Embedded_Projects/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

sunxi: H6: Enable USB for existing boards

Browse Source 
So far USB was not enabled for the Allwinner H6 boards, as the PHY
driver was not ready and the clock gates were missing. Since this is now
fixed, let's add the PHY and the OHCI/EHCI drivers to the build, for
all existing H6 boards.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> # Pine-H64
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
This commit is contained in:
Andre Przywara 2019-06-23 15:09:50 +01:00 committed by Jagan Teki
parent 35fa673e0e
commit f96238e253
5 changed files with 10 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arm/mach-sunxi/Kconfig
View File

@ -300,6 +300,7 @@ config MACH_SUN50I_H6
select ARM64
select SUPPORT_SPL
select FIT
select PHY_SUN4I_USB
select SPL_LOAD_FIT
select DRAM_SUN50I_H6

2
configs/beelink_gs1_defconfig
View File

@ -14,3 +14,5 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-beelink-gs1"
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y

2
configs/orangepi_lite2_defconfig
View File

@ -11,3 +11,5 @@ CONFIG_MMC0_CD_PIN="PF6"
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-lite2"
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y

2
configs/orangepi_one_plus_defconfig
View File

@ -11,3 +11,5 @@ CONFIG_MMC0_CD_PIN="PF6"
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-one-plus"
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y

3
configs/pine_h64_defconfig
View File

@ -12,3 +12,6 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-pine-h64"
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB3_VBUS_PIN="PL5"