mtd: nand: raw: Fix (most) Kconfig indentation
One tab in general. One tab plus two spaces for help text. Link: https://lore.kernel.org/all/20240320090214.40465-4-ada@thorsis.com Signed-off-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
This commit is contained in:
parent
29b7efae50
commit
e3b7545eb1
|
@ -1,6 +1,6 @@
|
|||
|
||||
menuconfig MTD_RAW_NAND
|
||||
bool "Raw NAND Device Support"
|
||||
|
||||
if MTD_RAW_NAND
|
||||
|
||||
config SYS_NAND_SELF_INIT
|
||||
|
@ -49,12 +49,12 @@ config SYS_NAND_NO_SUBPAGE_WRITE
|
|||
depends on NAND_ARASAN || NAND_DAVINCI || NAND_KIRKWOOD
|
||||
|
||||
config DM_NAND_ATMEL
|
||||
bool "Support Atmel NAND controller with DM support"
|
||||
select SYS_NAND_SELF_INIT
|
||||
imply SYS_NAND_USE_FLASH_BBT
|
||||
help
|
||||
Enable this driver for NAND flash platforms using an Atmel NAND
|
||||
controller.
|
||||
bool "Support Atmel NAND controller with DM support"
|
||||
select SYS_NAND_SELF_INIT
|
||||
imply SYS_NAND_USE_FLASH_BBT
|
||||
help
|
||||
Enable this driver for NAND flash platforms using an Atmel NAND
|
||||
controller.
|
||||
|
||||
config NAND_ATMEL
|
||||
bool "Support Atmel NAND controller"
|
||||
|
@ -133,35 +133,35 @@ config NAND_BRCMNAND_6753
|
|||
Enable support for broadcom nand driver on bcm6753.
|
||||
|
||||
config NAND_BRCMNAND_68360
|
||||
bool "Support Broadcom NAND controller on bcm68360"
|
||||
depends on NAND_BRCMNAND && BCM6856
|
||||
help
|
||||
Enable support for broadcom nand driver on bcm68360.
|
||||
bool "Support Broadcom NAND controller on bcm68360"
|
||||
depends on NAND_BRCMNAND && BCM6856
|
||||
help
|
||||
Enable support for broadcom nand driver on bcm68360.
|
||||
|
||||
config NAND_BRCMNAND_6838
|
||||
bool "Support Broadcom NAND controller on bcm6838"
|
||||
depends on NAND_BRCMNAND && ARCH_BMIPS && SOC_BMIPS_BCM6838
|
||||
help
|
||||
Enable support for broadcom nand driver on bcm6838.
|
||||
bool "Support Broadcom NAND controller on bcm6838"
|
||||
depends on NAND_BRCMNAND && ARCH_BMIPS && SOC_BMIPS_BCM6838
|
||||
help
|
||||
Enable support for broadcom nand driver on bcm6838.
|
||||
|
||||
config NAND_BRCMNAND_6858
|
||||
bool "Support Broadcom NAND controller on bcm6858"
|
||||
depends on NAND_BRCMNAND && BCM6858
|
||||
help
|
||||
Enable support for broadcom nand driver on bcm6858.
|
||||
bool "Support Broadcom NAND controller on bcm6858"
|
||||
depends on NAND_BRCMNAND && BCM6858
|
||||
help
|
||||
Enable support for broadcom nand driver on bcm6858.
|
||||
|
||||
config NAND_BRCMNAND_63158
|
||||
bool "Support Broadcom NAND controller on bcm63158"
|
||||
depends on NAND_BRCMNAND && BCM63158
|
||||
help
|
||||
Enable support for broadcom nand driver on bcm63158.
|
||||
bool "Support Broadcom NAND controller on bcm63158"
|
||||
depends on NAND_BRCMNAND && BCM63158
|
||||
help
|
||||
Enable support for broadcom nand driver on bcm63158.
|
||||
|
||||
config NAND_BRCMNAND_IPROC
|
||||
bool "Support Broadcom NAND controller on the iproc family"
|
||||
depends on NAND_BRCMNAND
|
||||
help
|
||||
Enable support for broadcom nand driver on the Broadcom
|
||||
iproc family such as Northstar (BCM5301x, BCM4708...)
|
||||
bool "Support Broadcom NAND controller on the iproc family"
|
||||
depends on NAND_BRCMNAND
|
||||
help
|
||||
Enable support for broadcom nand driver on the Broadcom
|
||||
iproc family such as Northstar (BCM5301x, BCM4708...)
|
||||
|
||||
config NAND_DAVINCI
|
||||
bool "Support TI Davinci NAND controller"
|
||||
|
@ -413,10 +413,10 @@ config NAND_VF610_NFC
|
|||
if NAND_VF610_NFC
|
||||
|
||||
config NAND_VF610_NFC_DT
|
||||
bool "Support Vybrid's vf610 NAND controller as a DT device"
|
||||
depends on OF_CONTROL && DM_MTD
|
||||
help
|
||||
Enable the driver for Vybrid's vf610 NAND flash on platforms
|
||||
bool "Support Vybrid's vf610 NAND controller as a DT device"
|
||||
depends on OF_CONTROL && DM_MTD
|
||||
help
|
||||
Enable the driver for Vybrid's vf610 NAND flash on platforms
|
||||
using device tree.
|
||||
|
||||
choice
|
||||
|
@ -472,11 +472,11 @@ config NAND_SUNXI
|
|||
select SPL_NAND_SUPPORT
|
||||
select SPL_SYS_NAND_SELF_INIT
|
||||
imply CMD_NAND
|
||||
---help---
|
||||
Enable support for NAND. This option enables the standard and
|
||||
SPL drivers.
|
||||
The SPL driver only supports reading from the NAND using DMA
|
||||
transfers.
|
||||
help
|
||||
Enable support for NAND. This option enables the standard and
|
||||
SPL drivers.
|
||||
The SPL driver only supports reading from the NAND using DMA
|
||||
transfers.
|
||||
|
||||
if NAND_SUNXI
|
||||
|
||||
|
@ -586,16 +586,16 @@ config NAND_OCTEONTX
|
|||
select SYS_NAND_SELF_INIT
|
||||
imply CMD_NAND
|
||||
help
|
||||
This enables Nand flash controller hardware found on the OcteonTX
|
||||
processors.
|
||||
This enables Nand flash controller hardware found on the OcteonTX
|
||||
processors.
|
||||
|
||||
config NAND_OCTEONTX_HW_ECC
|
||||
bool "Support Hardware ECC for OcteonTX NAND controller"
|
||||
depends on NAND_OCTEONTX
|
||||
default y
|
||||
help
|
||||
This enables Hardware BCH engine found on the OcteonTX processors to
|
||||
support ECC for NAND flash controller.
|
||||
This enables Hardware BCH engine found on the OcteonTX processors to
|
||||
support ECC for NAND flash controller.
|
||||
|
||||
config NAND_STM32_FMC2
|
||||
bool "Support for NAND controller on STM32MP SoCs"
|
||||
|
@ -760,37 +760,37 @@ config SYS_NAND_BAD_BLOCK_POS
|
|||
config SYS_NAND_U_BOOT_LOCATIONS
|
||||
bool "Define U-Boot binaries locations in NAND"
|
||||
help
|
||||
Enable CONFIG_SYS_NAND_U_BOOT_OFFS though Kconfig.
|
||||
This option should not be enabled when compiling U-Boot for boards
|
||||
defining CONFIG_SYS_NAND_U_BOOT_OFFS in their include/configs/<board>.h
|
||||
file.
|
||||
Enable CONFIG_SYS_NAND_U_BOOT_OFFS though Kconfig.
|
||||
This option should not be enabled when compiling U-Boot for boards
|
||||
defining CONFIG_SYS_NAND_U_BOOT_OFFS in their include/configs/<board>.h
|
||||
file.
|
||||
|
||||
config SYS_NAND_U_BOOT_OFFS
|
||||
hex "Location in NAND to read U-Boot from"
|
||||
default 0x800000 if NAND_SUNXI
|
||||
depends on SYS_NAND_U_BOOT_LOCATIONS
|
||||
help
|
||||
Set the offset from the start of the nand where u-boot should be
|
||||
loaded from.
|
||||
Set the offset from the start of the nand where u-boot should be
|
||||
loaded from.
|
||||
|
||||
config SYS_NAND_U_BOOT_OFFS_REDUND
|
||||
hex "Location in NAND to read U-Boot from"
|
||||
default SYS_NAND_U_BOOT_OFFS
|
||||
depends on SYS_NAND_U_BOOT_LOCATIONS
|
||||
help
|
||||
Set the offset from the start of the nand where the redundant u-boot
|
||||
should be loaded from.
|
||||
Set the offset from the start of the nand where the redundant u-boot
|
||||
should be loaded from.
|
||||
|
||||
config SPL_NAND_AM33XX_BCH
|
||||
bool "Enables SPL-NAND driver which supports ELM based"
|
||||
depends on SPL_NAND_SUPPORT && NAND_OMAP_GPMC && !OMAP34XX
|
||||
default y
|
||||
help
|
||||
help
|
||||
Hardware ECC correction. This is useful for platforms which have ELM
|
||||
hardware engine and use NAND boot mode.
|
||||
Some legacy platforms like OMAP3xx do not have in-built ELM h/w engine,
|
||||
so those platforms should use CONFIG_SPL_NAND_SIMPLE for enabling
|
||||
SPL-NAND driver with software ECC correction support.
|
||||
SPL-NAND driver with software ECC correction support.
|
||||
|
||||
config SPL_NAND_DENALI
|
||||
bool "Support Denali NAND controller for SPL"
|
||||
|
@ -819,6 +819,6 @@ config SYS_NAND_HW_ECC_OOBFIRST
|
|||
bool "In SPL, read the OOB first and then the data from NAND"
|
||||
depends on SPL_NAND_SIMPLE
|
||||
|
||||
endif
|
||||
endif # if SPL
|
||||
|
||||
endif # if NAND
|
||||
endif # if MTD_RAW_NAND
|
||||
|
|
Loading…
Reference in New Issue
Block a user