Convert CONFIG_CONS_INDEX et al to Kconfig

This converts the following to Kconfig:
   CONFIG_CONS_INDEX
   CONFIG_DEBUG_UART_CLOCK
   CONFIG_FSL_TZPC_BP147
   CONFIG_GENERIC_ATMEL_MCI
   CONFIG_IDENT_STRING
   CONFIG_LIBATA
   CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE
   CONFIG_LPC32XX_GPIO
   CONFIG_MP
   CONFIG_MPC8XXX_GPIO
   CONFIG_MTD_PARTITIONS
   CONFIG_MVGBE
   CONFIG_MXC_GPIO
   CONFIG_NR_DRAM_BANKS
   CONFIG_OF_BOARD_SETUP
   CONFIG_OF_STDOUT_VIA_ALIAS
   CONFIG_OF_SYSTEM_SETUP
   CONFIG_PREBOOT
   CONFIG_ROCKCHIP_SERIAL
   CONFIG_RTC_ENABLE_32KHZ_OUTPUT
   CONFIG_RTC_MV
   CONFIG_SCSI_AHCI
   CONFIG_SF_DEFAULT_BUS
   CONFIG_SF_DEFAULT_CS
   CONFIG_SF_DEFAULT_SPEED
   CONFIG_SOFT_SPI
   CONFIG_SPI_FLASH_EON
   CONFIG_SPI_FLASH_MACRONIX
   CONFIG_SPI_FLASH_MTD
   CONFIG_SPI_FLASH_SPANSION
   CONFIG_SPI_FLASH_SST
   CONFIG_SPI_FLASH_STMICRO
   CONFIG_SUPPORT_RAW_INITRD
   CONFIG_SYS_ARCH_TIMER
   CONFIG_SYS_BOARD
   CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
   CONFIG_SYS_DCACHE_OFF
   CONFIG_SYS_FDT_SAVE_ADDRESS
   CONFIG_SYS_FLASH_CFI
   CONFIG_SYS_FSL_ERRATUM_ESDHC135
   CONFIG_SYS_HAS_SERDES
   CONFIG_SYS_L2CACHE_OFF
   CONFIG_SYS_LITTLE_ENDIAN
   CONFIG_SYS_LOAD_ADDR
   CONFIG_SYS_MMCSD_FS_BOOT_PARTITION
   CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
   CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
   CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
   CONFIG_SYS_NS16550
   CONFIG_SYS_PLLFIN
   CONFIG_SYS_SPI_U_BOOT_OFFS
   CONFIG_TIMER_SYS_TICK_CH
   CONFIG_USB_EHCI_FSL
   CONFIG_U_QE
   CONFIG_VERSION_VARIABLE

Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini 2021-12-11 14:55:51 -05:00
parent 66e0e2b1cd
commit f76750d111
410 changed files with 475 additions and 379 deletions

29
README
View File

@ -565,11 +565,6 @@ The following options need to be configured:
boards with QUICC Engines require OF_QE to set UCC MAC
addresses
CONFIG_OF_BOARD_SETUP
Board code has addition modification that it wants to make
to the flat device tree before handing it off to the kernel
CONFIG_OF_SYSTEM_SETUP
Other code has addition modification that it wants to make
@ -596,9 +591,6 @@ The following options need to be configured:
Note: If a "bootargs" environment is defined, it will override
the defaults discussed just above.
- Cache Configuration:
CONFIG_SYS_L2CACHE_OFF- Do not enable L2 cache in U-Boot
- Cache Configuration for ARM:
CONFIG_SYS_L2_PL310 - Enable support for ARM PL310 L2 cache
controller
@ -1520,16 +1512,6 @@ The following options need to be configured:
SPI EEPROM, also an instance works with Crystal A/D and
D/As on the SACSng board)
CONFIG_SOFT_SPI
Enables a software (bit-bang) SPI driver rather than
using hardware support. This is a general purpose
driver that only requires three general I/O port pins
(two outputs, one input) to function. If this is
defined, the board configuration must define several
SPI configuration items (port pins to use, etc). For
an example, see include/configs/sacsng.h.
CONFIG_SYS_SPI_MXC_WAIT
Timeout for waiting until spi transfer completed.
default: (CONFIG_SYS_HZ/100) /* 10 ms */
@ -1595,13 +1577,6 @@ The following options need to be configured:
Time to wait after FPGA configuration. The default is
200 ms.
- Configuration Management:
CONFIG_IDENT_STRING
If defined, this string will be added to the U-Boot
version information (U_BOOT_VERSION)
- Vendor Parameter Protection:
U-Boot considers the values of the environment
@ -1922,10 +1897,6 @@ The following options need to be configured:
CONFIG_SPL_INIT_MINIMAL
Arch init code should be built for a very small image
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
Partition on the MMC to load U-Boot from when the MMC is being
used in raw mode
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR
Sector to load kernel uImage from when MMC is being
used in raw mode (for Falcon mode)

View File

@ -41,6 +41,7 @@ config ARCH_LS1028A
select SYS_FSL_SEC_COMPAT_5
select SYS_FSL_SEC_LE
select FSL_TZASC_1
select FSL_TZPC_BP147
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_I2C_MXC
@ -241,6 +242,7 @@ config ARCH_LX2162A
select FSL_DDR_INTERACTIVE
select FSL_LAYERSCAPE
select FSL_LSCH3
select FSL_TZPC_BP147
select GICV3
select NXP_LSCH3_2
select SYS_HAS_SERDES
@ -277,6 +279,7 @@ config ARCH_LX2160A
select FSL_DDR_INTERACTIVE
select FSL_LAYERSCAPE
select FSL_LSCH3
select FSL_TZPC_BP147
select GICV3
select HAS_FSL_XHCI_USB if USB_HOST
select NXP_LSCH3_2

View File

@ -234,7 +234,6 @@
#elif defined(CONFIG_ARCH_LS1028A)
#define CONFIG_SYS_FSL_NUM_CC_PLLS 3
#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1 }
#define CONFIG_FSL_TZPC_BP147
#define CONFIG_FSL_TZASC_400
/* TZ Protection Controller Definitions */

View File

@ -15,4 +15,7 @@ config SYS_MALLOC_LEN
config SYS_MALLOC_F_LEN
default 0x4000
config LNX_KRNL_IMG_TEXT_OFFSET_BASE
default SYS_TEXT_BASE
endif

View File

@ -2,6 +2,7 @@ if ARCH_IMXRT
config IMXRT
bool
select SYS_FSL_ERRATUM_ESDHC135
config IMXRT1020
bool

View File

@ -33,6 +33,12 @@ config TARGET_NANOPI2
endchoice
config SYS_PLLFIN
int
config TIMER_SYS_TICK_CH
int
config SYS_BOARD
default "nanopi2"
@ -45,13 +51,13 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "s5p4418_nanopi2"
endmenu
config SYS_PLLFIN
int
default 24000000
config TIMER_SYS_TICK_CH
int
default 0
endmenu
source "board/friendlyarm/Kconfig"

View File

@ -354,6 +354,7 @@ config ARCH_P1010
bool
select FSL_LAW
select SYS_CACHE_SHIFT_5
select SYS_HAS_SERDES
select SYS_FSL_ERRATUM_A004477
select SYS_FSL_ERRATUM_A004508
select SYS_FSL_ERRATUM_A005125
@ -1001,6 +1002,9 @@ config SYS_FSL_ERRATUM_SRIO_A004034
config SYS_FSL_ERRATUM_USB14
bool
config SYS_HAS_SERDES
bool
config SYS_P4080_ERRATUM_CPU22
bool

View File

@ -5,7 +5,6 @@ F: board/siemens/capricorn/
F: include/configs/capricorn-common.h
F: include/configs/deneb.h
F: include/configs/giedi.h
F: include/configs/siemens-ccp-common.h
F: include/configs/siemens-env-common.h
F: configs/deneb_defconfig
F: configs/giedi_defconfig

View File

@ -9,4 +9,7 @@ config SYS_VENDOR
config SYS_CONFIG_NAME
default "xenguest_arm64"
config LNX_KRNL_IMG_TEXT_OFFSET_BASE
default SYS_LOAD_ADDR
endif

View File

@ -198,3 +198,4 @@ CONFIG_TSEC_ENET=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_FSL=y

View File

@ -96,4 +96,5 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_ADDR_MAP=y

View File

@ -76,4 +76,5 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_ADDR_MAP=y

View File

@ -88,4 +88,5 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_ADDR_MAP=y

View File

@ -90,4 +90,5 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_ADDR_MAP=y

View File

@ -95,3 +95,4 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y

View File

@ -75,3 +75,4 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y

View File

@ -87,3 +87,4 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y

View File

@ -89,3 +89,4 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y

View File

@ -99,4 +99,5 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_ADDR_MAP=y

View File

@ -78,4 +78,5 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_ADDR_MAP=y

View File

@ -90,4 +90,5 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_ADDR_MAP=y

View File

@ -92,4 +92,5 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_ADDR_MAP=y

View File

@ -98,3 +98,4 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y

View File

@ -77,3 +77,4 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y

View File

@ -89,3 +89,4 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y

View File

@ -91,3 +91,4 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y

View File

@ -110,5 +110,6 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y

View File

@ -99,5 +99,6 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y

View File

@ -101,5 +101,6 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y

View File

@ -88,5 +88,6 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y

View File

@ -109,4 +109,5 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y

View File

@ -98,4 +98,5 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y

View File

@ -100,4 +100,5 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y

View File

@ -87,4 +87,5 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y

View File

@ -113,4 +113,5 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y

View File

@ -102,4 +102,5 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y

View File

@ -104,4 +104,5 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y

View File

@ -91,4 +91,5 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y

View File

@ -115,5 +115,6 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y

View File

@ -104,5 +104,6 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y

View File

@ -106,5 +106,6 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y

View File

@ -93,5 +93,6 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y

View File

@ -114,4 +114,5 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y

View File

@ -103,3 +103,4 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y

View File

@ -105,4 +105,5 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y

View File

@ -92,4 +92,5 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y

View File

@ -82,6 +82,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -78,6 +78,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -79,6 +79,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -74,6 +74,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -84,6 +84,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -80,6 +80,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -81,6 +81,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -76,6 +76,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -79,6 +79,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -80,6 +80,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -75,6 +75,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -85,6 +85,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -80,6 +80,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -81,6 +81,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -76,6 +76,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -44,16 +44,17 @@ CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_PHYLIB=y
CONFIG_MV88E61XX_SWITCH=y
CONFIG_MV88E61XX_CPU_PORT=10
CONFIG_MV88E61XX_PHY_PORTS=0x003
CONFIG_MV88E61XX_FIXED_PORTS=0x300
CONFIG_PHY_FIXED=y
CONFIG_DM_ETH=y
CONFIG_MVGBE=y
CONFIG_MII=y
CONFIG_DM_RTC=y
CONFIG_RTC_MV=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_KIRKWOOD_SPI=y

View File

@ -48,14 +48,15 @@ CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_PHYLIB=y
CONFIG_MV88E61XX_SWITCH=y
CONFIG_MV88E61XX_CPU_PORT=10
CONFIG_MV88E61XX_PHY_PORTS=0x003
CONFIG_MV88E61XX_FIXED_PORTS=0x300
CONFIG_PHY_FIXED=y
CONFIG_DM_ETH=y
CONFIG_MVGBE=y
CONFIG_MII=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_KIRKWOOD_SPI=y

View File

@ -104,6 +104,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -101,6 +101,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -103,6 +103,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -86,6 +86,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -92,6 +92,7 @@ CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x280000
CONFIG_MII=y
CONFIG_PCIE_FSL=y
CONFIG_U_QE=y
CONFIG_SYS_QE_FW_ADDR=0x380000
CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_DM_RTC=y
@ -100,6 +101,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -88,6 +88,7 @@ CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x10400
CONFIG_MII=y
CONFIG_PCIE_FSL=y
CONFIG_U_QE=y
CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_DM_RTC=y
CONFIG_SYS_NS16550=y
@ -95,6 +96,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -90,6 +90,7 @@ CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x110000
CONFIG_MII=y
CONFIG_PCIE_FSL=y
CONFIG_U_QE=y
CONFIG_SYS_QE_FW_ADDR=0x130000
CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_DM_RTC=y
@ -98,6 +99,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -73,6 +73,7 @@ CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0xEFF00000
CONFIG_MII=y
CONFIG_PCIE_FSL=y
CONFIG_U_QE=y
CONFIG_SYS_QE_FW_ADDR=0xEFF10000
CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_DM_RTC=y
@ -81,6 +82,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -98,6 +98,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -94,6 +94,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -78,6 +78,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -96,6 +96,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -71,6 +71,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -79,6 +79,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -106,6 +106,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -102,6 +102,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -104,6 +104,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -85,6 +85,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -108,6 +108,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -104,6 +104,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -106,6 +106,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -88,6 +88,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -88,6 +88,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -73,6 +73,7 @@ CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

View File

@ -9,6 +9,8 @@ CONFIG_NR_DRAM_BANKS=8
CONFIG_DEFAULT_DEVICE_TREE="exynos78x0-axy17lte"
CONFIG_SYS_LOAD_ADDR=0x40001000
CONFIG_FIT=y
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="echo Read pressed buttons status;KEY_VOLUMEUP=gpa20;KEY_HOME=gpa17;KEY_VOLUMEDOWN=gpa21;KEY_POWER=gpa00;PRESSED=0;RELEASED=1;if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; else setenv VOLUME_UP $RELEASED; fi;if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; else setenv VOLUME_DOWN $RELEASED; fi;if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GPIO=y

View File

@ -9,6 +9,8 @@ CONFIG_NR_DRAM_BANKS=12
CONFIG_DEFAULT_DEVICE_TREE="exynos78x0-axy17lte"
CONFIG_SYS_LOAD_ADDR=0x40001000
CONFIG_FIT=y
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="echo Read pressed buttons status;KEY_VOLUMEUP=gpa20;KEY_HOME=gpa17;KEY_VOLUMEDOWN=gpa21;KEY_POWER=gpa00;PRESSED=0;RELEASED=1;if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; else setenv VOLUME_UP $RELEASED; fi;if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; else setenv VOLUME_DOWN $RELEASED; fi;if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GPIO=y

View File

@ -9,6 +9,8 @@ CONFIG_NR_DRAM_BANKS=12
CONFIG_DEFAULT_DEVICE_TREE="exynos78x0-axy17lte"
CONFIG_SYS_LOAD_ADDR=0x40001000
CONFIG_FIT=y
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="echo Read pressed buttons status;KEY_VOLUMEUP=gpa20;KEY_HOME=gpa17;KEY_VOLUMEDOWN=gpa21;KEY_POWER=gpa00;PRESSED=0;RELEASED=1;if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; else setenv VOLUME_UP $RELEASED; fi;if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; else setenv VOLUME_DOWN $RELEASED; fi;if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GPIO=y

View File

@ -1,4 +1,5 @@
CONFIG_ARM=y
CONFIG_SYS_L2CACHE_OFF=y
CONFIG_ARCH_TEGRA=y
CONFIG_SYS_TEXT_BASE=0x80110000
CONFIG_SYS_MALLOC_F_LEN=0x2000

View File

@ -27,6 +27,7 @@ CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_BOOTDELAY=1
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_EARLY_INIT_F=y

View File

@ -1,4 +1,5 @@
CONFIG_ARM=y
CONFIG_SYS_L2CACHE_OFF=y
CONFIG_ARCH_TEGRA=y
CONFIG_SYS_TEXT_BASE=0x80110000
CONFIG_SYS_MALLOC_F_LEN=0x2000

View File

@ -35,4 +35,5 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_BCMSTB=y
CONFIG_MTD=y
CONFIG_SYS_NS16550=y
# CONFIG_EFI_LOADER is not set

View File

@ -37,6 +37,9 @@ CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_BCMSTB=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_BCMSTB_SPI=y

View File

@ -1,4 +1,5 @@
CONFIG_ARM=y
CONFIG_SYS_L2CACHE_OFF=y
CONFIG_ARCH_TEGRA=y
CONFIG_SYS_TEXT_BASE=0x80110000
CONFIG_SYS_MALLOC_LEN=0x2500000

View File

@ -3,6 +3,7 @@ CONFIG_SYS_VENDOR="bitmain"
CONFIG_SYS_BOARD="antminer_s9"
CONFIG_SYS_CONFIG_NAME="bitmain_antminer_s9"
CONFIG_SPL_SYS_DCACHE_OFF=y
CONFIG_SYS_L2CACHE_OFF=y
CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0x4000000
CONFIG_ENV_OFFSET=0x300000

View File

@ -1,4 +1,5 @@
CONFIG_ARM=y
CONFIG_SYS_L2CACHE_OFF=y
CONFIG_ARCH_TEGRA=y
CONFIG_SYS_TEXT_BASE=0x80110000
CONFIG_NR_DRAM_BANKS=2

View File

@ -1,4 +1,5 @@
CONFIG_ARM=y
CONFIG_SYS_L2CACHE_OFF=y
CONFIG_ARCH_TEGRA=y
CONFIG_SYS_TEXT_BASE=0x80110000
CONFIG_SYS_MALLOC_LEN=0x2500000

View File

@ -21,6 +21,7 @@ CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi"
@ -28,6 +29,8 @@ CONFIG_LOG=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800
CONFIG_SYS_MMCSD_FS_BOOT_PARTITION=0
CONFIG_SPL_POWER_DOMAIN=y
CONFIG_SPL_WATCHDOG=y

Some files were not shown because too many files have changed in this diff Show More