arm: mvebu: Add support for Synology DS116 (Armada 385)
Synology DS116 is a NAS based on Marvell Armada 385 SoC. Board Specification: - Marvel MV88F6820 Dual Core at 1.8GHz - 1 GiB DDR3 RAM - 8MB Macronix mx25l6405d SPI flash - I2C - 2x USB 3.0 - 1x GBE LAN port (PHY: Marvell 88E1510) - 1x SATA (6 Gbps) - 3x LED - PIC16F1829 (connected to uart1) - GPIO fan - serial console Note that this patch depends on the add-support for Thecus N2350 patch: https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010-1-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com>
This commit is contained in:
Tony Dinh
Stefan Roese
parent
384e2d396c
commit
b21f87a5a5
|
|
@ -247,6 +247,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += \
|
|||
armada-385-atl-x530.dtb \
|
||||
armada-385-atl-x530DP.dtb \
|
||||
armada-385-db-88f6820-amc.dtb \
|
||||
armada-385-synology-ds116.dtb \
|
||||
armada-385-thecus-n2350.dtb \
|
||||
armada-385-turris-omnia.dtb \
|
||||
armada-388-clearfog.dtb \
|
||||
|
|
|
|||
291
arch/arm/dts/armada-385-synology-ds116.dts
Normal file
291
arch/arm/dts/armada-385-synology-ds116.dts
Normal file
|
|
@ -0,0 +1,291 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
/*
|
||||
* Device Tree file for Synology DS116 NAS
|
||||
*
|
||||
* Copyright (C) 2017 Willy Tarreau <w@1wt.eu>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "armada-385.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
model = "Synology DS116";
|
||||
compatible = "marvell,a385-gp", "marvell,armada385", "marvell,armada380";
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x40000000>; /* 1 GB */
|
||||
};
|
||||
|
||||
soc {
|
||||
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
|
||||
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
|
||||
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
|
||||
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
|
||||
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
|
||||
|
||||
internal-regs {
|
||||
i2c@11000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
|
||||
eeprom@57 {
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x57>;
|
||||
};
|
||||
};
|
||||
|
||||
serial@12000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@12100 {
|
||||
/* A PIC16F1829 is connected to uart1 at 9600 bps,
|
||||
* and takes single-character orders :
|
||||
* "1" : power off // already handled by the poweroff node
|
||||
* "2" : short beep
|
||||
* "3" : long beep
|
||||
* "4" : turn the power LED ON
|
||||
* "5" : flash the power LED
|
||||
* "6" : turn the power LED OFF
|
||||
* "7" : turn the status LED OFF
|
||||
* "8" : turn the status LED ON
|
||||
* "9" : flash the status LED
|
||||
* "A" : flash the motherboard LED (D8)
|
||||
* "B" : turn the motherboard LED OFF
|
||||
* "C" : hard reset
|
||||
*/
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
poweroff@12100 {
|
||||
compatible = "synology,power-off";
|
||||
reg = <0x12100 0x100>;
|
||||
clocks = <&coreclk 0>;
|
||||
};
|
||||
|
||||
ethernet@70000 {
|
||||
pinctrl-names = "default";
|
||||
phy = <&phy0>;
|
||||
phy-mode = "sgmii";
|
||||
buffer-manager = <&bm>;
|
||||
bm,pool-long = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
mdio@72004 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
|
||||
phy0: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
sata@a8000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sata0_pins>;
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
sata0: sata-port@0 {
|
||||
reg = <0>;
|
||||
target-supply = <®_5v_sata0>;
|
||||
};
|
||||
};
|
||||
|
||||
bm@c8000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb3@f0000 {
|
||||
usb-phy = <&usb3_0_phy>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb3@f8000 {
|
||||
usb-phy = <&usb3_1_phy>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
bm-bppi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
gpio-fan {
|
||||
compatible = "gpio-fan";
|
||||
gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio1 17 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio1 16 GPIO_ACTIVE_HIGH>;
|
||||
gpio-fan,speed-map = < 0 0
|
||||
1500 1
|
||||
2500 2
|
||||
3000 3
|
||||
3400 4
|
||||
3700 5
|
||||
3900 6
|
||||
4000 7>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
/* The green part is on gpio0.20 which is also used by
|
||||
* sata0, and accesses to SATA disk 0 make it blink so it
|
||||
* doesn't need to be declared here.
|
||||
*/
|
||||
orange {
|
||||
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
|
||||
label = "ds116:orange:disk";
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
usb3_0_phy: usb3_0_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
vcc-supply = <®_usb3_0_vbus>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
usb3_1_phy: usb3_1_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
vcc-supply = <®_usb3_1_vbus>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
reg_usb3_0_vbus: usb3-vbus0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb3-vbus0";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&xhci0_vbus_pins>;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
reg_usb3_1_vbus: usb3-vbus1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb3-vbus1";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&xhci1_vbus_pins>;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
reg_sata0: pwr-sata0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pwr_en_sata0";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
reg_5v_sata0: v5-sata0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "v5.0-sata0";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <®_sata0>;
|
||||
};
|
||||
|
||||
reg_12v_sata0: v12-sata0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "v12.0-sata0";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
vin-supply = <®_sata0>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi-flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "macronix,mx25l6405d", "jedec,spi-nor";
|
||||
reg = <0>; /* Chip select 0 */
|
||||
spi-max-frequency = <50000000>;
|
||||
m25p,fast-read;
|
||||
|
||||
/* Note: there is a redboot partition table despite u-boot
|
||||
* being used. The names presented here are the same as those
|
||||
* found in the FIS directory. There is also a small device
|
||||
* tree in the last 64kB of the RedBoot partition which is not
|
||||
* enumerated. The MAC address and the serial number are listed
|
||||
* in the "vendor" partition.
|
||||
*/
|
||||
partition@0 {
|
||||
label = "RedBoot";
|
||||
reg = <0x00000000 0x000f0000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@c0000 {
|
||||
label = "zImage";
|
||||
reg = <0x000f0000 0x002d0000>;
|
||||
};
|
||||
|
||||
partition@390000 {
|
||||
label = "rd.gz";
|
||||
reg = <0x003c0000 0x00410000>;
|
||||
};
|
||||
|
||||
partition@7d0000 {
|
||||
label = "vendor";
|
||||
reg = <0x007d0000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@7e0000 {
|
||||
label = "RedBoot config";
|
||||
reg = <0x007e0000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@7f0000 {
|
||||
label = "FIS directory";
|
||||
reg = <0x007f0000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
/* use only one pin for UART1, as mpp20 is used by sata0 */
|
||||
uart1_pins: uart-pins-1 {
|
||||
marvell,pins = "mpp19";
|
||||
marvell,function = "ua1";
|
||||
};
|
||||
|
||||
xhci0_vbus_pins: xhci0_vbus_pins {
|
||||
marvell,pins = "mpp58";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
xhci1_vbus_pins: xhci1_vbus_pins {
|
||||
marvell,pins = "mpp59";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
|
@ -169,6 +169,10 @@ config TARGET_DB_MV784MP_GP
|
|||
select BOARD_ECC_SUPPORT
|
||||
select MV78460
|
||||
|
||||
config TARGET_DS116
|
||||
bool "Support Synology DS116"
|
||||
select 88F6820
|
||||
|
||||
config TARGET_DS414
|
||||
bool "Support Synology DS414"
|
||||
select MV78230
|
||||
|
|
@ -263,6 +267,7 @@ config SYS_BOARD
|
|||
default "mvebu_armada-8k" if TARGET_MVEBU_ARMADA_8K
|
||||
default "octeontx2_cn913x" if TARGET_OCTEONTX2_CN913x
|
||||
default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP
|
||||
default "ds116" if TARGET_DS116
|
||||
default "ds414" if TARGET_DS414
|
||||
default "maxbcm" if TARGET_MAXBCM
|
||||
default "n2350" if TARGET_N2350
|
||||
|
|
@ -283,6 +288,7 @@ config SYS_CONFIG_NAME
|
|||
default "mvebu_armada-8k" if TARGET_MVEBU_ARMADA_8K
|
||||
default "mvebu_armada-8k" if TARGET_OCTEONTX2_CN913x
|
||||
default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP
|
||||
default "ds116" if TARGET_DS116
|
||||
default "ds414" if TARGET_DS414
|
||||
default "maxbcm" if TARGET_MAXBCM
|
||||
default "n2350" if TARGET_N2350
|
||||
|
|
@ -307,6 +313,7 @@ config SYS_VENDOR
|
|||
default "Marvell" if TARGET_MVEBU_DB_88F7040
|
||||
default "solidrun" if TARGET_CLEARFOG
|
||||
default "kobol" if TARGET_HELIOS4
|
||||
default "Synology" if TARGET_DS116
|
||||
default "Synology" if TARGET_DS414
|
||||
default "thecus" if TARGET_N2350
|
||||
default "CZ.NIC" if TARGET_TURRIS_OMNIA
|
||||
|
|
|
|||
7
board/Synology/ds116/MAINTAINERS
Normal file
7
board/Synology/ds116/MAINTAINERS
Normal file
|
|
@ -0,0 +1,7 @@
|
|||
DS116 BOARD
|
||||
M: Tony Dinh <mibodhi@gmail.com>
|
||||
S: Maintained
|
||||
F: arch/arm/dts/armada-385-synology-ds116.dts
|
||||
F: board/Synology/ds116/
|
||||
F: include/configs/ds116.h
|
||||
F: configs/ds116_defconfig
|
||||
6
board/Synology/ds116/Makefile
Normal file
6
board/Synology/ds116/Makefile
Normal file
|
|
@ -0,0 +1,6 @@
|
|||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
# Copyright (C) 2023 Tony Dinh <mibodhi@gmail.com>
|
||||
#
|
||||
|
||||
obj-y := ds116.o
|
||||
135
board/Synology/ds116/ds116.c
Normal file
135
board/Synology/ds116/ds116.c
Normal file
|
|
@ -0,0 +1,135 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (C) 2023 Tony Dinh <mibodhi@gmail.com>
|
||||
*
|
||||
*/
|
||||
|
||||
#include <i2c.h>
|
||||
#include <init.h>
|
||||
#include <miiphy.h>
|
||||
#include <net.h>
|
||||
#include <netdev.h>
|
||||
#include <asm/global_data.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/cpu.h>
|
||||
#include <asm/arch/soc.h>
|
||||
#include <linux/bitops.h>
|
||||
|
||||
#include "../drivers/ddr/marvell/a38x/ddr3_init.h"
|
||||
#include <../serdes/a38x/high_speed_env_spec.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
/*
|
||||
* Those DS116_GPP_xx values and defines in board_serdes_map, and board_topology_map
|
||||
* are taken from Marvell U-Boot version
|
||||
* U-Boot 2013.01-g6cc0a6d (Marvell version: 2015_T1.0p16)
|
||||
*/
|
||||
#define DS116_GPP_OUT_ENA_LOW \
|
||||
(~(BIT(1) | BIT(4) | BIT(6) | BIT(7) | BIT(8) | BIT(9) | \
|
||||
BIT(10) | BIT(11) | BIT(15) | BIT(19) | BIT(22) | BIT(23) | \
|
||||
BIT(25) | BIT(26) | BIT(27) | BIT(29) | BIT(30) | BIT(31)))
|
||||
#define DS116_GPP_OUT_ENA_MID \
|
||||
(~(BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(15) | \
|
||||
BIT(16) | BIT(17) | BIT(18) | BIT(26) | BIT(27)))
|
||||
|
||||
#define DS116_GPP_OUT_VAL_LOW BIT(15)
|
||||
#define DS116_GPP_OUT_VAL_MID (BIT(26) | BIT(27))
|
||||
#define DS116_GPP_POL_LOW 0x0
|
||||
#define DS116_GPP_POL_MID 0x0
|
||||
|
||||
static struct serdes_map board_serdes_map[] = {
|
||||
{SGMII0, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
||||
{SATA0, SERDES_SPEED_6_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
||||
{DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
||||
{DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
||||
{USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
||||
{USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
||||
};
|
||||
|
||||
int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count)
|
||||
{
|
||||
*serdes_map_array = board_serdes_map;
|
||||
*count = ARRAY_SIZE(board_serdes_map);
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Define the DDR layout / topology here in the board file. This will
|
||||
* be used by the DDR3 init code in the SPL U-Boot version to configure
|
||||
* the DDR3 controller.
|
||||
*/
|
||||
static struct mv_ddr_topology_map board_topology_map = {
|
||||
DEBUG_LEVEL_ERROR,
|
||||
0x1, /* active interfaces */
|
||||
/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
|
||||
{ { { {0x1, 0, 0, 0},
|
||||
{0x1, 0, 0, 0},
|
||||
{0x1, 0, 0, 0},
|
||||
{0x1, 0, 0, 0},
|
||||
{0x1, 0, 0, 0} },
|
||||
SPEED_BIN_DDR_1866L, /* speed_bin */
|
||||
MV_DDR_DEV_WIDTH_16BIT, /* memory_width - 16 bits */
|
||||
MV_DDR_DIE_CAP_4GBIT, /* mem_size - DS116 board has 2x512MB DRAM banks */
|
||||
MV_DDR_FREQ_800, /* frequency */
|
||||
0, 0, /* cas_wl cas_l */
|
||||
MV_DDR_TEMP_LOW, /* temperature */
|
||||
MV_DDR_TIM_DEFAULT} }, /* timing */
|
||||
BUS_MASK_32BIT, /* Busses mask */
|
||||
MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
|
||||
NOT_COMBINED, /* ddr twin-die combined */
|
||||
{ {0} }, /* raw spd data */
|
||||
{0} /* timing parameters */
|
||||
};
|
||||
|
||||
struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
|
||||
{
|
||||
/* Return the board topology as defined in the board code */
|
||||
return &board_topology_map;
|
||||
}
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
/*
|
||||
* Those MPP values are taken from the Marvell U-Boot version
|
||||
* U-Boot 2013.01-g6cc0a6d (Marvell version: 2015_T1.0p16)
|
||||
*/
|
||||
|
||||
/* Configure MPP */
|
||||
writel(0x00111111, MVEBU_MPP_BASE + 0x00);
|
||||
writel(0x00000000, MVEBU_MPP_BASE + 0x04);
|
||||
writel(0x11040330, MVEBU_MPP_BASE + 0x08);
|
||||
writel(0x00000011, MVEBU_MPP_BASE + 0x0c);
|
||||
writel(0x00000000, MVEBU_MPP_BASE + 0x10);
|
||||
writel(0x00000000, MVEBU_MPP_BASE + 0x14);
|
||||
writel(0x00000000, MVEBU_MPP_BASE + 0x18);
|
||||
writel(0x00000000, MVEBU_MPP_BASE + 0x1c);
|
||||
|
||||
/* Set GPP Out value */
|
||||
writel(DS116_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
|
||||
writel(DS116_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00);
|
||||
|
||||
/* Set GPP Polarity */
|
||||
writel(DS116_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c);
|
||||
writel(DS116_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c);
|
||||
|
||||
/* Set GPP Out Enable */
|
||||
writel(DS116_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
|
||||
writel(DS116_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
/* address of boot parameters */
|
||||
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_eth_init(struct bd_info *bis)
|
||||
{
|
||||
cpu_eth_init(bis); /* Built in controller(s) come first */
|
||||
return pci_eth_init(bis);
|
||||
}
|
||||
92
configs/ds116_defconfig
Normal file
92
configs/ds116_defconfig
Normal file
|
|
@ -0,0 +1,92 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_CPU_INIT=y
|
||||
CONFIG_SYS_THUMB_BUILD=y
|
||||
CONFIG_ARCH_MVEBU=y
|
||||
CONFIG_SUPPORT_PASSING_ATAGS=y
|
||||
CONFIG_CMDLINE_TAG=y
|
||||
CONFIG_INITRD_TAG=y
|
||||
CONFIG_TEXT_BASE=0x00800000
|
||||
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
||||
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
||||
CONFIG_NR_DRAM_BANKS=2
|
||||
CONFIG_TARGET_DS116=y
|
||||
CONFIG_ENV_SIZE=0x10000
|
||||
CONFIG_ENV_OFFSET=0x7E0000
|
||||
CONFIG_ENV_SECT_SIZE=0x10000
|
||||
CONFIG_DEFAULT_DEVICE_TREE="armada-385-synology-ds116"
|
||||
CONFIG_SPL_TEXT_BASE=0x40000030
|
||||
CONFIG_SYS_PROMPT="DS116> "
|
||||
CONFIG_SPL_SERIAL=y
|
||||
CONFIG_SPL=y
|
||||
CONFIG_DEBUG_UART_BASE=0xf1012000
|
||||
CONFIG_DEBUG_UART_CLOCK=250000000
|
||||
CONFIG_IDENT_STRING="\nSynology DS116"
|
||||
CONFIG_SYS_LOAD_ADDR=0x800000
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_AHCI=y
|
||||
CONFIG_DISTRO_DEFAULTS=y
|
||||
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
||||
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000
|
||||
CONFIG_BOOTDELAY=10
|
||||
CONFIG_USE_PREBOOT=y
|
||||
CONFIG_SYS_CONSOLE_INFO_QUIET=y
|
||||
# CONFIG_DISPLAY_BOARDINFO is not set
|
||||
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
||||
CONFIG_SPL_MAX_SIZE=0x22fd0
|
||||
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
|
||||
CONFIG_SPL_BSS_START_ADDR=0x40023000
|
||||
CONFIG_SPL_BSS_MAX_SIZE=0x4000
|
||||
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
|
||||
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
|
||||
CONFIG_SPL_STACK=0x4002c000
|
||||
CONFIG_SPL_I2C=y
|
||||
CONFIG_SYS_MAXARGS=32
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_GPIO_READ=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_PCI=y
|
||||
CONFIG_CMD_SPI=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_CMD_TFTPPUT=y
|
||||
CONFIG_CMD_SNTP=y
|
||||
CONFIG_CMD_DNS=y
|
||||
CONFIG_CMD_CACHE=y
|
||||
CONFIG_CMD_TIME=y
|
||||
CONFIG_CMD_MTDPARTS=y
|
||||
CONFIG_MTDPARTS_DEFAULT="mtdparts=spi0.0:1m(u-boot),7040k(kernel),64k(u-boot-env),-(data)"
|
||||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_VERSION_VARIABLE=y
|
||||
CONFIG_ARP_TIMEOUT=200
|
||||
CONFIG_NET_RETRY_COUNT=50
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_NETCONSOLE=y
|
||||
CONFIG_SPL_OF_TRANSLATE=y
|
||||
CONFIG_AHCI_MVEBU=y
|
||||
CONFIG_LBA48=y
|
||||
CONFIG_SYS_64BIT_LBA=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_SYS_I2C_MVTWSI=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_SF_DEFAULT_SPEED=50000000
|
||||
CONFIG_SPI_FLASH_MACRONIX=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
CONFIG_PHY_MARVELL=y
|
||||
CONFIG_PHY_GIGE=y
|
||||
CONFIG_MVNETA=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_MVMDIO=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_MVEBU=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_ARMADA_38X=y
|
||||
CONFIG_DM_RTC=y
|
||||
CONFIG_RTC_ARMADA38X=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_SPL_DEBUG_UART_BASE=0xd0012000
|
||||
CONFIG_DEBUG_UART_SHIFT=2
|
||||
CONFIG_SYS_NS16550=y
|
||||
CONFIG_KIRKWOOD_SPI=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
56
include/configs/ds116.h
Normal file
56
include/configs/ds116.h
Normal file
|
|
@ -0,0 +1,56 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0+ */
|
||||
/*
|
||||
* Copyright (C) 2023 Tony Dinh <mibodhi@gmail.com>
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef _CONFIG_DS116_H
|
||||
#define _CONFIG_DS116_H
|
||||
|
||||
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
|
||||
|
||||
/* Keep device tree and initrd in lower memory so the kernel can access them */
|
||||
#define RELOCATION_LIMITS_ENV_SETTINGS \
|
||||
"fdt_high=0x10000000\0" \
|
||||
"initrd_high=0x10000000\0"
|
||||
|
||||
/*
|
||||
* mv-common.h should be defined after CMD configs since it used them
|
||||
* to enable certain macros
|
||||
*/
|
||||
#include "mv-common.h"
|
||||
|
||||
/* Include the common distro boot environment */
|
||||
#ifndef CONFIG_SPL_BUILD
|
||||
|
||||
#define BOOT_TARGET_DEVICES(func) \
|
||||
func(USB, usb, 0) \
|
||||
func(SCSI, scsi, 0) \
|
||||
func(PXE, pxe, na) \
|
||||
func(DHCP, dhcp, na)
|
||||
|
||||
#define KERNEL_ADDR_R __stringify(0x1000000)
|
||||
#define FDT_ADDR_R __stringify(0x2000000)
|
||||
#define RAMDISK_ADDR_R __stringify(0x2200000)
|
||||
#define SCRIPT_ADDR_R __stringify(0x1800000)
|
||||
#define PXEFILE_ADDR_R __stringify(0x1900000)
|
||||
|
||||
#define LOAD_ADDRESS_ENV_SETTINGS \
|
||||
"kernel_addr_r=" KERNEL_ADDR_R "\0" \
|
||||
"fdt_addr_r=" FDT_ADDR_R "\0" \
|
||||
"ramdisk_addr_r=" RAMDISK_ADDR_R "\0" \
|
||||
"scriptaddr=" SCRIPT_ADDR_R "\0" \
|
||||
"pxefile_addr_r=" PXEFILE_ADDR_R "\0"
|
||||
|
||||
#include <config_distro_bootcmd.h>
|
||||
|
||||
#define CFG_EXTRA_ENV_SETTINGS \
|
||||
RELOCATION_LIMITS_ENV_SETTINGS \
|
||||
LOAD_ADDRESS_ENV_SETTINGS \
|
||||
"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
|
||||
"console=ttyS0,115200\0" \
|
||||
BOOTENV
|
||||
|
||||
#endif /* CONFIG_SPL_BUILD */
|
||||
|
||||
#endif /* _CONFIG_DS116_H */
|
||||
Loading…
Reference in New Issue
Block a user