interp *interp);
JIM_EXPORT void Jim_FreeObj (Jim_Interp *interp, Jim_Obj *objPtr);
JIM_EXPORT void Jim_InvalidateStringRep (Jim_Obj *objPtr);
JIM_EXPORT Jim_Obj * Jim_DuplicateObj (Jim_Interp *interp,
Jim_Obj *objPtr);
JIM_EXPORT const char * Jim_GetString(Jim_Obj *objPtr,
int *lenPtr);
JIM_EXPORT const char *Jim_String(Jim_Obj *objPtr);
JIM_EXPORT int Jim_Length(Jim_Obj *objPtr);
/* string object */
JIM_EXPORT Jim_Obj * Jim_NewStringObj (Jim_Interp *interp,
const char *s, int len);
JIM_EXPORT Jim_Obj *Jim_NewStringObjUtf8(Jim_Interp *interp,
const char *s, int charlen);
JIM_EXPORT Jim_Obj * Jim_NewStringObjNoAlloc (Jim_Interp *interp,
char *s, int len);
JIM_EXPORT void Jim_AppendString (Jim_Interp *interp, Jim_Obj *objPtr,
const char *str, int len);
JIM_EXPORT void Jim_AppendObj (Jim_Interp *interp, Jim_Obj *objPtr,
Jim_Obj *appendObjPtr);
JIM_EXPORT void Jim_AppendStrings (Jim_Interp *interp,
Jim_Obj *objPtr, ...);
JIM_EXPORT int Jim_StringEqObj(Jim_Obj *aObjPtr, Jim_Obj *bObjPtr);
JIM_EXPORT int Jim_StringMatchObj (Jim_Interp *interp, Jim_Obj *patternObjPtr,
Jim_Obj *objPtr, int nocase);
JIM_EXPORT Jim_Obj * Jim_StringRangeObj (Jim_Interp *interp,
Jim_Obj *strObjPtr, Jim_Obj *firstObjPtr,
Jim_Obj *lastObjPtr);
JIM_EXPORT Jim_Obj * Jim_FormatString (Jim_Interp *interp,
Jim_Obj *fmtObjPtr, int objc, Jim_Obj *const *objv);
JIM_EXPORT Jim_Obj * Jim_ScanString (Jim_Interp *interp, Jim_Obj *strObjPtr,
Jim_Obj *fmtObjPtr, int flags);
JIM_EXPORT int Jim_CompareStringImmediate (Jim_Interp *interp,
Jim_Obj *objPtr, const char *str);
JIM_EXPORT int Jim_StringCompareObj(Jim_Interp *interp, Jim_Obj *firstObjPtr,
Jim_Obj *secondObjPtr, int nocase);
JIM_EXPORT int Jim_Utf8Length(Jim_Interp *interp, Jim_Obj *objPtr);
/* reference object */
JIM_EXPORT Jim_Obj * Jim_NewReference (Jim_Interp *interp,
Jim_Obj *objPtr, Jim_Obj *tagPtr, Jim_Obj *cmdNamePtr);
JIM_EXPORT Jim_Reference * Jim_GetReference (Jim_Interp *interp,
Jim_Obj *objPtr);
JIM_EXPORT int Jim_SetFinalizer (Jim_Interp *interp, Jim_Obj *objPtr, Jim_Obj *cmdNamePtr);
JIM_EXPORT int Jim_GetFinalizer (Jim_Interp *interp, Jim_Obj *objPtr, Jim_Obj **cmdNamePtrPtr);
/* interpreter */
JIM_EXPORT Jim_Interp * Jim_CreateInterp (void);
JIM_EXPORT void Jim_FreeInterp (Jim_Interp *i);
JIM_EXPORT int Jim_GetExitCode (Jim_Interp *interp);
JIM_EXPORT const char *Jim_ReturnCode(int code);
JIM_EXPORT void Jim_SetResultFormatted(Jim_Interp *interp, const char *format, ...);
/* commands */
JIM_EXPORT void Jim_RegisterCoreCommands (Jim_Interp *interp);
JIM_EXPORT int Jim_CreateCommand (Jim_Interp *interp,
const char *cmdName, Jim_CmdProc *cmdProc, void *privData,
Jim_DelCmdProc *delProc);
JIM_EXPORT int Jim_DeleteCommand (Jim_Interp *interp,
Jim_Obj *cmdNameObj);
JIM_EXPORT int Jim_RenameCommand (Jim_Interp *interp,
Jim_Obj *oldNameObj, Jim_Obj *newNameObj);
JIM_EXPORT Jim_Cmd * Jim_GetCommand (Jim_Interp *interp,
Jim_Obj *objPtr, int flags);
JIM_EXPORT int Jim_SetVariable (Jim_Interp *interp,
Jim_Obj *nameObjPtr, Jim_Obj *valObjPtr);
JIM_EXPORT int Jim_SetVariableStr (Jim_Interp *interp,
const char *name, Jim_Obj *objPtr);
JIM_EXPORT int Jim_SetGlobalVariableStr (Jim_Interp *interp,
const char *name, Jim_Obj *objPtr);
JIM_EXPORT int Jim_SetVariableStrWithStr (Jim_Interp *interp,
const char *name, const char *val);
JIM_EXPORT int Jim_SetVariableLink (Jim_Interp *interp,
Jim_Obj *nameObjPtr, Jim_Obj *targetNameObjPtr,
Jim_CallFrame *targetCallFrame);
JIM_EXPORT Jim_Obj * Jim_MakeGlobalNamespaceName(Jim_Interp *interp,
Jim_Obj *nameObjPtr);
JIM_EXPORT Jim_Obj * Jim_GetVariable (Jim_Interp *interp,
Jim_Obj *nameObjPtr, int flags);
JIM_EXPORT Jim_Obj * Jim_GetGlobalVariable (Jim_Interp *interp,
Jim_Obj *nameObjPtr, int flags);
JIM_EXPORT Jim_Obj * Jim_GetVariableStr (Jim_Interp *interp,
const char *name, int flags);
JIM_EXPORT Jim_Obj * Jim_GetGlobalVariableStr (Jim_Interp *interp,
const char *name, int flags);
JIM_EXPORT int Jim_UnsetVariable (Jim_Interp *interp,
Jim_Obj *nameObjPtr, int flags);
/* call frame */
JIM_EXPORT Jim_CallFrame *Jim_GetCallFrameByLevel(Jim_Interp *interp,
Jim_Obj *levelObjPtr);
/* garbage collection */
JIM_EXPORT int Jim_Collect (Jim_Interp *interp);
JIM_EXPORT void Jim_CollectIfNeeded (Jim_Interp *interp);
/* index object */
JIM_EXPORT int Jim_GetIndex (Jim_Interp *interp, Jim_Obj *objPtr,
int *indexPtr);
/* list object */
JIM_EXPORT Jim_Obj * Jim_NewListObj (Jim_Interp *interp,
Jim_Obj *const *elements, int len);
JIM_EXPORT void Jim_ListInsertElements (Jim_Interp *interp,
Jim_Obj *listPtr, int listindex, int objc, Jim_Obj *const *objVec);
JIM_EXPORT void Jim_ListAppendElement (Jim_Interp *interp,
Jim_Obj *listPtr, Jim_Obj *objPtr);
JIM_EXPORT void Jim_ListAppendList (Jim_Interp *interp,
Jim_Obj *listPtr, Jim_Obj *appendListPtr);
JIM_EXPORT int Jim_ListLength (Jim_Interp *interp, Jim_Obj *objPtr);
JIM_EXPORT int Jim_ListIndex (Jim_Interp *interp, Jim_Obj *listPrt,
int listindex, Jim_Obj **objPtrPtr, int seterr);
JIM_EXPORT Jim_Obj *Jim_ListGetIndex(Jim_Interp *interp, Jim_Obj *listPtr, int idx);
JIM_EXPORT int Jim_SetListIndex (Jim_Interp *interp,
Jim_Obj *varNamePtr, Jim_Obj *const *indexv, int indexc,
Jim_Obj *newObjPtr);
JIM_EXPORT Jim_Obj * Jim_ConcatObj (Jim_Interp *interp, int objc,
Jim_Obj *const *objv);
JIM_EXPORT Jim_Obj *Jim_ListJoin(Jim_Interp *interp,
Jim_Obj *listObjPtr, const char *joinStr, int joinStrLen);
/* dict object */
JIM_EXPORT Jim_Obj * Jim_NewDictObj (Jim_Interp *interp,
Jim_Obj *const *elements, int len);
JIM_EXPORT int Jim_DictKey (Jim_Interp *interp, Jim_Obj *dictPtr,
Jim_Obj *keyPtr, Jim_Obj **objPtrPtr, int flags);
JIM_EXPORT int Jim_DictKeysVector (Jim_Interp *interp,
Jim_Obj *dictPtr, Jim_Obj *const *keyv, int keyc,
Jim_Obj **objPtrPtr, int flags);
JIM_EXPORT int Jim_SetDictKeysVector (Jim_Interp *interp,
Jim_Obj *varNamePtr, Jim_Obj *const *keyv, int keyc,
Jim_Obj *newObjPtr, int flags);
JIM_EXPORT Jim_Obj **Jim_DictPairs(Jim_Interp *interp,
Jim_Obj *dictPtr, int *len);
JIM_EXPORT int Jim_DictAddElement(Jim_Interp *interp, Jim_Obj *objPtr,
Jim_Obj *keyObjPtr, Jim_Obj *valueObjPtr);
#define JIM_DICTMATCH_KEYS 0x0001
#define JIM_DICTMATCH_VALUES 0x002
JIM_EXPORT int Jim_DictMatchTypes(Jim_Interp *interp, Jim_Obj *objPtr, Jim_Obj *patternObj, int match_type, int return_types);
JIM_EXPORT int Jim_DictSize(Jim_Interp *interp, Jim_Obj *objPtr);
JIM_EXPORT int Jim_DictInfo(Jim_Interp *interp, Jim_Obj *objPtr);
JIM_EXPORT Jim_Obj *Jim_DictMerge(Jim_Interp *interp, int objc, Jim_Obj *const *objv);
/* return code object */
JIM_EXPORT int Jim_GetReturnCode (Jim_Interp *interp, Jim_Obj *objPtr,
int *intPtr);
/* expression object */
JIM_EXPORT int Jim_EvalExpression (Jim_Interp *interp,
Jim_Obj *exprObjPtr);
JIM_EXPORT int Jim_GetBoolFromExpr (Jim_Interp *interp,
Jim_Obj *exprObjPtr, int *boolPtr);
/* boolean object */
JIM_EXPORT int Jim_GetBoolean(Jim_Interp *interp, Jim_Obj *objPtr,
int *booleanPtr);
/* integer object */
JIM_EXPORT int Jim_GetWide (Jim_Interp *interp, Jim_Obj *objPtr,
jim_wide *widePtr);
JIM_EXPORT int Jim_GetWideExpr(Jim_Interp *interp, Jim_Obj *objPtr,
jim_wide *widePtr);
JIM_EXPORT int Jim_GetLong (Jim_Interp *interp, Jim_Obj *objPtr,
long *longPtr);
#define Jim_NewWideObj Jim_NewIntObj
JIM_EXPORT Jim_Obj * Jim_NewIntObj (Jim_Interp *interp,
jim_wide wideValue);
/* double object */
JIM_EXPORT int Jim_GetDouble(Jim_Interp *interp, Jim_Obj *objPtr,
double *doublePtr);
JIM_EXPORT void Jim_SetDouble(Jim_Interp *interp, Jim_Obj *objPtr,
double doubleValue);
JIM_EXPORT Jim_Obj * Jim_NewDoubleObj(Jim_Interp *interp, double doubleValue);
/* commands utilities */
JIM_EXPORT void Jim_WrongNumArgs (Jim_Interp *interp, int argc,
Jim_Obj *const *argv, const char *msg);
JIM_EXPORT int Jim_GetEnum (Jim_Interp *interp, Jim_Obj *objPtr,
const char * const *tablePtr, int *indexPtr, const char *name, int flags);
JIM_EXPORT int Jim_CheckShowCommands(Jim_Interp *interp, Jim_Obj *objPtr,
const char *const *tablePtr);
JIM_EXPORT int Jim_ScriptIsComplete(Jim_Interp *interp,
Jim_Obj *scriptObj, char *stateCharPtr);
/**
* Find a matching name in the array of the given length.
*
* NULL entries are ignored.
*
* Returns the matching index if found, or -1 if not.
*/
JIM_EXPORT int Jim_FindByName(const char *name, const char * const array[], size_t len);
/* package utilities */
typedef void (Jim_InterpDeleteProc)(Jim_Interp *interp, void *data);
JIM_EXPORT void * Jim_GetAssocData(Jim_Interp *interp, const char *key);
JIM_EXPORT int Jim_SetAssocData(Jim_Interp *interp, const char *key,
Jim_InterpDeleteProc *delProc, void *data);
JIM_EXPORT int Jim_DeleteAssocData(Jim_Interp *interp, const char *key);
JIM_EXPORT int Jim_CheckAbiVersion(Jim_Interp *interp, int abi_version);
/* Packages C API */
/* jim-package.c */
JIM_EXPORT int Jim_PackageProvide (Jim_Interp *interp,
const char *name, const char *ver, int flags);
JIM_EXPORT int Jim_PackageRequire (Jim_Interp *interp,
const char *name, int flags);
#define Jim_PackageProvideCheck(INTERP, NAME) \
if (Jim_CheckAbiVersion(INTERP, JIM_ABI_VERSION) == JIM_ERR || Jim_PackageProvide(INTERP, NAME, "1.0", JIM_ERRMSG)) \
return JIM_ERR
/* error messages */
JIM_EXPORT void Jim_MakeErrorMessage (Jim_Interp *interp);
/* interactive mode */
JIM_EXPORT int Jim_InteractivePrompt (Jim_Interp *interp);
JIM_EXPORT void Jim_HistoryLoad(const char *filename);
JIM_EXPORT void Jim_HistorySave(const char *filename);
JIM_EXPORT char *Jim_HistoryGetline(Jim_Interp *interp, const char *prompt);
JIM_EXPORT void Jim_HistorySetCompletion(Jim_Interp *interp, Jim_Obj *commandObj);
JIM_EXPORT void Jim_HistoryAdd(const char *line);
JIM_EXPORT void Jim_HistoryShow(void);
JIM_EXPORT void Jim_HistorySetMaxLen(int length);
JIM_EXPORT int Jim_HistoryGetMaxLen(void);
/* Misc */
JIM_EXPORT int Jim_InitStaticExtensions(Jim_Interp *interp);
JIM_EXPORT int Jim_StringToWide(const char *str, jim_wide *widePtr, int base);
JIM_EXPORT int Jim_IsBigEndian(void);
/**
* Returns 1 if a signal has been received while
* in a catch -signal {} clause.
*/
#define Jim_CheckSignal(i) ((i)->signal_level && (i)->sigmask)
/* jim-load.c */
JIM_EXPORT int Jim_LoadLibrary(Jim_Interp *interp, const char *pathName);
JIM_EXPORT void Jim_FreeLoadHandles(Jim_Interp *interp);
/* jim-aio.c */
JIM_EXPORT FILE *Jim_AioFilehandle(Jim_Interp *interp, Jim_Obj *command);
/* type inspection - avoid where possible */
JIM_EXPORT int Jim_IsDict(Jim_Obj *objPtr);
JIM_EXPORT int Jim_IsList(Jim_Obj *objPtr);
#ifdef __cplusplus
}
#endif
#endif /* __JIM__H */
/*
* Local Variables: ***
* c-basic-offset: 4 ***
* tab-width: 4 ***
* End: ***
*/
Reference in New Issue View Git Blame Copy Permalink