Embedded_Projects/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ARM: dts: sync Amlogic GX DT to Linux v6.4

Browse Source 
Sync Amlogic GXBB, GXL & GXM DTs from Linux v6.4, and also
switch to GXL MDIO MUX driver to adapt to DT change,

Most of the changes are only cosmetic or doesn't concern U-Boot,
the most important change for U-Boot is the GXL mdio mux compatible
switch to amlogic,gxl-mdio-mux.

Link: https://lore.kernel.org/r/20231213-u-boot-gxl-mdio-mux-v2-2-c56bb02a75ea@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
This commit is contained in:
Neil Armstrong 2023-12-13 10:30:13 +01:00
parent b4534ddeff
commit 4d4fbf0415
25 changed files with 196 additions and 90 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
arch/arm/dts/meson-gx-libretech-pc.dtsi
View File

@ -17,7 +17,7 @@
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
update-button {
button-update {
label = "update";
linux,code = <KEY_VENDOR>;
press-threshold-microvolt = <1300000>;
@ -416,7 +416,7 @@
pinctrl-names = "default";
status = "okay";
gd25lq128: spi-flash@0 {
gd25lq128: flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;

21
arch/arm/dts/meson-gx.dtsi
View File

@ -49,6 +49,12 @@
no-map;
};
/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
secmon_reserved_bl32: secmon@5300000 {
reg = <0x0 0x05300000 0x0 0x2000000>;
no-map;
};
linux,cma {
compatible = "shared-dma-pool";
reusable;
@ -126,6 +132,7 @@
l2: l2-cache0 {
compatible = "cache";
cache-level = <2>;
};
};
@ -226,7 +233,7 @@
reg = <0x14 0x10>;
};
eth_mac: eth_mac@34 {
eth_mac: eth-mac@34 {
reg = <0x34 0x10>;
};
@ -243,7 +250,7 @@
scpi_clocks: clocks {
compatible = "arm,scpi-clocks";
scpi_dvfs: scpi_clocks@0 {
scpi_dvfs: clocks-0 {
compatible = "arm,scpi-dvfs-clocks";
#clock-cells = <1>;
clock-indices = <0>;
@ -444,7 +451,7 @@
sysctrl_AO: sys-ctrl@0 {
compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
reg = <0x0 0x0 0x0 0x100>;
reg = <0x0 0x0 0x0 0x100>;
clkc_AO: clock-controller {
compatible = "amlogic,meson-gx-aoclkc";
@ -525,7 +532,7 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
hwrng: rng {
hwrng: rng@0 {
compatible = "amlogic,meson-rng";
reg = <0x0 0x0 0x0 0x4>;
};
@ -596,21 +603,21 @@
sd_emmc_a: mmc@70000 {
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
reg = <0x0 0x70000 0x0 0x800>;
interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
sd_emmc_b: mmc@72000 {
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
reg = <0x0 0x72000 0x0 0x800>;
interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
sd_emmc_c: mmc@74000 {
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
reg = <0x0 0x74000 0x0 0x800>;
interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};

13
arch/arm/dts/meson-gxbb-nanopi-k2.dts
View File

@ -385,9 +385,20 @@
/* Bluetooth on AP6212 */
&uart_A {
status = "disabled";
status = "okay";
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
bluetooth {
compatible = "brcm,bcm43438-bt";
clocks = <&wifi_32k>;
clock-names = "lpo";
vbat-supply = <&vddio_ao3v3>;
vddio-supply = <&vddio_ao18>;
host-wakeup-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
};
};
/* 40-pin CON1 */

26
arch/arm/dts/meson-gxbb-odroidc2.dts
View File

@ -250,21 +250,6 @@
};
};
&gpio_ao {
/*
* WARNING: The USB Hub on the Odroid-C2 needs a reset signal
* to be turned high in order to be detected by the USB Controller
* This signal should be handled by a USB specific power sequence
* in order to reset the Hub when USB bus is powered down.
*/
hog-0 {
gpio-hog;
gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "usb-hub-reset";
};
};
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
@ -414,5 +399,16 @@
};
&usb1 {
dr_mode = "host";
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub@1 {
/* Genesys Logic GL852G USB 2.0 hub */
compatible = "usb5e3,610";
reg = <1>;
vdd-supply = <&p5v0>;
reset-gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
};
};

18
arch/arm/dts/meson-gxbb.dtsi
View File

@ -300,8 +300,8 @@
};
&gpio_intc {
compatible = "amlogic,meson-gpio-intc",
"amlogic,meson-gxbb-gpio-intc";
compatible = "amlogic,meson-gxbb-gpio-intc",
"amlogic,meson-gpio-intc";
status = "okay";
};
@ -427,6 +427,20 @@
};
};
spi_idle_high_pins: spi-idle-high-pins {
mux {
groups = "spi_sclk";
bias-pull-up;
};
};
spi_idle_low_pins: spi-idle-low-pins {
mux {
groups = "spi_sclk";
bias-pull-down;
};
};
spi_ss0_pins: spi-ss0 {
mux {
groups = "spi_ss0";

2
arch/arm/dts/meson-gxl-s805x-libretech-ac.dts
View File

@ -298,7 +298,7 @@
pinctrl-0 = <&nor_pins>;
pinctrl-names = "default";
w25q32: spi-flash@0 {
w25q32: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";

12
arch/arm/dts/meson-gxl-s905w-jethome-jethub-j80.dts
View File

@ -86,11 +86,11 @@
};
&efuse {
bt_mac: bt_mac@6 {
bt_mac: bt-mac@6 {
reg = <0x6 0x6>;
};
wifi_mac: wifi_mac@C {
wifi_mac: wifi-mac@c {
reg = <0xc 0x6>;
};
};
@ -213,6 +213,12 @@
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
bluetooth {
compatible = "realtek,rtl8822cs-bt";
enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
};
};
&uart_C {
@ -233,7 +239,7 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c_b_pins>;
pcf8563: pcf8563@51 {
pcf8563: rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
status = "okay";

16
arch/arm/dts/meson-gxl-s905x-khadas-vim.dts
View File

@ -140,7 +140,6 @@
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "xin32k";
};
};
@ -218,20 +217,7 @@
};
&sd_emmc_a {
brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
};
&uart_A {
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
max-speed = <2000000>;
clocks = <&wifi32k>;
clock-names = "lpo";
};
max-frequency = <100000000>;
};
/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */

3
arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts
View File

@ -284,7 +284,7 @@
pinctrl-0 = <&nor_pins>;
pinctrl-names = "default";
nor_4u1: spi-flash@0 {
nor_4u1: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
@ -305,7 +305,6 @@
};
&usb2_phy0 {
pinctrl-names = "default";
phy-supply = <&vcc5v>;
};

68
arch/arm/dts/meson-gxl-s905x-p212.dts
View File

@ -7,11 +7,19 @@
/dts-v1/;
#include "meson-gxl-s905x-p212.dtsi"
#include <dt-bindings/sound/meson-aiu.h>
/ {
compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
model = "Amlogic Meson GXL (S905X) P212 Development Board";
dio2133: analog-amplifier {
compatible = "simple-audio-amplifier";
sound-name-prefix = "AU2";
VCC-supply = <&hdmi_5v>;
enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
};
cvbs-connector {
compatible = "composite-video-connector";
@ -32,6 +40,66 @@
};
};
};
sound {
compatible = "amlogic,gx-sound-card";
model = "S905X-P212";
audio-aux-devs = <&dio2133>;
audio-widgets = "Line", "Lineout";
audio-routing = "AU2 INL", "ACODEC LOLN",
"AU2 INR", "ACODEC LORN",
"Lineout", "AU2 OUTL",
"Lineout", "AU2 OUTR";
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
assigned-clock-parents = <0>, <0>, <0>;
assigned-clock-rates = <294912000>,
<270950400>,
<393216000>;
dai-link-0 {
sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
};
dai-link-1 {
sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
dai-format = "i2s";
mclk-fs = <256>;
codec-0 {
sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
};
codec-1 {
sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
};
};
dai-link-2 {
sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
codec-0 {
sound-dai = <&hdmi_tx>;
};
};
dai-link-3 {
sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
codec-0 {
sound-dai = <&acodec>;
};
};
};
};
&acodec {
AVDD-supply = <&vddio_ao18>;
status = "okay";
};
&aiu {
status = "okay";
};
&cec_AO {

21
arch/arm/dts/meson-gxl-s905x-p212.dtsi
View File

@ -97,6 +97,14 @@
pinctrl-names = "default";
};
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
pinctrl-names = "default";
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
&saradc {
status = "okay";
vref-supply = <&vddio_ao18>;
@ -125,6 +133,11 @@
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
};
/* SD card */
@ -165,14 +178,6 @@
vqmmc-supply = <&vddio_boot>;
};
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
pinctrl-names = "default";
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
/* This is connected to the Bluetooth module: */
&uart_A {
status = "okay";

43
arch/arm/dts/meson-gxl.dtsi
View File

@ -312,8 +312,8 @@
};
&gpio_intc {
compatible = "amlogic,meson-gpio-intc",
"amlogic,meson-gxl-gpio-intc";
compatible = "amlogic,meson-gxl-gpio-intc",
"amlogic,meson-gpio-intc";
status = "okay";
};
@ -429,6 +429,20 @@
};
};
spi_idle_high_pins: spi-idle-high-pins {
mux {
groups = "spi_sclk";
bias-pull-up;
};
};
spi_idle_low_pins: spi-idle-low-pins {
mux {
groups = "spi_sclk";
bias-pull-down;
};
};
spi_ss0_pins: spi-ss0 {
mux {
groups = "spi_ss0";
@ -759,16 +773,23 @@
};
};
eth-phy-mux {
compatible = "mdio-mux-mmioreg", "mdio-mux";
eth_phy_mux: mdio@558 {
reg = <0x0 0x558 0x0 0xc>;
compatible = "amlogic,gxl-mdio-mux";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x55c 0x0 0x4>;
mux-mask = <0xffffffff>;
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "ref";
mdio-parent-bus = <&mdio0>;
internal_mdio: mdio@e40908ff {
reg = <0xe40908ff>;
external_mdio: mdio@0 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
};
internal_mdio: mdio@1 {
reg = <0x1>;
#address-cells = <1>;
#size-cells = <0>;
@ -779,12 +800,6 @@
max-speed = <100>;
};
};
external_mdio: mdio@2009087f {
reg = <0x2009087f>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};

15
arch/arm/dts/meson-gxm-khadas-vim2.dts
View File

@ -52,10 +52,11 @@
gpios = <&gpio GPIODV_14 GPIO_ACTIVE_HIGH
&gpio GPIODV_15 GPIO_ACTIVE_HIGH>;
/* Dummy RPM values since fan is optional */
gpio-fan,speed-map = <0 0
1 1
2 2
3 3>;
gpio-fan,speed-map =
<0 0>,
<1 1>,
<2 2>,
<3 3>;
#cooling-cells = <2>;
};
@ -270,7 +271,6 @@
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "xin32k";
};
};
@ -307,7 +307,8 @@
#size-cells = <0>;
bus-width = <4>;
max-frequency = <60000000>;
cap-sd-highspeed;
max-frequency = <100000000>;
non-removable;
disable-wp;
@ -373,7 +374,7 @@
pinctrl-0 = <&nor_pins>;
pinctrl-names = "default";
w25q32: spi-flash@0 {
w25q32: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "winbond,w25q16", "jedec,spi-nor";

2
arch/arm/dts/meson-gxm-wetek-core2.dts
View File

@ -45,8 +45,6 @@
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
button-power {

2
configs/beelink-gt1-ultimate_defconfig
View File

@ -46,7 +46,7 @@ CONFIG_PHY_REALTEK=y
CONFIG_DM_MDIO=y
CONFIG_DM_MDIO_MUX=y
CONFIG_ETH_DESIGNWARE_MESON8B=y
CONFIG_MDIO_MUX_MMIOREG=y
CONFIG_MDIO_MUX_MESON_GXL=y
CONFIG_MESON_GXL_USB_PHY=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_GXL=y

2
configs/jethub_j80_defconfig
View File

@ -54,7 +54,7 @@ CONFIG_PHY_MESON_GXL=y
CONFIG_DM_MDIO=y
CONFIG_DM_MDIO_MUX=y
CONFIG_ETH_DESIGNWARE_MESON8B=y
CONFIG_MDIO_MUX_MMIOREG=y
CONFIG_MDIO_MUX_MESON_GXL=y
CONFIG_MESON_GXL_USB_PHY=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_GXL=y

2
configs/khadas-vim2_defconfig
View File

@ -51,7 +51,7 @@ CONFIG_PHY_REALTEK=y
CONFIG_DM_MDIO=y
CONFIG_DM_MDIO_MUX=y
CONFIG_ETH_DESIGNWARE_MESON8B=y
CONFIG_MDIO_MUX_MMIOREG=y
CONFIG_MDIO_MUX_MESON_GXL=y
CONFIG_MESON_GXL_USB_PHY=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_GXL=y

2
configs/khadas-vim_defconfig
View File

@ -45,7 +45,7 @@ CONFIG_PHY_MESON_GXL=y
CONFIG_DM_MDIO=y
CONFIG_DM_MDIO_MUX=y
CONFIG_ETH_DESIGNWARE_MESON8B=y
CONFIG_MDIO_MUX_MMIOREG=y
CONFIG_MDIO_MUX_MESON_GXL=y
CONFIG_MESON_GXL_USB_PHY=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_GXL=y

2
configs/libretech-ac_defconfig
View File

@ -57,7 +57,7 @@ CONFIG_PHY_MESON_GXL=y
CONFIG_DM_MDIO=y
CONFIG_DM_MDIO_MUX=y
CONFIG_ETH_DESIGNWARE_MESON8B=y
CONFIG_MDIO_MUX_MMIOREG=y
CONFIG_MDIO_MUX_MESON_GXL=y
CONFIG_MESON_GXL_USB_PHY=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_GXL=y

2
configs/libretech-cc_defconfig
View File

@ -44,7 +44,7 @@ CONFIG_PHY_MESON_GXL=y
CONFIG_DM_MDIO=y
CONFIG_DM_MDIO_MUX=y
CONFIG_ETH_DESIGNWARE_MESON8B=y
CONFIG_MDIO_MUX_MMIOREG=y
CONFIG_MDIO_MUX_MESON_GXL=y
CONFIG_MESON_GXL_USB_PHY=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_GXL=y

2
configs/libretech-cc_v2_defconfig
View File

@ -52,7 +52,7 @@ CONFIG_PHY_MESON_GXL=y
CONFIG_DM_MDIO=y
CONFIG_DM_MDIO_MUX=y
CONFIG_ETH_DESIGNWARE_MESON8B=y
CONFIG_MDIO_MUX_MMIOREG=y
CONFIG_MDIO_MUX_MESON_GXL=y
CONFIG_PHY=y
CONFIG_MESON_GXL_USB_PHY=y
CONFIG_PINCTRL=y

2
configs/libretech-s905d-pc_defconfig
View File

@ -53,7 +53,7 @@ CONFIG_PHY_REALTEK=y
CONFIG_DM_MDIO=y
CONFIG_DM_MDIO_MUX=y
CONFIG_ETH_DESIGNWARE_MESON8B=y
CONFIG_MDIO_MUX_MMIOREG=y
CONFIG_MDIO_MUX_MESON_GXL=y
CONFIG_MESON_GXL_USB_PHY=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_GXL=y

2
configs/libretech-s912-pc_defconfig
View File

@ -52,7 +52,7 @@ CONFIG_PHY_REALTEK=y
CONFIG_DM_MDIO=y
CONFIG_DM_MDIO_MUX=y
CONFIG_ETH_DESIGNWARE_MESON8B=y
CONFIG_MDIO_MUX_MMIOREG=y
CONFIG_MDIO_MUX_MESON_GXL=y
CONFIG_MESON_GXL_USB_PHY=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_GXL=y

2
configs/p212_defconfig
View File

@ -40,7 +40,7 @@ CONFIG_PHY_MESON_GXL=y
CONFIG_DM_MDIO=y
CONFIG_DM_MDIO_MUX=y
CONFIG_ETH_DESIGNWARE_MESON8B=y
CONFIG_MDIO_MUX_MMIOREG=y
CONFIG_MDIO_MUX_MESON_GXL=y
CONFIG_MESON_GXL_USB_PHY=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_GXL=y

2
configs/wetek-core2_defconfig
View File

@ -46,7 +46,7 @@ CONFIG_PHY_REALTEK=y
CONFIG_DM_MDIO=y
CONFIG_DM_MDIO_MUX=y
CONFIG_ETH_DESIGNWARE_MESON8B=y
CONFIG_MDIO_MUX_MMIOREG=y
CONFIG_MDIO_MUX_MESON_GXL=y
CONFIG_MESON_GXL_USB_PHY=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_GXL=y