Embedded_Projects/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

nds32: Remove the architecture

Browse Source 
As removal of nds32 has been ack'd for the Linux kernel, remove support
here as well.

Cc: Rick Chen <rick@andestech.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Rick Chen <rick@andestech.com>
This commit is contained in:
Tom Rini 2022-04-06 09:21:25 -04:00
parent 8cfac237b9
commit 11232139e3
89 changed files with 15 additions and 5659 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
.azure-pipelines.yml
View File

@ -431,10 +431,10 @@ stages:
vmImage: $(ubuntu_vm)
strategy:
# Use almost the same target division in .travis.yml, only merged
# 4 small build jobs (arc/microblaze/nds32/xtensa) into one.
# 3 small build jobs (arc/microblaze/xtensa) into one.
matrix:
arc_microblaze_nds32_xtensa:
BUILDMAN: "arc microblaze nds32 xtensa"
arc_microblaze_xtensa:
BUILDMAN: "arc microblaze xtensa"
arm11_arm7_arm920t_arm946es:
BUILDMAN: "arm11 arm7 arm920t arm946es"
arm926ejs:

6
MAINTAINERS
View File

@ -1057,12 +1057,6 @@ S: Orphaned (Since 2018-07)
T: git https://source.denx.de/u-boot/custodians/u-boot-nand-flash.git
F: drivers/mtd/nand/raw/
NDS32
M: Rick Chen <rick@andestech.com>
S: Maintained
T: git https://source.denx.de/u-boot/custodians/u-boot-nds32.git
F: arch/nds32/
NETWORK
M: Joe Hershberger <joe.hershberger@ni.com>
M: Ramon Fried <rfried.dev@gmail.com>

22
README
View File

@ -134,7 +134,6 @@ Directory Hierarchy:
/m68k Files generic to m68k architecture
/microblaze Files generic to microblaze architecture
/mips Files generic to MIPS architecture
/nds32 Files generic to NDS32 architecture
/nios2 Files generic to Altera NIOS2 architecture
/powerpc Files generic to PowerPC architecture
/riscv Files generic to RISC-V architecture
@ -2689,8 +2688,8 @@ details; basically, the header defines the following image properties:
LynxOS, pSOS, QNX, RTEMS, INTEGRITY;
Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, INTEGRITY).
* Target CPU Architecture (Provisions for Alpha, ARM, Intel x86,
IA64, MIPS, NDS32, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
Currently supported: ARM, Intel x86, MIPS, NDS32, Nios II, PowerPC).
IA64, MIPS, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
Currently supported: ARM, Intel x86, MIPS, Nios II, PowerPC).
* Compression Type (uncompressed, gzip, bzip2)
* Load Address
* Entry Point
@ -3402,23 +3401,6 @@ On Nios II, the ABI is documented here:
Note: on Nios II, we give "-G0" option to gcc and don't use gp
to access small data sections, so gp is free.
On NDS32, the following registers are used:
R0-R1: argument/return
R2-R5: argument
R15: temporary register for assembler
R16: trampoline register
R28: frame pointer (FP)
R29: global pointer (GP)
R30: link register (LP)
R31: stack pointer (SP)
PC: program counter (PC)
==> U-Boot will use R10 to hold a pointer to the global data
NOTE: DECLARE_GLOBAL_DATA_PTR must be used with file-global scope,
or current versions of GCC may "optimize" the code too much.
On RISC-V, the following registers are used:
x0: hard-wired zero (zero)

11
arch/Kconfig
View File

@ -1,5 +1,5 @@
config ARCH_MAP_SYSMEM
depends on SANDBOX || NDS32
depends on SANDBOX
def_bool y
config CREATE_ARCH_SYMLINK
@ -87,10 +87,6 @@ config MIPS
select SUPPORT_OF_CONTROL
select SPL_SEPARATE_BSS if SPL
config NDS32
bool "NDS32 architecture"
select SUPPORT_OF_CONTROL
config NIOS2
bool "Nios II architecture"
select CPU
@ -382,7 +378,7 @@ config SYS_IMMR
config SKIP_LOWLEVEL_INIT
bool "Skip the calls to certain low level initialization functions"
depends on ARM || NDS32 || MIPS || RISCV
depends on ARM || MIPS || RISCV
help
If enabled, then certain low level initializations (like setting up
the memory controller) are omitted and/or U-Boot does not relocate
@ -393,7 +389,7 @@ config SKIP_LOWLEVEL_INIT
config SPL_SKIP_LOWLEVEL_INIT
bool "Skip the calls to certain low level initialization functions"
depends on SPL && (ARM || NDS32 || MIPS || RISCV)
depends on SPL && (ARM || MIPS || RISCV)
help
If enabled, then certain low level initializations (like setting up
the memory controller) are omitted and/or U-Boot does not relocate
@ -442,7 +438,6 @@ source "arch/arm/Kconfig"
source "arch/m68k/Kconfig"
source "arch/microblaze/Kconfig"
source "arch/mips/Kconfig"
source "arch/nds32/Kconfig"
source "arch/nios2/Kconfig"
source "arch/powerpc/Kconfig"
source "arch/sandbox/Kconfig"

46
arch/nds32/Kconfig
View File

@ -1,46 +0,0 @@
menu "NDS32 architecture"
depends on NDS32
config SYS_ARCH
default "nds32"
choice
prompt "Target select"
optional
config TARGET_ADP_AG101P
bool "Support adp-ag101p"
config TARGET_ADP_AE3XX
bool "Support adp-ae3xx"
endchoice
config SYS_ICACHE_OFF
bool "Do not enable icache"
help
Do not enable instruction cache in U-Boot.
config SPL_SYS_ICACHE_OFF
bool "Do not enable icache in SPL"
depends on SPL
default SYS_ICACHE_OFF
help
Do not enable instruction cache in SPL.
config SYS_DCACHE_OFF
bool "Do not enable dcache"
help
Do not enable data cache in U-Boot.
config SPL_SYS_DCACHE_OFF
bool "Do not enable dcache in SPL"
depends on SPL
default SYS_DCACHE_OFF
help
Do not enable data cache in SPL.
source "board/AndesTech/adp-ag101p/Kconfig"
source "board/AndesTech/adp-ae3xx/Kconfig"
endmenu

6
arch/nds32/Makefile
View File

@ -1,6 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
head-y := arch/nds32/cpu/$(CPU)/start.o
libs-y += arch/nds32/cpu/$(CPU)/
libs-y += arch/nds32/lib/

18
arch/nds32/config.mk
View File

@ -1,18 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2000-2002
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2011
# Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
#
CONFIG_STANDALONE_LOAD_ADDR = 0x300000
LDFLAGS_STANDALONE += -T $(srctree)/examples/standalone/nds32.lds
PLATFORM_RELFLAGS += -fno-common -mrelax -mno-ext-fpu-dp -mfloat-abi=soft
PLATFORM_RELFLAGS += -gdwarf-2
PLATFORM_CPPFLAGS += -D__nds32__ -ffixed-10 -fpie -mcmodel=large
LDFLAGS_u-boot = --gc-sections --relax -pie --mabi=AABI

13
arch/nds32/cpu/n1213/Makefile
View File

@ -1,13 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# Copyright (C) 2011 Andes Technology Corporation
# Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
extra-y = start.o
obj-$(if $(filter ag101,$(SOC)),y) += ag101/
obj-$(if $(filter ae3xx,$(SOC)),y) += ae3xx/

16
arch/nds32/cpu/n1213/ae3xx/Makefile
View File

@ -1,16 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2009
# Marvell Semiconductor <www.marvell.com>
# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
#
# Copyright (C) 2011 Andes Technology Corporation
# Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
obj-y := cpu.o timer.o
obj-y += lowlevel_init.o
ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
obj-y += watchdog.o
endif

46
arch/nds32/cpu/n1213/ae3xx/cpu.c
View File

@ -1,46 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
* Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
/* CPU specific code */
#include <common.h>
#include <command.h>
#include <cpu_func.h>
#include <irq_func.h>
#include <watchdog.h>
#include <asm/cache.h>
#include <faraday/ftwdt010_wdt.h>
/*
* cleanup_before_linux() is called just before we call linux
* it prepares the processor for linux
*
* we disable interrupt and caches.
*/
int cleanup_before_linux(void)
{
disable_interrupts();
/* turn off I/D-cache */
cache_flush();
icache_disable();
dcache_disable();
return 0;
}
int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
{
disable_interrupts();
panic("AE3XX wdt not support yet.\n");
}

147
arch/nds32/cpu/n1213/ae3xx/lowlevel_init.S
View File

@ -1,147 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
.pic
.text
#include <common.h>
#include <config.h>
#include <asm/macro.h>
#include <generated/asm-offsets.h>
/*
* parameters for the SDRAM controller
*/
#define SDMC_TP1_A (CONFIG_FTSDMC021_BASE + FTSDMC021_TP1)
#define SDMC_TP2_A (CONFIG_FTSDMC021_BASE + FTSDMC021_TP2)
#define SDMC_CR1_A (CONFIG_FTSDMC021_BASE + FTSDMC021_CR1)
#define SDMC_CR2_A (CONFIG_FTSDMC021_BASE + FTSDMC021_CR2)
#define SDMC_B0_BSR_A (CONFIG_FTSDMC021_BASE + FTSDMC021_BANK0_BSR)
#define SDMC_B1_BSR_A (CONFIG_FTSDMC021_BASE + FTSDMC021_BANK1_BSR)
#define SDMC_TP1_D CONFIG_SYS_FTSDMC021_TP1
#define SDMC_TP2_D CONFIG_SYS_FTSDMC021_TP2
#define SDMC_CR1_D CONFIG_SYS_FTSDMC021_CR1
#define SDMC_CR2_D CONFIG_SYS_FTSDMC021_CR2
#define SDMC_B0_BSR_D CONFIG_SYS_FTSDMC021_BANK0_BSR
#define SDMC_B1_BSR_D CONFIG_SYS_FTSDMC021_BANK1_BSR
/*
* for Orca and Emerald
*/
#define BOARD_ID_REG 0x104
#define BOARD_ID_FAMILY_MASK 0xfff000
#define BOARD_ID_FAMILY_V5 0x556000
#define BOARD_ID_FAMILY_K7 0x74b000
/*
* parameters for the static memory controller
*/
#define SMC_BANK0_CR_A (CONFIG_FTSMC020_BASE + FTSMC020_BANK0_CR)
#define SMC_BANK0_TPR_A (CONFIG_FTSMC020_BASE + FTSMC020_BANK0_TPR)
#define SMC_BANK0_CR_D FTSMC020_BANK0_LOWLV_CONFIG
#define SMC_BANK0_TPR_D FTSMC020_BANK0_LOWLV_TIMING
/*
* for Orca and Emerald
*/
#define AHBC_BSR4_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_SLAVE_BSR_4)
#define AHBC_BSR6_D CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6
/*
* parameters for the pmu controoler
*/
#define PMU_PDLLCR0_A (CONFIG_FTPMU010_BASE + FTPMU010_PDLLCR0)
/*
* numeric 7 segment display
*/
.macro led, num
write32 CONFIG_DEBUG_LED, \num
.endm
/*
* Waiting for SDRAM to set up
*/
.macro wait_sdram
li $r0, CONFIG_FTSDMC021_BASE
1:
lwi $r1, [$r0+FTSDMC021_CR2]
bnez $r1, 1b
.endm
.globl mem_init
mem_init:
move $r11, $lp
li $r0, SMC_BANK0_CR_A
lwi $r1, [$r0+#0x00]
ori $r1, $r1, 0x8f0
xori $r1, $r1, 0x8f0
/* 16-bit mode */
ori $r1, $r1, 0x60
li $r2, 0x00153153
swi $r1, [$r0+#0x00]
swi $r2, [$r0+#0x04]
move $lp, $r11
ret
#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
.globl lowlevel_init
lowlevel_init:
move $r10, $lp
jal remap
#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP))
jal enable_fpu
#endif
ret $r10
remap:
move $r11, $lp
relo_base:
mfusr $r0, $pc
#ifdef CONFIG_MEM_REMAP
li $r4, 0x00000000
li $r5, 0x80000000
la $r6, _end@GOTOFF
1:
lmw.bim $r12, [$r5], $r19
smw.bim $r12, [$r4], $r19
blt $r5, $r6, 1b
#endif /* #ifdef CONFIG_MEM_REMAP */
move $lp, $r11
2:
ret
/*
* enable_fpu:
* Some of Andes CPU version support FPU coprocessor, if so,
* and toolchain support FPU instruction set, we should enable it.
*/
#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP))
enable_fpu:
mfsr $r0, $CPU_VER /* enable FPU if it exists */
srli $r0, $r0, 3
andi $r0, $r0, 1
beqz $r0, 1f /* skip if no COP */
mfsr $r0, $FUCOP_EXIST
srli $r0, $r0, 31
beqz $r0, 1f /* skip if no FPU */
mfsr $r0, $FUCOP_CTL
ori $r0, $r0, 1
mtsr $r0, $FUCOP_CTL
1:
ret
#endif
#endif /* #if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */

15
arch/nds32/cpu/n1213/ae3xx/timer.c
View File

@ -1,15 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2009 Faraday Technology
* Po-Yu Chuang <ratbert@faraday-tech.com>
*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
#ifndef CONFIG_TIMER
#include <common.h>
#include <asm/io.h>
#include <faraday/fttmr010.h>
#error "AE3XX timer only support DM flow"
#endif /* CONFIG_TIMER */

16
arch/nds32/cpu/n1213/ae3xx/watchdog.S
View File

@ -1,16 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2011 Andes Technology Corporation
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
#include <asm/arch-ag101/ag101.h>
#include <linux/linkage.h>
.text
#ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
ENTRY(turnoff_watchdog)
#error "AE3XX not support wdt yet"
ENDPROC(turnoff_watchdog)
#endif

16
arch/nds32/cpu/n1213/ag101/Makefile
View File

@ -1,16 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2009
# Marvell Semiconductor <www.marvell.com>
# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
#
# Copyright (C) 2011 Andes Technology Corporation
# Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
obj-y := cpu.o timer.o
obj-y += lowlevel_init.o
ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
obj-y += watchdog.o
endif

63
arch/nds32/cpu/n1213/ag101/cpu.c
View File

@ -1,63 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
* Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
/* CPU specific code */
#include <common.h>
#include <command.h>
#include <cpu_func.h>
#include <irq_func.h>
#include <watchdog.h>
#include <asm/cache.h>
#include <faraday/ftwdt010_wdt.h>
/*
* cleanup_before_linux() is called just before we call linux
* it prepares the processor for linux
*
* we disable interrupt and caches.
*/
int cleanup_before_linux(void)
{
disable_interrupts();
/* turn off I/D-cache */
cache_flush();
icache_disable();
dcache_disable();
return 0;
}
int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
{
disable_interrupts();
/*
* reset to the base addr of andesboot.
* currently no ROM loader at addr 0.
* do not use reset_cpu();
*/
#ifdef CONFIG_FTWDT010_WATCHDOG
/*
* workaround: if we use CONFIG_HW_WATCHDOG with ftwdt010, will lead
* automatic hardware reset when booting Linux.
* Please do not use CONFIG_HW_WATCHDOG and WATCHDOG_RESET() here.
*/
ftwdt010_wdt_reset();
while (1)
;
#endif /* CONFIG_FTWDT010_WATCHDOG */
/*NOTREACHED*/
}

317
arch/nds32/cpu/n1213/ag101/lowlevel_init.S
View File

@ -1,317 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
.pic
.text
#include <common.h>
#include <config.h>
#include <asm/macro.h>
#include <generated/asm-offsets.h>
/*
* parameters for the SDRAM controller
*/
#define SDMC_TP1_A (CONFIG_FTSDMC021_BASE + FTSDMC021_TP1)
#define SDMC_TP2_A (CONFIG_FTSDMC021_BASE + FTSDMC021_TP2)
#define SDMC_CR1_A (CONFIG_FTSDMC021_BASE + FTSDMC021_CR1)
#define SDMC_CR2_A (CONFIG_FTSDMC021_BASE + FTSDMC021_CR2)
#define SDMC_B0_BSR_A (CONFIG_FTSDMC021_BASE + FTSDMC021_BANK0_BSR)
#define SDMC_B1_BSR_A (CONFIG_FTSDMC021_BASE + FTSDMC021_BANK1_BSR)
#define SDMC_TP1_D CONFIG_SYS_FTSDMC021_TP1
#define SDMC_TP2_D CONFIG_SYS_FTSDMC021_TP2
#define SDMC_CR1_D CONFIG_SYS_FTSDMC021_CR1
#define SDMC_CR2_D CONFIG_SYS_FTSDMC021_CR2
#define SDMC_B0_BSR_D CONFIG_SYS_FTSDMC021_BANK0_BSR
#define SDMC_B1_BSR_D CONFIG_SYS_FTSDMC021_BANK1_BSR
/*
* for Orca and Emerald
*/
#define BOARD_ID_REG 0x104
#define BOARD_ID_FAMILY_MASK 0xfff000
#define BOARD_ID_FAMILY_V5 0x556000
#define BOARD_ID_FAMILY_K7 0x74b000
/*
* parameters for the static memory controller
*/
#define SMC_BANK0_CR_A (CONFIG_FTSMC020_BASE + FTSMC020_BANK0_CR)
#define SMC_BANK0_TPR_A (CONFIG_FTSMC020_BASE + FTSMC020_BANK0_TPR)
#define SMC_BANK0_CR_D FTSMC020_BANK0_LOWLV_CONFIG
#define SMC_BANK0_TPR_D FTSMC020_BANK0_LOWLV_TIMING
/*
* parameters for the ahbc controller
*/
#define AHBC_CR_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_CR)
#define AHBC_BSR6_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_SLAVE_BSR_6)
/*
* for Orca and Emerald
*/
#define AHBC_BSR4_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_SLAVE_BSR_4)
#define AHBC_BSR6_D CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6
/*
* parameters for the pmu controoler
*/
#define PMU_PDLLCR0_A (CONFIG_FTPMU010_BASE + FTPMU010_PDLLCR0)
/*
* numeric 7 segment display
*/
.macro led, num
write32 CONFIG_DEBUG_LED, \num
.endm
/*
* Waiting for SDRAM to set up
*/
.macro wait_sdram
li $r0, CONFIG_FTSDMC021_BASE
1:
lwi $r1, [$r0+FTSDMC021_CR2]
bnez $r1, 1b
.endm
.globl mem_init
mem_init:
move $r11, $lp
/*
* mem_init:
* There are 2 bank connected to FTSMC020 on AG101
* BANK0: FLASH/ROM (SW5, J16), BANK1: OnBoard SDRAM.
* we need to set onboard SDRAM before remap and relocation.
*/
led 0x01
/*
* for Orca and Emerald
* disable write protection and reset bank size
*/
li $r0, SMC_BANK0_CR_A
lwi $r1, [$r0+#0x00]
ori $r1, $r1, 0x8f0
xori $r1, $r1, 0x8f0
/* check board */
li $r3, CONFIG_FTPMU010_BASE + BOARD_ID_REG
lwi $r3, [$r3]
li $r4, BOARD_ID_FAMILY_MASK
and $r3, $r3, $r4
li $r4, BOARD_ID_FAMILY_K7
xor $r4, $r3, $r4
beqz $r4, use_flash_16bit_boot
/* 32-bit mode */
use_flash_32bit_boot:
ori $r1, $r1, 0x50
li $r2, 0x00151151
j sdram_b0_cr
/* 16-bit mode */
use_flash_16bit_boot:
ori $r1, $r1, 0x60
li $r2, 0x00153153
/* SRAM bank0 config */
sdram_b0_cr:
swi $r1, [$r0+#0x00]
swi $r2, [$r0+#0x04]
/* config AHB Controller */
led 0x02
/*
* config PMU controller
*/
/* ftpmu010_dlldis_disable, must do it in lowleve_init */
led 0x03
setbf32 PMU_PDLLCR0_A, FTPMU010_PDLLCR0_DLLDIS ! 0x00010000
/*
* config SDRAM controller
*/
led 0x04
write32 SDMC_TP1_A, SDMC_TP1_D ! 0x00011312
led 0x05
write32 SDMC_TP2_A, SDMC_TP2_D ! 0x00480180
led 0x06
write32 SDMC_CR1_A, SDMC_CR1_D ! 0x00002326
led 0x07
write32 SDMC_CR2_A, FTSDMC021_CR2_IPREC ! 0x00000010
wait_sdram
led 0x08
write32 SDMC_CR2_A, FTSDMC021_CR2_ISMR ! 0x00000004
wait_sdram
led 0x09
write32 SDMC_CR2_A, FTSDMC021_CR2_IREF ! 0x00000008
wait_sdram
led 0x0a
move $lp, $r11
ret
#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
.globl lowlevel_init
lowlevel_init:
move $r10, $lp
led 0x10
jal remap
#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP))
led 0x1f
jal enable_fpu
#endif
led 0x20
ret $r10
remap:
move $r11, $lp
#ifdef __NDS32_N1213_43U1H__ /* NDS32 V0 ISA - AG101 Only */
bal 2f
relo_base:
move $r0, $lp
#else
relo_base:
mfusr $r0, $pc
#endif /* __NDS32_N1213_43U1H__ */
/* Remapping */
led 0x1a
write32 SDMC_B0_BSR_A, SDMC_B0_BSR_D ! 0x00001800
write32 SDMC_B1_BSR_A, SDMC_B1_BSR_D ! 0x00001880
/* clear empty BSR registers */
led 0x1b
li $r4, CONFIG_FTSDMC021_BASE
li $r5, 0x0
swi $r5, [$r4 + FTSDMC021_BANK2_BSR]
swi $r5, [$r4 + FTSDMC021_BANK3_BSR]
#ifdef CONFIG_MEM_REMAP
/*
* Copy ROM code to SDRAM base for memory remap layout.
* This is not the real relocation, the real relocation is the function
* relocate_code() is start.S which supports the systems is memory
* remapped or not.
*/
/*
* Doing memory remap is essential for preparing some non-OS or RTOS
* applications.
*
* This is also a must on ADP-AG101 board.
* The reason is because the ROM/FLASH circuit on PCB board.
* AG101-A0 board has 2 jumpers MA17 and SW5 to configure which
* ROM/FLASH is used to boot.
*
* When SW5 = "0101", MA17 = LO, the ROM is connected to BANK0,
* and the FLASH is connected to BANK1.
* When SW5 = "1010", MA17 = HI, the ROM is disabled (still at BANK0),
* and the FLASH is connected to BANK0.
* It will occur problem when doing flash probing if the flash is at
* BANK0 (0x00000000) while memory remapping was skipped.
*
* Other board like ADP-AG101P may not enable this since there is only
* a FLASH connected to bank0.
*/
led 0x11
/*
* for Orca and Emerald
* read sdram base address automatically
*/
li $r5, AHBC_BSR6_A
lwi $r8, [$r5]
li $r4, 0xfff00000 /* r4 = bank6 base */
and $r4, $r4, $r8
la $r5, _start@GOTOFF
la $r6, _end@GOTOFF
1:
lwi.p $r7, [$r5], #4
swi.p $r7, [$r4], #4
blt $r5, $r6, 1b
/* set remap bit */
/*
* MEM remap bit is operational
* - use it to map writeable memory at 0x00000000, in place of flash
* - before remap: flash/rom 0x00000000, sdram: 0x10000000-0x4fffffff
* - after remap: flash/rom 0x80000000, sdram: 0x00000000
*/
led 0x1c
write32 SDMC_B0_BSR_A, 0x00001000
write32 SDMC_B1_BSR_A, 0x00001200
li $r5, CONFIG_SYS_TEXT_BASE /* flash base address */
add $r11, $r11, $r5 /* add flash address offset for ret */
add $r10, $r10, $r5
move $lp, $r11
setbf15 AHBC_CR_A, FTAHBC020S_CR_REMAP ! 0x1
/*
* for Orca and Emerald
* extend sdram size from 256MB to 2GB
*/
li $r5, AHBC_BSR6_A
lwi $r6, [$r5]
li $r4, 0xfff0ffff
and $r6 ,$r4, $r6
li $r4, 0x000b0000
or $r6, $r4, $r6
swi $r6, [$r5]
/*
* for Orca and Emerald
* extend rom base from 256MB to 2GB
*/
li $r4, AHBC_BSR4_A
lwi $r5, [$r4]
li $r6, 0xffffff
and $r5, $r5, $r6
li $r6, 0x80000000
or $r5, $r5, $r6
swi $r5, [$r4]
#endif /* #ifdef CONFIG_MEM_REMAP */
move $lp, $r11
2:
ret
/*
* enable_fpu:
* Some of Andes CPU version support FPU coprocessor, if so,
* and toolchain support FPU instruction set, we should enable it.
*/
#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP))
enable_fpu:
mfsr $r0, $CPU_VER /* enable FPU if it exists */
srli $r0, $r0, 3
andi $r0, $r0, 1
beqz $r0, 1f /* skip if no COP */
mfsr $r0, $FUCOP_EXIST
srli $r0, $r0, 31
beqz $r0, 1f /* skip if no FPU */
mfsr $r0, $FUCOP_CTL
ori $r0, $r0, 1
mtsr $r0, $FUCOP_CTL
1:
ret
#endif
.globl show_led
show_led:
li $r8, (CONFIG_DEBUG_LED)
swi $r7, [$r8]
ret
#endif /* #if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */

197
arch/nds32/cpu/n1213/ag101/timer.c
View File

@ -1,197 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2009 Faraday Technology
* Po-Yu Chuang <ratbert@faraday-tech.com>
*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
#ifndef CONFIG_TIMER
#include <common.h>
#include <clock_legacy.h>
#include <init.h>
#include <irq_func.h>
#include <log.h>
#include <time.h>
#include <asm/io.h>
#include <faraday/fttmr010.h>
#include <linux/delay.h>
static ulong timestamp;
static ulong lastdec;
int timer_init(void)
{
struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
unsigned int cr;
debug("%s()\n", __func__);
/* disable timers */
writel(0, &tmr->cr);
#ifdef CONFIG_FTTMR010_EXT_CLK
/* use 32768Hz oscillator for RTC, WDT, TIMER */
ftpmu010_32768osc_enable();
#endif
/* setup timer */
writel(TIMER_LOAD_VAL, &tmr->timer3_load);
writel(TIMER_LOAD_VAL, &tmr->timer3_counter);
writel(0, &tmr->timer3_match1);
writel(0, &tmr->timer3_match2);
/* we don't want timer to issue interrupts */
writel(FTTMR010_TM3_MATCH1 |
FTTMR010_TM3_MATCH2 |
FTTMR010_TM3_OVERFLOW,
&tmr->interrupt_mask);
cr = readl(&tmr->cr);
#ifdef CONFIG_FTTMR010_EXT_CLK
cr |= FTTMR010_TM3_CLOCK; /* use external clock */
#endif
cr |= FTTMR010_TM3_ENABLE;
writel(cr, &tmr->cr);
/* init the timestamp and lastdec value */
reset_timer_masked();
return 0;
}
/*
* timer without interrupts
*/
/*
* reset time
*/
void reset_timer_masked(void)
{
struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
/* capure current decrementer value time */
#ifdef CONFIG_FTTMR010_EXT_CLK
lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
#else
lastdec = readl(&tmr->timer3_counter) /
(get_board_sys_clk() / 2 / CONFIG_SYS_HZ);
#endif
timestamp = 0; /* start "advancing" time stamp from 0 */
debug("%s(): lastdec = %lx\n", __func__, lastdec);
}
void reset_timer(void)
{
debug("%s()\n", __func__);
reset_timer_masked();
}
/*
* return timer ticks
*/
ulong get_timer_masked(void)
{
struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
/* current tick value */
#ifdef CONFIG_FTTMR010_EXT_CLK
ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
#else
ulong now = readl(&tmr->timer3_counter) /
(get_board_sys_clk() / 2 / CONFIG_SYS_HZ);
#endif
debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec);
if (lastdec >= now) {
/*
* normal mode (non roll)
* move stamp fordward with absoulte diff ticks
*/
timestamp += lastdec - now;
} else {
/*
* we have overflow of the count down timer
*
* nts = ts + ld + (TLV - now)
* ts=old stamp, ld=time that passed before passing through -1
* (TLV-now) amount of time after passing though -1
* nts = new "advancing time stamp"...it could also roll and
* cause problems.
*/
timestamp += lastdec + TIMER_LOAD_VAL - now;
}
lastdec = now;
debug("%s() returns %lx\n", __func__, timestamp);
return timestamp;
}
/*
* return difference between timer ticks and base
*/
ulong get_timer(ulong base)
{
debug("%s(%lx)\n", __func__, base);
return get_timer_masked() - base;
}
void set_timer(ulong t)
{
debug("%s(%lx)\n", __func__, t);
timestamp = t;
}
/* delay x useconds AND preserve advance timestamp value */
void __udelay(unsigned long usec)
{
struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
#ifdef CONFIG_FTTMR010_EXT_CLK
long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
#else
long tmo = usec * ((get_board_sys_clk() / 2) / 1000) / 1000;
#endif
unsigned long now, last = readl(&tmr->timer3_counter);
debug("%s(%lu)\n", __func__, usec);
while (tmo > 0) {
now = readl(&tmr->timer3_counter);
if (now > last) /* count down timer overflow */
tmo -= TIMER_LOAD_VAL + last - now;
else
tmo -= last - now;
last = now;
}
}
/*
* This function is derived from PowerPC code (read timebase as long long).
* On ARM it just returns the timer value.
*/
unsigned long long get_ticks(void)
{
debug("%s()\n", __func__);
return get_timer(0);
}
/*
* This function is derived from PowerPC code (timebase clock frequency).
* On ARM it returns the number of timer ticks per second.
*/
ulong get_tbclk(void)
{
debug("%s()\n", __func__);
#ifdef CONFIG_FTTMR010_EXT_CLK
return CONFIG_SYS_HZ;
#else
return get_board_sys_clk();
#endif
}
#endif /* CONFIG_TIMER */

32
arch/nds32/cpu/n1213/ag101/watchdog.S
View File

@ -1,32 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2011 Andes Technology Corporation
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
#include <asm/arch-ag101/ag101.h>
#include <linux/linkage.h>
.text
#ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
ENTRY(turnoff_watchdog)
#define WD_CR 0xC
#define WD_ENABLE 0x1
! Turn off the watchdog, according to Faraday FTWDT010 spec
li $p0, (CONFIG_FTWDT010_BASE+WD_CR) ! Get the addr of WD CR
lwi $p1, [$p0] ! Get the config of WD
andi $p1, $p1, 0x1f ! Wipe out useless bits
li $r0, ~WD_ENABLE
and $p1, $p1, $r0 ! Set WD disable
sw $p1, [$p0] ! Write back to WD CR
! Disable Interrupts by clear GIE in $PSW reg
setgie.d
ret
ENDPROC(turnoff_watchdog)
#endif

502
arch/nds32/cpu/n1213/start.S
View File

@ -1,502 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Andesboot - Startup Code for Whitiger core
*
* Copyright (C) 2006 Andes Technology Corporation
* Copyright (C) 2006 Shawn Lin <nobuhiro@andestech.com>
* Copyright (C) 2011 Macpaul Lin <macpaul@andestech.com>
* Greentime Hu <greentime@andestech.com>
*/
.pic
#include <asm-offsets.h>
#include <config.h>
#include <common.h>
#include <asm/macro.h>
/*
* Jump vector table for EVIC mode
*/
#define ENA_DCAC 2UL
#define DIS_DCAC ~ENA_DCAC
#define ICAC_MEM_KBF_ISET (0x07) ! I Cache sets per way
#define ICAC_MEM_KBF_IWAY (0x07<<3) ! I cache ways
#define ICAC_MEM_KBF_ISZ (0x07<<6) ! I cache line size
#define DCAC_MEM_KBF_DSET (0x07) ! D Cache sets per way
#define DCAC_MEM_KBF_DWAY (0x07<<3) ! D cache ways
#define DCAC_MEM_KBF_DSZ (0x07<<6) ! D cache line size
#define PSW $ir0
#define EIT_INTR_PSW $ir1 ! interruption $PSW
#define EIT_PREV_IPSW $ir2 ! previous $IPSW
#define EIT_IVB $ir3 ! intr vector base address
#define EIT_EVA $ir4 ! MMU related Exception VA reg
#define EIT_PREV_EVA $ir5 ! previous $eva
#define EIT_ITYPE $ir6 ! interruption type
#define EIT_PREV_ITYPE $ir7 ! prev intr type
#define EIT_MACH_ERR $ir8 ! machine error log
#define EIT_INTR_PC $ir9 ! Interruption PC
#define EIT_PREV_IPC $ir10 ! previous $IPC
#define EIT_OVL_INTR_PC $ir11 ! overflow interruption PC
#define EIT_PREV_P0 $ir12 ! prev $P0
#define EIT_PREV_P1 $ir13 ! prev $p1
#define CR_ICAC_MEM $cr1 ! I-cache/memory config reg
#define CR_DCAC_MEM $cr2 ! D-cache/memory config reg
#define MR_CAC_CTL $mr8
.globl _start
_start: j reset
j tlb_fill
j tlb_not_present
j tlb_misc
j tlb_vlpt_miss
j machine_error
j debug
j general_exception
j syscall
j internal_interrupt ! H0I
j internal_interrupt ! H1I
j internal_interrupt ! H2I
j internal_interrupt ! H3I
j internal_interrupt ! H4I
j internal_interrupt ! H5I
j software_interrupt ! S0I
.balign 16
/*
* Andesboot Startup Code (reset vector)
*
* 1. bootstrap
* 1.1 reset - start of u-boot
* 1.2 to superuser mode - as is when reset
* 1.4 Do lowlevel_init
* - (this will jump out to lowlevel_init.S in SoC)
* - (lowlevel_init)
* 1.3 Turn off watchdog timer
* - (this will jump out to watchdog.S in SoC)
* - (turnoff_watchdog)
* 2. Do critical init when reboot (not from mem)
* 3. Relocate andesboot to ram
* 4. Setup stack
* 5. Jump to second stage (board_init_r)
*/
/* Note: TEXT_BASE is defined by the (board-dependent) linker script */
.globl _TEXT_BASE
_TEXT_BASE:
.word CONFIG_SYS_TEXT_BASE
/* IRQ stack memory (calculated at run-time) + 8 bytes */
.globl IRQ_STACK_START_IN
IRQ_STACK_START_IN:
.word 0x0badc0de
/*
* The bootstrap code of nds32 core
*/
reset:
/*
* gp = ~0 for burn mode
* = ~load_address for load mode
*/
reset_gp:
.relax_hint 0
sethi $gp, hi20(_GLOBAL_OFFSET_TABLE_-8)
.relax_hint 0
ori $gp, $gp, lo12(_GLOBAL_OFFSET_TABLE_-4)
add5.pc $gp
set_ivb:
li $r0, 0x0
/* turn on BTB */
mtsr $r0, $misc_ctl
/* set IVIC, vector size: 4 bytes, base: 0x0 */
mtsr $r0, $ivb
/*
* MMU_CTL NTC0 Non-cacheable
*/
li $r0, ~0x6
mfsr $r1, $mr0
and $r1, $r1, $r0
mtsr $r1, $mr0
li $r0, ~0x3
mfsr $r1, $mr8
and $r1, $r1, $r0
mtsr $r1, $mr8
#if !(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
/*
* MMU_CTL NTC0 Cacheable/Write-Back
*/
li $r0, 0x4
mfsr $r1, $mr0
or $r1, $r1, $r0
mtsr $r1, $mr0
#endif
#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
#ifdef CONFIG_ARCH_MAP_SYSMEM
/*
* MMU_CTL NTC1 Non-cacheable
*/
li $r0, ~0x18
mfsr $r1, $mr0
and $r1, $r1, $r0
mtsr $r1, $mr0
/*
* MMU_CTL NTM1 mapping for partition 0
*/
li $r0, ~0x6000
mfsr $r1, $mr0
and $r1, $r1, $r0
mtsr $r1, $mr0
#endif
#endif
#if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
li $r0, 0x1
mfsr $r1, $mr8
or $r1, $r1, $r0
mtsr $r1, $mr8
#endif
#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
li $r0, 0x2
mfsr $r1, $mr8
or $r1, $r1, $r0
mtsr $r1, $mr8
#endif
jal mem_init
#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
jal lowlevel_init
/*
* gp = ~VMA for burn mode
* = ~load_address for load mode
*/
update_gp:
.relax_hint 0
sethi $gp, hi20(_GLOBAL_OFFSET_TABLE_-8)
.relax_hint 0
ori $gp, $gp, lo12(_GLOBAL_OFFSET_TABLE_-4)
add5.pc $gp
#endif
/*
* do critical initializations first (shall be in short time)
* do self_relocation ASAP.
*/
/*
* Set the N1213 (Whitiger) core to superuser mode
* According to spec, it is already when reset
*/
#ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
jal turnoff_watchdog
#endif
/*
* Set stackpointer in internal RAM to call board_init_f
* $sp must be 8-byte alignment for ABI compliance.
*/
call_board_init_f:
li $sp, CONFIG_SYS_INIT_SP_ADDR
move $r0, $sp
bal board_init_f_alloc_reserve
move $sp, $r0
bal board_init_f_init_reserve
#ifdef CONFIG_DEBUG_UART
bal debug_uart_init
#endif
li $r0, 0x00000000
#ifdef __PIC__
#ifdef __NDS32_N1213_43U1H__
/* __NDS32_N1213_43U1H__ implies NDS32 V0 ISA */
la $r15, board_init_f ! store function address into $r15
#endif
#endif
j board_init_f ! jump to board_init_f() in lib/board.c
/*
* void relocate_code(addr_sp, gd, addr_moni)
*
* This "function" does not return, instead it continues in RAM
* after relocating the monitor code.
*
*/
/*
* gp = ~RAM_SIZE - TEXT_SIZE for burn/load mode
*/
.globl relocate_code
relocate_code:
move $r4, $r0 /* save addr_sp */
move $r5, $r1 /* save addr of gd */
move $r6, $r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
move $sp, $r4
la $r0, _start@GOTOFF
beq $r0, $r6, clear_bss /* skip relocation */
la $r1, _end@GOTOFF
move $r2, $r6 /* r2 <- scratch for copy_loop */
copy_loop:
lmw.bim $r11, [$r0], $r18
smw.bim $r11, [$r2], $r18
blt $r0, $r1, copy_loop
/*
* fix relocations related issues
*/
fix_relocations:
l.w $r0, _TEXT_BASE@GOTOFF /* r0 <- Text base */
sub $r9, $r6, $r0 /* r9 <- relocation offset */
la $r7, __rel_dyn_start@GOTOFF
add $r7, $r7, $r9 /* r2 <- rel __got_start in RAM */
la $r8, __rel_dyn_end@GOTOFF
add $r8, $r8, $r9 /* r2 <- rel __got_start in RAM */
li $r3, #0x2a /* R_NDS32_RELATIVE */
1:
lmw.bim $r0, [$r7], $r2 /* r0,r1,r2 <- adr,type,addend */
bne $r1, $r3, 2f
add $r0, $r0, $r9
add $r2, $r2, $r9
sw $r2, [$r0]
2:
blt $r7, $r8, 1b
clear_bss:
la $r0, __bss_start@GOTOFF /* r0 <- rel __bss_start in FLASH */
add $r0, $r0, $r9 /* r0 <- rel __bss_start in FLASH */
la $r1, __bss_end@GOTOFF /* r1 <- rel __bss_end in RAM */
add $r1, $r1, $r9 /* r0 <- rel __bss_end in RAM */
li $r2, 0x00000000 /* clear */
clbss_l:
sw $r2, [$r0] /* clear loop... */
addi $r0, $r0, #4
bne $r0, $r1, clbss_l
/*
* We are done. Do not return, instead branch to second part of board
* initialization, now running from RAM.
*/
call_board_init_r:
bal invalidate_icache_all
bal flush_dcache_all
la $r0, board_init_r@GOTOFF
move $lp, $r0 /* offset of board_init_r() */
add $lp, $lp, $r9 /* real address of board_init_r() */
/* setup parameters for board_init_r */
move $r0, $r5 /* gd_t */
move $r1, $r6 /* dest_addr */
#ifdef __PIC__
#ifdef __NDS32_N1213_43U1H__ /* NDS32 V0 ISA */
move $r15, $lp /* store function address into $r15 */
#endif
#endif
/* jump to it ... */
jr $lp /* jump to board_init_r() */
/*
* Invalidate I$
*/
invalidate_icac:
! read $cr1(I CAC/MEM cfg. reg.) configuration
mfsr $t0, CR_ICAC_MEM
! Get the ISZ field
andi $p0, $t0, ICAC_MEM_KBF_ISZ
! if $p0=0, then no I CAC existed
beqz $p0, end_flush_icache
! get $p0 the index of I$ block
srli $p0, $p0, 6
! $t1= bit width of I cache line size(ISZ)
addi $t1, $p0, 2
li $t4, 1
sll $t5, $t4, $t1 ! get $t5 cache line size
andi $p1, $t0, ICAC_MEM_KBF_ISET ! get the ISET field
addi $t2, $p1, 6 ! $t2= bit width of ISET
andi $p1, $t0, ICAC_MEM_KBF_IWAY ! get bitfield of Iway
srli $p1, $p1, 3
addi $p1, $p1, 1 ! then $p1 is I way number
add $t3, $t2, $t1 ! SHIFT
sll $p1, $p1, $t3 ! GET the total cache size
ICAC_LOOP:
sub $p1, $p1, $t5
cctl $p1, L1I_IX_INVAL
bnez $p1, ICAC_LOOP
end_flush_icache:
ret
/*
* Invalidate D$
*/
invalidate_dcac:
! read $cr2(D CAC/MEM cfg. reg.) configuration
mfsr $t0, CR_DCAC_MEM
! Get the DSZ field
andi $p0, $t0, DCAC_MEM_KBF_DSZ
! if $p0=0, then no D CAC existed
beqz $p0, end_flush_dcache
! get $p0 the index of D$ block
srli $p0, $p0, 6
! $t1= bit width of D cache line size(DSZ)
addi $t1, $p0, 2
li $t4, 1
sll $t5, $t4, $t1 ! get $t5 cache line size
andi $p1, $t0, DCAC_MEM_KBF_DSET ! get the DSET field
addi $t2, $p1, 6 ! $t2= bit width of DSET
andi $p1, $t0, DCAC_MEM_KBF_DWAY ! get bitfield of D way
srli $p1, $p1, 3
addi $p1, $p1, 1 ! then $p1 is D way number
add $t3, $t2, $t1 ! SHIFT
sll $p1, $p1, $t3 ! GET the total cache size
DCAC_LOOP:
sub $p1, $p1, $t5
cctl $p1, L1D_IX_INVAL
bnez $p1, DCAC_LOOP
end_flush_dcache:
ret
/*
* Interrupt handling
*/
/*
* exception handlers
*/
.align 5
.macro SAVE_ALL
! FIXME: Other way to get PC?
! FIXME: Update according to the newest spec!!
1:
li $r28, 1
push $r28
mfsr $r28, PSW ! $PSW
push $r28
mfsr $r28, EIT_EVA ! $ir1 $EVA
push $r28
mfsr $r28, EIT_ITYPE ! $ir2 $ITYPE
push $r28
mfsr $r28, EIT_MACH_ERR ! $ir3 Mach Error
push $r28
mfsr $r28, EIT_INTR_PSW ! $ir5 $IPSW
push $r28
mfsr $r28, EIT_PREV_IPSW ! $ir6 prev $IPSW
push $r28
mfsr $r28, EIT_PREV_EVA ! $ir7 prev $EVA
push $r28
mfsr $r28, EIT_PREV_ITYPE ! $ir8 prev $ITYPE
push $r28
mfsr $r28, EIT_INTR_PC ! $ir9 Interruption PC
push $r28
mfsr $r28, EIT_PREV_IPC ! $ir10 prev INTR_PC
push $r28
mfsr $r28, EIT_OVL_INTR_PC ! $ir11 Overflowed INTR_PC
push $r28
mfusr $r28, $d1.lo
push $r28
mfusr $r28, $d1.hi
push $r28
mfusr $r28, $d0.lo
push $r28
mfusr $r28, $d0.hi
push $r28
pushm $r0, $r30 ! store $sp-$r31, ra-$r30, $gp-$r29, $r28-$fp
addi $sp, $sp, -4 ! make room for implicit pt_regs parameters
.endm
.align 5
tlb_fill:
SAVE_ALL
move $r0, $sp ! To get the kernel stack
li $r1, 1 ! Determine interruption type
bal do_interruption
.align 5
tlb_not_present:
SAVE_ALL
move $r0, $sp ! To get the kernel stack
li $r1, 2 ! Determine interruption type
bal do_interruption
.align 5
tlb_misc:
SAVE_ALL
move $r0, $sp ! To get the kernel stack
li $r1, 3 ! Determine interruption type
bal do_interruption
.align 5
tlb_vlpt_miss:
SAVE_ALL
move $r0, $sp ! To get the kernel stack
li $r1, 4 ! Determine interruption type
bal do_interruption
.align 5
machine_error:
SAVE_ALL
move $r0, $sp ! To get the kernel stack
li $r1, 5 ! Determine interruption type
bal do_interruption
.align 5
debug:
SAVE_ALL
move $r0, $sp ! To get the kernel stack
li $r1, 6 ! Determine interruption type
bal do_interruption
.align 5
general_exception:
SAVE_ALL
move $r0, $sp ! To get the kernel stack
li $r1, 7 ! Determine interruption type
bal do_interruption
.align 5
syscall:
SAVE_ALL
move $r0, $sp ! To get the kernel stack
li $r1, 8 ! Determine interruption type
bal do_interruption
.align 5
internal_interrupt:
SAVE_ALL
move $r0, $sp ! To get the kernel stack
li $r1, 9 ! Determine interruption type
bal do_interruption
.align 5
software_interrupt:
SAVE_ALL
move $r0, $sp ! To get the kernel stack
li $r1, 10 ! Determine interruption type
bal do_interruption
.align 5

58
arch/nds32/cpu/n1213/u-boot.lds
View File

@ -1,58 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
OUTPUT_FORMAT("elf32-nds32", "elf32-nds32", "elf32-nds32")
OUTPUT_ARCH(nds32)
ENTRY(_start)
SECTIONS
{
. = ALIGN(4);
.text :
{
arch/nds32/cpu/n1213/start.o (.text)
*(.text)
}
. = ALIGN(4);
.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
. = ALIGN(4);
.data : { *(.data*) }
. = ALIGN(4);
.got : {
__got_start = .;
*(.got.plt) *(.got)
__got_end = .;
}
. = ALIGN(4);
.u_boot_list : {
KEEP(*(SORT(.u_boot_list*)));
}
. = ALIGN(4);
/DISCARD/ : { *(.rela.plt*) }
.rela.dyn : {
__rel_dyn_start = .;
*(.rela*)
__rel_dyn_end = .;
}
_end = .;
.bss : {
__bss_start = .;
*(.bss)
. = ALIGN(4);
__bss_end = .;
}
}

15
arch/nds32/dts/Makefile
View File

@ -1,15 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
dtb-$(CONFIG_TARGET_ADP_AG101P) += ag101p.dtb
dtb-$(CONFIG_TARGET_ADP_AE3XX) += ae3xx.dtb
include $(srctree)/scripts/Makefile.dts
targets += $(dtb-y)
DTC_FLAGS += -R 4 -p 0x1000
PHONY += dtbs
dtbs: $(addprefix $(obj)/, $(dtb-y))
@:
clean-files := *.dtb

103
arch/nds32/dts/ae3xx.dts
View File

@ -1,103 +0,0 @@
/dts-v1/;
/ {
compatible = "nds32 ae3xx";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
aliases {
uart0 = &serial0;
ethernet0 = &mac0;
spi0 = &spi;
} ;
chosen {
/* bootargs = "console=ttyS0,38400n8 earlyprintk=uart8250-32bit,0xf0300000 debug bootmem_debug memblock=debug loglevel=7"; */
bootargs = "console=ttyS0,38400n8 earlyprintk=uart8250-32bit,0xf0300000 debug loglevel=7";
stdout-path = "uart0:38400n8";
tick-timer = &timer0;
};
memory@0 {
device_type = "memory";
reg = <0x00000000 0x40000000>;
};
spiclk: virt_100mhz {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <100000000>;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "andestech,n13";
reg = <0>;
/* FIXME: to fill correct frqeuency */
clock-frequency = <60000000>;
};
};
intc: interrupt-controller {
compatible = "andestech,atnointc010";
#interrupt-cells = <1>;
interrupt-controller;
};
serial0: serial@f0300000 {
compatible = "andestech,uart16550", "ns16550a";
reg = <0xf0300000 0x1000>;
interrupts = <7 4>;
clock-frequency = <14745600>;
reg-shift = <2>;
reg-offset = <32>;
no-loopback-test = <1>;
};
timer0: timer@f0400000 {
compatible = "andestech,atcpit100";
reg = <0xf0400000 0x1000>;
interrupts = <2 4>;
clock-frequency = <30000000>;
};
mac0: mac@e0100000 {
compatible = "andestech,atmac100";
reg = <0xe0100000 0x1000>;
interrupts = <25 4>;
};
mmc0: mmc@f0e00000 {
compatible = "andestech,atfsdc010";
max-frequency = <100000000>;
fifo-depth = <0x10>;
reg = <0xf0e00000 0x1000>;
interrupts = <17 4>;
};
nor@0,0 {
compatible = "cfi-flash";
reg = <0x88000000 0x1000>;
bank-width = <2>;
device-width = <1>;
};
spi: spi@f0b00000 {
compatible = "andestech,atcspi200";
reg = <0xf0b00000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
num-cs = <1>;
clocks = <&spiclk>;
interrupts = <3 4>;
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
spi-cpol;
spi-cpha;
};
};
};

72
arch/nds32/dts/ag101p.dts
View File

@ -1,72 +0,0 @@
/dts-v1/;
/ {
compatible = "nds32 ag101p";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
aliases {
uart0 = &serial0;
ethernet0 = &mac0;
} ;
chosen {
/* bootargs = "console=ttyS0,38400n8 earlyprintk=uart8250-32bit,0x99600000 debug bootmem_debug memblock=debug loglevel=7"; */
bootargs = "console=ttyS0,38400n8 earlyprintk=uart8250-32bit,0x99600000 debug loglevel=7";
stdout-path = "uart0:38400n8";
tick-timer = &timer0;
};
memory@0 {
device_type = "memory";
reg = <0x00000000 0x40000000>;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "andestech,n13";
reg = <0>;
/* FIXME: to fill correct frqeuency */
clock-frequency = <60000000>;
};
};
intc: interrupt-controller {
compatible = "andestech,atnointc010";
#interrupt-cells = <1>;
interrupt-controller;
};
serial0: serial@99600000 {
compatible = "andestech,uart16550", "ns16550a";
reg = <0x99600000 0x1000>;
interrupts = <7 4>;
clock-frequency = <14745600>;
reg-shift = <2>;
no-loopback-test = <1>;
};
timer0: timer@98400000 {
compatible = "andestech,attmr010";
reg = <0x98400000 0x1000>;
interrupts = <19 4>;
clock-frequency = <15000000>;
};
mac0: mac@90900000 {
compatible = "andestech,atmac100";
reg = <0x90900000 0x1000>;
interrupts = <25 4>;
};
mmc0: mmc@98e00000 {
compatible = "andestech,atfsdc010";
max-frequency = <30000000>;
fifo-depth = <0x10>;
reg = <0x98e00000 0x1000>;
interrupts = <5 4>;
cap-sd-highspeed;
};
};

51
arch/nds32/include/asm/arch-ae3xx/ae3xx.h
View File

@ -1,51 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2016 Andes Technology Corporation
* Nobuhiro Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
#ifndef __AE3XX_H
#define __AE3XX_H
/* Hardware register bases */
/* Static Memory Controller (SRAM) */
#define CONFIG_FTSMC020_BASE 0xe0400000
/* DMA Controller */
#define CONFIG_FTDMAC020_BASE 0xf0c00000
/* AHB-to-APB Bridge */
#define CONFIG_FTAPBBRG020S_01_BASE 0xf0000000
/* Reserved */
#define CONFIG_RESERVED_01_BASE 0xe0500000
/* Reserved */
#define CONFIG_RESERVED_02_BASE 0xf0800000
/* Reserved */
#define CONFIG_RESERVED_03_BASE 0xf0900000
/* Ethernet */
#define CONFIG_FTMAC100_BASE 0xe0100000
/* Reserved */
#define CONFIG_RESERVED_04_BASE 0xf1000000
/* APB Device definitions */
/* UART1 */
#define CONFIG_FTUART010_01_BASE 0xf0200000
/* UART2 */
#define CONFIG_FTUART010_02_BASE 0xf0300000
/* Counter/Timers */
#define CONFIG_FTTMR010_BASE 0xf0400000
/* Watchdog Timer */
#define CONFIG_FTWDT010_BASE 0xf0500000
/* Real Time Clock */
#define CONFIG_FTRTC010_BASE 0xf0600000
/* GPIO */
#define CONFIG_FTGPIO010_BASE 0xf0700000
/* I2C */
#define CONFIG_FTIIC010_BASE 0xf0a00000
/* The following address was not defined in Linux */
/* Synchronous Serial Port Controller (SSP) 01 */
#define CONFIG_FTSSP010_01_BASE 0xf0d00000
#endif /* __AE3XX_H */

85
arch/nds32/include/asm/arch-ag101/ag101.h
View File

@ -1,85 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2011 Andes Technology Corporation
* Nobuhiro Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
#ifndef __AG101_H
#define __AG101_H
/* Hardware register bases */
/* AHB Controller */
#define CONFIG_FTAHBC020S_BASE 0x90100000
/* Static Memory Controller (SRAM) */
#define CONFIG_FTSMC020_BASE 0x90200000
/* FTSDMC021 SDRAM Controller */
#define CONFIG_FTSDMC021_BASE 0x90300000
/* DMA Controller */
#define CONFIG_FTDMAC020_BASE 0x90400000
/* AHB-to-APB Bridge */
#define CONFIG_FTAPBBRG020S_01_BASE 0x90500000
/* LCD Controller */
#define CONFIG_FTLCDC100_BASE 0x90600000
/* Reserved */
#define CONFIG_RESERVED_01_BASE 0x90700000
/* Reserved */
#define CONFIG_RESERVED_02_BASE 0x90800000
/* Ethernet */
#define CONFIG_FTMAC100_BASE 0x90900000
/* External USB host */
#define CONFIG_EXT_USB_HOST_BASE 0x90A00000
/* USB Device */
#define CONFIG_USB_DEV_BASE 0x90B00000
/* External AHB-to-PCI Bridge (FTPCI100 not exist in ag101) */
#define CONFIG_EXT_AHBPCIBRG_BASE 0x90C00000
/* Reserved */
#define CONFIG_RESERVED_03_BASE 0x90D00000
/* External AHB-to-APB Bridger (FTAPBBRG020S_02) */
#define CONFIG_EXT_AHBAPBBRG_BASE 0x90E00000
/* External AHB slave1 (LCD) */
#define CONFIG_EXT_AHBSLAVE01_BASE 0x90F00000
/* External AHB slave2 (FUSBH200) */
#define CONFIG_EXT_AHBSLAVE02_BASE 0x92000000
/* APB Device definitions */
/* Power Management Unit */
#define CONFIG_FTPMU010_BASE 0x98100000
/* BT UART 2/IrDA (UART 01 in Linux) */
#define CONFIG_FTUART010_01_BASE 0x98300000
/* Counter/Timers */
#define CONFIG_FTTMR010_BASE 0x98400000
/* Watchdog Timer */
#define CONFIG_FTWDT010_BASE 0x98500000
/* Real Time Clock */
#define CONFIG_FTRTC010_BASE 0x98600000
/* GPIO */
#define CONFIG_FTGPIO010_BASE 0x98700000
/* Interrupt Controller */
#define CONFIG_FTINTC010_BASE 0x98800000
/* I2C */
#define CONFIG_FTIIC010_BASE 0x98A00000
/* Reserved */
#define CONFIG_RESERVED_04_BASE 0x98C00000
/* Compat Flash Controller */
#define CONFIG_FTCFC010_BASE 0x98D00000
/* Synchronous Serial Port Controller (SSP) I2S/AC97 */
#define CONFIG_FTSSP010_02_BASE 0x99400000
/* ST UART ? SSP 02 (UART 02 in Linux) */
#define CONFIG_FTUART010_02_BASE 0x99600000
/* The following address was not defined in Linux */
/* FF UART 3 */
#define CONFIG_FTUART010_03_BASE 0x98200000
/* Synchronous Serial Port Controller (SSP) 01 */
#define CONFIG_FTSSP010_01_BASE 0x98B00000
/* IrDA */
#define CONFIG_IRDA_BASE 0x98900000
/* PWM - Pulse Width Modulator Controller */
#define CONFIG_PMW_BASE 0x99100000
#endif /* __AG101_H */

78
arch/nds32/include/asm/arch-ag102/ag102.h
View File

@ -1,78 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2011 Andes Technology Corporation
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
#ifndef __AG102_H
#define __AG102_H
/*
* Hardware register bases
*/
/* LPC Controller */
#define CONFIG_LPC_IO_BASE 0x90100000
/* LPC Controller */
#define CONFIG_LPC_BASE 0x90200000
/* NDS32 Data Local Memory 01 */
#define CONFIG_NDS_DLM1_BASE 0x90300000
/* NDS32 Data Local Memory 02 */
#define CONFIG_NDS_DLM2_BASE 0x90400000
/* Synopsys DWC DDR2/1 Controller */
#define CONFIG_DWCDDR21MCTL_BASE 0x90500000
/* DMA Controller */
#define CONFIG_FTDMAC020_BASE 0x90600000
/* FTIDE020_S IDE (ATA) Controller */
#define CONFIG_FTIDE020S_BASE 0x90700000
/* USB OTG Controller */
#define CONFIG_FZOTG266HD0A_BASE 0x90800000
/* Andes L2 Cache Controller */
#define CONFIG_NCEL2C100_BASE 0x90900000
/* XGI XG22 GPU */
#define CONFIG_XGI_XG22_BASE 0x90A00000
/* GMAC Ethernet Controller */
#define CONFIG_FTGMAC100_BASE 0x90B00000
/* AHB Controller */
#define CONFIG_FTAHBC020S_BASE 0x90C00000
/* AHB-to-APB Bridge Controller */
#define CONFIG_FTAPBBRG020S_01_BASE 0x90D00000
/* External AHB2AHB Controller */
#define CONFIG_EXT_AHB2AHB_BASE 0x90E00000
/* Andes Multi-core Interrupt Controller */
#define CONFIG_NCEMIC100_BASE 0x90F00000
/*
* APB Device definitions
*/
/* Compat Flash Controller */
#define CONFIG_FTCFC010_BASE 0x94000000
/* APB - SSP (SPI) (without AC97) Controller */
#define CONFIG_FTSSP010_01_BASE 0x94100000
/* UART1 - APB STUART Controller (UART0 in Linux) */
#define CONFIG_FTUART010_01_BASE 0x94200000
/* APB - SSP with HDA/AC97 Controller */
#define CONFIG_FTSSP010_02_BASE 0x94500000
/* UART2 - APB STUART Controller (UART1 in Linux) */
#define CONFIG_FTUART010_02_BASE 0x94600000
/* PCU Controller */
#define CONFIG_ANDES_PCU_BASE 0x94800000
/* FTTMR010 Timer */
#define CONFIG_FTTMR010_BASE 0x94900000
/* Watch Dog Controller */
#define CONFIG_FTWDT010_BASE 0x94A00000
/* FTRTC010 Real Time Clock */
#define CONFIG_FTRTC010_BASE 0x98B00000
/* GPIO Controller */
#define CONFIG_FTGPIO010_BASE 0x94C00000
/* I2C Controller */
#define CONFIG_FTIIC010_BASE 0x94E00000
/* PWM - Pulse Width Modulator Controller */
#define CONFIG_FTPWM010_BASE 0x94F00000
/* Power Management Unit */
#define CONFIG_FTPMU010_BASE 0x98100000
#endif /* __AG102_H */

194
arch/nds32/include/asm/bitops.h
View File

@ -1,194 +0,0 @@
/*
* Copyright 1995, Russell King.
* Various bits and pieces copyrights include:
* Linus Torvalds (test_bit).
*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
*
* bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
*
* Please note that the code in this file should never be included
* from user space. Many of these are not implemented in assembler
* since they would be too costly. Also, they require priviledged
* instructions (which are not available from user mode) to ensure
* that they are atomic.
*/
#ifndef __ASM_NDS_BITOPS_H
#define __ASM_NDS_BITOPS_H
#ifdef __KERNEL__
#include <asm/system.h>
#include <asm-generic/bitops/fls.h>
#include <asm-generic/bitops/__fls.h>
#include <asm-generic/bitops/fls64.h>
#include <asm-generic/bitops/__ffs.h>
#define smp_mb__before_clear_bit() do { } while (0)
#define smp_mb__after_clear_bit() do { } while (0)
/*
* Function prototypes to keep gcc -Wall happy.
*/
extern void set_bit(int nr, void *addr);
static inline void __set_bit(int nr, void *addr)
{
int *a = (int *)addr;
int mask;
a += nr >> 5;
mask = 1 << (nr & 0x1f);
*a |= mask;
}
#define PLATFORM__SET_BIT
extern void clear_bit(int nr, void *addr);
static inline void __clear_bit(int nr, void *addr)
{
int *a = (int *)addr;
int mask;
unsigned long flags;
a += nr >> 5;
mask = 1 << (nr & 0x1f);
local_irq_save(flags);
*a &= ~mask;
local_irq_restore(flags);
}
#define PLATFORM__CLEAR_BIT
extern void change_bit(int nr, void *addr);
static inline void __change_bit(int nr, void *addr)
{
int mask;
unsigned long *ADDR = (unsigned long *)addr;
ADDR += nr >> 5;
mask = 1 << (nr & 31);
*ADDR ^= mask;
}
extern int test_and_set_bit(int nr, void *addr);
static inline int __test_and_set_bit(int nr, void *addr)
{
int mask, retval;
unsigned int *a = (unsigned int *)addr;
a += nr >> 5;
mask = 1 << (nr & 0x1f);
retval = (mask & *a) != 0;
*a |= mask;
return retval;
}
extern int test_and_clear_bit(int nr, void *addr);
static inline int __test_and_clear_bit(int nr, void *addr)
{
int mask, retval;
unsigned int *a = (unsigned int *)addr;
a += nr >> 5;
mask = 1 << (nr & 0x1f);
retval = (mask & *a) != 0;
*a &= ~mask;
return retval;
}
extern int test_and_change_bit(int nr, void *addr);
static inline int __test_and_change_bit(int nr, void *addr)
{
int mask, retval;
unsigned int *a = (unsigned int *)addr;
a += nr >> 5;
mask = 1 << (nr & 0x1f);
retval = (mask & *a) != 0;
*a ^= mask;
return retval;
}
extern int find_first_zero_bit(void *addr, unsigned size);
extern int find_next_zero_bit(void *addr, int size, int offset);
/*
* This routine doesn't need to be atomic.
*/
static inline int test_bit(int nr, const void *addr)
{
return ((unsigned char *) addr)[nr >> 3] & (1U << (nr & 7));
}
/*
* ffz = Find First Zero in word. Undefined if no zero exists,
* so code should check against ~0UL first..
*/
static inline unsigned long ffz(unsigned long word)
{
int k;
word = ~word;
k = 31;
if (word & 0x0000ffff) {
k -= 16; word <<= 16;
}
if (word & 0x00ff0000) {
k -= 8; word <<= 8;
}
if (word & 0x0f000000) {
k -= 4; word <<= 4;
}
if (word & 0x30000000) {
k -= 2; word <<= 2;
}
if (word & 0x40000000)
k -= 1;
return k;
}
/*
* ffs: find first bit set. This is defined the same way as
* the libc and compiler builtin ffs routines, therefore
* differs in spirit from the above ffz (man ffs).
*/
/*
* redefined in include/linux/bitops.h
* #define ffs(x) generic_ffs(x)
*/
/*
* hweightN: returns the hamming weight (i.e. the number
* of bits set) of a N-bit word
*/
#define hweight32(x) generic_hweight32(x)
#define hweight16(x) generic_hweight16(x)
#define hweight8(x) generic_hweight8(x)
#define ext2_set_bit test_and_set_bit
#define ext2_clear_bit test_and_clear_bit
#define ext2_test_bit test_bit
#define ext2_find_first_zero_bit find_first_zero_bit
#define ext2_find_next_zero_bit find_next_zero_bit
/* Bitmap functions for the minix filesystem. */
#define minix_test_and_set_bit(nr, addr) test_and_set_bit(nr, addr)
#define minix_set_bit(nr, addr) set_bit(nr, addr)
#define minix_test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr)
#define minix_test_bit(nr, addr) test_bit(nr, addr)
#define minix_find_first_zero_bit(addr, size) find_first_zero_bit(addr, size)
#endif /* __KERNEL__ */
#endif /* __ASM_NDS_BITOPS_H */

60
arch/nds32/include/asm/bootm.h
View File

@ -1,60 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (c) 2013, Google Inc.
*
* Copyright (C) 2011
* Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
*/
#ifndef NDS32_BOOTM_H
#define NDS32_BOOTM_H
#include <asm/setup.h>
extern void udc_disconnect(void);
#ifdef CONFIG_SUPPORT_PASSING_ATAGS
# define BOOTM_ENABLE_TAGS 1
#else
# define BOOTM_ENABLE_TAGS 0
#endif
#ifdef CONFIG_SETUP_MEMORY_TAGS
# define BOOTM_ENABLE_MEMORY_TAGS 1
#else
# define BOOTM_ENABLE_MEMORY_TAGS 0
#endif
#ifdef CONFIG_CMDLINE_TAG
#define BOOTM_ENABLE_CMDLINE_TAG 1
#else
#define BOOTM_ENABLE_CMDLINE_TAG 0
#endif
#ifdef CONFIG_INITRD_TAG
#define BOOTM_ENABLE_INITRD_TAG 1
#else
#define BOOTM_ENABLE_INITRD_TAG 0
#endif
#ifdef CONFIG_SERIAL_TAG
#define BOOTM_ENABLE_SERIAL_TAG 1
void get_board_serial(struct tag_serialnr *serialnr);
#else
#define BOOTM_ENABLE_SERIAL_TAG 0
static inline void get_board_serial(struct tag_serialnr *serialnr)
{
}
#endif
#ifdef CONFIG_REVISION_TAG
#define BOOTM_ENABLE_REVISION_TAG 1
u32 get_board_rev(void);
#else
#define BOOTM_ENABLE_REVISION_TAG 0
static inline u32 get_board_rev(void)
{
return 0;
}
#endif
#endif

36
arch/nds32/include/asm/byteorder.h
View File

@ -1,36 +0,0 @@
/*
* linux/include/asm-arm/byteorder.h
*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*
* ARM Endian-ness. In little endian mode, the data bus is connected such
* that byte accesses appear as:
* 0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
* and word accesses (data or instruction) appear as:
* d0...d31
*
* When in big endian mode, byte accesses appear as:
* 0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7
* and word accesses (data or instruction) appear as:
* d0...d31
*/
#ifndef __ASM_NDS_BYTEORDER_H
#define __ASM_NDS_BYTEORDER_H
#include <asm/types.h>
#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
# define __BYTEORDER_HAS_U64__
# define __SWAB_64_THRU_32__
#endif
#ifdef __NDSEB__
#include <linux/byteorder/big_endian.h>
#else
#include <linux/byteorder/little_endian.h>
#endif
#endif

63
arch/nds32/include/asm/cache.h
View File

@ -1,63 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
#ifndef _ASM_CACHE_H
#define _ASM_CACHE_H
/* cache */
int icache_status(void);
void icache_enable(void);
void icache_disable(void);
int dcache_status(void);
void dcache_enable(void);
void dcache_disable(void);
void cache_flush(void);
#define DEFINE_GET_SYS_REG(reg) \
static inline unsigned long GET_##reg(void) \
{ \
unsigned long val; \
__asm__ volatile ( \
"mfsr %0, $"#reg : "=&r" (val) : : "memory" \
); \
return val; \
}
enum cache_t {ICACHE, DCACHE};
DEFINE_GET_SYS_REG(ICM_CFG);
DEFINE_GET_SYS_REG(DCM_CFG);
/* I-cache sets (# of cache lines) per way */
#define ICM_CFG_OFF_ISET 0
/* I-cache ways */
#define ICM_CFG_OFF_IWAY 3
#define ICM_CFG_MSK_ISET (0x7 << ICM_CFG_OFF_ISET)
#define ICM_CFG_MSK_IWAY (0x7 << ICM_CFG_OFF_IWAY)
/* D-cache sets (# of cache lines) per way */
#define DCM_CFG_OFF_DSET 0
/* D-cache ways */
#define DCM_CFG_OFF_DWAY 3
#define DCM_CFG_MSK_DSET (0x7 << DCM_CFG_OFF_DSET)
#define DCM_CFG_MSK_DWAY (0x7 << DCM_CFG_OFF_DWAY)
/* I-cache line size */
#define ICM_CFG_OFF_ISZ 6
#define ICM_CFG_MSK_ISZ (0x7UL << ICM_CFG_OFF_ISZ)
/* D-cache line size */
#define DCM_CFG_OFF_DSZ 6
#define DCM_CFG_MSK_DSZ (0x7UL << DCM_CFG_OFF_DSZ)
/*
* The current upper bound for NDS32 L1 data cache line sizes is 32 bytes.
* We use that value for aligning DMA buffers unless the board config has
* specified an alternate cache line size.
*/
#ifdef CONFIG_SYS_CACHELINE_SIZE
#define ARCH_DMA_MINALIGN CONFIG_SYS_CACHELINE_SIZE
#else
#define ARCH_DMA_MINALIGN 32
#endif
#endif /* _ASM_CACHE_H */

11
arch/nds32/include/asm/config.h
View File

@ -1,11 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2011 Andes Technology Corporation
* Copyright (C) 2010 Shawn Lin (nobuhiro@andestech.com)
* Copyright (C) 2011 Macpaul Lin (macpaul@andestech.com)
*/
#ifndef _ASM_CONFIG_H_
#define _ASM_CONFIG_H_
#endif

22
arch/nds32/include/asm/dma-mapping.h
View File

@ -1,22 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2013 Andes Technology Corporation
* Ken Kuo, Andes Technology Corporation <ken_kuo@andestech.com>
*/
#ifndef __ASM_NDS_DMA_MAPPING_H
#define __ASM_NDS_DMA_MAPPING_H
#include <common.h>
#include <asm/cache.h>
#include <cpu_func.h>
#include <linux/dma-direction.h>
#include <linux/types.h>
#include <malloc.h>
static void *dma_alloc_coherent(size_t len, unsigned long *handle)
{
*handle = (unsigned long)memalign(ARCH_DMA_MINALIGN, len);
return (void *)*handle;
}
#endif /* __ASM_NDS_DMA_MAPPING_H */

35
arch/nds32/include/asm/global_data.h
View File

@ -1,35 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
/**************************************************************
* CAUTION:
* - do not implement for NDS32 Arch yet.
* - so far no one uses the macros defined in this head file.
**************************************************************/
#ifndef __ASM_GBL_DATA_H
#define __ASM_GBL_DATA_H
#include <config.h>
/* Architecture-specific global data */
struct arch_global_data {
};
#include <asm-generic/global_data.h>
#ifdef CONFIG_GLOBAL_DATA_NOT_REG10
extern volatile gd_t g_gd;
#define DECLARE_GLOBAL_DATA_PTR static volatile gd_t *gd = &g_gd
#else
#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("$r10")
#endif
#endif /* __ASM_GBL_DATA_H */

457
arch/nds32/include/asm/io.h
View File

@ -1,457 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* linux/include/asm-nds/io.h
*
* Copyright (C) 1996-2000 Russell King
*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*
* Modifications:
* 16-Sep-1996 RMK Inlined the inx/outx functions & optimised for both
* constant addresses and variable addresses.
* 04-Dec-1997 RMK Moved a lot of this stuff to the new architecture
* specific IO header files.
* 27-Mar-1999 PJB Second parameter of memcpy_toio is const..
* 04-Apr-1999 PJB Added check_signature.
* 12-Dec-1999 RMK More cleanups
* 18-Jun-2000 RMK Removed virt_to_* and friends definitions
*/
#ifndef __ASM_NDS_IO_H
#define __ASM_NDS_IO_H
/*
* CAUTION:
* - do not implement for NDS32 Arch yet.
* - cmd_pci.c, cmd_scsi.c, Lynxkdi.c, usb.c, usb_storage.c, etc...
* iinclude asm/io.h
*/
#ifdef __KERNEL__
#include <linux/types.h>
#include <asm/byteorder.h>
static inline void sync(void)
{
}
#ifdef CONFIG_ARCH_MAP_SYSMEM
static inline void *map_sysmem(phys_addr_t paddr, unsigned long len)
{
if(paddr <PHYS_SDRAM_0_SIZE + PHYS_SDRAM_1_SIZE)
paddr = paddr | 0x40000000;
return (void *)(uintptr_t)paddr;
}
static inline void *unmap_sysmem(const void *vaddr)
{
phys_addr_t paddr = (phys_addr_t)vaddr;
paddr = paddr & ~0x40000000;
return (void *)(uintptr_t)paddr;
}
static inline phys_addr_t map_to_sysmem(const void *ptr)
{
return (phys_addr_t)(uintptr_t)ptr;
}
#endif
/*
* Generic virtual read/write. Note that we don't support half-word
* read/writes. We define __arch_*[bl] here, and leave __arch_*w
* to the architecture specific code.
*/
#define __arch_getb(a) (*(unsigned char *)(a))
#define __arch_getw(a) (*(unsigned short *)(a))
#define __arch_getl(a) (*(unsigned int *)(a))
#define __arch_putb(v, a) (*(unsigned char *)(a) = (v))
#define __arch_putw(v, a) (*(unsigned short *)(a) = (v))
#define __arch_putl(v, a) (*(unsigned int *)(a) = (v))
extern void __raw_writesb(unsigned int addr, const void *data, int bytelen);
extern void __raw_writesw(unsigned int addr, const void *data, int wordlen);
extern void __raw_writesl(unsigned int addr, const void *data, int longlen);
extern void __raw_readsb(unsigned int addr, void *data, int bytelen);
extern void __raw_readsw(unsigned int addr, void *data, int wordlen);
extern void __raw_readsl(unsigned int addr, void *data, int longlen);
#define __raw_writeb(v, a) __arch_putb(v, a)
#define __raw_writew(v, a) __arch_putw(v, a)
#define __raw_writel(v, a) __arch_putl(v, a)
#define __raw_readb(a) __arch_getb(a)
#define __raw_readw(a) __arch_getw(a)
#define __raw_readl(a) __arch_getl(a)
/*
* TODO: The kernel offers some more advanced versions of barriers, it might
* have some advantages to use them instead of the simple one here.
*/
#define dmb() __asm__ __volatile__ ("" : : : "memory")
#define __iormb() dmb()
#define __iowmb() dmb()
static inline void writeb(u8 val, volatile void __iomem *addr)
{
__iowmb();
__arch_putb(val, addr);
}
static inline void writew(u16 val, volatile void __iomem *addr)
{
__iowmb();
__arch_putw(val, addr);
}
static inline void writel(u32 val, volatile void __iomem *addr)
{
__iowmb();
__arch_putl(val, addr);
}
static inline u8 readb(const volatile void __iomem *addr)
{
u8 val;
val = __arch_getb(addr);
__iormb();
return val;
}
static inline u16 readw(const volatile void __iomem *addr)
{
u16 val;
val = __arch_getw(addr);
__iormb();
return val;
}
static inline u32 readl(const volatile void __iomem *addr)
{
u32 val;
val = __arch_getl(addr);
__iormb();
return val;
}
/*
* The compiler seems to be incapable of optimising constants
* properly. Spell it out to the compiler in some cases.
* These are only valid for small values of "off" (< 1<<12)
*/
#define __raw_base_writeb(val, base, off) __arch_base_putb(val, base, off)
#define __raw_base_writew(val, base, off) __arch_base_putw(val, base, off)
#define __raw_base_writel(val, base, off) __arch_base_putl(val, base, off)
#define __raw_base_readb(base, off) __arch_base_getb(base, off)
#define __raw_base_readw(base, off) __arch_base_getw(base, off)
#define __raw_base_readl(base, off) __arch_base_getl(base, off)
#define out_arch(type, endian, a, v) __raw_write##type(cpu_to_##endian(v), a)
#define in_arch(type, endian, a) endian##_to_cpu(__raw_read##type(a))
#define out_le32(a, v) out_arch(l, le32, a, v)
#define out_le16(a, v) out_arch(w, le16, a, v)
#define in_le32(a) in_arch(l, le32, a)
#define in_le16(a) in_arch(w, le16, a)
#define out_be32(a, v) out_arch(l, be32, a, v)
#define out_be16(a, v) out_arch(w, be16, a, v)
#define in_be32(a) in_arch(l, be32, a)
#define in_be16(a) in_arch(w, be16, a)
#define out_8(a, v) __raw_writeb(v, a)
#define in_8(a) __raw_readb(a)
/*
* Clear and set bits in one shot. These macros can be used to clear and
* set multiple bits in a register using a single call. These macros can
* also be used to set a multiple-bit bit pattern using a mask, by
* specifying the mask in the 'clear' parameter and the new bit pattern
* in the 'set' parameter.
*/
#define clrbits(type, addr, clear) \
out_##type((addr), in_##type(addr) & ~(clear))
#define setbits(type, addr, set) \
out_##type((addr), in_##type(addr) | (set))
#define clrsetbits(type, addr, clear, set) \
out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
#define clrbits_be32(addr, clear) clrbits(be32, addr, clear)
#define setbits_be32(addr, set) setbits(be32, addr, set)
#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
#define clrbits_le32(addr, clear) clrbits(le32, addr, clear)
#define setbits_le32(addr, set) setbits(le32, addr, set)
#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
#define clrbits_be16(addr, clear) clrbits(be16, addr, clear)
#define setbits_be16(addr, set) setbits(be16, addr, set)
#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
#define clrbits_le16(addr, clear) clrbits(le16, addr, clear)
#define setbits_le16(addr, set) setbits(le16, addr, set)
#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
#define clrbits_8(addr, clear) clrbits(8, addr, clear)
#define setbits_8(addr, set) setbits(8, addr, set)
#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
/*
* Now, pick up the machine-defined IO definitions
* #include <asm/arch/io.h>
*/
/*
* IO port access primitives
* -------------------------
*
* The NDS32 doesn't have special IO access instructions just like ARM;
* all IO is memory mapped.
* Note that these are defined to perform little endian accesses
* only. Their primary purpose is to access PCI and ISA peripherals.
*
* Note that for a big endian machine, this implies that the following
* big endian mode connectivity is in place, as described by numerious
* ARM documents:
*
* PCI: D0-D7 D8-D15 D16-D23 D24-D31
* ARM: D24-D31 D16-D23 D8-D15 D0-D7
*
* The machine specific io.h include defines __io to translate an "IO"
* address to a memory address.
*
* Note that we prevent GCC re-ordering or caching values in expressions
* by introducing sequence points into the in*() definitions. Note that
* __raw_* do not guarantee this behaviour.
*
* The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
*/
#ifdef __io
#define outb(v, p) __raw_writeb(v, __io(p))
#define outw(v, p) __raw_writew(cpu_to_le16(v), __io(p))
#define outl(v, p) __raw_writel(cpu_to_le32(v), __io(p))
#define inb(p) ({ unsigned int __v = __raw_readb(__io(p)); __v; })
#define inw(p) ({ unsigned int __v = le16_to_cpu(__raw_readw(__io(p))); __v; })
#define inl(p) ({ unsigned int __v = le32_to_cpu(__raw_readl(__io(p))); __v; })
#define outsb(p, d, l) writesb(__io(p), d, l)
#define outsw(p, d, l) writesw(__io(p), d, l)
#define outsl(p, d, l) writesl(__io(p), d, l)
#define insb(p, d, l) readsb(__io(p), d, l)
#define insw(p, d, l) readsw(__io(p), d, l)
#define insl(p, d, l) readsl(__io(p), d, l)
static inline void readsb(unsigned int *addr, void * data, int bytelen)
{
unsigned char *ptr = (unsigned char *)addr;
unsigned char *ptr2 = (unsigned char *)data;
while (bytelen) {
*ptr2 = *ptr;
ptr2++;
bytelen--;
}
}
static inline void readsw(unsigned int *addr, void * data, int wordlen)
{
unsigned short *ptr = (unsigned short *)addr;
unsigned short *ptr2 = (unsigned short *)data;
while (wordlen) {
*ptr2 = *ptr;
ptr2++;
wordlen--;
}
}
static inline void readsl(unsigned int *addr, void * data, int longlen)
{
unsigned int *ptr = (unsigned int *)addr;
unsigned int *ptr2 = (unsigned int *)data;
while (longlen) {
*ptr2 = *ptr;
ptr2++;
longlen--;
}
}
static inline void writesb(unsigned int *addr, const void * data, int bytelen)
{
unsigned char *ptr = (unsigned char *)addr;
unsigned char *ptr2 = (unsigned char *)data;
while (bytelen) {
*ptr = *ptr2;
ptr2++;
bytelen--;
}
}
static inline void writesw(unsigned int *addr, const void * data, int wordlen)
{
unsigned short *ptr = (unsigned short *)addr;
unsigned short *ptr2 = (unsigned short *)data;
while (wordlen) {
*ptr = *ptr2;
ptr2++;
wordlen--;
}
}
static inline void writesl(unsigned int *addr, const void * data, int longlen)
{
unsigned int *ptr = (unsigned int *)addr;
unsigned int *ptr2 = (unsigned int *)data;
while (longlen) {
*ptr = *ptr2;
ptr2++;
longlen--;
}
}
#endif
#define outb_p(val, port) outb((val), (port))
#define outw_p(val, port) outw((val), (port))
#define outl_p(val, port) outl((val), (port))
#define inb_p(port) inb((port))
#define inw_p(port) inw((port))
#define inl_p(port) inl((port))
#define outsb_p(port, from, len) outsb(port, from, len)
#define outsw_p(port, from, len) outsw(port, from, len)
#define outsl_p(port, from, len) outsl(port, from, len)
#define insb_p(port, to, len) insb(port, to, len)
#define insw_p(port, to, len) insw(port, to, len)
#define insl_p(port, to, len) insl(port, to, len)
/*
* DMA-consistent mapping functions. These allocate/free a region of
* uncached, unwrite-buffered mapped memory space for use with DMA
* devices. This is the "generic" version. The PCI specific version
* is in pci.h
*/
extern void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle);
extern void consistent_free(void *vaddr, size_t size, dma_addr_t handle);
extern void consistent_sync(void *vaddr, size_t size, int rw);
/*
* String version of IO memory access ops:
*/
extern void _memcpy_fromio(void *, unsigned long, size_t);
extern void _memcpy_toio(unsigned long, const void *, size_t);
extern void _memset_io(unsigned long, int, size_t);
extern void __readwrite_bug(const char *fn);
/*
* If this architecture has PCI memory IO, then define the read/write
* macros. These should only be used with the cookie passed from
* ioremap.
*/
#ifdef __mem_pci
#define readb(c) ({ unsigned int __v = \
__raw_readb(__mem_pci(c)); __v; })
#define readw(c) ({ unsigned int __v = \
le16_to_cpu(__raw_readw(__mem_pci(c))); __v; })
#define readl(c) ({ unsigned int __v = \
le32_to_cpu(__raw_readl(__mem_pci(c))); __v; })
#define writeb(v, c) __raw_writeb(v, __mem_pci(c))
#define writew(v, c) __raw_writew(cpu_to_le16(v), __mem_pci(c))
#define writel(v, c) __raw_writel(cpu_to_le32(v), __mem_pci(c))
#define memset_io(c, v, l) _memset_io(__mem_pci(c), (v), (l))
#define memcpy_fromio(a, c, l) _memcpy_fromio((a), __mem_pci(c), (l))
#define memcpy_toio(c, a, l) _memcpy_toio(__mem_pci(c), (a), (l))
#define eth_io_copy_and_sum(s, c, l, b) \
eth_copy_and_sum((s), __mem_pci(c), (l), (b))
static inline int
check_signature(unsigned long io_addr, const unsigned char *signature,
int length)
{
int retval = 0;
do {
if (readb(io_addr) != *signature)
goto out;
io_addr++;
signature++;
length--;
} while (length);
retval = 1;
out:
return retval;
}
#endif /* __mem_pci */
/*
* If this architecture has ISA IO, then define the isa_read/isa_write
* macros.
*/
#ifdef __mem_isa
#define isa_readb(addr) __raw_readb(__mem_isa(addr))
#define isa_readw(addr) __raw_readw(__mem_isa(addr))
#define isa_readl(addr) __raw_readl(__mem_isa(addr))
#define isa_writeb(val, addr) __raw_writeb(val, __mem_isa(addr))
#define isa_writew(val, addr) __raw_writew(val, __mem_isa(addr))
#define isa_writel(val, addr) __raw_writel(val, __mem_isa(addr))
#define isa_memset_io(a, b, c) _memset_io(__mem_isa(a), (b), (c))
#define isa_memcpy_fromio(a, b, c) _memcpy_fromio((a), __mem_isa(b), (c))
#define isa_memcpy_toio(a, b, c) _memcpy_toio(__mem_isa((a)), (b), (c))
#define isa_eth_io_copy_and_sum(a, b, c, d) \
eth_copy_and_sum((a), __mem_isa(b), (c), (d))
static inline int
isa_check_signature(unsigned long io_addr, const unsigned char *signature,
int length)
{
int retval = 0;
do {
if (isa_readb(io_addr) != *signature)
goto out;
io_addr++;
signature++;
length--;
} while (length);
retval = 1;
out:
return retval;
}
#else /* __mem_isa */
#define isa_readb(addr) (__readwrite_bug("isa_readb"), 0)
#define isa_readw(addr) (__readwrite_bug("isa_readw"), 0)
#define isa_readl(addr) (__readwrite_bug("isa_readl"), 0)
#define isa_writeb(val, addr) __readwrite_bug("isa_writeb")
#define isa_writew(val, addr) __readwrite_bug("isa_writew")
#define isa_writel(val, addr) __readwrite_bug("isa_writel")
#define isa_memset_io(a, b, c) __readwrite_bug("isa_memset_io")
#define isa_memcpy_fromio(a, b, c) __readwrite_bug("isa_memcpy_fromio")
#define isa_memcpy_toio(a, b, c) __readwrite_bug("isa_memcpy_toio")
#define isa_eth_io_copy_and_sum(a, b, c, d) \
__readwrite_bug("isa_eth_io_copy_and_sum")
#define isa_check_signature(io, sig, len) (0)
#endif /* __mem_isa */
#include <asm-generic/io.h>
#endif /* __KERNEL__ */
#endif /* __ASM_NDS_IO_H */

11
arch/nds32/include/asm/linkage.h
View File

@ -1,11 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* U-Boot - linkage.h
*
* Copyright (c) 2005-2007 Analog Devices Inc.
*/
#ifndef __ASM_LINKAGE_H
#define __ASM_LINKAGE_H
#endif

30
arch/nds32/include/asm/mach-types.h
View File

@ -1,30 +0,0 @@
/*
* This was automagically generated from arch/nds/tools/mach-types!
* Do NOT edit
*/
#ifndef __ASM_NDS32_MACH_TYPE_H
#define __ASM_NDS32_MACH_TYPE_H
#ifndef __ASSEMBLY__
/* The type of machine we're running on */
extern unsigned int __machine_arch_type;
#endif
/* see arch/arm/kernel/arch.c for a description of these */
#define MACH_TYPE_ADPAG101P 1
#define MACH_TYPE_ADPAE3XX 2
#ifdef CONFIG_ARCH_ADPAG101P
# ifdef machine_arch_type
# undef machine_arch_type
# define machine_arch_type __machine_arch_type
# else
# define machine_arch_type MACH_TYPE_ADPAG101P
# endif
# define machine_is_adpag101p() (machine_arch_type == MACH_TYPE_ADPAG101P)
#else
# define machine_is_adpag101p() (1)
#endif
#endif /* __ASM_NDS32_MACH_TYPE_H */

79
arch/nds32/include/asm/macro.h
View File

@ -1,79 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* include/asm-nds32/macro.h
*
* Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Copyright (C) 2011 Andes Technology Corporation
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
#ifndef __ASM_NDS_MACRO_H
#define __ASM_NDS_MACRO_H
#ifdef __ASSEMBLY__
/*
* These macros provide a convenient way to write 8, 16 and 32 bit data
* to an "immediate address (address used by periphal)" only.
* Registers r4 and r5 are used, any data in these registers are
* overwritten by the macros.
* The macros are valid for any NDS32 architecture, they do not implement
* any memory barriers so caution is recommended when using these when the
* caches are enabled or on a multi-core system.
*/
.macro write32, addr, data
li $r4, \addr
li $r5, \data
swi $r5, [$r4]
.endm
.macro write16, addr, data
li $r4, \addr
li $r5, \data
shi $r5, [$r4]
.endm
.macro write8, addr, data
li $r4, \addr
li $r5, \data
sbi $r5, [$r4]
.endm
/*
* This macro read a value from a register, then do OR operation
* (set bit fields) to the value, and then store it back to the register.
* Note: Instruction 'ori' supports immediate value up to 15 bits.
*/
.macro setbf32, addr, data
li $r4, \addr
lwi $r5, [$r4]
li $r6, \data
or $r5, $r5, $r6
swi $r5, [$r4]
.endm
.macro setbf15, addr, data
li $r4, \addr
lwi $r5, [$r4]
ori $r5, $r5, \data
swi $r5, [$r4]
.endm
/*
* This macro generates a loop that can be used for delays in the code.
* Register r4 is used, any data in this register is overwritten by the
* macro.
* The macro is valid for any NDS32 architeture. The actual time spent in the
* loop will vary from CPU to CPU though.
*/
.macro wait_timer, time
li $r4, \time
1:
nop
addi $r4, $r4, -1
bnez $r4, 1b
.endm
#endif /* __ASSEMBLY__ */
#endif /* __ASM_ARM_MACRO_H */

88
arch/nds32/include/asm/posix_types.h
View File

@ -1,88 +0,0 @@
/*
* linux/include/asm-arm/posix_types.h
*
* Copyright (C) 1996-1998 Russell King.
*
* Copyright (C) 2011 Andes Technology Corporation
* Copyright (C) 2010 Shawn Lin (nobuhiro@andestech.com)
* Copyright (C) 2011 Macpaul Lin (macpaul@andestech.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
* 27-06-1996 RMK Created
* 05-03-2010 Modified for arch NDS32
*/
#ifndef __ARCH_NDS_POSIX_TYPES_H
#define __ARCH_NDS_POSIX_TYPES_H
/*
* This file is generally used by user-level software, so you need to
* be a little careful about namespace pollution etc. Also, we cannot
* assume GCC is being used.
*/
typedef unsigned short __kernel_dev_t;
typedef unsigned long __kernel_ino_t;
typedef unsigned short __kernel_mode_t;
typedef unsigned short __kernel_nlink_t;
typedef long __kernel_off_t;
typedef int __kernel_pid_t;
typedef unsigned short __kernel_ipc_pid_t;
typedef unsigned short __kernel_uid_t;
typedef unsigned short __kernel_gid_t;
#ifdef __GNUC__
typedef __SIZE_TYPE__ __kernel_size_t;
#else
typedef unsigned int __kernel_size_t;
#endif
typedef int __kernel_ssize_t;
typedef int __kernel_ptrdiff_t;
typedef long __kernel_time_t;
typedef long __kernel_suseconds_t;
typedef long __kernel_clock_t;
typedef int __kernel_daddr_t;
typedef char *__kernel_caddr_t;
typedef unsigned short __kernel_uid16_t;
typedef unsigned short __kernel_gid16_t;
typedef unsigned int __kernel_uid32_t;
typedef unsigned int __kernel_gid32_t;
typedef unsigned short __kernel_old_uid_t;
typedef unsigned short __kernel_old_gid_t;
#ifdef __GNUC__
typedef long long __kernel_loff_t;
#endif
typedef struct {
#if defined(__KERNEL__) || defined(__USE_ALL)
int val[2];
#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
int __val[2];
#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
} __kernel_fsid_t;
#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
#undef __FD_SET
#define __FD_SET(fd, fdsetp) \
(((fd_set *)fdsetp)->fds_bits[fd >> 5] |= (1<<(fd & 31)))
#undef __FD_CLR
#define __FD_CLR(fd, fdsetp) \
(((fd_set *)fdsetp)->fds_bits[fd >> 5] &= ~(1<<(fd & 31)))
#undef __FD_ISSET
#define __FD_ISSET(fd, fdsetp) \
((((fd_set *)fdsetp)->fds_bits[fd >> 5] & (1<<(fd & 31))) != 0)
#undef __FD_ZERO
#define __FD_ZERO(fdsetp) \
(memset(fdsetp, 0, sizeof(*(fd_set *) fdsetp)))
#endif
#endif /* __ARCH_NDS_POSIX_TYPES_H */

25
arch/nds32/include/asm/processor.h
View File

@ -1,25 +0,0 @@
/*
* linux/include/asm-arm/processor.h
*
* Copyright (C) 1995-2002 Russell King
*
* Copyright (C) 2011 Andes Technology Corporation
* Copyright (C) 2010 Shawn Lin (nobuhiro@andestech.com)
* Copyright (C) 2011 Macpaul Lin (macpaul@andestech.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_NDS_PROCESSOR_H
#define __ASM_NDS_PROCESSOR_H
/**************************************************************
* CAUTION:
* - do not implement for NDS32 Arch yet.
* - so far some files include /asm/processor.h, but
* no one uses the macros defined in this head file.
**************************************************************/
#endif /* __ASM_ARM_PROCESSOR_H */

90
arch/nds32/include/asm/ptrace.h
View File

@ -1,90 +0,0 @@
/*
* Copyright (C) 2011 Andes Technology Corporation
* Copyright (C) 2010 Shawn Lin (nobuhiro@andestech.com)
* Copyright (C) 2011 Macpaul Lin (macpaul@andestech.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_NDS_PTRACE_H
#define __ASM_NDS_PTRACE_H
#define USR_MODE 0x00
#define SU_MODE 0x01
#define HV_MODE 0x10
#define MODE_MASK (0x03<<3)
#define GIE_BIT 0x01
#ifndef __ASSEMBLY__
/* this struct defines the way the registers are stored on the
stack during a system call. */
#define NDS32_REG long
struct pt_regs {
NDS32_REG ir0;
NDS32_REG ipsw;
NDS32_REG ipc;
NDS32_REG sp;
NDS32_REG orig_r0;
NDS32_REG pipsw;
NDS32_REG pipc;
NDS32_REG pp0;
NDS32_REG pp1;
NDS32_REG d0hi;
NDS32_REG d0lo;
NDS32_REG d1hi;
NDS32_REG d1lo;
NDS32_REG r[26]; /* r0 - r25 */
NDS32_REG p0; /* r26 - used by OS */
NDS32_REG p1; /* r27 - used by OS */
NDS32_REG fp; /* r28 */
NDS32_REG gp; /* r29 */
NDS32_REG lp; /* r30 */
NDS32_REG fucop_ctl;
NDS32_REG osp;
};
#define processor_mode(regs) \
(((regs)->ipsw & MODE_MASK) >> 3)
#define interrupts_enabled(regs) \
((regs)->ipsw & GIE_BIT)
/*
* Offsets used by 'ptrace' system call interface.
* These can't be changed without breaking binary compatibility
* with MkLinux, etc.
*/
#define PT_R0 0
#define PT_R1 1
#define PT_R2 2
#define PT_R3 3
#define PT_R4 4
#define PT_R5 5
#define PT_R6 6
#define PT_R7 7
#define PT_R8 8
#define PT_R9 9
#define PT_R10 10
#define PT_R11 11
#define PT_R12 12
#define PT_R13 13
#define PT_R14 14
#define PT_R15 15
#define PT_R16 16
#define PT_R17 17
#define PT_R18 18
#define PT_R19 19
#define PT_R20 20
#define PT_R21 21
#define PT_R22 22
#define PT_R23 23
#define PT_R24 24
#define PT_R25 25
#endif /* __ASSEMBLY__ */
#endif /* __ASM_NDS_PTRACE_H */

11
arch/nds32/include/asm/sections.h
View File

@ -1,11 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (c) 2012 The Chromium OS Authors.
*/
#ifndef __ASM_NDS32_SECTIONS_H
#define __ASM_NDS32_SECTIONS_H
#include <asm-generic/sections.h>
#endif

189
arch/nds32/include/asm/setup.h
View File

@ -1,189 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* linux/arch/nds32/include/asm/setup.h
*
* Copyright (C) 1997-1999 Russell King
* Copyright (C) 2008 Andes Technology Corporation
* Copyright (C) 2013 Ken Kuo (ken_kuo@andestech.com)
*
* Structure passed to kernel to tell it about the
* hardware it's running on. See Documentation/arm/Setup
* for more info.
*/
#ifndef __ASMNDS32_SETUP_H
#define __ASMNDS32_SETUP_H
#define COMMAND_LINE_SIZE 256
/* The list ends with an ATAG_NONE node. */
#define ATAG_NONE 0x00000000
struct tag_header {
u32 size;
u32 tag;
};
/* The list must start with an ATAG_CORE node */
#define ATAG_CORE 0x54410001
struct tag_core {
u32 flags; /* bit 0 = read-only */
u32 pagesize;
u32 rootdev;
};
/* it is allowed to have multiple ATAG_MEM nodes */
#define ATAG_MEM 0x54410002
struct tag_mem32 {
u32 size;
u32 start; /* physical start address */
};
/* VGA text type displays */
#define ATAG_VIDEOTEXT 0x54410003
struct tag_videotext {
u8 x;
u8 y;
u16 video_page;
u8 video_mode;
u8 video_cols;
u16 video_ega_bx;
u8 video_lines;
u8 video_isvga;
u16 video_points;
};
/* describes how the ramdisk will be used in kernel */
#define ATAG_RAMDISK 0x54410004
struct tag_ramdisk {
u32 flags; /* bit 0 = load, bit 1 = prompt */
u32 size; /* decompressed ramdisk size in _kilo_ bytes */
u32 start; /* starting block of floppy-based RAM disk image */
};
/*
* this one accidentally used virtual addresses - as such,
* it's deprecated.
* describes where the compressed ramdisk image lives (virtual address)
*/
#define ATAG_INITRD 0x54410005
/* describes where the compressed ramdisk image lives (physical address) */
#define ATAG_INITRD2 0x54420005
struct tag_initrd {
u32 start; /* physical start address */
u32 size; /* size of compressed ramdisk image in bytes */
};
/* board serial number. "64 bits should be enough for everybody" */
#define ATAG_SERIAL 0x54410006
struct tag_serialnr {
u32 low;
u32 high;
};
/* board revision */
#define ATAG_REVISION 0x54410007
struct tag_revision {
u32 rev;
};
/* initial values for vesafb-type framebuffers. see struct screen_info
* in include/linux/tty.h
*/
#define ATAG_VIDEOLFB 0x54410008
struct tag_videolfb {
u16 lfb_width;
u16 lfb_height;
u16 lfb_depth;
u16 lfb_linelength;
u32 lfb_base;
u32 lfb_size;
u8 red_size;
u8 red_pos;
u8 green_size;
u8 green_pos;
u8 blue_size;
u8 blue_pos;
u8 rsvd_size;
u8 rsvd_pos;
};
/* command line: \0 terminated string */
#define ATAG_CMDLINE 0x54410009
struct tag_cmdline {
char cmdline[COMMAND_LINE_SIZE];
};
struct tag {
struct tag_header hdr;
union {
struct tag_core core;
struct tag_mem32 mem;
struct tag_videotext videotext;
struct tag_ramdisk ramdisk;
struct tag_initrd initrd;
struct tag_serialnr serialnr;
struct tag_revision revision;
struct tag_videolfb videolfb;
struct tag_cmdline cmdline;
} u;
};
struct tagtable {
u32 tag;
int (*parse)(const struct tag *);
};
#define tag_member_present(tag, member) \
((unsigned long)(&((struct tag *)0L)->member + 1) \
<= (tag)->hdr.size * 4)
#define tag_next(t) ((struct tag *)((u32 *)(t) + (t)->hdr.size))
#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
#define for_each_tag(t, base) \
for (t = base; t->hdr.size; t = tag_next(t))
#ifdef __KERNEL__
#define __tag __used __section(".taglist")
#define __tagtable(tag, fn) \
static struct tagtable __tagtable_##fn __tag = { tag, fn }
/*
* Memory map description
*/
#define NR_BANKS 8
struct meminfo {
int nr_banks;
struct {
unsigned long start;
unsigned long size;
int node;
} bank[NR_BANKS];
};
/*
* Early command line parameters.
*/
struct early_params {
const char *arg;
void (*fn)(char **p);
};
#define __early_param(name, fn) \
static struct early_params __early_##fn __used \
__section("__early_param") = { name, fn }
#endif
#endif

0
arch/nds32/include/asm/spl.h
View File

57
arch/nds32/include/asm/string.h
View File

@ -1,57 +0,0 @@
/*
* Copyright (C) 2011 Andes Technology Corporation
* Copyright (C) 2010 Shawn Lin (nobuhiro@andestech.com)
* Copyright (C) 2011 Macpaul Lin (macpaul@andestech.com)
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#ifndef __ASM_NDS_STRING_H
#define __ASM_NDS_STRING_H
/*
* We don't do inline string functions, since the
* optimised inline asm versions are not small.
*/
#undef __HAVE_ARCH_STRRCHR
extern char *strrchr(const char *s, int c);
#undef __HAVE_ARCH_STRCHR
extern char *strchr(const char *s, int c);
#undef __HAVE_ARCH_MEMCPY
extern void *memcpy(void *, const void *, __kernel_size_t);
#undef __HAVE_ARCH_MEMMOVE
extern void *memmove(void *, const void *, __kernel_size_t);
#undef __HAVE_ARCH_MEMCHR
extern void *memchr(const void *, int, __kernel_size_t);
#undef __HAVE_ARCH_MEMZERO
#undef __HAVE_ARCH_MEMSET
extern void *memset(void *, int, __kernel_size_t);
#ifdef CONFIG_MARCO_MEMSET
extern void __memzero(void *ptr, __kernel_size_t n);
#define memset(p, v, n) \
({ \
if ((n) != 0) { \
if (__builtin_constant_p((v)) && (v) == 0) \
__memzero((p), (n)); \
else \
memset((p), (v), (n)); \
} \
(p); \
})
#define memzero(p, n) ({ if ((n) != 0) __memzero((p), (n)); (p); })
#else
extern void memzero(void *ptr, __kernel_size_t n);
#endif
#endif /* __ASM_NDS_STRING_H */

71
arch/nds32/include/asm/system.h
View File

@ -1,71 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2011 Andes Technology Corporation
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
#ifndef __ASM_NDS_SYSTEM_H
#define __ASM_NDS_SYSTEM_H
/*
* Interrupt configuring macros.
*/
extern int irq_flags;
#define local_irq_enable() \
__asm__ __volatile__ ( \
"mfsr %0, $psw\n\t" \
"andi %0, %0, 0x1\n\t" \
"setgie.e\n\t" \
: \
: "r" (irq_flags) \
)
#define local_irq_disable() \
do { \
int __tmp_dummy; \
__asm__ __volatile__ ( \
"mfsr %0, $psw\n\t" \
"andi %0, %0, 0x1\n\t" \
"setgie.d\n\t" \
"dsb\n\t" \
: "=r" (__tmp_dummy) \
); \
} while (0)
#define local_irq_save(x) \
__asm__ __volatile__ ( \
"mfsr %0, $psw\n\t" \
"andi %0, %0, 0x1\n\t" \
"setgie.d\n\t" \
"dsb\n\t" \
: "=&r" (x) \
)
#define local_save_flags(x) \
__asm__ __volatile__ ( \
"mfsr %0, $psw\n\t" \
"andi %0, %0, 0x1\n\t" \
"setgie.e\n\t" \
"setgie.d\n\t" \
: "=r" (x) \
)
#define irqs_enabled_from_flags(x) ((x) != 0x1f)
#define local_irq_restore(x) \
do { \
if (irqs_enabled_from_flags(x)) \
local_irq_enable(); \
} while (0)
/*
* Force strict CPU ordering.
*/
#define nop() asm volatile ("nop;\n\t" : : )
#define mb() asm volatile ("" : : : "memory")
#define rmb() asm volatile ("" : : : "memory")
#define wmb() asm volatile ("" : : : "memory")
#endif /* __ASM_NDS_SYSTEM_H */

34
arch/nds32/include/asm/types.h
View File

@ -1,34 +0,0 @@
/*
* Copyright (C) 2011 Andes Technology Corporation
* Copyright (C) 2010 Shawn Lin (nobuhiro@andestech.com)
* Copyright (C) 2011 Macpaul Lin (macpaul@andestech.com)
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#ifndef __ASM_NDS_TYPES_H
#define __ASM_NDS_TYPES_H
#include <asm-generic/int-ll64.h>
typedef unsigned short umode_t;
/*
* These aren't exported outside the kernel to avoid name space clashes
*/
#ifdef __KERNEL__
#define BITS_PER_LONG 32
#include <stddef.h>
typedef u32 dma_addr_t;
typedef unsigned long phys_addr_t;
typedef unsigned long phys_size_t;
#endif /* __KERNEL__ */
#endif

30
arch/nds32/include/asm/u-boot-nds32.h
View File

@ -1,30 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
#ifndef _U_BOOT_NDS32_H_
#define _U_BOOT_NDS32_H_ 1
#include <linux/types.h>
/* for the following variables, see start.S */
extern ulong IRQ_STACK_START; /* top of IRQ stack */
extern ulong FIQ_STACK_START; /* top of FIQ stack */
/* cpu/.../cpu.c */
int cleanup_before_linux(void);
/* board/.../... */
int board_init(void);
/* cpu/.../interrupt.c */
void reset_timer_masked(void);
#endif /* _U_BOOT_NDS32_H_ */

29
arch/nds32/include/asm/u-boot.h
View File

@ -1,29 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* Copyright (C) 2011 Andes Technology Corporation
* Copyright (C) 2010 Shawn Lin (nobuhiro@andestech.com)
* Copyright (C) 2011 Macpaul Lin (macpaul@andestech.com)
*
********************************************************************
* NOTE: This header file defines an interface to U-Boot. Including
* this (unmodified) header file in another file is considered normal
* use of U-Boot, and does *not* fall under the heading of "derived
* work".
********************************************************************
*/
#ifndef _U_BOOT_H_
#define _U_BOOT_H_ 1
/* Use the generic board which requires a unified bd_info */
#include <asm-generic/u-boot.h>
#include <asm/u-boot-nds32.h>
/* For image.h:image_check_target_arch() */
#define IH_ARCH_DEFAULT IH_ARCH_NDS32
#endif /* _U_BOOT_H_ */

1
arch/nds32/include/asm/unaligned.h
View File

@ -1 +0,0 @@
#include <asm-generic/unaligned.h>

13
arch/nds32/lib/Makefile
View File

@ -1,13 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# Copyright (C) 2011 Andes Technology Corporation
# Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
obj-y += cache.o
obj-$(CONFIG_CMD_BOOTM) += bootm.o
obj-$(CONFIG_CMD_GO) += boot.o
obj-y += interrupts.o

82
arch/nds32/lib/asm-offsets.c
View File

@ -1,82 +0,0 @@
/*
* Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c
*
* Generate definitions needed by assembly language modules.
* This code generates raw asm output which is post-processed to extract
* and format the required data.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <common.h>
#include <linux/kbuild.h>
int main(void)
{
/*
* TODO : Check if each entry in this file is really necessary.
* - struct ftahbc02s
* - struct ftsdmc021
* - struct andes_pcu
* - struct dwcddr21mctl
* are used only for generating asm-offsets.h.
* It means their offset addresses are referenced only from assembly
* code. Is it better to define the macros directly in headers?
*/
#ifdef CONFIG_FTSMC020
OFFSET(FTSMC020_BANK0_CR, ftsmc020, bank[0].cr);
OFFSET(FTSMC020_BANK0_TPR, ftsmc020, bank[0].tpr);
#endif
BLANK();
#ifdef CONFIG_FTAHBC020S
OFFSET(FTAHBC020S_SLAVE_BSR_4, ftahbc02s, s_bsr[4]);
OFFSET(FTAHBC020S_SLAVE_BSR_6, ftahbc02s, s_bsr[6]);
OFFSET(FTAHBC020S_CR, ftahbc02s, cr);
#endif
BLANK();
#ifdef CONFIG_FTPMU010
OFFSET(FTPMU010_PDLLCR0, ftpmu010, PDLLCR0);
#endif
BLANK();
#ifdef CONFIG_FTSDMC021
OFFSET(FTSDMC021_TP1, ftsdmc021, tp1);
OFFSET(FTSDMC021_TP2, ftsdmc021, tp2);
OFFSET(FTSDMC021_CR1, ftsdmc021, cr1);
OFFSET(FTSDMC021_CR2, ftsdmc021, cr2);
OFFSET(FTSDMC021_BANK0_BSR, ftsdmc021, bank0_bsr);
OFFSET(FTSDMC021_BANK1_BSR, ftsdmc021, bank1_bsr);
OFFSET(FTSDMC021_BANK2_BSR, ftsdmc021, bank2_bsr);
OFFSET(FTSDMC021_BANK3_BSR, ftsdmc021, bank3_bsr);
#endif
BLANK();
#ifdef CONFIG_ANDES_PCU
OFFSET(ANDES_PCU_PCS4, andes_pcu, pcs4.parm); /* 0x104 */
#endif
BLANK();
#ifdef CONFIG_DWCDDR21MCTL
OFFSET(DWCDDR21MCTL_CCR, dwcddr21mctl, ccr); /* 0x04 */
OFFSET(DWCDDR21MCTL_DCR, dwcddr21mctl, dcr); /* 0x04 */
OFFSET(DWCDDR21MCTL_IOCR, dwcddr21mctl, iocr); /* 0x08 */
OFFSET(DWCDDR21MCTL_CSR, dwcddr21mctl, csr); /* 0x0c */
OFFSET(DWCDDR21MCTL_DRR, dwcddr21mctl, drr); /* 0x10 */
OFFSET(DWCDDR21MCTL_DLLCR0, dwcddr21mctl, dllcr[0]); /* 0x24 */
OFFSET(DWCDDR21MCTL_DLLCR1, dwcddr21mctl, dllcr[1]); /* 0x28 */
OFFSET(DWCDDR21MCTL_DLLCR2, dwcddr21mctl, dllcr[2]); /* 0x2c */
OFFSET(DWCDDR21MCTL_DLLCR3, dwcddr21mctl, dllcr[3]); /* 0x30 */
OFFSET(DWCDDR21MCTL_DLLCR4, dwcddr21mctl, dllcr[4]); /* 0x34 */
OFFSET(DWCDDR21MCTL_DLLCR5, dwcddr21mctl, dllcr[5]); /* 0x38 */
OFFSET(DWCDDR21MCTL_DLLCR6, dwcddr21mctl, dllcr[6]); /* 0x3c */
OFFSET(DWCDDR21MCTL_DLLCR7, dwcddr21mctl, dllcr[7]); /* 0x40 */
OFFSET(DWCDDR21MCTL_DLLCR8, dwcddr21mctl, dllcr[8]); /* 0x44 */
OFFSET(DWCDDR21MCTL_DLLCR9, dwcddr21mctl, dllcr[9]); /* 0x48 */
OFFSET(DWCDDR21MCTL_RSLR0, dwcddr21mctl, rslr[0]); /* 0x4c */
OFFSET(DWCDDR21MCTL_RDGR0, dwcddr21mctl, rdgr[0]); /* 0x5c */
OFFSET(DWCDDR21MCTL_DTAR, dwcddr21mctl, dtar); /* 0xa4 */
OFFSET(DWCDDR21MCTL_MR, dwcddr21mctl, mr); /* 0x1f0 */
#endif
return 0;
}

17
arch/nds32/lib/boot.c
View File

@ -1,17 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2011 Andes Technology Corporation
* Rick Chen, Andes Technology Corporation <rick@andestech.com>
*/
#include <common.h>
#include <command.h>
unsigned long do_go_exec(ulong (*entry)(int, char * const []),
int argc, char *const argv[])
{
cleanup_before_linux();
return entry(argc, argv);
}

248
arch/nds32/lib/bootm.c
View File

@ -1,248 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
#include <common.h>
#include <bootstage.h>
#include <command.h>
#include <env.h>
#include <hang.h>
#include <image.h>
#include <log.h>
#include <asm/global_data.h>
#include <u-boot/zlib.h>
#include <asm/byteorder.h>
#include <asm/bootm.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SUPPORT_PASSING_ATAGS
static void setup_start_tag(struct bd_info *bd);
# ifdef CONFIG_SETUP_MEMORY_TAGS
static void setup_memory_tags(struct bd_info *bd);
# endif
static void setup_commandline_tag(struct bd_info *bd, char *commandline);
# ifdef CONFIG_INITRD_TAG
static void setup_initrd_tag(struct bd_info *bd, ulong initrd_start,
ulong initrd_end);
# endif
static void setup_end_tag(struct bd_info *bd);
static struct tag *params;
#endif /* CONFIG_SUPPORT_PASSING_ATAGS */
int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
{
struct bd_info *bd = gd->bd;
char *s;
int machid = bd->bi_arch_number;
void (*theKernel)(int zero, int arch, uint params);
#ifdef CONFIG_CMDLINE_TAG
char *commandline = env_get("bootargs");
#endif
/*
* allow the PREP bootm subcommand, it is required for bootm to work
*/
if (flag & BOOTM_STATE_OS_PREP)
return 0;
if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
return 1;
theKernel = (void (*)(int, int, uint))images->ep;
s = env_get("machid");
if (s) {
machid = hextoul(s, NULL);
printf("Using machid 0x%x from environment\n", machid);
}
bootstage_mark(BOOTSTAGE_ID_RUN_OS);
debug("## Transferring control to Linux (at address %08lx) ...\n",
(ulong)theKernel);
if (CONFIG_IS_ENABLED(OF_LIBFDT) && images->ft_len) {
#ifdef CONFIG_OF_LIBFDT
debug("using: FDT\n");
if (image_setup_linux(images)) {
printf("FDT creation failed! hanging...");
hang();
}
#endif
} else if (BOOTM_ENABLE_TAGS) {
#ifdef CONFIG_SUPPORT_PASSING_ATAGS
setup_start_tag(bd);
#ifdef CONFIG_SERIAL_TAG
setup_serial_tag(&params);
#endif
#ifdef CONFIG_REVISION_TAG
setup_revision_tag(&params);
#endif
#ifdef CONFIG_SETUP_MEMORY_TAGS
setup_memory_tags(bd);
#endif
#ifdef CONFIG_CMDLINE_TAG
setup_commandline_tag(bd, commandline);
#endif
#ifdef CONFIG_INITRD_TAG
if (images->rd_start && images->rd_end)
setup_initrd_tag(bd, images->rd_start, images->rd_end);
#endif
setup_end_tag(bd);
#endif
/* we assume that the kernel is in place */
printf("\nStarting kernel ...\n\n");
#ifdef CONFIG_USB_DEVICE
{
extern void udc_disconnect(void);
udc_disconnect();
}
#endif
}
cleanup_before_linux();
if (CONFIG_IS_ENABLED(OF_LIBFDT) && images->ft_len)
theKernel(0, machid, (unsigned long)images->ft_addr);
else
theKernel(0, machid, bd->bi_boot_params);
/* does not return */
return 1;
}
#ifdef CONFIG_SUPPORT_PASSING_ATAGS
static void setup_start_tag(struct bd_info *bd)
{
params = (struct tag *)bd->bi_boot_params;
params->hdr.tag = ATAG_CORE;
params->hdr.size = tag_size(tag_core);
params->u.core.flags = 0;
params->u.core.pagesize = 0;
params->u.core.rootdev = 0;
params = tag_next(params);
}
#ifdef CONFIG_SETUP_MEMORY_TAGS
static void setup_memory_tags(struct bd_info *bd)
{
int i;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
params->hdr.tag = ATAG_MEM;
params->hdr.size = tag_size(tag_mem32);
params->u.mem.start = bd->bi_dram[i].start;
params->u.mem.size = bd->bi_dram[i].size;
params = tag_next(params);
}
}
#endif /* CONFIG_SETUP_MEMORY_TAGS */
static void setup_commandline_tag(struct bd_info *bd, char *commandline)
{
char *p;
if (!commandline)
return;
/* eat leading white space */
for (p = commandline; *p == ' '; p++)
;
/* skip non-existent command lines so the kernel will still
* use its default command line.
*/
if (*p == '\0')
return;
params->hdr.tag = ATAG_CMDLINE;
params->hdr.size =
(sizeof(struct tag_header) + strlen(p) + 1 + 4) >> 2;
strcpy(params->u.cmdline.cmdline, p)
;
params = tag_next(params);
}
#ifdef CONFIG_INITRD_TAG
static void setup_initrd_tag(struct bd_info *bd, ulong initrd_start,
ulong initrd_end)
{
/* an ATAG_INITRD node tells the kernel where the compressed
* ramdisk can be found. ATAG_RDIMG is a better name, actually.
*/
params->hdr.tag = ATAG_INITRD2;
params->hdr.size = tag_size(tag_initrd);
params->u.initrd.start = initrd_start;
params->u.initrd.size = initrd_end - initrd_start;
params = tag_next(params);
}
#endif /* CONFIG_INITRD_TAG */
#ifdef CONFIG_SERIAL_TAG
void setup_serial_tag(struct tag **tmp)
{
struct tag *params = *tmp;
struct tag_serialnr serialnr;
void get_board_serial(struct tag_serialnr *serialnr);
get_board_serial(&serialnr);
params->hdr.tag = ATAG_SERIAL;
params->hdr.size = tag_size(tag_serialnr);
params->u.serialnr.low = serialnr.low;
params->u.serialnr.high = serialnr.high;
params = tag_next(params);
*tmp = params;
}
#endif
#ifdef CONFIG_REVISION_TAG
void setup_revision_tag(struct tag **in_params)
{
u32 rev = 0;
u32 get_board_rev(void);
rev = get_board_rev();
params->hdr.tag = ATAG_REVISION;
params->hdr.size = tag_size(tag_revision);
params->u.revision.rev = rev;
params = tag_next(params);
}
#endif /* CONFIG_REVISION_TAG */
static void setup_end_tag(struct bd_info *bd)
{
params->hdr.tag = ATAG_NONE;
params->hdr.size = 0;
}
#endif /* CONFIG_SUPPORT_PASSING_ATAGS */
static ulong get_sp(void)
{
ulong ret;
asm("move %0, $sp" : "=r"(ret) : );
return ret;
}
void arch_lmb_reserve(struct lmb *lmb)
{
arch_lmb_reserve_generic(lmb, get_sp(), gd->ram_top, 4096);
}

268
arch/nds32/lib/cache.c
View File

@ -1,268 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2012 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
#include <common.h>
#include <cpu_func.h>
#if !(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
#include <asm/cache.h>
static inline unsigned long CACHE_SET(unsigned char cache)
{
if (cache == ICACHE)
return 64 << ((GET_ICM_CFG() & ICM_CFG_MSK_ISET) \
>> ICM_CFG_OFF_ISET);
else
return 64 << ((GET_DCM_CFG() & DCM_CFG_MSK_DSET) \
>> DCM_CFG_OFF_DSET);
}
static inline unsigned long CACHE_WAY(unsigned char cache)
{
if (cache == ICACHE)
return 1 + ((GET_ICM_CFG() & ICM_CFG_MSK_IWAY) \
>> ICM_CFG_OFF_IWAY);
else
return 1 + ((GET_DCM_CFG() & DCM_CFG_MSK_DWAY) \
>> DCM_CFG_OFF_DWAY);
}
static inline unsigned long CACHE_LINE_SIZE(enum cache_t cache)
{
if (cache == ICACHE)
return 8 << (((GET_ICM_CFG() & ICM_CFG_MSK_ISZ) \
>> ICM_CFG_OFF_ISZ) - 1);
else
return 8 << (((GET_DCM_CFG() & DCM_CFG_MSK_DSZ) \
>> DCM_CFG_OFF_DSZ) - 1);
}
#endif
#if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
void invalidate_icache_all(void)
{
unsigned long end, line_size;
line_size = CACHE_LINE_SIZE(ICACHE);
end = line_size * CACHE_WAY(ICACHE) * CACHE_SET(ICACHE);
do {
end -= line_size;
__asm__ volatile ("\n\tcctl %0, L1I_IX_INVAL" : : "r" (end));
end -= line_size;
__asm__ volatile ("\n\tcctl %0, L1I_IX_INVAL" : : "r" (end));
end -= line_size;
__asm__ volatile ("\n\tcctl %0, L1I_IX_INVAL" : : "r" (end));
end -= line_size;
__asm__ volatile ("\n\tcctl %0, L1I_IX_INVAL" : : "r" (end));
} while (end > 0);
}
void invalidate_icache_range(unsigned long start, unsigned long end)
{
unsigned long line_size;
line_size = CACHE_LINE_SIZE(ICACHE);
while (end > start) {
asm volatile (
"\n\tcctl %0, L1I_VA_INVAL"
:
: "r"(start)
);
start += line_size;
}
}
void icache_enable(void)
{
asm volatile (
"mfsr $p0, $mr8\n\t"
"ori $p0, $p0, 0x01\n\t"
"mtsr $p0, $mr8\n\t"
"isb\n\t"
);
}
void icache_disable(void)
{
asm volatile (
"mfsr $p0, $mr8\n\t"
"li $p1, ~0x01\n\t"
"and $p0, $p0, $p1\n\t"
"mtsr $p0, $mr8\n\t"
"isb\n\t"
);
}
int icache_status(void)
{
int ret;
asm volatile (
"mfsr $p0, $mr8\n\t"
"andi %0, $p0, 0x01\n\t"
: "=r" (ret)
:
: "memory"
);
return ret;
}
#else
void invalidate_icache_all(void)
{
}
void invalidate_icache_range(unsigned long start, unsigned long end)
{
}
void icache_enable(void)
{
}
void icache_disable(void)
{
}
int icache_status(void)
{
return 0;
}
#endif
#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
void dcache_wbinval_all(void)
{
unsigned long end, line_size;
line_size = CACHE_LINE_SIZE(DCACHE);
end = line_size * CACHE_WAY(DCACHE) * CACHE_SET(DCACHE);
do {
end -= line_size;
__asm__ volatile ("\n\tcctl %0, L1D_IX_WB" : : "r" (end));
__asm__ volatile ("\n\tcctl %0, L1D_IX_INVAL" : : "r" (end));
end -= line_size;
__asm__ volatile ("\n\tcctl %0, L1D_IX_WB" : : "r" (end));
__asm__ volatile ("\n\tcctl %0, L1D_IX_INVAL" : : "r" (end));
end -= line_size;
__asm__ volatile ("\n\tcctl %0, L1D_IX_WB" : : "r" (end));
__asm__ volatile ("\n\tcctl %0, L1D_IX_INVAL" : : "r" (end));
end -= line_size;
__asm__ volatile ("\n\tcctl %0, L1D_IX_WB" : : "r" (end));
__asm__ volatile ("\n\tcctl %0, L1D_IX_INVAL" : : "r" (end));
} while (end > 0);
}
void flush_dcache_range(unsigned long start, unsigned long end)
{
unsigned long line_size;
line_size = CACHE_LINE_SIZE(DCACHE);
while (end > start) {
asm volatile (
"\n\tcctl %0, L1D_VA_WB"
"\n\tcctl %0, L1D_VA_INVAL" : : "r" (start)
);
start += line_size;
}
}
void invalidate_dcache_range(unsigned long start, unsigned long end)
{
unsigned long line_size;
line_size = CACHE_LINE_SIZE(DCACHE);
while (end > start) {
asm volatile (
"\n\tcctl %0, L1D_VA_INVAL" : : "r"(start)
);
start += line_size;
}
}
void dcache_enable(void)
{
asm volatile (
"mfsr $p0, $mr8\n\t"
"ori $p0, $p0, 0x02\n\t"
"mtsr $p0, $mr8\n\t"
"isb\n\t"
);
}
void dcache_disable(void)
{
asm volatile (
"mfsr $p0, $mr8\n\t"
"li $p1, ~0x02\n\t"
"and $p0, $p0, $p1\n\t"
"mtsr $p0, $mr8\n\t"
"isb\n\t"
);
}
int dcache_status(void)
{
int ret;
asm volatile (
"mfsr $p0, $mr8\n\t"
"andi %0, $p0, 0x02\n\t"
: "=r" (ret)
:
: "memory"
);
return ret;
}
#else
void dcache_wbinval_all(void)
{
}
void flush_dcache_range(unsigned long start, unsigned long end)
{
}
void invalidate_dcache_range(unsigned long start, unsigned long end)
{
}
void dcache_enable(void)
{
}
void dcache_disable(void)
{
}
int dcache_status(void)
{
return 0;
}
#endif
void flush_dcache_all(void)
{
dcache_wbinval_all();
}
void cache_flush(void)
{
flush_dcache_all();
invalidate_icache_all();
}
void flush_cache(unsigned long addr, unsigned long size)
{
flush_dcache_range(addr, addr + size);
invalidate_icache_range(addr, addr + size);
}

118
arch/nds32/lib/interrupts.c
View File

@ -1,118 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Alex Zuepke <azu@sysgo.de>
*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
#include <common.h>
#include <cpu_func.h>
#include <irq_func.h>
#include <asm/ptrace.h>
#include <asm/system.h>
#undef INTERRUPT_MODE
static int int_flag;
int irq_flags; /* needed by asm-nds32/system.h */
int GIE_STATUS(void)
{
int ret;
__asm__ __volatile__ (
"mfsr $p0, $psw\n\t"
"andi %0, %0, 0x1\n\t"
: "=r" (ret)
:
: "memory"
);
return ret;
}
#ifdef CONFIG_USE_INTERRUPT
int interrupt_init(void)
{
return 0;
}
/* enable interrupts */
void enable_interrupts(void)
{
local_irq_restore(int_flag);
}
/*
* disable interrupts
* Return true if GIE is enabled before we disable it.
*/
int disable_interrupts(void)
{
int gie_ori_status;
gie_ori_status = GIE_STATUS();
local_irq_save(int_flag);
return gie_ori_status;
}
#endif
void bad_mode(void)
{
panic("Resetting CPU ...\n");
reset_cpu();
}
void show_regs(struct pt_regs *regs)
{
const char *processor_modes[] = {"USER", "SuperUser" , "HyperVisor"};
printf("\n");
printf("pc : [<%08lx>] sp: [<%08lx>]\n"
"lp : %08lx gp : %08lx fp : %08lx\n",
regs->ipc, regs->sp, regs->lp, regs->gp, regs->fp);
printf("D1H: %08lx D1L: %08lx D0H: %08lx D0L: %08lx\n",
regs->d1hi, regs->d1lo, regs->d0hi, regs->d0lo);
printf("r27: %08lx r26: %08lx r25: %08lx r24: %08lx\n",
regs->p1, regs->p0, regs->r[25], regs->r[24]);
printf("r23: %08lx r22: %08lx r21: %08lx r20: %08lx\n",
regs->r[23], regs->r[22], regs->r[21], regs->r[20]);
printf("r19: %08lx r18: %08lx r17: %08lx r16: %08lx\n",
regs->r[19], regs->r[18], regs->r[17], regs->r[16]);
printf("r15: %08lx r14: %08lx r13: %08lx r12: %08lx\n",
regs->r[15], regs->r[14], regs->r[13], regs->r[12]);
printf("r11: %08lx r10: %08lx r9 : %08lx r8 : %08lx\n",
regs->r[11], regs->r[10], regs->r[9], regs->r[8]);
printf("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n",
regs->r[7], regs->r[6], regs->r[5], regs->r[4]);
printf("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
regs->r[3], regs->r[2], regs->r[1], regs->r[0]);
printf(" Interrupts %s Mode %s\n",
interrupts_enabled(regs) ? "on" : "off",
processor_modes[processor_mode(regs)]);
}
void do_interruption(struct pt_regs *pt_regs, int EVIC_num)
{
const char *interruption_type[] = {
"Reset",
"TLB Fill",
"TLB Not Present",
"TLB Misc",
"VLPT Miss",
"Cache Parity Error",
"Debug",
"General Exception",
"External Interrupt"
};
printf("%s\n", interruption_type[EVIC_num]);
show_regs(pt_regs);
bad_mode();
}

18
board/AndesTech/adp-ae3xx/Kconfig
View File

@ -1,18 +0,0 @@
if TARGET_ADP_AE3XX
config SYS_CPU
default "n1213"
config SYS_BOARD
default "adp-ae3xx"
config SYS_VENDOR
default "AndesTech"
config SYS_SOC
default "ae3xx"
config SYS_CONFIG_NAME
default "adp-ae3xx"
endif

6
board/AndesTech/adp-ae3xx/MAINTAINERS
View File

@ -1,6 +0,0 @@
ADP-AG101P BOARD
M: Andes <uboot@andestech.com>
S: Maintained
F: board/AndesTech/adp-ae3xx/
F: include/configs/adp-ae3xx.h
F: configs/adp-ae3xx_defconfig

6
board/AndesTech/adp-ae3xx/Makefile
View File

@ -1,6 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (C) 2016 Andes Technology Corporation
# Rick Chen, Andes Technology Corporation <rick@andestech.com>
obj-y := adp-ae3xx.o

79
board/AndesTech/adp-ae3xx/adp-ae3xx.c
View File

@ -1,79 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
#include <init.h>
#include <net.h>
#include <asm/global_data.h>
#include <asm/mach-types.h>
#include <common.h>
#include <flash.h>
#if defined(CONFIG_FTMAC100) && !defined(CONFIG_DM_ETH)
#include <netdev.h>
#endif
#include <linux/io.h>
#include <faraday/ftsmc020.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Miscellaneous platform dependent initializations
*/
int board_init(void)
{
/*
* refer to BOOT_PARAMETER_PA_BASE within
* "linux/arch/nds32/include/asm/misc_spec.h"
*/
printf("Board: %s\n" , CONFIG_SYS_BOARD);
gd->bd->bi_arch_number = MACH_TYPE_ADPAE3XX;
gd->bd->bi_boot_params = PHYS_SDRAM_0 + 0x400;
return 0;
}
int dram_init(void)
{
unsigned long sdram_base = PHYS_SDRAM_0;
unsigned long expected_size = PHYS_SDRAM_0_SIZE + PHYS_SDRAM_1_SIZE;
unsigned long actual_size;
actual_size = get_ram_size((void *)sdram_base, expected_size);
gd->ram_size = actual_size;
if (expected_size != actual_size) {
printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
actual_size >> 20, expected_size >> 20);
}
return 0;
}
int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_0;
gd->bd->bi_dram[0].size = PHYS_SDRAM_0_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_1;
gd->bd->bi_dram[1].size = PHYS_SDRAM_1_SIZE;
return 0;
}
#if defined(CONFIG_FTMAC100) && !defined(CONFIG_DM_ETH)
int board_eth_init(struct bd_info *bd)
{
return ftmac100_initialize(bd);
}
#endif
ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
{
if (banknum == 0) { /* non-CFI boot flash */
info->portwidth = FLASH_CFI_8BIT;
info->chipwidth = FLASH_CFI_BY8;
info->interface = FLASH_CFI_X8;
return 1;
} else {
return 0;
}
}

22
board/AndesTech/adp-ag101p/Kconfig
View File

@ -1,22 +0,0 @@
if TARGET_ADP_AG101P
config DEBUG_LED
hex
default 0x902FFFFC
config SYS_CPU
default "n1213"
config SYS_BOARD
default "adp-ag101p"
config SYS_VENDOR
default "AndesTech"
config SYS_SOC
default "ag101"
config SYS_CONFIG_NAME
default "adp-ag101p"
endif

6
board/AndesTech/adp-ag101p/MAINTAINERS
View File

@ -1,6 +0,0 @@
ADP-AG101P BOARD
M: Andes <uboot@andestech.com>
S: Maintained
F: board/AndesTech/adp-ag101p/
F: include/configs/adp-ag101p.h
F: configs/adp-ag101p_defconfig

7
board/AndesTech/adp-ag101p/Makefile
View File

@ -1,7 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (C) 2011 Andes Technology Corporation
# Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
obj-y := adp-ag101p.o

86
board/AndesTech/adp-ag101p/adp-ag101p.c
View File

@ -1,86 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
#include <common.h>
#include <flash.h>
#include <init.h>
#include <net.h>
#if defined(CONFIG_FTMAC100) && !defined(CONFIG_DM_ETH)
#include <netdev.h>
#endif
#include <asm/global_data.h>
#include <linux/io.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <faraday/ftsmc020.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Miscellaneous platform dependent initializations
*/
int board_init(void)
{
/*
* refer to BOOT_PARAMETER_PA_BASE within
* "linux/arch/nds32/include/asm/misc_spec.h"
*/
printf("Board: %s\n" , CONFIG_SYS_BOARD);
gd->bd->bi_arch_number = MACH_TYPE_ADPAG101P;
gd->bd->bi_boot_params = PHYS_SDRAM_0 + 0x400;
return 0;
}
int dram_init(void)
{
unsigned long sdram_base = PHYS_SDRAM_0;
unsigned long expected_size = PHYS_SDRAM_0_SIZE + PHYS_SDRAM_1_SIZE;
unsigned long actual_size;
actual_size = get_ram_size((void *)sdram_base, expected_size);
gd->ram_size = actual_size;
if (expected_size != actual_size) {
printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
actual_size >> 20, expected_size >> 20);
}
return 0;
}
int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_0;
gd->bd->bi_dram[0].size = PHYS_SDRAM_0_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_1;
gd->bd->bi_dram[1].size = PHYS_SDRAM_1_SIZE;
return 0;
}
#if defined(CONFIG_FTMAC100) && !defined(CONFIG_DM_ETH)
int board_eth_init(struct bd_info *bd)
{
return ftmac100_initialize(bd);
}
#endif
ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
{
if (banknum == 0) { /* non-CFI boot flash */
info->portwidth = FLASH_CFI_8BIT;
info->chipwidth = FLASH_CFI_BY8;
info->interface = FLASH_CFI_X8;
return 1;
} else {
return 0;
}
}

2
common/board_f.c
View File

@ -272,7 +272,7 @@ static int setup_mon_len(void)
gd->mon_len = (ulong)&_end - (ulong)_init;
#elif defined(CONFIG_NIOS2) || defined(CONFIG_XTENSA)
gd->mon_len = CONFIG_SYS_MONITOR_LEN;
#elif defined(CONFIG_NDS32) || defined(CONFIG_SH) || defined(CONFIG_RISCV)
#elif defined(CONFIG_SH) || defined(CONFIG_RISCV)
gd->mon_len = (ulong)(&__bss_end) - (ulong)(&_start);
#elif defined(CONFIG_SYS_MONITOR_BASE)
/* TODO: use (ulong)&__bss_end - (ulong)&__text_start; ? */

5
common/board_r.c
View File

@ -120,7 +120,7 @@ static int initr_reloc_global_data(void)
{
#ifdef __ARM__
monitor_flash_len = _end - __image_copy_start;
#elif defined(CONFIG_NDS32) || defined(CONFIG_RISCV)
#elif defined(CONFIG_RISCV)
monitor_flash_len = (ulong)&_end - (ulong)&_start;
#elif !defined(CONFIG_SANDBOX) && !defined(CONFIG_NIOS2)
monitor_flash_len = (ulong)&__init_end - gd->relocaddr;
@ -631,8 +631,7 @@ static init_fnc_t init_sequence_r[] = {
#ifdef CONFIG_ADDR_MAP
init_addr_map,
#endif
#if defined(CONFIG_ARM) || defined(CONFIG_NDS32) || defined(CONFIG_RISCV) || \
defined(CONFIG_SANDBOX)
#if defined(CONFIG_ARM) || defined(CONFIG_RISCV) || defined(CONFIG_SANDBOX)
board_init, /* Setup chipselects */
#endif
/*

60
configs/adp-ae3xx_defconfig
View File

@ -1,60 +0,0 @@
CONFIG_NDS32=y
CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_TEXT_BASE=0x4A000000
CONFIG_SYS_MALLOC_LEN=0x80000
CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_NR_DRAM_BANKS=2
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x140000
CONFIG_ENV_SECT_SIZE=0x1000
CONFIG_DEFAULT_DEVICE_TREE="ae3xx"
CONFIG_SYS_CLK_FREQ=39062500
CONFIG_SYS_LOAD_ADDR=0x300000
CONFIG_TARGET_ADP_AE3XX=y
CONFIG_FIT=y
CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
# CONFIG_AUTO_COMPLETE is not set
CONFIG_SYS_PROMPT="NDS32 # "
CONFIG_CMD_IMLS=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF_TEST=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_BOOTP_SERVERIP=y
CONFIG_DM=y
CONFIG_CLK=y
CONFIG_MMC=y
CONFIG_FTSDC010=y
CONFIG_FTSDC010_SDIO=y
CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_CFI_FLASH=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_DM_ETH=y
CONFIG_FTMAC100=y
CONFIG_BAUDRATE=38400
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_ATCSPI200_SPI=y
CONFIG_TIMER=y
CONFIG_ATCPIT100_TIMER=y
CONFIG_PANIC_HANG=y

49
configs/adp-ag101p_defconfig
View File

@ -1,49 +0,0 @@
CONFIG_NDS32=y
CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_TEXT_BASE=0x11000000
CONFIG_SYS_MALLOC_LEN=0x80000
CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_NR_DRAM_BANKS=2
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="ag101p"
CONFIG_SYS_CLK_FREQ=39062500
CONFIG_SYS_LOAD_ADDR=0x300000
CONFIG_ENV_ADDR=0x80140000
CONFIG_TARGET_ADP_AG101P=y
CONFIG_FIT=y
CONFIG_SYS_MONITOR_BASE=0x80000000
CONFIG_BOOTDELAY=3
# CONFIG_AUTO_COMPLETE is not set
CONFIG_SYS_PROMPT="NDS32 # "
CONFIG_CMD_IMLS=y
CONFIG_CMD_MMC=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_BOOTP_SERVERIP=y
CONFIG_DM=y
CONFIG_MMC=y
CONFIG_FTSDC010=y
CONFIG_FTSDC010_SDIO=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_DM_ETH=y
CONFIG_FTMAC100=y
CONFIG_BAUDRATE=38400
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_TIMER=y
CONFIG_AG101P_TIMER=y

1
doc/README.standalone
View File

@ -56,7 +56,6 @@ Design Notes on Exporting U-Boot Functions to Standalone Applications:
ARM 0x0c100000 0x0c100000
MIPS 0x80200000 0x80200000
Blackfin 0x00001000 0x00001000
NDS32 0x00300000 0x00300000
Nios II 0x02000000 0x02000000
RISC-V 0x00600000 0x00600000

6
doc/README.watchdog
View File

@ -17,12 +17,6 @@ CONFIG_WATCHDOG_TIMEOUT_MSECS
CONFIG_WDT_AT91
Available for AT91SAM9 to service the watchdog.
CONFIG_FTWDT010_WATCHDOG
Available for FTWDT010 to service the watchdog.
CONFIG_FTWDT010_HW_TIMEOUT
Can be used to change the timeout for FTWDT010.
CONFIG_IMX_WATCHDOG
Available for i.mx31/35/5x/6x to service the watchdog. This is not
automatically set because some boards (vision2) still need to define

1
doc/arch/index.rst
View File

@ -10,7 +10,6 @@ Architecture-specific doc
arm64
m68k
mips
nds32
nios2
sandbox
sh

101
doc/arch/nds32.rst
View File

@ -1,101 +0,0 @@
.. SPDX-License-Identifier: GPL-2.0+
NDS32
=====
NDS32 is a new high-performance 32-bit RISC microprocessor core.
http://www.andestech.com/
AndeStar ISA
------------
AndeStar is a patent-pending 16-bit/32-bit mixed-length instruction set to
achieve optimal system performance, code density, and power efficiency.
It contains the following features:
- Intermixable 32-bit and 16-bit instruction sets without the need for
mode switch.
- 16-bit instructions as a frequently used subset of 32-bit instructions.
- RISC-style register-based instruction set.
- 32 32-bit General Purpose Registers (GPR).
- Upto 1024 User Special Registers (USR) for existing and extension
instructions.
- Rich load/store instructions for...
- Single memory access with base address update.
- Multiple aligned and unaligned memory accesses for memory copy and stack
operations.
- Data prefetch to improve data cache performance.
- Non-bus locking synchronization instructions.
- PC relative jump and PC read instructions for efficient position independent
code.
- Multiply-add and multiple-sub with 64-bit accumulator.
- Instruction for efficient power management.
- Bi-endian support.
- Three instruction extension space for application acceleration:
- Performance extension.
- Andes future extensions (for floating-point, multimedia, etc.)
- Customer extensions.
AndesCore CPU
-------------
Andes Technology has 4 families of CPU cores: N12, N10, N9, N8.
For details about N12 CPU family, please check below N1213 features.
N1213 is a configurable hard/soft core of NDS32's N12 CPU family.
N1213 Features
^^^^^^^^^^^^^^
CPU Core
- 16-/32-bit mixable instruction format.
- 32 general-purpose 32-bit registers.
- 8-stage pipeline.
- Dynamic branch prediction.
- 32/64/128/256 BTB.
- Return address stack (RAS).
- Vector interrupts for internal/external.
interrupt controller with 6 hardware interrupt signals.
- 3 HW-level nested interruptions.
- User and super-user mode support.
- Memory-mapped I/O.
- Address space up to 4GB.
Memory Management Unit
- TLB
- 4/8-entry fully associative iTLB/dTLB.
- 32/64/128-entry 4-way set-associati.ve main TLB.
- TLB locking support
- Optional hardware page table walker.
- Two groups of page size support.
- 4KB & 1MB.
- 8KB & 1MB.
Memory Subsystem
- I & D cache.
- Virtually indexed and physically tagged.
- Cache size: 8KB/16KB/32KB/64KB.
- Cache line size: 16B/32B.
- Set associativity: 2-way, 4-way or direct-mapped.
- Cache locking support.
- I & D local memory (LM).
- Size: 4KB to 1MB.
- Bank numbers: 1 or 2.
- Optional 1D/2D DMA engine.
- Internal or external to CPU core.
Bus Interface
- Synchronous/Asynchronous AHB bus: 0, 1 or 2 ports.
- Synchronous High speed memory port.
(HSMP): 0, 1 or 2 ports.
Debug
- JTAG debug interface.
- Embedded debug module (EDM).
- Optional embedded program tracer interface.
Miscellaneous
- Programmable data endian control.
- Performance monitoring mechanism.
The NDS32 ports of u-boot, the Linux kernel, the GNU toolchain and other
associated software are actively supported by Andes Technology Corporation.

2
doc/develop/global_data.rst
View File

@ -23,8 +23,6 @@ On most architectures the global data pointer is stored in a register.
+------------+----------+
| MicroBlaze | r31 |
+------------+----------+
| NDS32 | r10 |
+------------+----------+
| Nios II | gp |
+------------+----------+
| PowerPC | r2 |

4
doc/git-mailrc
View File

@ -52,7 +52,7 @@ alias wd Wolfgang Denk <wd@denx.de>
alias priyankajain Priyanka Jain <priyanka.jain@nxp.com>
# Architecture aliases
alias arch arc, arm, m68k, microblaze, mips, nds32, nios2, powerpc, sandbox, superh, x86
alias arch arc, arm, m68k, microblaze, mips, nios2, powerpc, sandbox, superh, x86
alias arches arch
alias arc uboot, abrodkin
@ -90,8 +90,6 @@ alias mb microblaze
alias mips uboot, danielschwierzeck
alias nds32 uboot, macpaul
alias nios uboot, Thomas Chou <thomas@wytron.com.tw>, smcnutt
alias nios2 nios

6
drivers/timer/Kconfig
View File

@ -40,12 +40,6 @@ config TIMER_EARLY
use an early timer. These functions must be supported by your timer
driver: timer_early_get_count() and timer_early_get_rate().
config AG101P_TIMER
bool "AG101P timer support"
depends on TIMER && NDS32
help
Select this to enable a timer for AG01P devices.
config ALTERA_TIMER
bool "Altera timer support"
depends on TIMER

2
drivers/timer/Makefile
View File

@ -3,12 +3,10 @@
# Copyright (C) 2015 Thomas Chou <thomas@wytron.com.tw>
obj-y += timer-uclass.o
obj-$(CONFIG_AG101P_TIMER) += ag101p_timer.o
obj-$(CONFIG_ALTERA_TIMER) += altera_timer.o
obj-$(CONFIG_ANDES_PLMT_TIMER) += andes_plmt_timer.o
obj-$(CONFIG_ARC_TIMER) += arc_timer.o
obj-$(CONFIG_AST_TIMER) += ast_timer.o
obj-$(CONFIG_ATCPIT100_TIMER) += atcpit100_timer.o
obj-$(CONFIG_ATMEL_PIT_TIMER) += atmel_pit_timer.o
obj-$(CONFIG_ATMEL_TCB_TIMER) += atmel_tcb_timer.o
obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence-ttc.o

117
drivers/timer/ag101p_timer.c
View File

@ -1,117 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Andestech ATFTMR010 timer driver
*
* (C) Copyright 2016
* Rick Chen, NDS32 Software Engineering, rick@andestech.com
*/
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <timer.h>
#include <linux/io.h>
/*
* Timer Control Register
*/
#define T3_UPDOWN (1 << 11)
#define T2_UPDOWN (1 << 10)
#define T1_UPDOWN (1 << 9)
#define T3_OFENABLE (1 << 8)
#define T3_CLOCK (1 << 7)
#define T3_ENABLE (1 << 6)
#define T2_OFENABLE (1 << 5)
#define T2_CLOCK (1 << 4)
#define T2_ENABLE (1 << 3)
#define T1_OFENABLE (1 << 2)
#define T1_CLOCK (1 << 1)
#define T1_ENABLE (1 << 0)
/*
* Timer Interrupt State & Mask Registers
*/
#define T3_OVERFLOW (1 << 8)
#define T3_MATCH2 (1 << 7)
#define T3_MATCH1 (1 << 6)
#define T2_OVERFLOW (1 << 5)
#define T2_MATCH2 (1 << 4)
#define T2_MATCH1 (1 << 3)
#define T1_OVERFLOW (1 << 2)
#define T1_MATCH2 (1 << 1)
#define T1_MATCH1 (1 << 0)
struct atftmr_timer_regs {
u32 t1_counter; /* 0x00 */
u32 t1_load; /* 0x04 */
u32 t1_match1; /* 0x08 */
u32 t1_match2; /* 0x0c */
u32 t2_counter; /* 0x10 */
u32 t2_load; /* 0x14 */
u32 t2_match1; /* 0x18 */
u32 t2_match2; /* 0x1c */
u32 t3_counter; /* 0x20 */
u32 t3_load; /* 0x24 */
u32 t3_match1; /* 0x28 */
u32 t3_match2; /* 0x2c */
u32 cr; /* 0x30 */
u32 int_state; /* 0x34 */
u32 int_mask; /* 0x38 */
};
struct atftmr_timer_plat {
struct atftmr_timer_regs *regs;
};
static u64 atftmr_timer_get_count(struct udevice *dev)
{
struct atftmr_timer_plat *plat = dev_get_plat(dev);
struct atftmr_timer_regs *const regs = plat->regs;
u32 val;
val = readl(&regs->t3_counter);
return timer_conv_64(val);
}
static int atftmr_timer_probe(struct udevice *dev)
{
struct atftmr_timer_plat *plat = dev_get_plat(dev);
struct atftmr_timer_regs *const regs = plat->regs;
u32 cr;
writel(0, &regs->t3_load);
writel(0, &regs->t3_counter);
writel(TIMER_LOAD_VAL, &regs->t3_match1);
writel(TIMER_LOAD_VAL, &regs->t3_match2);
/* disable interrupts */
writel(T3_MATCH1|T3_MATCH2|T3_OVERFLOW , &regs->int_mask);
cr = readl(&regs->cr);
cr |= (T3_ENABLE|T3_UPDOWN);
writel(cr, &regs->cr);
return 0;
}
static int atftme_timer_of_to_plat(struct udevice *dev)
{
struct atftmr_timer_plat *plat = dev_get_plat(dev);
plat->regs = map_physmem(dev_read_addr(dev),
sizeof(struct atftmr_timer_regs),
MAP_NOCACHE);
return 0;
}
static const struct timer_ops ag101p_timer_ops = {
.get_count = atftmr_timer_get_count,
};
static const struct udevice_id ag101p_timer_ids[] = {
{ .compatible = "andestech,attmr010" },
{}
};
U_BOOT_DRIVER(altera_timer) = {
.name = "ag101p_timer",
.id = UCLASS_TIMER,
.of_match = ag101p_timer_ids,
.of_to_plat = atftme_timer_of_to_plat,
.plat_auto = sizeof(struct atftmr_timer_plat),
.probe = atftmr_timer_probe,
.ops = &ag101p_timer_ops,
};

112
drivers/timer/atcpit100_timer.c
View File

@ -1,112 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Andestech ATCPIT100 timer driver
*
* (C) Copyright 2016
* Rick Chen, NDS32 Software Engineering, rick@andestech.com
*/
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <timer.h>
#include <linux/io.h>
#define REG32_TMR(x) (*(u32 *) ((plat->regs) + (x>>2)))
/*
* Definition of register offsets
*/
/* ID and Revision Register */
#define ID_REV 0x0
/* Configuration Register */
#define CFG 0x10
/* Interrupt Enable Register */
#define INT_EN 0x14
#define CH_INT_EN(c , i) ((1<<i)<<(4*c))
/* Interrupt Status Register */
#define INT_STA 0x18
#define CH_INT_STA(c , i) ((1<<i)<<(4*c))
/* Channel Enable Register */
#define CH_EN 0x1C
#define CH_TMR_EN(c , t) ((1<<t)<<(4*c))
/* Ch n Control REgister */
#define CH_CTL(n) (0x20+0x10*n)
/* Channel clock source , bit 3 , 0:External clock , 1:APB clock */
#define APB_CLK (1<<3)
/* Channel mode , bit 0~2 */
#define TMR_32 1
#define TMR_16 2
#define TMR_8 3
#define PWM 4
#define CH_REL(n) (0x24+0x10*n)
#define CH_CNT(n) (0x28+0x10*n)
struct atctmr_timer_regs {
u32 id_rev; /* 0x00 */
u32 reservd[3]; /* 0x04 ~ 0x0c */
u32 cfg; /* 0x10 */
u32 int_en; /* 0x14 */
u32 int_st; /* 0x18 */
u32 ch_en; /* 0x1c */
u32 ch0_ctrl; /* 0x20 */
u32 ch0_reload; /* 0x24 */
u32 ch0_cntr; /* 0x28 */
u32 reservd1; /* 0x2c */
u32 ch1_ctrl; /* 0x30 */
u32 ch1_reload; /* 0x34 */
u32 int_mask; /* 0x38 */
};
struct atcpit_timer_plat {
u32 *regs;
};
static u64 atcpit_timer_get_count(struct udevice *dev)
{
struct atcpit_timer_plat *plat = dev_get_plat(dev);
u32 val;
val = ~(REG32_TMR(CH_CNT(1))+0xffffffff);
return timer_conv_64(val);
}
static int atcpit_timer_probe(struct udevice *dev)
{
struct atcpit_timer_plat *plat = dev_get_plat(dev);
REG32_TMR(CH_REL(1)) = 0xffffffff;
REG32_TMR(CH_CTL(1)) = APB_CLK|TMR_32;
REG32_TMR(CH_EN) |= CH_TMR_EN(1 , 0);
return 0;
}
static int atcpit_timer_of_to_plat(struct udevice *dev)
{
struct atcpit_timer_plat *plat = dev_get_plat(dev);
plat->regs = map_physmem(dev_read_addr(dev), 0x100 , MAP_NOCACHE);
return 0;
}
static const struct timer_ops atcpit_timer_ops = {
.get_count = atcpit_timer_get_count,
};
static const struct udevice_id atcpit_timer_ids[] = {
{ .compatible = "andestech,atcpit100" },
{}
};
U_BOOT_DRIVER(atcpit100_timer) = {
.name = "atcpit100_timer",
.id = UCLASS_TIMER,
.of_match = atcpit_timer_ids,
.of_to_plat = atcpit_timer_of_to_plat,
.plat_auto = sizeof(struct atcpit_timer_plat),
.probe = atcpit_timer_probe,
.ops = &atcpit_timer_ops,
};

1
drivers/watchdog/Makefile
View File

@ -4,7 +4,6 @@
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
obj-$(CONFIG_WDT_AT91) += at91sam9_wdt.o
obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o
ifneq (,$(filter $(SOC), mx25 mx31 mx35 mx5 mx6 mx7 vf610))
obj-y += imx_watchdog.o
else

92
drivers/watchdog/ftwdt010_wdt.c
View File

@ -1,92 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Watchdog driver for the FTWDT010 Watch Dog Driver
*
* (c) Copyright 2004 Faraday Technology Corp. (www.faraday-tech.com)
* Based on sa1100_wdt.c by Oleg Drokin <green@crimea.edu>
* Based on SoftDog driver by Alan Cox <alan@redhat.com>
*
* Copyright (C) 2011 Andes Technology Corporation
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*
* 27/11/2004 Initial release, Faraday.
* 12/01/2011 Port to u-boot, Macpaul Lin.
*/
#include <common.h>
#include <log.h>
#include <watchdog.h>
#include <asm/io.h>
#include <faraday/ftwdt010_wdt.h>
/*
* Set the watchdog time interval.
* Counter is 32 bit.
*/
int ftwdt010_wdt_settimeout(unsigned int timeout)
{
unsigned int reg;
struct ftwdt010_wdt *wd = (struct ftwdt010_wdt *)CONFIG_FTWDT010_BASE;
debug("Activating WDT..\n");
/* Check if disabled */
if (readl(&wd->wdcr) & ~FTWDT010_WDCR_ENABLE) {
printf("sorry, watchdog is disabled\n");
return -1;
}
/*
* In a 66MHz system,
* if you set WDLOAD as 0x03EF1480 (66000000)
* the reset timer is 1 second.
*/
reg = FTWDT010_WDLOAD(timeout * FTWDT010_TIMEOUT_FACTOR);
writel(reg, &wd->wdload);
return 0;
}
void ftwdt010_wdt_reset(void)
{
struct ftwdt010_wdt *wd = (struct ftwdt010_wdt *)CONFIG_FTWDT010_BASE;
/* clear control register */
writel(0, &wd->wdcr);
/* Write Magic number */
writel(FTWDT010_WDRESTART_MAGIC, &wd->wdrestart);
/* Enable WDT */
writel((FTWDT010_WDCR_RST | FTWDT010_WDCR_ENABLE), &wd->wdcr);
}
void ftwdt010_wdt_disable(void)
{
struct ftwdt010_wdt *wd = (struct ftwdt010_wdt *)CONFIG_FTWDT010_BASE;
debug("Deactivating WDT..\n");
/*
* It was defined with CONFIG_WATCHDOG_NOWAYOUT in Linux
*
* Shut off the timer.
* Lock it in if it's a module and we defined ...NOWAYOUT
*/
writel(0, &wd->wdcr);
}
#if defined(CONFIG_HW_WATCHDOG)
void hw_watchdog_reset(void)
{
ftwdt010_wdt_reset();
}
void hw_watchdog_init(void)
{
/* set timer in ms */
ftwdt010_wdt_settimeout(CONFIG_FTWDT010_HW_TIMEOUT * 1000);
}
#endif

39
examples/standalone/nds32.lds
View File

@ -1,39 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
OUTPUT_FORMAT("elf32-nds32", "elf32-nds32", "elf32-nds32")
OUTPUT_ARCH(nds32)
ENTRY(_start)
SECTIONS
{
. = ALIGN(4);
.text :
{
*(.text)
}
. = ALIGN(4);
.data : { *(.data) }
. = ALIGN(4);
.got : {
__got_start = .;
*(.got)
__got_end = .;
}
. = ALIGN(4);
__bss_start = .;
.bss : { *(.bss) }
__bss_end = .;
. = ALIGN(4);
.rela.text : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
_end = .;
}

13
examples/standalone/stubs.c
View File

@ -161,19 +161,6 @@ gd_t *global_data;
" nop\n" \
" nop\n" \
: : "i"(offsetof(gd_t, jt)), "i"(FO(x)) : "r1", "r2");
#elif defined(CONFIG_NDS32)
/*
* r16 holds the pointer to the global_data. gp is call clobbered.
* not support reduced register (16 GPR).
*/
#define EXPORT_FUNC(f, a, x, ...) \
asm volatile ( \
" .globl " #x "\n" \
#x ":\n" \
" lwi $r16, [$gp + (%0)]\n" \
" lwi $r16, [$r16 + (%1)]\n" \
" jr $r16\n" \
: : "i"(offsetof(gd_t, jt)), "i"(FO(x)) : "$r16");
#elif defined(CONFIG_RISCV)
/*
* gp holds the pointer to the global_data. t0 is call clobbered.

186
include/configs/adp-ae3xx.h
View File

@ -1,186 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/arch-ae3xx/ae3xx.h>
/*
* CPU and Board Configuration Options
*/
#define CONFIG_USE_INTERRUPT
#define CONFIG_SKIP_TRUNOFF_WATCHDOG
/*
* Timer
*/
#define VERSION_CLOCK get_board_sys_clk()
/*
* Use Externel CLOCK or PCLK
*/
#undef CONFIG_FTRTC010_EXTCLK
#ifndef CONFIG_FTRTC010_EXTCLK
#define CONFIG_FTRTC010_PCLK
#endif
#ifdef CONFIG_FTRTC010_EXTCLK
#define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */
#else
#define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */
#endif
#define TIMER_LOAD_VAL 0xffffffff
/*
* Real Time Clock
*/
#define CONFIG_RTC_FTRTC010
/*
* Real Time Clock Divider
* RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ)
*/
#define OSC_5MHZ (5*1000000)
#define OSC_CLK (4*OSC_5MHZ)
#define RTC_DIV_COUNT (0.5) /* Why?? */
/*
* Serial console configuration
*/
/* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE
#ifndef CONFIG_DM_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE -4
#endif
#define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */
/*
* Miscellaneous configurable options
*/
/*
* Size of malloc() pool
*/
/* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
/*
* Physical Memory Map
*/
#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1 \
(PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */
#define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */
#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
GENERATED_GBL_DATA_SIZE)
/*
* Static memory controller configuration
*/
#define CONFIG_FTSMC020
#ifdef CONFIG_FTSMC020
#include <faraday/ftsmc020.h>
#define CONFIG_SYS_FTSMC020_CONFIGS { \
{ FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \
{ FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \
}
#ifndef CONFIG_SKIP_LOWLEVEL_INIT /* FLASH is on BANK 0 */
#define FTSMC020_BANK0_LOWLV_CONFIG (FTSMC020_BANK_ENABLE | \
FTSMC020_BANK_SIZE_32M | \
FTSMC020_BANK_MBW_32)
#define FTSMC020_BANK0_LOWLV_TIMING (FTSMC020_TPR_RBE | \
FTSMC020_TPR_AST(1) | \
FTSMC020_TPR_CTW(1) | \
FTSMC020_TPR_ATI(1) | \
FTSMC020_TPR_AT2(1) | \
FTSMC020_TPR_WTC(1) | \
FTSMC020_TPR_AHT(1) | \
FTSMC020_TPR_TRNA(1))
#endif
/*
* FLASH on ADP_AG101P is connected to BANK0
* Just disalbe the other BANK to avoid detection error.
*/
#define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \
FTSMC020_BANK_BASE(PHYS_FLASH_1) | \
FTSMC020_BANK_SIZE_32M | \
FTSMC020_BANK_MBW_32)
#define FTSMC020_BANK0_TIMING (FTSMC020_TPR_AST(3) | \
FTSMC020_TPR_CTW(3) | \
FTSMC020_TPR_ATI(0xf) | \
FTSMC020_TPR_AT2(3) | \
FTSMC020_TPR_WTC(3) | \
FTSMC020_TPR_AHT(3) | \
FTSMC020_TPR_TRNA(0xf))
#define FTSMC020_BANK1_CONFIG (0x00)
#define FTSMC020_BANK1_TIMING (0x00)
#endif /* CONFIG_FTSMC020 */
/*
* FLASH and environment organization
*/
/* use CFI framework */
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_SYS_CFI_FLASH_STATUS_POLL
/* support JEDEC */
/* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
#define PHYS_FLASH_1 0x88000000 /* BANK 0 */
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, }
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */
/* max number of memory banks */
/*
* There are 4 banks supported for this Controller,
* but we have only 1 bank connected to flash on board
*/
#define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}
/* max number of sectors on one chip */
#define CONFIG_FLASH_SECTOR_SIZE (0x10000*2)
#define CONFIG_SYS_MAX_FLASH_SECT 512
/* environments */
/* SPI FLASH */
/*
* For booting Linux, the board info and command line data
* have to be in the first 16 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
/* Initial Memory map for Linux*/
#define CONFIG_SYS_BOOTMAPSZ (64 << 20)
/* Increase max gunzip size */
#define CONFIG_SYS_BOOTM_LEN (64 << 20)
#endif /* __CONFIG_H */

299
include/configs/adp-ag101p.h
View File

@ -1,299 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2011 Andes Technology Corporation
* Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/arch-ag101/ag101.h>
/*
* CPU and Board Configuration Options
*/
#define CONFIG_USE_INTERRUPT
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_MEM_REMAP
#endif
/*
* Timer
*/
#define VERSION_CLOCK get_board_sys_clk()
/*
* Use Externel CLOCK or PCLK
*/
#undef CONFIG_FTRTC010_EXTCLK
#ifndef CONFIG_FTRTC010_EXTCLK
#define CONFIG_FTRTC010_PCLK
#endif
#ifdef CONFIG_FTRTC010_EXTCLK
#define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */
#else
#define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */
#endif
#define TIMER_LOAD_VAL 0xffffffff
/*
* Real Time Clock
*/
#define CONFIG_RTC_FTRTC010
/*
* Real Time Clock Divider
* RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ)
*/
#define OSC_5MHZ (5*1000000)
#define OSC_CLK (4*OSC_5MHZ)
#define RTC_DIV_COUNT (0.5) /* Why?? */
/*
* Serial console configuration
*/
/* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE
#ifndef CONFIG_DM_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE -4
#endif
#define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */
/*
* Miscellaneous configurable options
*/
/*
* AHB Controller configuration
*/
#define CONFIG_FTAHBC020S
#ifdef CONFIG_FTAHBC020S
#include <faraday/ftahbc020s.h>
/* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */
#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 0x100
/*
* CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S,
* hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote
* in C language.
*/
#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \
(FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \
FTAHBC020S_SLAVE_BSR_SIZE(0xb))
#endif
/*
* Watchdog
*/
#define CONFIG_FTWDT010_WATCHDOG
/*
* PMU Power controller configuration
*/
#define CONFIG_PMU
#define CONFIG_FTPMU010_POWER
#ifdef CONFIG_FTPMU010_POWER
#include <faraday/ftpmu010.h>
#define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS 0x0E
#define CONFIG_SYS_FTPMU010_SDRAMHTC (FTPMU010_SDRAMHTC_EBICTRL_DCSR | \
FTPMU010_SDRAMHTC_EBIDATA_DCSR | \
FTPMU010_SDRAMHTC_SDRAMCS_DCSR | \
FTPMU010_SDRAMHTC_SDRAMCTL_DCSR | \
FTPMU010_SDRAMHTC_CKE_DCSR | \
FTPMU010_SDRAMHTC_DQM_DCSR | \
FTPMU010_SDRAMHTC_SDCLK_DCSR)
#endif
/*
* SDRAM controller configuration
*/
#define CONFIG_FTSDMC021
#ifdef CONFIG_FTSDMC021
#include <faraday/ftsdmc021.h>
#define CONFIG_SYS_FTSDMC021_TP1 (FTSDMC021_TP1_TRAS(2) | \
FTSDMC021_TP1_TRP(1) | \
FTSDMC021_TP1_TRCD(1) | \
FTSDMC021_TP1_TRF(3) | \
FTSDMC021_TP1_TWR(1) | \
FTSDMC021_TP1_TCL(2))
#define CONFIG_SYS_FTSDMC021_TP2 (FTSDMC021_TP2_INI_PREC(4) | \
FTSDMC021_TP2_INI_REFT(8) | \
FTSDMC021_TP2_REF_INTV(0x180))
/*
* CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S,
* hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in
* C language.
*/
#define CONFIG_SYS_FTSDMC021_CR1 (FTSDMC021_CR1_DDW(2) | \
FTSDMC021_CR1_DSZ(3) | \
FTSDMC021_CR1_MBW(2) | \
FTSDMC021_CR1_BNKSIZE(6))
#define CONFIG_SYS_FTSDMC021_CR2 (FTSDMC021_CR2_IPREC | \
FTSDMC021_CR2_IREF | \
FTSDMC021_CR2_ISMR)
#define CONFIG_SYS_FTSDMC021_BANK0_BASE CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE
#define CONFIG_SYS_FTSDMC021_BANK0_BSR (FTSDMC021_BANK_ENABLE | \
CONFIG_SYS_FTSDMC021_BANK0_BASE)
#define CONFIG_SYS_FTSDMC021_BANK1_BASE \
(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20))
#define CONFIG_SYS_FTSDMC021_BANK1_BSR (FTSDMC021_BANK_ENABLE | \
CONFIG_SYS_FTSDMC021_BANK1_BASE)
#endif
/*
* Physical Memory Map
*/
#ifdef CONFIG_SKIP_LOWLEVEL_INIT
#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */
#else
#ifdef CONFIG_MEM_REMAP
#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */
#else
#define PHYS_SDRAM_0 0x80000000 /* SDRAM Bank #1 */
#endif
#endif
#define PHYS_SDRAM_1 \
(PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */
#ifdef CONFIG_SKIP_LOWLEVEL_INIT
#define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */
#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */
#else
#ifdef CONFIG_MEM_REMAP
#define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */
#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */
#else
#define PHYS_SDRAM_0_SIZE 0x08000000 /* 128 MB */
#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
#endif
#endif
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0
#ifdef CONFIG_MEM_REMAP
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
GENERATED_GBL_DATA_SIZE)
#else
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
GENERATED_GBL_DATA_SIZE)
#endif /* CONFIG_MEM_REMAP */
/*
* Static memory controller configuration
*/
#define CONFIG_FTSMC020
#ifdef CONFIG_FTSMC020
#include <faraday/ftsmc020.h>
#define CONFIG_SYS_FTSMC020_CONFIGS { \
{ FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \
{ FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \
}
#ifndef CONFIG_SKIP_LOWLEVEL_INIT /* FLASH is on BANK 0 */
#define FTSMC020_BANK0_LOWLV_CONFIG (FTSMC020_BANK_ENABLE | \
FTSMC020_BANK_SIZE_32M | \
FTSMC020_BANK_MBW_32)
#define FTSMC020_BANK0_LOWLV_TIMING (FTSMC020_TPR_RBE | \
FTSMC020_TPR_AST(1) | \
FTSMC020_TPR_CTW(1) | \
FTSMC020_TPR_ATI(1) | \
FTSMC020_TPR_AT2(1) | \
FTSMC020_TPR_WTC(1) | \
FTSMC020_TPR_AHT(1) | \
FTSMC020_TPR_TRNA(1))
#endif
/*
* FLASH on ADP_AG101P is connected to BANK0
* Just disalbe the other BANK to avoid detection error.
*/
#define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \
FTSMC020_BANK_BASE(PHYS_FLASH_1) | \
FTSMC020_BANK_SIZE_32M | \
FTSMC020_BANK_MBW_32)
#define FTSMC020_BANK0_TIMING (FTSMC020_TPR_AST(3) | \
FTSMC020_TPR_CTW(3) | \
FTSMC020_TPR_ATI(0xf) | \
FTSMC020_TPR_AT2(3) | \
FTSMC020_TPR_WTC(3) | \
FTSMC020_TPR_AHT(3) | \
FTSMC020_TPR_TRNA(0xf))
#define FTSMC020_BANK1_CONFIG (0x00)
#define FTSMC020_BANK1_TIMING (0x00)
#endif /* CONFIG_FTSMC020 */
/*
* FLASH and environment organization
*/
/* use CFI framework */
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_SYS_CFI_FLASH_STATUS_POLL
/* support JEDEC */
/* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
#ifdef CONFIG_SKIP_LOWLEVEL_INIT
#define PHYS_FLASH_1 0x80000000 /* BANK 0 */
#else
#ifdef CONFIG_MEM_REMAP
#define PHYS_FLASH_1 0x80000000 /* BANK 0 */
#else
#define PHYS_FLASH_1 0x00000000 /* BANK 0 */
#endif
#endif /* CONFIG_MEM_REMAP */
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, }
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */
/* max number of memory banks */
/*
* There are 4 banks supported for this Controller,
* but we have only 1 bank connected to flash on board
*/
#define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}
/* max number of sectors on one chip */
#define CONFIG_FLASH_SECTOR_SIZE (0x10000*2)
#define CONFIG_SYS_MAX_FLASH_SECT 512
/* environments */
/*
* For booting Linux, the board info and command line data
* have to be in the first 16 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
/* Initial Memory map for Linux*/
#define CONFIG_SYS_BOOTMAPSZ (64 << 20)
/* Increase max gunzip size */
#define CONFIG_SYS_BOOTM_LEN (64 << 20)
#endif /* __CONFIG_H */

2
lib/Kconfig
View File

@ -861,7 +861,7 @@ config LIB_ELF
config LMB
bool "Enable the logical memory blocks library (lmb)"
default y if ARC || ARM || M68K || MICROBLAZE || MIPS || NDS32 || \
default y if ARC || ARM || M68K || MICROBLAZE || MIPS || \
NIOS2 || PPC || RISCV || SANDBOX || SH || X86 || XTENSA
help
Support the library logical memory blocks.

7
lib/fdtdec.c
View File

@ -251,14 +251,7 @@ int fdtdec_get_pci_bar32(const struct udevice *dev, struct fdt_pci_addr *addr,
barnum = (barnum - PCI_BASE_ADDRESS_0) / 4;
/*
* There is a strange toolchain bug with nds32 which complains about
* an undefined reference here, even if fdtdec_get_pci_bar32() is never
* called. An #ifdef seems to be the only fix!
*/
#if !IS_ENABLED(CONFIG_NDS32)
*bar = dm_pci_read_bar32(dev, barnum);
#endif
return 0;
}

7
tools/buildman/README
View File

@ -192,7 +192,6 @@ aarch64: /opt/linaro/gcc-linaro-aarch64-none-elf-4.8-2013.10_linux
[toolchain-alias]
x86: i386
blackfin: bfin
nds32: nds32le
openrisc: or1k
@ -468,8 +467,6 @@ arc: https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/
download/arc-2016.09-release/arc_gnu_2016.09_prebuilt_uclibc_le_archs_linux_install.tar.gz
blackfin: http://sourceforge.net/projects/adi-toolchain/files/
blackfin-toolchain-elf-gcc-4.5-2014R1_45-RC2.x86_64.tar.bz2
nds32: http://osdk.andestech.com/packages/
nds32le-linux-glibc-v1.tgz
nios2: http://sourcery.mentor.com/public/gnu_toolchain/nios2-linux-gnu/
sourceryg++-2015.11-27-nios2-linux-gnu-i686-pc-linux-gnu.tar.bz2
sh: http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu/
@ -483,10 +480,10 @@ Buildman should now be set up to use your new toolchain.
At the time of writing, U-Boot has these architectures:
arc, arm, blackfin, m68k, microblaze, mips, nds32, nios2, openrisc
arc, arm, blackfin, m68k, microblaze, mips, nios2, openrisc
powerpc, sandbox, sh, sparc, x86
Of these, only arc and nds32 are not available at kernel.org..
Of these, only arc is not available at kernel.org..
How to run it

1
tools/buildman/bsettings.py
View File

@ -85,7 +85,6 @@ other = /
# Indicates which toolchain should be used to build for that arch
x86 = i386
blackfin = bfin
nds32 = nds32le
openrisc = or1k
[make-flags]

1
tools/buildman/builder.py
View File

@ -1071,7 +1071,6 @@ class Builder:
For example:
powerpc: (622 boards) text -0.0
arm: (285 boards) text -0.0
nds32: (3 boards) text -8.0
Args:
board_selected: Dict containing boards to summarise, keyed by

2
tools/docker/Dockerfile
View File

@ -29,7 +29,6 @@ RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_
# Manually install other toolchains
RUN wget -O - https://github.com/foss-xtensa/toolchain/releases/download/2020.07/x86_64-2020.07-xtensa-dc233c-elf.tar.gz | tar -C /opt -xz
RUN wget -O - https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/download/arc-2021.03-release/arc_gnu_2021.03_prebuilt_uclibc_le_archs_linux_install.tar.gz | tar --no-same-owner -C /opt -xz
RUN wget -O - https://github.com/vincentzwc/prebuilt-nds32-toolchain/releases/download/20180521/nds32le-linux-glibc-v3-upstream.tar.gz | tar -C /opt -xz
# Update and install things from apt now
RUN apt-get update && apt-get install -y \
@ -227,7 +226,6 @@ RUN /bin/echo -e "[toolchain]\nroot = /usr" > ~/.buildman
RUN /bin/echo -e "kernelorg = /opt/gcc-11.1.0-nolibc/*" >> ~/.buildman
RUN /bin/echo -e "arc = /opt/arc_gnu_2021.03_prebuilt_uclibc_le_archs_linux_install" >> ~/.buildman
RUN /bin/echo -e "\n[toolchain-prefix]\nxtensa = /opt/2020.07/xtensa-dc233c-elf/bin/xtensa-dc233c-elf-" >> ~/.buildman;
RUN /bin/echo -e "\nnds32 = /opt/nds32le-linux-glibc-v3-upstream/bin/nds32le-linux-" >> ~/.buildman;
RUN /bin/echo -e "\n[toolchain-alias]\nsh = sh2" >> ~/.buildman
RUN /bin/echo -e "\nriscv = riscv64" >> ~/.buildman
RUN /bin/echo -e "\nsandbox = x86_64" >> ~/.buildman