net: sun8i_emac: Drop DM_GPIO checks

DM_GPIO is always enable in U-Boot proper for ARCH_SUNXI, and this
driver is never enabled in SPL, so the condition is always true.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
This commit is contained in:
Samuel Holland 2023-10-31 00:25:46 -05:00 committed by Andre Przywara
parent f054f12089
commit 7b252df7ca

View File

@ -168,9 +168,7 @@ struct emac_eth_dev {
struct clk ephy_clk;
struct reset_ctl tx_rst;
struct reset_ctl ephy_rst;
#if CONFIG_IS_ENABLED(DM_GPIO)
struct gpio_desc reset_gpio;
#endif
struct udevice *phy_reg;
};
@ -617,7 +615,6 @@ err_tx_clk:
return ret;
}
#if CONFIG_IS_ENABLED(DM_GPIO)
static int sun8i_mdio_reset(struct mii_dev *bus)
{
struct udevice *dev = bus->priv;
@ -649,7 +646,6 @@ static int sun8i_mdio_reset(struct mii_dev *bus)
return 0;
}
#endif
static int sun8i_mdio_init(const char *name, struct udevice *priv)
{
@ -664,9 +660,7 @@ static int sun8i_mdio_init(const char *name, struct udevice *priv)
bus->write = sun8i_mdio_write;
snprintf(bus->name, sizeof(bus->name), name);
bus->priv = (void *)priv;
#if CONFIG_IS_ENABLED(DM_GPIO)
bus->reset = sun8i_mdio_reset;
#endif
return mdio_register(bus);
}
@ -783,9 +777,7 @@ static int sun8i_emac_eth_of_to_plat(struct udevice *dev)
const fdt32_t *reg;
int node = dev_of_offset(dev);
int offset = 0;
#if CONFIG_IS_ENABLED(DM_GPIO)
int reset_flags = GPIOD_IS_OUT;
#endif
int ret;
pdata->iobase = dev_read_addr(dev);
@ -872,7 +864,6 @@ static int sun8i_emac_eth_of_to_plat(struct udevice *dev)
printf("%s: Invalid RX delay value %d\n", __func__,
sun8i_pdata->rx_delay_ps);
#if CONFIG_IS_ENABLED(DM_GPIO)
if (fdtdec_get_bool(gd->fdt_blob, dev_of_offset(dev),
"snps,reset-active-low"))
reset_flags |= GPIOD_ACTIVE_LOW;
@ -887,7 +878,6 @@ static int sun8i_emac_eth_of_to_plat(struct udevice *dev)
} else if (ret == -ENOENT) {
ret = 0;
}
#endif
return 0;
}