Embedded_Projects/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

serial: bcm6345: switch to raw I/O functions

Browse Source 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This commit is contained in:
Álvaro Fernández Rojas 2018-12-01 18:42:07 +01:00 committed by Tom Rini
parent 2aadff0feb
commit 09ace9161b
1 changed files with 49 additions and 50 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

99
drivers/serial/serial_bcm6345.c
View File

@ -89,26 +89,26 @@ struct bcm6345_serial_priv {
/* enable rx & tx operation on uart */
static void bcm6345_serial_enable(void __iomem *base)
{
setbits_be32(base + UART_CTL_REG, UART_CTL_BRGEN_MASK |
UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK);
setbits_32(base + UART_CTL_REG, UART_CTL_BRGEN_MASK |
UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK);
}
/* disable rx & tx operation on uart */
static void bcm6345_serial_disable(void __iomem *base)
{
clrbits_be32(base + UART_CTL_REG, UART_CTL_BRGEN_MASK |
UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK);
clrbits_32(base + UART_CTL_REG, UART_CTL_BRGEN_MASK |
UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK);
}
/* clear all unread data in rx fifo and unsent data in tx fifo */
static void bcm6345_serial_flush(void __iomem *base)
{
/* empty rx and tx fifo */
setbits_be32(base + UART_CTL_REG, UART_CTL_RSTRXFIFO_MASK |
UART_CTL_RSTTXFIFO_MASK);
setbits_32(base + UART_CTL_REG, UART_CTL_RSTRXFIFO_MASK |
UART_CTL_RSTTXFIFO_MASK);
/* read any pending char to make sure all irq status are cleared */
readl_be(base + UART_FIFO_REG);
readl(base + UART_FIFO_REG);
}
static int bcm6345_serial_init(void __iomem *base, ulong clk, u32 baudrate)
@ -120,40 +120,40 @@ static int bcm6345_serial_init(void __iomem *base, ulong clk, u32 baudrate)
bcm6345_serial_flush(base);
/* set uart control config */
clrsetbits_be32(base + UART_CTL_REG,
/* clear rx timeout */
UART_CTL_RXTIMEOUT_MASK |
/* clear stop bits */
UART_CTL_STOPBITS_MASK |
/* clear bits per symbol */
UART_CTL_BITSPERSYM_MASK |
/* clear xmit break */
UART_CTL_XMITBRK_MASK |
/* clear reserved bit */
UART_CTL_RSVD_MASK |
/* disable parity */
UART_CTL_RXPAREN_MASK |
UART_CTL_TXPAREN_MASK |
/* disable loopback */
UART_CTL_LOOPBACK_MASK,
/* set timeout to 5 */
UART_CTL_RXTIMEOUT_5 |
/* set 8 bits/symbol */
UART_CTL_BITSPERSYM_8 |
/* set 1 stop bit */
UART_CTL_STOPBITS_1 |
/* set parity to even */
UART_CTL_RXPAREVEN_MASK |
UART_CTL_TXPAREVEN_MASK);
clrsetbits_32(base + UART_CTL_REG,
/* clear rx timeout */
UART_CTL_RXTIMEOUT_MASK |
/* clear stop bits */
UART_CTL_STOPBITS_MASK |
/* clear bits per symbol */
UART_CTL_BITSPERSYM_MASK |
/* clear xmit break */
UART_CTL_XMITBRK_MASK |
/* clear reserved bit */
UART_CTL_RSVD_MASK |
/* disable parity */
UART_CTL_RXPAREN_MASK |
UART_CTL_TXPAREN_MASK |
/* disable loopback */
UART_CTL_LOOPBACK_MASK,
/* set timeout to 5 */
UART_CTL_RXTIMEOUT_5 |
/* set 8 bits/symbol */
UART_CTL_BITSPERSYM_8 |
/* set 1 stop bit */
UART_CTL_STOPBITS_1 |
/* set parity to even */
UART_CTL_RXPAREVEN_MASK |
UART_CTL_TXPAREVEN_MASK);
/* set uart fifo config */
clrsetbits_be32(base + UART_FIFO_CFG_REG,
/* clear fifo config */
UART_FIFO_CFG_RX_MASK |
UART_FIFO_CFG_TX_MASK,
/* set fifo config to 4 */
UART_FIFO_CFG_RX_4 |
UART_FIFO_CFG_TX_4);
clrsetbits_32(base + UART_FIFO_CFG_REG,
/* clear fifo config */
UART_FIFO_CFG_RX_MASK |
UART_FIFO_CFG_TX_MASK,
/* set fifo config to 4 */
UART_FIFO_CFG_RX_4 |
UART_FIFO_CFG_TX_4);
/* set baud rate */
val = ((clk / baudrate) >> 4);
@ -161,10 +161,10 @@ static int bcm6345_serial_init(void __iomem *base, ulong clk, u32 baudrate)
val = (val >> 1);
else
val = (val >> 1) - 1;
writel_be(val, base + UART_BAUD_REG);
writel(val, base + UART_BAUD_REG);
/* clear interrupts */
writel_be(0, base + UART_IR_REG);
writel(0, base + UART_IR_REG);
/* enable uart */
bcm6345_serial_enable(base);
@ -175,7 +175,7 @@ static int bcm6345_serial_init(void __iomem *base, ulong clk, u32 baudrate)
static int bcm6345_serial_pending(struct udevice *dev, bool input)
{
struct bcm6345_serial_priv *priv = dev_get_priv(dev);
u32 val = readl_be(priv->base + UART_IR_REG);
u32 val = readl(priv->base + UART_IR_REG);
if (input)
return !!(val & UART_IR_STAT(UART_IR_RXNOTEMPTY));
@ -195,11 +195,11 @@ static int bcm6345_serial_putc(struct udevice *dev, const char ch)
struct bcm6345_serial_priv *priv = dev_get_priv(dev);
u32 val;
val = readl_be(priv->base + UART_IR_REG);
val = readl(priv->base + UART_IR_REG);
if (!(val & UART_IR_STAT(UART_IR_TXEMPTY)))
return -EAGAIN;
writel_be(ch, priv->base + UART_FIFO_REG);
writel(ch, priv->base + UART_FIFO_REG);
return 0;
}
@ -209,14 +209,13 @@ static int bcm6345_serial_getc(struct udevice *dev)
struct bcm6345_serial_priv *priv = dev_get_priv(dev);
u32 val;
val = readl_be(priv->base + UART_IR_REG);
val = readl(priv->base + UART_IR_REG);
if (val & UART_IR_STAT(UART_IR_RXOVER))
setbits_be32(priv->base + UART_CTL_REG,
UART_CTL_RSTRXFIFO_MASK);
setbits_32(priv->base + UART_CTL_REG, UART_CTL_RSTRXFIFO_MASK);
if (!(val & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
return -EAGAIN;
val = readl_be(priv->base + UART_FIFO_REG);
val = readl(priv->base + UART_FIFO_REG);
if (val & UART_FIFO_ANYERR_MASK)
return -EAGAIN;
@ -277,7 +276,7 @@ static inline void _debug_uart_init(void)
static inline void wait_xfered(void __iomem *base)
{
do {
u32 val = readl_be(base + UART_IR_REG);
u32 val = readl(base + UART_IR_REG);
if (val & UART_IR_STAT(UART_IR_TXEMPTY))
break;
} while (1);
@ -288,7 +287,7 @@ static inline void _debug_uart_putc(int ch)
void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE;
wait_xfered(base);
writel_be(ch, base + UART_FIFO_REG);
writel(ch, base + UART_FIFO_REG);
wait_xfered(base);
}