mmc: renesas-sdhi: Stop transmission in case tuning block transfer fails
The current code uses the state of tuning block received by SCC to determine whether or not to send transmission stop command. This is not correct. Use the state of tuning block transfer to determine whether or not to send transmission stop command instead, because the transmission stop command has to be sent in case the tuning block transfer failed. This requires two changes, separate variable to store and check the state of tuning block received by SCC, and another separate variable to store and check return value from transmission stop command. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com> Tested-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
This commit is contained in:
parent
60649a8d6c
commit
12859c2219
|
@ -568,8 +568,8 @@ int renesas_sdhi_execute_tuning(struct udevice *dev, uint opcode)
|
|||
struct mmc *mmc = upriv->mmc;
|
||||
unsigned int tap_num;
|
||||
unsigned int taps = 0;
|
||||
int i, ret = 0;
|
||||
u32 caps;
|
||||
int i, ret = 0, sret;
|
||||
u32 caps, reg;
|
||||
|
||||
/* Only supported on Renesas RCar */
|
||||
if (!(priv->caps & TMIO_SD_CAP_RCAR_UHS))
|
||||
|
@ -612,8 +612,8 @@ int renesas_sdhi_execute_tuning(struct udevice *dev, uint opcode)
|
|||
if (ret == 0)
|
||||
taps |= BIT(i);
|
||||
|
||||
ret = renesas_sdhi_compare_scc_data(priv);
|
||||
if (ret == 0)
|
||||
reg = renesas_sdhi_compare_scc_data(priv);
|
||||
if (reg == 0)
|
||||
priv->smpcmp |= BIT(i);
|
||||
|
||||
mdelay(1);
|
||||
|
@ -624,9 +624,9 @@ int renesas_sdhi_execute_tuning(struct udevice *dev, uint opcode)
|
|||
* eMMC.
|
||||
*/
|
||||
if (ret && (opcode == MMC_CMD_SEND_TUNING_BLOCK_HS200)) {
|
||||
ret = mmc_send_stop_transmission(mmc, false);
|
||||
if (ret < 0)
|
||||
dev_dbg(dev, "Tuning abort fail (%d)\n", ret);
|
||||
sret = mmc_send_stop_transmission(mmc, false);
|
||||
if (sret < 0)
|
||||
dev_dbg(dev, "Tuning abort fail (%d)\n", sret);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
Loading…
Reference in New Issue
Block a user