arm64: zynqmp: Add support for zcu670-revA
The board is sharing a lot of components with zcu208 but it contains differet silicon and also several components are done differently. The board has 4GB memory connected to PS and additional 4GB connected to PL. Compare to zcu208 sata support has been dropped and only USB3.0 is using GTR (lane2). Others GTRs are routed to connectors. MIO configuration is also shared with zcu111. The board is using si5381 chip compare to si5341 which is normally used. And as of now there is no Linux driver for this chip. PS reference clock is generated out of si570 chip which is also new approach compare to zcu208. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/3b296ef0f52bd94e32bdeb6d1beee29ac85f00a2.1695808407.git.michal.simek@amd.com
This commit is contained in:
Michal Simek
parent
eb357b75b7
commit
1ddf10d178
|
|
@ -447,6 +447,7 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \
|
|||
zynqmp-zcu1285-revA.dtb \
|
||||
zynqmp-zcu208-revA.dtb \
|
||||
zynqmp-zcu216-revA.dtb \
|
||||
zynqmp-zcu670-revA.dtb \
|
||||
zynqmp-zc1232-revA.dtb \
|
||||
zynqmp-zc1254-revA.dtb \
|
||||
zynqmp-zc1751-xm015-dc1.dtb \
|
||||
|
|
|
|||
669
arch/arm/dts/zynqmp-zcu670-revA.dts
Normal file
669
arch/arm/dts/zynqmp-zcu670-revA.dts
Normal file
|
|
@ -0,0 +1,669 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* dts file for Xilinx ZynqMP ZCU670 (67DR)
|
||||
*
|
||||
* (C) Copyright 2017 - 2022, Xilinx, Inc.
|
||||
* (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
|
||||
*
|
||||
* Michal Simek <michal.simek@amd.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "zynqmp.dtsi"
|
||||
#include "zynqmp-clk-ccf.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
|
||||
#include <dt-bindings/phy/phy.h>
|
||||
|
||||
/ {
|
||||
model = "ZynqMP ZCU670 RevA";
|
||||
compatible = "xlnx,zynqmp-zcu670-revA", "xlnx,zynqmp-zcu670",
|
||||
"xlnx,zynqmp";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gem3;
|
||||
i2c0 = &i2c0;
|
||||
i2c1 = &i2c1;
|
||||
mmc0 = &sdhci1;
|
||||
nvmem0 = &eeprom;
|
||||
rtc0 = &rtc;
|
||||
serial0 = &uart0;
|
||||
serial1 = &dcc;
|
||||
spi0 = &qspi;
|
||||
usb0 = &usb0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "earlycon";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0 0 0 0x80000000>, <0x8 0x0 0x0 0x80000000>;
|
||||
/* Another 4GB connected to PL */
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
autorepeat;
|
||||
sw1 {
|
||||
label = "sw1";
|
||||
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
|
||||
linux,code = <BTN_MISC>;
|
||||
wakeup-source;
|
||||
autorepeat;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
heartbeat-led {
|
||||
label = "heartbeat"; /* DS1 */
|
||||
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
ina226-vccint {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vccint 0>, <&vccint 1>, <&vccint 2>, <&vccint 3>;
|
||||
};
|
||||
ina226-vccint-io-bram-ps {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vccint_io_bram_ps 0>, <&vccint_io_bram_ps 1>, <&vccint_io_bram_ps 2>, <&vccint_io_bram_ps 3>;
|
||||
};
|
||||
ina226-vcc1v8 {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vcc1v8 0>, <&vcc1v8 1>, <&vcc1v8 2>, <&vcc1v8 3>;
|
||||
};
|
||||
ina226-vcc1v2 {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vcc1v2 0>, <&vcc1v2 1>, <&vcc1v2 2>, <&vcc1v2 3>;
|
||||
};
|
||||
ina226-vadj-fmc {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vadj_fmc 0>, <&vadj_fmc 1>, <&vadj_fmc 2>, <&vadj_fmc 3>;
|
||||
};
|
||||
ina226-mgtavcc {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&mgtavcc 0>, <&mgtavcc 1>, <&mgtavcc 2>, <&mgtavcc 3>;
|
||||
};
|
||||
ina226-mgt1v2 {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&mgt1v2 0>, <&mgt1v2 1>, <&mgt1v2 2>, <&mgt1v2 3>;
|
||||
};
|
||||
ina226-mgt1v8 {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&mgt1v8 0>, <&mgt1v8 1>, <&mgt1v8 2>, <&mgt1v8 3>;
|
||||
};
|
||||
ina226-vccint-ams {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vccint_ams 0>, <&vccint_ams 1>, <&vccint_ams 2>, <&vccint_ams 3>;
|
||||
};
|
||||
ina226-dac-avtt {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&dac_avtt 0>, <&dac_avtt 1>, <&dac_avtt 2>, <&dac_avtt 3>;
|
||||
};
|
||||
ina226-dac-avccaux {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&dac_avccaux 0>, <&dac_avccaux 1>, <&dac_avccaux 2>, <&dac_avccaux 3>;
|
||||
};
|
||||
ina226-adc-avcc {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc_avcc 0>, <&adc_avcc 1>, <&adc_avcc 2>, <&adc_avcc 3>;
|
||||
};
|
||||
ina226-adc-avccaux {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc_avccaux 0>, <&adc_avccaux 1>, <&adc_avccaux 2>, <&adc_avccaux 3>;
|
||||
};
|
||||
ina226-dac-avcc {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&dac_avcc 0>, <&dac_avcc 1>, <&dac_avcc 2>, <&dac_avcc 3>;
|
||||
};
|
||||
|
||||
/* 48MHz reference crystal */
|
||||
ref48: ref48M {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <48000000>;
|
||||
};
|
||||
|
||||
si5381_6: si5381_6 { /* refclk_usb3 - u43 */
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <26000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&dcc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fpd_dma_chan1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fpd_dma_chan2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fpd_dma_chan3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fpd_dma_chan4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fpd_dma_chan5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fpd_dma_chan6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fpd_dma_chan7 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fpd_dma_chan8 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gem3 {
|
||||
status = "okay";
|
||||
phy-handle = <&phy0>;
|
||||
phy-mode = "rgmii-id";
|
||||
mdio: mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
phy0: ethernet-phy@c {
|
||||
#phy-cells = <1>;
|
||||
compatible = "ethernet-phy-id2000.a231";
|
||||
reg = <0xc>;
|
||||
ti,rx-internal-delay = <0x8>;
|
||||
ti,tx-internal-delay = <0xa>;
|
||||
ti,fifo-depth = <0x1>;
|
||||
ti,dp83867-rxctrl-strap-quirk;
|
||||
reset-gpios = <&tca6416_u15 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio {
|
||||
status = "okay";
|
||||
gpio-line-names = "QSPI_LWR_CLK", "QSPI_LWR_DQ1", "QSPI_LWR_DQ2", "QSPI_LWR_DQ3", "QSPI_LWR_DQ0", /* 0 - 4 */
|
||||
"QSPI_LWR_CS_B", "", "QSPI_UPR_CS_B", "QSPI_UPR_DQ0", "QSPI_UPR_DQ1", /* 5 - 9 */
|
||||
"QSPI_UPR_DQ2", "QSPI_UPR_DQ3", "QSPI_UPR_CLK", "PS_GPIO2", "I2C0_SCL", /* 10 - 14 */
|
||||
"I2C0_SDA", "I2C1_SCL", "I2C1_SDA", "UART0_TXD", "UART0_RXD", /* 15 - 19 */
|
||||
"", "", "BUTTON", "LED", "", /* 20 - 24 */
|
||||
"", "PMU_INPUT", "SFP3_TX_DISABLE", "SFP2_TX_DISABLE", "SFP1_TX_DISABLE", /* 25 - 29 */
|
||||
"SFP0_TX_DISABLE", "", "PMU_GPO0", "PMU_GPO1", "PMU_GPO2", /* 30 - 34 */
|
||||
"PMU_GPO3", "PMU_GPO4", "PMU_GPO5", "PS_GPIO1", "SDIO_SEL", /* 35 - 39 */
|
||||
"SDIO_DIR_CMD", "SDIO_DIR_DAT0", "SDIO_DIR_DAT1", "SD_PWR_RST", "", /* 40 - 44 */
|
||||
"SDIO_DETECT", "SDIO_DAT0", "SDIO_DAT1", "SDIO_DAT2", "SDIO_DAT3", /* 45 - 49 */
|
||||
"SDIO_CMD", "SDIO_CLK", "USB_CLK", "USB_DIR", "USB_DATA2", /* 50 - 54 */
|
||||
"USB_NXT", "USB_DATA0", "USB_DATA1", "USB_STP", "USB_DATA3", /* 55 - 59 */
|
||||
"USB_DATA4", "USB_DATA5", "USB_DATA6", "USB_DATA7", "ENET_TX_CLK", /* 60 - 64 */
|
||||
"ENET_TX_D0", "ENET_TX_D1", "ENET_TX_D2", "ENET_TX_D3", "ENET_TX_CTRL", /* 65 - 69 */
|
||||
"ENET_RX_CLK", "ENET_RX_D0", "ENET_RX_D1", "ENET_RX_D2", "ENET_RX_D3", /* 70 - 74 */
|
||||
"ENET_RX_CTRL", "ENET_MDC", "ENET_MDIO", /* 75 - 77, MIO end and EMIO start */
|
||||
"", "", /* 78 - 79 */
|
||||
"", "", "", "", "", /* 80 - 84 */
|
||||
"", "", "", "", "", /* 85 - 89 */
|
||||
"", "", "", "", "", /* 90 - 94 */
|
||||
"", "", "", "", "", /* 95 - 99 */
|
||||
"", "", "", "", "", /* 100 - 104 */
|
||||
"", "", "", "", "", /* 105 - 109 */
|
||||
"", "", "", "", "", /* 110 - 114 */
|
||||
"", "", "", "", "", /* 115 - 119 */
|
||||
"", "", "", "", "", /* 120 - 124 */
|
||||
"", "", "", "", "", /* 125 - 129 */
|
||||
"", "", "", "", "", /* 130 - 134 */
|
||||
"", "", "", "", "", /* 135 - 139 */
|
||||
"", "", "", "", "", /* 140 - 144 */
|
||||
"", "", "", "", "", /* 145 - 149 */
|
||||
"", "", "", "", "", /* 150 - 154 */
|
||||
"", "", "", "", "", /* 155 - 159 */
|
||||
"", "", "", "", "", /* 160 - 164 */
|
||||
"", "", "", "", "", /* 165 - 169 */
|
||||
"", "", "", ""; /* 170 - 173 */
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-names = "default", "gpio";
|
||||
pinctrl-0 = <&pinctrl_i2c0_default>;
|
||||
pinctrl-1 = <&pinctrl_i2c0_gpio>;
|
||||
scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
|
||||
tca6416_u15: gpio@20 { /* u15 */
|
||||
compatible = "ti,tca6416";
|
||||
reg = <0x20>;
|
||||
gpio-controller; /* interrupt not connected */
|
||||
#gpio-cells = <2>;
|
||||
gpio-line-names = "MAX6643_OT_B", "MAX6643_FANFAIL_B", "MIO26_PMU_INPUT_LS", "DAC_AVTT_VOUT_SEL", /* 0 - 3 */
|
||||
"SI5381_INT_ALM", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B", "MAX6643_FULL_SPEED", /* 4 - 7 */
|
||||
"FMCP_HSPC_PRSNT_M2C_B", "", "", "VCCINT_VRHOT_B", /* 10 - 13 */
|
||||
"", "8A34001_EXP_RST_B", "IRPS5401_ALERT_B", "INA226_PMBUS_ALERT"; /* 14 - 17 */
|
||||
};
|
||||
|
||||
i2c-mux@75 { /* u17 */
|
||||
compatible = "nxp,pca9544";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x75>;
|
||||
i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
/* PS_PMBUS */
|
||||
/* PMBUS_ALERT done via pca9544 */
|
||||
vccint: ina226@40 { /* u65 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vccint";
|
||||
reg = <0x40>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
vccint_io_bram_ps: ina226@41 { /* u57 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vccint-io-bram-ps";
|
||||
reg = <0x41>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
vcc1v8: ina226@42 { /* u60 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vcc1v8";
|
||||
reg = <0x42>;
|
||||
shunt-resistor = <2000>;
|
||||
};
|
||||
vcc1v2: ina226@43 { /* u58 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vcc1v2";
|
||||
reg = <0x43>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
vadj_fmc: ina226@45 { /* u62 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vadj-fmc";
|
||||
reg = <0x45>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
mgtavcc: ina226@46 { /* u67 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-mgtavcc";
|
||||
reg = <0x46>;
|
||||
shunt-resistor = <2000>;
|
||||
};
|
||||
mgt1v2: ina226@47 { /* u63 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-mgt1v2";
|
||||
reg = <0x47>;
|
||||
shunt-resistor = <5000>; /* Not in schematics */
|
||||
};
|
||||
mgt1v8: ina226@48 { /* u64 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-mgt1v8";
|
||||
reg = <0x48>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
vccint_ams: ina226@49 { /* u61 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vccint-ams";
|
||||
reg = <0x49>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
dac_avtt: ina226@4a { /* u59 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-dac-avtt";
|
||||
reg = <0x4a>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
dac_avccaux: ina226@4b { /* u124 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-dac-avccaux";
|
||||
reg = <0x4b>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
adc_avcc: ina226@4c { /* u75 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-adc-avcc";
|
||||
reg = <0x4c>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
adc_avccaux: ina226@4d { /* u71 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-adc-avccaux";
|
||||
reg = <0x4d>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
dac_avcc: ina226@4e { /* u77 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-dac-avcc";
|
||||
reg = <0x4e>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
};
|
||||
i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
/* NC */
|
||||
};
|
||||
i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
/* u104 - ir35215 0x10/0x40 */
|
||||
/* u127 - ir38164 0x1b/0x4b */
|
||||
/* u112 - ir38164 0x13/0x43 */
|
||||
/* u123 - ir38164 0x1c/0x4c */
|
||||
|
||||
irps5401_44: irps5401@44 { /* IRPS5401 - u53 */
|
||||
compatible = "infineon,irps5401";
|
||||
reg = <0x44>; /* i2c addr 0x14 */
|
||||
};
|
||||
irps5401_45: irps5401@45 { /* IRPS5401 - u55 */
|
||||
compatible = "infineon,irps5401";
|
||||
reg = <0x45>; /* i2c addr 0x15 */
|
||||
};
|
||||
/* J21 header too */
|
||||
|
||||
};
|
||||
i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
/* SYSMON */
|
||||
};
|
||||
};
|
||||
/* u38 MPS430 */
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-names = "default", "gpio";
|
||||
pinctrl-0 = <&pinctrl_i2c1_default>;
|
||||
pinctrl-1 = <&pinctrl_i2c1_gpio>;
|
||||
scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
|
||||
i2c-mux@74 {
|
||||
compatible = "nxp,pca9548"; /* u20 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x74>;
|
||||
/* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
|
||||
i2c_eeprom: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
/*
|
||||
* IIC_EEPROM 1kB memory which uses 256B blocks
|
||||
* where every block has different address.
|
||||
* 0 - 256B address 0x54
|
||||
* 256B - 512B address 0x55
|
||||
* 512B - 768B address 0x56
|
||||
* 768B - 1024B address 0x57
|
||||
*/
|
||||
eeprom: eeprom@54 { /* u21 */
|
||||
compatible = "atmel,24c128";
|
||||
reg = <0x54>;
|
||||
};
|
||||
};
|
||||
i2c_si5381: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
/* SI5381 - u43 */
|
||||
/* si5381: clock-generator@68 {
|
||||
reg = <0x68>;
|
||||
};*/
|
||||
};
|
||||
i2c_si570_user_c0: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
si570_1: clock-generator@5d { /* USER C0 SI570 - u47 */
|
||||
#clock-cells = <0>;
|
||||
compatible = "silabs,si570";
|
||||
reg = <0x5d>;
|
||||
temperature-stability = <50>;
|
||||
factory-fout = <300000000>;
|
||||
clock-frequency = <300000000>;
|
||||
clock-output-names = "si570_user_c0";
|
||||
};
|
||||
};
|
||||
i2c_si570_mgt: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
si570_2: clock-generator@5d { /* USER MGT SI570 - u48 */
|
||||
#clock-cells = <0>;
|
||||
compatible = "silabs,si570";
|
||||
reg = <0x5d>;
|
||||
temperature-stability = <50>;
|
||||
factory-fout = <156250000>;
|
||||
clock-frequency = <156250000>;
|
||||
clock-output-names = "si570_mgt";
|
||||
};
|
||||
};
|
||||
i2c_8a34001: i2c@4 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <4>;
|
||||
/* U409B - 8a34001 */
|
||||
};
|
||||
i2c_clk104: i2c@5 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <5>;
|
||||
/* CLK104_SDA */
|
||||
};
|
||||
i2c@6 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <6>;
|
||||
/* RFMCP connector */
|
||||
};
|
||||
/* 7 NC */
|
||||
};
|
||||
|
||||
i2c-mux@75 {
|
||||
compatible = "nxp,pca9548"; /* u22 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x75>;
|
||||
/* FIXME reset-gpios = <&tca6416_u15 SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
|
||||
i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
/* FMCP_HSPC_IIC */
|
||||
};
|
||||
i2c_si570_psrefclk: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
si570_3: clock-generator@5d { /* USER SI570 PSREFCLK - u130 */
|
||||
#clock-cells = <0>;
|
||||
compatible = "silabs,si570";
|
||||
reg = <0x5d>;
|
||||
temperature-stability = <50>;
|
||||
factory-fout = <33333333>;
|
||||
clock-frequency = <33333333>;
|
||||
clock-output-names = "si570_ps_ref_clk";
|
||||
silabs,skip-recall;
|
||||
};
|
||||
};
|
||||
i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
/* SYSMON */
|
||||
};
|
||||
i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
/* DDR4 SODIMM */
|
||||
};
|
||||
i2c@4 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <4>;
|
||||
/* SFP3 */
|
||||
};
|
||||
i2c@5 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <5>;
|
||||
/* SFP2 */
|
||||
};
|
||||
i2c@6 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <6>;
|
||||
/* SFP1 */
|
||||
};
|
||||
i2c@7 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <7>;
|
||||
/* SFP0 */
|
||||
};
|
||||
};
|
||||
/* u38 MPS430 */
|
||||
};
|
||||
|
||||
&pinctrl0 {
|
||||
status = "okay";
|
||||
pinctrl_i2c0_default: i2c0-default {
|
||||
mux {
|
||||
groups = "i2c0_3_grp";
|
||||
function = "i2c0";
|
||||
};
|
||||
|
||||
conf {
|
||||
groups = "i2c0_3_grp";
|
||||
bias-pull-up;
|
||||
slew-rate = <SLEW_RATE_SLOW>;
|
||||
power-source = <IO_STANDARD_LVCMOS18>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_i2c0_gpio: i2c0-gpio {
|
||||
mux {
|
||||
groups = "gpio0_14_grp", "gpio0_15_grp";
|
||||
function = "gpio0";
|
||||
};
|
||||
|
||||
conf {
|
||||
groups = "gpio0_14_grp", "gpio0_15_grp";
|
||||
slew-rate = <SLEW_RATE_SLOW>;
|
||||
power-source = <IO_STANDARD_LVCMOS18>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_i2c1_default: i2c1-default {
|
||||
mux {
|
||||
groups = "i2c1_4_grp";
|
||||
function = "i2c1";
|
||||
};
|
||||
|
||||
conf {
|
||||
groups = "i2c1_4_grp";
|
||||
bias-pull-up;
|
||||
slew-rate = <SLEW_RATE_SLOW>;
|
||||
power-source = <IO_STANDARD_LVCMOS18>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_i2c1_gpio: i2c1-gpio {
|
||||
mux {
|
||||
groups = "gpio0_16_grp", "gpio0_17_grp";
|
||||
function = "gpio0";
|
||||
};
|
||||
|
||||
conf {
|
||||
groups = "gpio0_16_grp", "gpio0_17_grp";
|
||||
slew-rate = <SLEW_RATE_SLOW>;
|
||||
power-source = <IO_STANDARD_LVCMOS18>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qspi {
|
||||
status = "okay";
|
||||
num-cs = <2>;
|
||||
flash@0 {
|
||||
compatible = "m25p80", "jedec,spi-nor"; /* U11 and U12 MT25QU02GCBBE12 2Gb */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0>, <1>;
|
||||
parallel-memories = /bits/ 64 <0x10000000 0x10000000>; /* 256MB */
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
|
||||
spi-max-frequency = <108000000>; /* Based on DC1 spec */
|
||||
};
|
||||
};
|
||||
|
||||
&rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* SD1 with level shifter */
|
||||
&sdhci1 {
|
||||
status = "okay";
|
||||
disable-wp;
|
||||
/*
|
||||
* This property should be removed for supporting UHS mode
|
||||
*/
|
||||
no-1-8-v;
|
||||
xlnx,mio-bank = <1>;
|
||||
};
|
||||
|
||||
&psgtr {
|
||||
status = "okay";
|
||||
/* hspc_dp4, hspc_dp5, usb3, hspc_dp6 */
|
||||
clocks = <&si5381_6>;
|
||||
clock-names = "ref2";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* ULPI SMSC USB3320 */
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
phy-names = "usb3-phy";
|
||||
phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
|
||||
};
|
||||
|
||||
&dwc3_0 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
snps,usb3_lpm_capable;
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user