Embedded_Projects/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

power: Refactor Makefile rules

Browse Source 
Move the power/ rules into drivers/power to avoid clutter in the Makefile
and drivers/Makefile files.

We must select SPL_POWER if SPL_POWER_DOMAIN is used, since the two are
currently independent and boards do not necessarily enable SPL_POWER.

Add a TPL_POWER as well, as that is used by one board.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
This commit is contained in:
Simon Glass 2021-08-08 12:20:29 -06:00 committed by Tom Rini
parent 14c251ffe1
commit a4faf1f563
6 changed files with 25 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
Makefile
View File

@ -815,13 +815,6 @@ libs-y += disk/
libs-y += drivers/
libs-y += drivers/net/
libs-y += drivers/net/phy/
libs-y += drivers/power/ \
drivers/power/domain/ \
drivers/power/fuel_gauge/ \
drivers/power/mfd/ \
drivers/power/pmic/ \
drivers/power/battery/ \
drivers/power/regulator/
libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/

13
common/spl/Kconfig
View File

@ -1038,6 +1038,7 @@ config SPL_POWER
config SPL_POWER_DOMAIN
bool "Support power domain drivers"
select SPL_POWER
help
Enable support for power domain control in SPL. Many SoCs allow
power to be applied to or removed from portions of the SoC (power
@ -1425,6 +1426,18 @@ config TPL_NEEDS_SEPARATE_STACK
Enable, if the TPL stage should not inherit its initial
stack-pointer from the settings for the SPL stage.
config TPL_POWER
bool "Support power drivers"
help
Enable support for power control in TPL. This includes support
for PMICs (Power-management Integrated Circuits) and some of the
features provided by PMICs. In particular, voltage regulators can
be used to enable/disable power and vary its voltage. That can be
useful in TPL to turn on boot peripherals and adjust CPU voltage
so that the clock speed can be increased. This enables the drivers
in drivers/power, drivers/power/pmic and drivers/power/regulator
as part of an TPL build.
config TPL_TEXT_BASE
hex "Base address for the .text section of the TPL stage"
depends on TPL_NEEDS_SEPARATE_TEXT_BASE

2
configs/chromebook_coral_defconfig
View File

@ -44,7 +44,9 @@ CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_CPU=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_PCI=y
CONFIG_SPL_POWER=y
# CONFIG_SPL_SPI_FLASH_TINY is not set
CONFIG_TPL_POWER=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
CONFIG_CMD_PMC=y

5
drivers/Makefile
View File

@ -22,6 +22,7 @@ obj-$(CONFIG_$(SPL_TPL_)PCH) += pch/
obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/
obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/
obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/
obj-$(CONFIG_$(SPL_TPL_)POWER) += power/
obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/
obj-$(CONFIG_$(SPL_TPL_)RTC) += rtc/
obj-$(CONFIG_$(SPL_TPL_)SERIAL) += serial/
@ -32,7 +33,6 @@ obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/
obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/
obj-$(CONFIG_$(SPL_)SYSINFO) += sysinfo/
obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/
obj-$(CONFIG_$(SPL_TPL_)ACPI_PMC) += power/acpi_pmc/
obj-$(CONFIG_XEN) += xen/
obj-$(CONFIG_$(SPL_)FPGA) += fpga/
@ -47,9 +47,6 @@ obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
obj-$(CONFIG_$(SPL_)ALTERA_SDRAM) += ddr/altera/
obj-$(CONFIG_ARCH_IMX8M) += ddr/imx/imx8m/
obj-$(CONFIG_IMX8ULP_DRAM) += ddr/imx/imx8ulp/
obj-$(CONFIG_SPL_POWER) += power/ power/pmic/
obj-$(CONFIG_SPL_POWER) += power/regulator/
obj-$(CONFIG_SPL_POWER_DOMAIN) += power/domain/
obj-$(CONFIG_SPL_DM_RESET) += reset/
obj-$(CONFIG_SPL_ETH) += net/
obj-$(CONFIG_SPL_ETH) += net/phy/

8
drivers/power/Makefile
View File

@ -3,6 +3,14 @@
# Copyright (c) 2009 Wind River Systems, Inc.
# Tom Rix <Tom.Rix at windriver.com>
obj-$(CONFIG_$(SPL_TPL_)ACPI_PMC) += acpi_pmc/
obj-y += battery/
obj-$(CONFIG_$(SPL_TPL_)POWER_DOMAIN) += domain/
obj-y += fuel_gauge/
obj-y += mfd/
obj-y += pmic/
obj-y += regulator/
obj-$(CONFIG_AXP152_POWER) += axp152.o
obj-$(CONFIG_AXP209_POWER) += axp209.o
obj-$(CONFIG_AXP221_POWER) += axp221.o

2
drivers/power/acpi_pmc/Makefile
View File

@ -2,5 +2,5 @@
#
# Copyright 2019 Google LLC
obj-$(CONFIG_$(SPL_TPL_)ACPI_PMC) += acpi-pmc-uclass.o
obj-y += acpi-pmc-uclass.o
obj-$(CONFIG_$(SPL_TPL_)ACPI_PMC_SANDBOX) += sandbox.o pmc_emul.o