Embedded_Projects/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

sunxi: dts: arm/arm64: update devicetree files from Linux-v6.4-rc2

Browse Source 
Sync the devicetree files from the official Linux kernel tree, v6.4-rc2.
This is covering both 64-bit and 32-bit Allwinner SoCs with Arm Ltd.
cores, we skip the new RISC-V bits for now, as sunxi RISC-V support
is still work in progress.

Among smaller cosmetic changes, this adds a SATA regulator node which we
need in U-Boot to get rid of hard-coded GPIOs.
Also this updates the Allwinner F1C100s DTs, enabling USB support, and
also adds the DTs for two new boards.

As before, this omits the non-backwards compatible changes to the R_INTC
controller, to remain compatible with older kernels.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
This commit is contained in:
Andre Przywara 2023-04-02 01:17:07 +01:00
parent 0a8a4b8642
commit 57285737cb
20 changed files with 259 additions and 37 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
arch/arm/dts/axp22x.dtsi
View File

@ -67,6 +67,12 @@
status = "disabled";
};
axp_gpio: gpio {
compatible = "x-powers,axp221-gpio";
gpio-controller;
#gpio-cells = <2>;
};
regulators {
/* Default work frequency for buck regulators */
x-powers,dcdc-freq = <3000>;

7
arch/arm/dts/axp809.dtsi
View File

@ -50,4 +50,11 @@
compatible = "x-powers,axp809";
interrupt-controller;
#interrupt-cells = <1>;
axp_gpio: gpio {
compatible = "x-powers,axp809-gpio",
"x-powers,axp221-gpio";
gpio-controller;
#gpio-cells = <2>;
};
};

14
arch/arm/dts/axp81x.dtsi
View File

@ -62,16 +62,6 @@
compatible = "x-powers,axp813-gpio";
gpio-controller;
#gpio-cells = <2>;
gpio0_ldo: gpio0-ldo-pin {
pins = "GPIO0";
function = "ldo";
};
gpio1_ldo: gpio1-ldo-pin {
pins = "GPIO1";
function = "ldo";
};
};
battery_power_supply: battery-power {
@ -144,15 +134,11 @@
};
reg_ldo_io0: ldo-io0 {
pinctrl-names = "default";
pinctrl-0 = <&gpio0_ldo>;
/* Disable by default to avoid conflicts with GPIO */
status = "disabled";
};
reg_ldo_io1: ldo-io1 {
pinctrl-names = "default";
pinctrl-0 = <&gpio1_ldo>;
/* Disable by default to avoid conflicts with GPIO */
status = "disabled";
};

1
arch/arm/dts/sun50i-a64.dtsi
View File

@ -1197,6 +1197,7 @@
compatible = "allwinner,sun50i-a64-mipi-dphy",
"allwinner,sun6i-a31-mipi-dphy";
reg = <0x01ca1000 0x1000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_MIPI_DSI>,
<&ccu CLK_DSI_DPHY>;
clock-names = "bus", "mod";

1
arch/arm/dts/sun50i-h5-orangepi-pc2.dts
View File

@ -3,6 +3,7 @@
/dts-v1/;
#include "sun50i-h5.dtsi"
#include "sun50i-h5-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

2
arch/arm/dts/sun5i-gr8-chip-pro.dts
View File

@ -70,7 +70,7 @@
leds {
compatible = "gpio-leds";
status {
led-0 {
label = "chip-pro:white:status";
gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
default-state = "on";

2
arch/arm/dts/sun5i-r8-chip.dts
View File

@ -70,7 +70,7 @@
leds {
compatible = "gpio-leds";
status {
led-0 {
label = "chip:white:status";
gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
default-state = "on";

12
arch/arm/dts/sun6i-a31.dtsi
View File

@ -820,7 +820,7 @@
clocks = <&ccu CLK_APB2_UART0>;
resets = <&ccu RST_APB2_UART0>;
dmas = <&dma 6>, <&dma 6>;
dma-names = "rx", "tx";
dma-names = "tx", "rx";
status = "disabled";
};
@ -833,7 +833,7 @@
clocks = <&ccu CLK_APB2_UART1>;
resets = <&ccu RST_APB2_UART1>;
dmas = <&dma 7>, <&dma 7>;
dma-names = "rx", "tx";
dma-names = "tx", "rx";
status = "disabled";
};
@ -846,7 +846,7 @@
clocks = <&ccu CLK_APB2_UART2>;
resets = <&ccu RST_APB2_UART2>;
dmas = <&dma 8>, <&dma 8>;
dma-names = "rx", "tx";
dma-names = "tx", "rx";
status = "disabled";
};
@ -859,7 +859,7 @@
clocks = <&ccu CLK_APB2_UART3>;
resets = <&ccu RST_APB2_UART3>;
dmas = <&dma 9>, <&dma 9>;
dma-names = "rx", "tx";
dma-names = "tx", "rx";
status = "disabled";
};
@ -872,7 +872,7 @@
clocks = <&ccu CLK_APB2_UART4>;
resets = <&ccu RST_APB2_UART4>;
dmas = <&dma 10>, <&dma 10>;
dma-names = "rx", "tx";
dma-names = "tx", "rx";
status = "disabled";
};
@ -885,7 +885,7 @@
clocks = <&ccu CLK_APB2_UART5>;
resets = <&ccu RST_APB2_UART5>;
dmas = <&dma 22>, <&dma 22>;
dma-names = "rx", "tx";
dma-names = "tx", "rx";
status = "disabled";
};

2
arch/arm/dts/sun6i-a31s-sina31s.dts
View File

@ -67,7 +67,7 @@
leds {
compatible = "gpio-leds";
status {
led-0 {
label = "sina31s:status:usr";
gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
};

10
arch/arm/dts/sun8i-a23-a33.dtsi
View File

@ -488,7 +488,7 @@
clocks = <&ccu CLK_BUS_UART0>;
resets = <&ccu RST_BUS_UART0>;
dmas = <&dma 6>, <&dma 6>;
dma-names = "rx", "tx";
dma-names = "tx", "rx";
status = "disabled";
};
@ -501,7 +501,7 @@
clocks = <&ccu CLK_BUS_UART1>;
resets = <&ccu RST_BUS_UART1>;
dmas = <&dma 7>, <&dma 7>;
dma-names = "rx", "tx";
dma-names = "tx", "rx";
status = "disabled";
};
@ -514,7 +514,7 @@
clocks = <&ccu CLK_BUS_UART2>;
resets = <&ccu RST_BUS_UART2>;
dmas = <&dma 8>, <&dma 8>;
dma-names = "rx", "tx";
dma-names = "tx", "rx";
status = "disabled";
};
@ -527,7 +527,7 @@
clocks = <&ccu CLK_BUS_UART3>;
resets = <&ccu RST_BUS_UART3>;
dmas = <&dma 9>, <&dma 9>;
dma-names = "rx", "tx";
dma-names = "tx", "rx";
status = "disabled";
};
@ -540,7 +540,7 @@
clocks = <&ccu CLK_BUS_UART4>;
resets = <&ccu RST_BUS_UART4>;
dmas = <&dma 10>, <&dma 10>;
dma-names = "rx", "tx";
dma-names = "tx", "rx";
status = "disabled";
};

1
arch/arm/dts/sun8i-a33.dtsi
View File

@ -278,6 +278,7 @@
dphy: d-phy@1ca1000 {
compatible = "allwinner,sun6i-a31-mipi-dphy";
reg = <0x01ca1000 0x1000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_MIPI_DSI>,
<&ccu CLK_DSI_DPHY>;
clock-names = "bus", "mod";

15
arch/arm/dts/sun8i-a83t-bananapi-m3.dts
View File

@ -105,6 +105,21 @@
/* enables internal regulator and de-asserts reset */
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
};
/*
* Power supply for the SATA disk, behind a USB-SATA bridge.
* Since it is a USB device, there is no consumer in the DT, so we
* have to keep this always on.
*/
regulator-sata-disk-pwr {
compatible = "regulator-fixed";
regulator-name = "sata-disk-pwr";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
enable-active-high;
gpio = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
};
};
&cpu0 {

2
arch/arm/dts/sun8i-h3-beelink-x2.dts
View File

@ -57,7 +57,7 @@
ethernet1 = &sdiowifi;
};
cec-gpio {
cec {
compatible = "cec-gpio";
cec-gpios = <&pio 0 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PA14 */
hdmi-phandle = <&hdmi>;

2
arch/arm/dts/sun8i-h3-nanopi-duo2.dts
View File

@ -57,7 +57,7 @@
regulator-ramp-delay = <50>; /* 4ms */
enable-active-high;
enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
gpios-states = <0x1>;
states = <1100000 0>, <1300000 1>;

6
arch/arm/dts/sun8i-v3s.dtsi
View File

@ -479,7 +479,7 @@
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART0>;
dmas = <&dma 6>, <&dma 6>;
dma-names = "rx", "tx";
dma-names = "tx", "rx";
resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};
@ -492,7 +492,7 @@
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART1>;
dmas = <&dma 7>, <&dma 7>;
dma-names = "rx", "tx";
dma-names = "tx", "rx";
resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};
@ -505,7 +505,7 @@
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART2>;
dmas = <&dma 8>, <&dma 8>;
dma-names = "rx", "tx";
dma-names = "tx", "rx";
resets = <&ccu RST_BUS_UART2>;
pinctrl-0 = <&uart2_pins>;
pinctrl-names = "default";

16
arch/arm/dts/suniv-f1c100s-licheepi-nano.dts
View File

@ -6,6 +6,8 @@
/dts-v1/;
#include "suniv-f1c100s.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Lichee Pi Nano";
compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s";
@ -50,8 +52,22 @@
};
};
&otg_sram {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pe_pins>;
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>; /* PE2 */
status = "okay";
};

32
arch/arm/dts/suniv-f1c100s.dtsi
View File

@ -133,6 +133,32 @@
#size-cells = <0>;
};
usb_otg: usb@1c13000 {
compatible = "allwinner,suniv-f1c100s-musb";
reg = <0x01c13000 0x0400>;
clocks = <&ccu CLK_BUS_OTG>;
resets = <&ccu RST_BUS_OTG>;
interrupts = <26>;
interrupt-names = "mc";
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
allwinner,sram = <&otg_sram 1>;
status = "disabled";
};
usbphy: phy@1c13400 {
compatible = "allwinner,suniv-f1c100s-usb-phy";
reg = <0x01c13400 0x10>;
reg-names = "phy_ctrl";
clocks = <&ccu CLK_USB_PHY0>;
clock-names = "usb0_phy";
resets = <&ccu RST_USB_PHY0>;
reset-names = "usb0_reset";
#phy-cells = <1>;
status = "disabled";
};
ccu: clock@1c20000 {
compatible = "allwinner,suniv-f1c100s-ccu";
reg = <0x01c20000 0x400>;
@ -181,6 +207,12 @@
pins = "PE0", "PE1";
function = "uart0";
};
/omit-if-no-ref/
uart1_pa_pins: uart1-pa-pins {
pins = "PA2", "PA3";
function = "uart1";
};
};
i2c0: i2c@1c27000 {

76
arch/arm/dts/suniv-f1c200s-lctech-pi.dts Normal file
View File

@ -0,0 +1,76 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2022 Arm Ltd,
* based on work:
* Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
*/
/dts-v1/;
#include "suniv-f1c100s.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Lctech Pi F1C200s";
compatible = "lctech,pi-f1c200s", "allwinner,suniv-f1c200s",
"allwinner,suniv-f1c100s";
aliases {
serial0 = &uart1;
};
chosen {
stdout-path = "serial0:115200n8";
};
reg_vcc3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
&mmc0 {
broken-cd;
bus-width = <4>;
disable-wp;
vmmc-supply = <&reg_vcc3v3>;
status = "okay";
};
&otg_sram {
status = "okay";
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pc_pins>;
status = "okay";
flash@0 {
compatible = "spi-nand";
reg = <0>;
spi-max-frequency = <40000000>;
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pa_pins>;
status = "okay";
};
/*
* This is a Type-C socket, but CC1/2 are not connected, and VBUS is connected
* to Vin, which supplies the board. Host mode works (if the board is powered
* otherwise), but peripheral is probably the intention.
*/
&usb_otg {
dr_mode = "peripheral";
status = "okay";
};
&usbphy {
status = "okay";
};

81
arch/arm/dts/suniv-f1c200s-popstick-v1.1.dts Normal file
View File

@ -0,0 +1,81 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
*/
/dts-v1/;
#include "suniv-f1c100s.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
/ {
model = "Popcorn Computer PopStick v1.1";
compatible = "sourceparts,popstick-v1.1", "sourceparts,popstick",
"allwinner,suniv-f1c200s", "allwinner,suniv-f1c100s";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
led {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 4 6 GPIO_ACTIVE_HIGH>; /* PE6 */
linux,default-trigger = "heartbeat";
};
};
reg_vcc3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
&mmc0 {
cd-gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */
bus-width = <4>;
disable-wp;
vmmc-supply = <&reg_vcc3v3>;
status = "okay";
};
&otg_sram {
status = "okay";
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pc_pins>;
status = "okay";
flash@0 {
compatible = "spi-nand";
reg = <0>;
spi-max-frequency = <40000000>;
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pe_pins>;
status = "okay";
};
&usb_otg {
dr_mode = "peripheral";
status = "okay";
};
&usbphy {
status = "okay";
};

8
arch/arm/dts/sunxi-h3-h5.dtsi
View File

@ -709,7 +709,7 @@
clocks = <&ccu CLK_BUS_UART0>;
resets = <&ccu RST_BUS_UART0>;
dmas = <&dma 6>, <&dma 6>;
dma-names = "rx", "tx";
dma-names = "tx", "rx";
status = "disabled";
};
@ -722,7 +722,7 @@
clocks = <&ccu CLK_BUS_UART1>;
resets = <&ccu RST_BUS_UART1>;
dmas = <&dma 7>, <&dma 7>;
dma-names = "rx", "tx";
dma-names = "tx", "rx";
status = "disabled";
};
@ -735,7 +735,7 @@
clocks = <&ccu CLK_BUS_UART2>;
resets = <&ccu RST_BUS_UART2>;
dmas = <&dma 8>, <&dma 8>;
dma-names = "rx", "tx";
dma-names = "tx", "rx";
status = "disabled";
};
@ -748,7 +748,7 @@
clocks = <&ccu CLK_BUS_UART3>;
resets = <&ccu RST_BUS_UART3>;
dmas = <&dma 9>, <&dma 9>;
dma-names = "rx", "tx";
dma-names = "tx", "rx";
status = "disabled";
};