event: Convert misc_init_f() to use events

This hook can be implmented using events, for the three boards that
actually use it.

Add the event type and event handlers. Drop CONFIG_MISC_INIT_F since we
can just use CONFIG_EVENT to control this. Since sandbox always enables
CONFIG_EVENT, we can drop the defconfig lines there too.

Signed-off-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Simon Glass 2022-03-04 08:43:04 -07:00 committed by Tom Rini
parent 5b896ed585
commit 42fdcebf85
21 changed files with 32 additions and 22 deletions

View File

@ -8,6 +8,7 @@
#include <command.h>
#include <efi_loader.h>
#include <errno.h>
#include <event.h>
#include <init.h>
#include <log.h>
#include <os.h>
@ -119,10 +120,11 @@ int sandbox_early_getopt_check(void)
os_exit(0);
}
int misc_init_f(void)
static int sandbox_misc_init_f(void *ctx, struct event *event)
{
return sandbox_early_getopt_check();
}
EVENT_SPY(EVT_MISC_INIT_F, sandbox_misc_init_f);
static int sandbox_cmdline_cb_help(struct sandbox_state *state, const char *arg)
{

View File

@ -10,6 +10,7 @@
#include <command.h>
#include <cros_ec.h>
#include <dm.h>
#include <event.h>
#include <init.h>
#include <log.h>
#include <sysinfo.h>
@ -32,11 +33,12 @@ struct cros_gpio_info {
int flags;
};
int misc_init_f(void)
static int coral_check_ll_boot(void *ctx, struct event *event)
{
if (!ll_boot_init()) {
printf("Running as secondary loader");
if (gd->arch.coreboot_table) {
if (CONFIG_IS_ENABLED(COREBOOT_SYSINFO) &&
gd->arch.coreboot_table) {
int ret;
printf(" (found coreboot table at %lx)",
@ -55,6 +57,7 @@ int misc_init_f(void)
return 0;
}
EVENT_SPY(EVT_MISC_INIT_F, coral_check_ll_boot);
int arch_misc_init(void)
{

View File

@ -6,6 +6,7 @@
* Copyright 2013 Freescale Semiconductor, Inc.
*/
#include <event.h>
#include <asm/cache.h>
#include <asm/fsl_fdt.h>
#include <asm/fsl_law.h>
@ -181,7 +182,7 @@ unsigned long get_serial_clock(unsigned long dummy)
return (gd->bus_clk / 2);
}
int misc_init_f(void)
static int kmcent2_misc_init_f(void *ctx, struct event *event)
{
/* configure QRIO pis for i2c deblocking */
i2c_deblock_gpio_cfg();
@ -209,6 +210,7 @@ int misc_init_f(void)
return 0;
}
EVENT_SPY(EVT_MISC_INIT_F, kmcent2_misc_init_f);
#define USED_SRDS_BANK 0
#define EXPECTED_SRDS_RFCK SRDS_PLLCR0_RFCK_SEL_100

View File

@ -4,6 +4,7 @@
*/
#include <common.h>
#include <event.h>
#include <i2c.h>
#include <asm/io.h>
#include <asm/arch/immap_ls102xa.h>
@ -109,12 +110,14 @@ int board_early_init_f(void)
return 0;
}
int misc_init_f(void)
static int pg_wcom_misc_init_f(void *ctx, struct event *event)
{
if (IS_ENABLED(CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED))
check_for_uboot_update();
return 0;
}
EVENT_SPY(EVT_MISC_INIT_F, pg_wcom_misc_init_f);
int board_init(void)
{

View File

@ -589,12 +589,6 @@ config LAST_STAGE_INIT
U-Boot calls last_stage_init() before the command-line interpreter is
started.
config MISC_INIT_F
bool "Execute pre-relocation misc init"
help
Enabling this option calls the 'misc_init_f' function in the init
sequence just before DRAM is inited.
config MISC_INIT_R
bool "Execute Misc Init"
default y if ARCH_KEYSTONE || ARCH_SUNXI || MPC85xx

View File

@ -818,6 +818,11 @@ __weak int clear_bss(void)
return 0;
}
static int misc_init_f(void)
{
return event_notify_null(EVT_MISC_INIT_F);
}
static const init_fnc_t init_sequence_f[] = {
setup_mon_len,
#ifdef CONFIG_OF_CONTROL
@ -877,9 +882,7 @@ static const init_fnc_t init_sequence_f[] = {
show_board_info,
#endif
INIT_FUNC_WATCHDOG_INIT
#if defined(CONFIG_MISC_INIT_F)
misc_init_f,
#endif
INIT_FUNC_WATCHDOG_RESET
#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY)
init_func_i2c,

View File

@ -30,6 +30,9 @@ const char *const type_name[] = {
"dm_post_probe",
"dm_pre_remove",
"dm_post_remove",
/* init hooks */
"misc_init_f",
};
_Static_assert(ARRAY_SIZE(type_name) == EVT_COUNT, "event type_name size");

View File

@ -35,6 +35,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="tpm init; tpm startup TPM2_SU_CLEAR; read mmc 0:2 100000 0 80; setexpr loader *001004f0; setexpr size *00100518; setexpr blocks $size / 200; read mmc 0:2 100000 80 $blocks; setexpr setup $loader - 1000; setexpr cmdline_ptr $loader - 2000; setexpr.s cmdline *$cmdline_ptr; setexpr cmdline gsub %U \\\\${uuid}; if part uuid mmc 0:2 uuid; then zboot start 100000 0 0 0 $setup cmdline; zboot load; zboot setup; zboot dump; zboot go;fi"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_EVENT=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_BLOBLIST=y
# CONFIG_TPL_BLOBLIST is not set

View File

@ -16,10 +16,10 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_EVENT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_MISC_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_DM=y
CONFIG_CMD_I2C=y

View File

@ -35,6 +35,7 @@ CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
CONFIG_SILENT_CONSOLE=y
CONFIG_EVENT=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_MISC_INIT_R=y
CONFIG_CMD_IMLS=y

View File

@ -33,6 +33,7 @@ CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
CONFIG_SILENT_CONSOLE=y
CONFIG_EVENT=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_MISC_INIT_R=y
CONFIG_CMD_IMLS=y

View File

@ -35,6 +35,7 @@ CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
CONFIG_SILENT_CONSOLE=y
CONFIG_EVENT=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_MISC_INIT_R=y
CONFIG_CMD_IMLS=y

View File

@ -33,6 +33,7 @@ CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
CONFIG_SILENT_CONSOLE=y
CONFIG_EVENT=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_MISC_INIT_R=y
CONFIG_CMD_IMLS=y

View File

@ -23,7 +23,6 @@ CONFIG_CONSOLE_RECORD=y
CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000
CONFIG_PRE_CONSOLE_BUFFER=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_F=y
CONFIG_CMD_CPU=y
CONFIG_CMD_LICENSE=y
CONFIG_CMD_BOOTZ=y

View File

@ -32,7 +32,6 @@ CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000
CONFIG_PRE_CONSOLE_BUFFER=y
CONFIG_LOG=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_F=y
CONFIG_STACKPROTECTOR=y
CONFIG_ANDROID_AB=y
CONFIG_CMD_CPU=y

View File

@ -20,7 +20,6 @@ CONFIG_BOOTSTAGE_STASH_SIZE=0x4096
CONFIG_CONSOLE_RECORD=y
CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_F=y
CONFIG_CMD_CPU=y
CONFIG_CMD_LICENSE=y
CONFIG_CMD_BOOTZ=y

View File

@ -30,7 +30,6 @@ CONFIG_BOOTSTAGE_STASH_SIZE=0x4096
CONFIG_CONSOLE_RECORD=y
CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_F=y
CONFIG_HANDOFF=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_ENV_SUPPORT=y

View File

@ -9,7 +9,6 @@ CONFIG_TIMESTAMP=y
CONFIG_FIT_SIGNATURE=y
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run distro_bootcmd"
CONFIG_MISC_INIT_F=y
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_BOOTM is not set
# CONFIG_CMD_ELF is not set

View File

@ -272,6 +272,4 @@
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Increase map for Linux */
#define CONFIG_MISC_INIT_F
#endif

View File

@ -25,6 +25,9 @@ enum event_t {
EVT_DM_PRE_REMOVE,
EVT_DM_POST_REMOVE,
/* Init hooks */
EVT_MISC_INIT_F,
EVT_COUNT
};

View File

@ -217,7 +217,6 @@ int init_cache_f_r(void);
int print_cpuinfo(void);
#endif
int timer_init(void);
int misc_init_f(void);
#if defined(CONFIG_DTB_RESELECT)
int embedded_dtb_select(void);