Embedded_Projects/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

xilinx: Remove unused ZYNQ_MAC_IN_EEPROM/ZYNQ_GEM_I2C_MAC_OFFSET entries

Browse Source 
The commit ba74bcf3e0 ("xilinx: common: Remove
zynq_board_read_rom_ethaddr()") removed zynq_board_read_rom_ethaddr()
because xlnx,eeprom link via DT chosen node is no longer used. But forget
to remove Kconfig entries which are used by this code only.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/f97451ed33409838efea4071553b6da795cfc578.1669192026.git.michal.simek@amd.com
This commit is contained in:
Michal Simek 2022-11-23 09:27:08 +01:00
parent f3538a3cbe
commit 2e3c10eea0
4 changed files with 0 additions and 23 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
board/xilinx/Kconfig
View File

@ -58,23 +58,6 @@ config BOOT_SCRIPT_OFFSET
help
Specifies distro boot script offset in NAND/QSPI/NOR flash.
config ZYNQ_MAC_IN_EEPROM
bool "Reading MAC address from EEPROM"
help
Enable this option if your MAC address is saved in eeprom and
xlnx,eeprom DT property in chosen node points to it.
if ZYNQ_MAC_IN_EEPROM
config ZYNQ_GEM_I2C_MAC_OFFSET
hex "Set the I2C MAC offset"
default 0x0
depends on DM_I2C
help
Set the MAC offset for i2C.
endif
config CMD_FRU
bool "FRU information for product"
help

2
configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig
View File

@ -8,8 +8,6 @@ CONFIG_DEFAULT_DEVICE_TREE="avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0"
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_ZYNQ_MAC_IN_EEPROM=y
CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xfa
CONFIG_ZYNQMP_PSU_INIT_ENABLED=y
CONFIG_SYS_LOAD_ADDR=0x8000000
CONFIG_DEBUG_UART=y

2
configs/syzygy_hub_defconfig
View File

@ -9,8 +9,6 @@ CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="zynq-syzygy-hub"
CONFIG_SPL_STACK_R_ADDR=0x200000
CONFIG_SPL=y
CONFIG_ZYNQ_MAC_IN_EEPROM=y
CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xFA
CONFIG_SYS_LOAD_ADDR=0x0
CONFIG_DEBUG_UART=y
CONFIG_DISTRO_DEFAULTS=y

2
configs/xilinx_zynqmp_virt_defconfig
View File

@ -13,8 +13,6 @@ CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x1E80000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_ZYNQ_MAC_IN_EEPROM=y
CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
CONFIG_CMD_FRU=y
CONFIG_ZYNQMP_USB=y
CONFIG_SYS_LOAD_ADDR=0x8000000