Embedded_Projects/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

board: rockchip: Add Pine64 PineTab2

Browse Source 
The Pine64 PineTab2 is a tablet computer based on the Rockchip RK3566
SoC. The table features 4/8 GB LPDDR4 RAM and 64/128 GB eMMC storage.

Features tested on a Pine64 PineTab2 8GB v2.0:
- SD-card boot
- eMMC boot
- SPI Flash boot
- USB host

Device tree is imported from linux maintainer branch v6.9-armsoc/dts64,
commit 1b7e19448f8f ("arm64: dts: rockchip: Add devicetree for Pine64
PineTab2").

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
Jonas Karlman 2024-02-04 17:30:35 +00:00 committed by Kever Yang
parent b54c3d0dd6
commit c60958d44e
10 changed files with 1202 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/dts/Makefile
View File

@ -174,6 +174,8 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
dtb-$(CONFIG_ROCKCHIP_RK3568) += \
rk3566-anbernic-rgxx3.dtb \
rk3566-pinetab2-v0.1.dtb \
rk3566-pinetab2-v2.0.dtb \
rk3566-quartz64-a.dtb \
rk3566-quartz64-b.dtb \
rk3566-radxa-cm3-io.dtb \

44
arch/arm/dts/rk3566-pinetab2-u-boot.dtsi Normal file
View File

@ -0,0 +1,44 @@
// SPDX-License-Identifier: GPL-2.0+
#include "rk356x-u-boot.dtsi"
&fspi_dual_io_pins {
bootph-all;
};
&gpio0 {
bootph-all;
};
&i2c0 {
bootph-pre-ram;
};
&rk817 {
bootph-pre-ram;
regulators {
bootph-pre-ram;
};
};
&sdhci {
cap-mmc-highspeed;
};
&sdmmc_pwren_l {
bootph-all;
};
&sfc {
bootph-pre-ram;
u-boot,spl-sfc-no-dma;
flash@0 {
bootph-pre-ram;
};
};
&vcc3v3_sd {
bootph-pre-ram;
};

3
arch/arm/dts/rk3566-pinetab2-v0.1-u-boot.dtsi Normal file
View File

@ -0,0 +1,3 @@
// SPDX-License-Identifier: GPL-2.0+
#include "rk3566-pinetab2-u-boot.dtsi"

28
arch/arm/dts/rk3566-pinetab2-v0.1.dts Normal file
View File

@ -0,0 +1,28 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/dts-v1/;
#include "rk3566-pinetab2.dtsi"
/ {
model = "Pine64 PineTab2 v0.1";
compatible = "pine64,pinetab2-v0.1", "pine64,pinetab2", "rockchip,rk3566";
};
&lcd {
reset-gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_pwren_h &lcd0_rst_l>;
};
&pinctrl {
lcd0 {
lcd0_rst_l: lcd0-rst-l {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&sdmmc1 {
vmmc-supply = <&vcc3v3_sys>;
};

3
arch/arm/dts/rk3566-pinetab2-v2.0-u-boot.dtsi Normal file
View File

@ -0,0 +1,3 @@
// SPDX-License-Identifier: GPL-2.0+
#include "rk3566-pinetab2-u-boot.dtsi"

48
arch/arm/dts/rk3566-pinetab2-v2.0.dts Normal file
View File

@ -0,0 +1,48 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/dts-v1/;
#include "rk3566-pinetab2.dtsi"
/ {
model = "Pine64 PineTab2 v2.0";
compatible = "pine64,pinetab2-v2.0", "pine64,pinetab2", "rockchip,rk3566";
};
&gpio_keys {
pinctrl-0 = <&kb_id_det>, <&hall_int_l>;
event-hall-sensor {
debounce-interval = <20>;
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
label = "Hall Sensor";
linux,code = <SW_LID>;
linux,input-type = <EV_SW>;
wakeup-event-action = <EV_ACT_DEASSERTED>;
wakeup-source;
};
};
&lcd {
reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_pwren_h &lcd0_rst_l>;
};
&pinctrl {
lcd0 {
lcd0_rst_l: lcd0-rst-l {
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
hall {
hall_int_l: hall-int-l {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&sdmmc1 {
vmmc-supply = <&vcc_sys>;
};

943
arch/arm/dts/rk3566-pinetab2.dtsi Normal file
View File

@ -0,0 +1,943 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include <dt-bindings/usb/pd.h>
#include "rk3566.dtsi"
/ {
chassis-type = "tablet";
aliases {
mmc0 = &sdhci;
mmc1 = &sdmmc0;
};
chosen {
stdout-path = "serial2:1500000n8";
};
adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 0>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
poll-interval = <25>;
button-vol-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
press-threshold-microvolt = <297500>;
};
button-vol-down {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
press-threshold-microvolt = <1750>;
};
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm4 0 25000 0>;
brightness-levels = <20 220>;
num-interpolated-steps = <200>;
default-brightness-level = <100>;
power-supply = <&vcc_sys>;
};
battery: battery {
compatible = "simple-battery";
charge-full-design-microamp-hours = <6000000>;
charge-term-current-microamp = <300000>;
constant-charge-current-max-microamp = <2000000>;
constant-charge-voltage-max-microvolt = <4300000>;
voltage-max-design-microvolt = <4350000>;
voltage-min-design-microvolt = <3400000>;
ocv-capacity-celsius = <20>;
ocv-capacity-table-0 = <4322000 100>, <4250000 95>, <4192000 90>, <4136000 85>,
<4080000 80>, <4022000 75>, <3972000 70>, <3928000 65>,
<3885000 60>, <3833000 55>, <3798000 50>, <3780000 45>,
<3776000 40>, <3773000 35>, <3755000 30>, <3706000 25>,
<3640000 20>, <3589000 15>, <3535000 10>, <3492000 5>,
<3400000 0>;
};
gpio_keys: gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&kb_id_det>;
tablet-mode-switch {
debounce-interval = <20>;
gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
label = "Tablet Mode";
linux,input-type = <EV_SW>;
linux,code = <SW_TABLET_MODE>;
};
};
hdmi-connector {
compatible = "hdmi-connector";
type = "d";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
led-0 {
compatible = "regulator-led";
vled-supply = <&vcc5v0_flashled>;
color = <LED_COLOR_ID_WHITE>;
function = LED_FUNCTION_FLASH;
};
rk817-sound {
compatible = "simple-audio-card";
pinctrl-names = "default";
pinctrl-0 = <&hp_det_l>;
simple-audio-card,format = "i2s";
simple-audio-card,name = "rk817_ext";
simple-audio-card,mclk-fs = <256>;
simple-audio-card,widgets =
"Microphone", "Mic Jack",
"Headphone", "Headphones",
"Speaker", "Internal Speakers";
simple-audio-card,routing =
"MICR", "Mic Jack",
"Headphones", "HPOL",
"Headphones", "HPOR",
"Internal Speakers", "Speaker Amplifier OUTL",
"Internal Speakers", "Speaker Amplifier OUTR",
"Speaker Amplifier INL", "HPOL",
"Speaker Amplifier INR", "HPOR";
simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
simple-audio-card,aux-devs = <&speaker_amp>;
simple-audio-card,pin-switches = "Internal Speakers";
simple-audio-card,cpu {
sound-dai = <&i2s1_8ch>;
};
simple-audio-card,codec {
sound-dai = <&rk817>;
};
};
speaker_amp: speaker-amplifier {
compatible = "simple-audio-amplifier";
pinctrl-names = "default";
pinctrl-0 = <&spk_ctl>;
enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
sound-name-prefix = "Speaker Amplifier";
VCC-supply = <&vcc_bat>;
};
vcc_3v3: vcc-3v3-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_3v3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc3v3_sys>;
};
vcc3v3_minipcie: vcc3v3-minipcie-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_pwren_h>;
regulator-name = "vcc3v3_minipcie";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_sys>;
};
vcc3v3_sd: vcc3v3-sd-regulator {
compatible = "regulator-fixed";
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwren_l>;
regulator-name = "vcc3v3_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc3v3_sys>;
};
vcc5v0_flashled: vcc5v0-flashled-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&flash_led_en_h>;
regulator-name = "vcc5v0_flashled";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v_midu>;
};
vcc5v0_usb_host0: vcc5v0-usb-host0-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb_host_pwren1_h>;
regulator-name = "vcc5v0_usb_host0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v_midu>;
};
vcc5v0_usb_host2: vcc5v0-usb-host2-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb_host_pwren2_h>;
regulator-name = "vcc5v0_usb_host2";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v_midu>;
};
vcc_bat: vcc-bat-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_bat";
regulator-always-on;
regulator-boot-on;
};
vcc_sys: vcc-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-always-on;
regulator-boot-on;
vin-supply = <&vcc_bat>;
};
vdd1v2_dvp: vdd1v2-dvp-regulator {
compatible = "regulator-fixed";
regulator-name = "vdd1v2_dvp";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
vin-supply = <&vcc_3v3>;
};
};
&combphy1 {
status = "okay";
};
&combphy2 {
status = "okay";
};
&cpu0 {
cpu-supply = <&vdd_cpu>;
};
&cpu1 {
cpu-supply = <&vdd_cpu>;
};
&cpu2 {
cpu-supply = <&vdd_cpu>;
};
&cpu3 {
cpu-supply = <&vdd_cpu>;
};
&cru {
assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
<&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
assigned-clock-rates = <32768>, <1200000000>, <200000000>, <500000000>;
assigned-clock-parents = <&pmucru CLK_RTC32K_FRAC>;
};
&csi_dphy {
status = "okay";
};
&dsi0 {
status = "okay";
clock-master;
#address-cells = <1>;
#size-cells = <0>;
lcd: panel@0 {
compatible = "boe,th101mb31ig002-28a";
reg = <0>;
backlight = <&backlight>;
enable-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
rotation = <90>;
power-supply = <&vcc_3v3>;
port@0 {
panel_in_dsi: endpoint@0 {
remote-endpoint = <&dsi0_out_con>;
};
};
};
};
&dsi0_in {
dsi0_in_vp1: endpoint {
remote-endpoint = <&vp1_out_dsi0>;
};
};
&dsi0_out {
dsi0_out_con: endpoint {
remote-endpoint = <&panel_in_dsi>;
};
};
&dsi_dphy0 {
status = "okay";
};
&gpu {
mali-supply = <&vdd_gpu_npu>;
status = "okay";
};
&hdmi {
avdd-0v9-supply = <&vdda_0v9_p>;
avdd-1v8-supply = <&vcc_1v8>;
status = "okay";
};
&hdmi_in {
hdmi_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi>;
};
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&hdmi_sound {
status = "okay";
};
&i2c0 {
clock-frequency = <400000>;
status = "okay";
vdd_cpu: regulator@1c {
compatible = "tcs,tcs4525";
reg = <0x1c>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1150000>;
regulator-ramp-delay = <2300>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vcc_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
rk817: pmic@20 {
compatible = "rockchip,rk817";
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
clock-names = "mclk";
clocks = <&cru I2S1_MCLKOUT_TX>;
clock-output-names = "rk808-clkout1", "rk808-clkout2";
#clock-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
rockchip,system-power-controller;
#sound-dai-cells = <0>;
wakeup-source;
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
vcc3-supply = <&vcc_sys>;
vcc4-supply = <&vcc_sys>;
vcc5-supply = <&vcc_sys>;
vcc6-supply = <&vcc_sys>;
vcc7-supply = <&vcc_sys>;
vcc8-supply = <&vcc_sys>;
vcc9-supply = <&vcc5v_midu>;
regulators {
vdd_logic: DCDC_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_logic";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_gpu_npu: DCDC_REG2 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_gpu_npu";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-name = "vcc_ddr";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc3v3_sys: DCDC_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-initial-mode = <0x2>;
regulator-name = "vcc3v3_sys";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcca1v8_pmu: LDO_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcca1v8_pmu";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vdda_0v9_p: LDO_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda_0v9_p";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_pmu: LDO_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda0v9_pmu";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vccio_acodec: LDO_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_acodec";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd: LDO_REG5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_sd";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_pmu: LDO_REG6 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc3v3_pmu";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_1v8: LDO_REG7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_1v8";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc1v8_dvp: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc1v8_dvp";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc2v8_dvp: LDO_REG9 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "vcc2v8_dvp";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc5v_midu: BOOST {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-name = "boost";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vbus: OTG_SWITCH {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-name = "otg_switch";
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
charger {
monitored-battery = <&battery>;
rockchip,resistor-sense-micro-ohms = <10000>;
rockchip,sleep-enter-current-microamp = <300000>;
rockchip,sleep-filter-current-microamp = <100000>;
};
};
};
&i2c1 {
clock-frequency = <400000>;
status = "okay";
touchscreen@5d {
compatible = "goodix,gt911";
reg = <0x5d>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PB0 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&tp_int_l_pmuio2>, <&tp_rst_l_pmuio2>;
AVDD28-supply = <&vcc3v3_pmu>;
VDDIO-supply = <&vcca1v8_pmu>;
irq-gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
};
};
&i2c2 {
clock-frequency = <400000>;
pinctrl-0 = <&i2c2m1_xfer>;
status = "okay";
vcm@c {
compatible = "dongwoon,dw9714";
reg = <0x0c>;
vcc-supply = <&vcc1v8_dvp>;
};
camera@36 {
compatible = "ovti,ov5648";
reg = <0x36>;
pinctrl-names = "default";
pinctrl-0 = <&camerab_pdn_l &camerab_rst_l>;
clocks = <&cru CLK_CIF_OUT>;
assigned-clocks = <&cru CLK_CIF_OUT>;
assigned-clock-rates = <24000000>;
avdd-supply = <&vcc2v8_dvp>;
dvdd-supply = <&vdd1v2_dvp>;
dovdd-supply = <&vcc1v8_dvp>;
powerdown-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>;
port {
endpoint {
data-lanes = <1 2>;
remote-endpoint = <0>;
link-frequencies = /bits/ 64 <210000000 168000000>;
};
};
};
};
&i2c5 {
clock-frequency = <400000>;
status = "okay";
accelerometer@18 {
compatible = "silan,sc7a20";
reg = <0x18>;
interrupt-parent = <&gpio3>;
interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&gsensor_int_l>;
st,drdy-int-pin = <1>;
vdd-supply = <&vcc_1v8>;
vddio-supply = <&vcc_1v8>;
mount-matrix = "1", "0", "0",
"0", "0", "1",
"0", "1", "0";
};
};
&i2s0_8ch {
status = "okay";
};
&i2s1_8ch {
pinctrl-names = "default";
pinctrl-0 = <&i2s1m0_sclktx
&i2s1m0_lrcktx
&i2s1m0_sdi0
&i2s1m0_sdo0>;
rockchip,trcm-sync-tx-only;
status = "okay";
};
&pcie2x1 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_reset_h>;
reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_minipcie>;
status = "okay";
};
&pinctrl {
camerab {
camerab_pdn_l: camerab-pdn-l {
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
camerab_rst_l: camerab-rst-l {
rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
cameraf {
cameraf_pdn_l: cameraf-pdn-l {
rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
cameraf_rst_l: cameraf-rst-l {
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
flash {
flash_led_en_h: flash-led-en-h {
rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
fspi {
fspi_dual_io_pins: fspi-dual-io-pins {
rockchip,pins =
/* fspi_clk */
<1 RK_PD0 1 &pcfg_pull_none>,
/* fspi_cs0n */
<1 RK_PD3 1 &pcfg_pull_none>,
/* fspi_d0 */
<1 RK_PD1 1 &pcfg_pull_none>,
/* fspi_d1 */
<1 RK_PD2 1 &pcfg_pull_none>;
};
};
gsensor {
gsensor_int_l: gsensor-int-l {
rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
kb {
kb_id_det: kb-id-det {
rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
lcd {
lcd_pwren_h: lcd-pwren-h {
rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pcie {
pcie_pwren_h: pcie-pwren-h {
rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
};
pcie_reset_h: pcie-reset-h {
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
sdmmc {
sdmmc_pwren_l: sdmmc-pwren-l {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sound {
hp_det_l: hp-det-l {
rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
spk_ctl: spk-ctl {
rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
tp {
tp_int_l_pmuio2: tp-int-l-pmuio2 {
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
tp_rst_l_pmuio2: tp-rst-l-pmuio2 {
rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
usbcc_int_l: usbcc-int-l {
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
usb_host_pwren1_h: usb-host-pwren1-h {
rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
};
usb_host_pwren2_h: usb-host-pwren2-h {
rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
wifi {
host_wake_wl: host-wake-wl {
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
};
wifi_wake_host_h: wifi-wake-host-h {
rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
};
&pmu_io_domains {
pmuio1-supply = <&vcc3v3_pmu>;
pmuio2-supply = <&vcca1v8_pmu>;
vccio1-supply = <&vccio_acodec>;
vccio2-supply = <&vcc_1v8>;
vccio3-supply = <&vccio_sd>;
vccio4-supply = <&vcc_1v8>;
vccio5-supply = <&vcc_1v8>;
vccio6-supply = <&vcc1v8_dvp>;
vccio7-supply = <&vcc_3v3>;
status = "okay";
};
&pwm4 {
status = "okay";
};
&saradc {
vref-supply = <&vcc_1v8>;
status = "okay";
};
&sdhci {
bus-width = <8>;
no-sdio;
no-sd;
non-removable;
max-frequency = <200000000>;
mmc-hs200-1_8v;
pinctrl-names = "default";
pinctrl-0 = <&emmc_bus8
&emmc_clk
&emmc_cmd
&emmc_datastrobe
&emmc_rstnout>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vcc_1v8>;
status = "okay";
};
&sdmmc0 {
bus-width = <4>;
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_bus4
&sdmmc0_clk
&sdmmc0_cmd
&sdmmc0_det>;
sd-uhs-sdr104;
vmmc-supply = <&vcc3v3_sd>;
vqmmc-supply = <&vccio_sd>;
status = "okay";
};
&sdmmc1 {
bus-width = <4>;
cap-sd-highspeed;
cap-sdio-irq;
keep-power-in-suspend;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc1_bus4
&sdmmc1_cmd
&sdmmc1_clk>;
sd-uhs-sdr104;
vqmmc-supply = <&vcca1v8_pmu>;
status = "okay";
};
&sfc {
pinctrl-names = "default";
pinctrl-0 = <&fspi_dual_io_pins>;
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <100000000>;
spi-rx-bus-width = <2>;
spi-tx-bus-width = <1>;
};
};
&tsadc {
rockchip,hw-tshut-mode = <1>;
rockchip,hw-tshut-polarity = <0>;
status = "okay";
};
&uart2 {
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host0_xhci {
status = "okay";
};
&usb_host1_xhci {
status = "okay";
};
&usb2phy0 {
status = "okay";
};
&usb2phy0_host {
phy-supply = <&vcc5v0_usb_host0>;
status = "okay";
};
&usb2phy0_otg {
status = "okay";
};
&usb2phy1 {
status = "okay";
};
&usb2phy1_otg {
phy-supply = <&vcc5v0_usb_host2>;
status = "okay";
};
&vop {
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
status = "okay";
};
&vop_mmu {
status = "okay";
};
&vp0 {
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi_in_vp0>;
};
};
&vp1 {
vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
reg = <ROCKCHIP_VOP2_EP_MIPI0>;
remote-endpoint = <&dsi0_in_vp1>;
};
};

11
board/pine64/quartz64_rk3566/MAINTAINERS
View File

@ -21,3 +21,14 @@ F: arch/arm/dts/rk3566-soquartz-cm4.dts
F: arch/arm/dts/rk3566-soquartz-cm4-u-boot.dtsi
F: arch/arm/dts/rk3566-soquartz-model-a.dts
F: arch/arm/dts/rk3566-soquartz-model-a-u-boot.dtsi
PINETAB2-RK3566
M: Jonas Karlman <jonas@kwiboo.se>
S: Maintained
F: configs/pinetab2-rk3566_defconfig
F: arch/arm/dts/rk3566-pinetab2.dtsi
F: arch/arm/dts/rk3566-pinetab2-u-boot.dtsi
F: arch/arm/dts/rk3566-pinetab2-v0.1.dts
F: arch/arm/dts/rk3566-pinetab2-v0.1-u-boot.dtsi
F: arch/arm/dts/rk3566-pinetab2-v2.0.dts
F: arch/arm/dts/rk3566-pinetab2-v2.0-u-boot.dtsi

119
configs/pinetab2-rk3566_defconfig Normal file
View File

@ -0,0 +1,119 @@
CONFIG_ARM=y
CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_COUNTER_FREQUENCY=24000000
CONFIG_ARCH_ROCKCHIP=y
CONFIG_TEXT_BASE=0x00a00000
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
CONFIG_SF_DEFAULT_SPEED=24000000
CONFIG_SF_DEFAULT_MODE=0x1000
CONFIG_DEFAULT_DEVICE_TREE="rk3566-pinetab2-v2.0"
CONFIG_ROCKCHIP_RK3568=y
CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y
CONFIG_ROCKCHIP_SPI_IMAGE=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_STACK_R_ADDR=0x600000
CONFIG_TARGET_QUARTZ64_RK3566=y
CONFIG_SPL_STACK=0x400000
CONFIG_DEBUG_UART_BASE=0xFE660000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_SYS_LOAD_ADDR=0xc00800
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_FIT_SIGNATURE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-pinetab2-v2.0.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_MAX_SIZE=0x40000
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0x4000000
CONFIG_SPL_BSS_MAX_SIZE=0x4000
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_I2C=y
CONFIG_SPL_POWER=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
CONFIG_SPL_ATF=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_POWEROFF=y
CONFIG_CMD_USB=y
CONFIG_CMD_ROCKUSB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
CONFIG_OF_LIST="rk3566-pinetab2-v0.1 rk3566-pinetab2-v2.0"
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_REGMAP=y
CONFIG_SPL_SYSCON=y
CONFIG_BUTTON=y
CONFIG_BUTTON_ADC=y
CONFIG_BUTTON_GPIO=y
CONFIG_SPL_CLK=y
# CONFIG_USB_FUNCTION_FASTBOOT is not set
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MISC=y
CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_ROCKCHIP=y
CONFIG_SF_DEFAULT_BUS=4
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
CONFIG_SPI_FLASH_SILICONKAISER=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
CONFIG_SPL_PINCTRL=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_RK8XX=y
CONFIG_SPL_PMIC_RK8XX=y
CONFIG_SPL_DM_REGULATOR=y
CONFIG_SPL_DM_REGULATOR_FIXED=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_SPL_RAM=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYS_NS16550_MEM32=y
CONFIG_ROCKCHIP_SFC=y
CONFIG_SYSRESET=y
CONFIG_SYSRESET_PSCI=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_ASIX88179=y
CONFIG_USB_ETHER_RTL8152=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_PRODUCT_NUM=0x350a
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_USB_FUNCTION_ROCKUSB=y
CONFIG_ERRNO_STR=y

1
doc/board/rockchip/rockchip.rst
View File

@ -98,6 +98,7 @@ List of mainline supported Rockchip boards:
* rk3566
- Anbernic RGxx3 (anbernic-rgxx3-rk3566)
- Pine64 PineTab2 (pinetab2-rk3566)
- Pine64 Quartz64-A Board (quartz64-a-rk3566)
- Pine64 Quartz64-B Board (quartz64-b-rk3566)
- Pine64 SOQuartz on Blade (soquartz-blade-rk3566)