In part_get_info_by_name() the inability to get some partition info
shouldn't be a reason for dropping out of the loop. That might happen
e.g. if the partition is hidden or unused. An example of such case are
Samsung devices, where they use the "unused" GUID type
(00000000-0000-0000-0000-000000000000) to indicate that the partition
should be hidden from the OS. Such partitions might not be seen in
"part list" output, which creates "gaps" in numbering in between of the
visible partitions:
Part Start LBA End LBA Name
1 0x00000400 0x0000a3ff "efs"
5 0x00026420 0x00026c1f "dtbo"
12 0x0003f390 0x0074738f "super"
In that case, the loop in part_get_info_by_name() would break after
partition #1, so any attempt to obtain "dtbo" or "super" partition will
fail. Fix that by continuing to iterate over the remaining partitions to
make sure none of the visible ones is missed. That makes "part" command
(e.g. "part start", "part size") able to work with such tables.
Fixes: 87b8530fe2 ("disk: part: implement generic function part_get_info_by_name()")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
A recent refactoring in image-host.c messed up the return values of
the function that reads the encryptiong keys. This patch fixes this
and also makes sure that error output goes to stderr instead of to
stdout.
Signed-off-by: Hugo Cornelis <hugo.cornelis@essensium.com>
Mentions that command line option --signal is needed to make use of this
configuration option.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Instead of checking a configuration setting in booti_start() adjust the
sandbox implementation of booti_setup().
Write a console message when trying to run the booti command on the sandbox
indicating that it is not supported.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
We should check the return value of fcntl().
Addresses-Coverity-ID: 131108 ("Unchecked return value from library")
Addresses-Coverity-ID: 131109 ("Unchecked return value from library")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Those keyboards do not return the current device state. Polling will
timeout unless there are key presses. This is not a problem during
operation but the initial device state query during probing will fail.
Skip this step in usb_kbd_probe_dev() to make these devices useable.
Not all Apple keyboards behave like this. A keyboard with USB
vendor/product ID 05ac:0221 is reported to work with the current code.
Unfortunately some Keychron keyboards "re-use" Apple's vendor ID and
show the same behavior (Keychron C2, 05ac:024f for example).
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Add the environment variable "usb_ignorelist" to prevent USB devices
listed in it from being bound to drivers. This allows to ignore devices
which are undesirable or trigger bugs in u-boot's USB stack.
Devices emulating keyboards are one example of undesirable devices as
u-boot currently supports only a single USB keyboard device. Most
commonly, people run into this with Yubikeys, so let's ignore those in
the default environment.
Based on previous USB keyboard specific patches for the same purpose.
Link: https://lore.kernel.org/u-boot/7ab604fb-0fec-4f5e-8708-7a3a7e2cb568@denx.de/
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Janne Grunau <j@jannau.net>
Select environment location based on the device we boot from.
Also, introduce a "boot" variable that represents the current boot
device and can be used by scripts.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Introduce get_boot_device() to obtain the booting device. Make it also
available for non SPL builds so u-boot can also know the device it is
booting from.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Relocate booindex to OCRAM region after it gets opened by TIFS so
the main domain bootloaders can have access to this data.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Add support for signing of TIFSSTUB images for HSSE, HSFS and GP devices
and include them in tispl.bin and tispl.bin_unsigned.
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Add support for detecting and processing TIFSSTUB images for HS, HSFS
and GP devices.
TIFSSTUB image for related device type will be loaded, rest TIFSSTUB
images will be discarded.
Example, for GP device, tifsstub-gp will be loaded, tifsstub-hs and
tifsstub-fs will be discarded.
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Move verdin-am62 to OF_UPSTREAM:
- handle the fact that dtbs now have a 'ti/' prefix
- imply OF_UPSTREAM
- remove redundant files from arch/arm/dts leaving only the
*-u-boot.dtsi files
- update MAINTAINERS file
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
This extra binding is non-standard and now unneeded as we bind the
sysreset driver automatically. This matches what is done in Linux
and allows us to more closely match the DTBs. Remove the binding
and all users.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Tested-by: Jonathan Humphreys <j-humphreys@ti.com>
The sysreset TI-SCI API is available with TI-SCI always, there is no need
for a DT node to describe the availability of this. If the sysreset driver
is available then bind it during ti-sci probe.
Remove the unneeded device tree matching.
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
The device name is a concatenation of the device node name of the cpsw
device and of the device node name of the port. In my case that is
ethernet@8000000
port@1
First the buffer is really too small, but more importantly, there is no
boundary check. Use snprintf() and increase the buffer size.
Fixes: 38922b1f4a ("net: ti: am65-cpsw: Add support for multi port independent MAC mode")
Signed-off-by: Michael Walle <mwalle@kernel.org>
During the boot, the EFI loader maps the memory from ram_top to ram_end
as EFI_BOOT_SERVICES_DATA. When LMB does boot_fdt_add_mem_rsv_regions()
to OPTEE, TFA, R5, and M4F DMA/memory "no-map" for the kernel it produces
the following error message:
ERROR: reserving fdt memory region failed (addr=9cb00000 size=100000 flags=4)
ERROR: reserving fdt memory region failed (addr=9cc00000 size=e00000 flags=4)
ERROR: reserving fdt memory region failed (addr=9da00000 size=100000 flags=4)
ERROR: reserving fdt memory region failed (addr=9db00000 size=c00000 flags=4)
ERROR: reserving fdt memory region failed (addr=9e780000 size=80000 flags=4)
ERROR: reserving fdt memory region failed (addr=9e800000 size=1800000 flags=4)
To avoid this, don't flag with EFI_BOOT_SERVICES_DATA the memory from
ram_top to ram_end by the EFI loader.
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
With the current config for tha SK-AM62, fdtfile isn't set in the U-Boot
environment. When using bootflow to boot from a block device, where the
extlinux.conf file specifies `fdtdir`, a fallback device tree is being
constructed from the `soc` (`k3`) and `board` (`am62x`) environment
variables, resulting in u-Boot trying to retrieve
`/dtbs/6.8.1+/k3-am62x.dtb`. This file doesn't exist.
The environment variables `default_device_tree` and
`default_device_tree_arch` are set in the config, the `findfdt` script
can be called to construct `fdtfile` from the environment variables set
by these config options, however this script currently isn't being run.
Calling this script results in the correct device tree being retrieved:
Retrieving file: /dtbs/6.8.1+/ti/k3-am625-sk.dtb
Many boards are calling this script as part of their boot command. The
am62x currently isn't. Rectify this so that booting works correctly.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
When there is a lint error the user gets the following cryptic message:
binman: Node '/path/to/some/node': Yamllint error: 18: comments
This isn't very helpful. Improve the message to tell the user that the
number is actually a line number and also tell the user in which file
they have to look.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
The maximum frequency of the A53 CPU on the AM62 depends on the speed
grade of the SoC. However, this value is hardcoded in the DT for all
AM62 variants, potentially causing specifications to be exceeded. Moreover,
setting a common lower frequency for all variants increases boot time.
To prevent these issues, modify the DT at runtime from the R5 core to
adjust the A53 CPU frequency based on its speed grade.
Suggested-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
AM62 SoC has multiple speed grades. Add function to return max A53 CPU
frequency based on grade. Fastest grade's max frequency also depends on
PMIC voltage, to simplify implementation use the smaller value.
Suggested-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Move the variable below comment which explains what the variable means.
Update the comment. No functional change.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The lmb_alloc_base() returns phys_addr_t , map_sysmem() accepts
phys_addr_t as first parameter. Declare 'addr' as phys_addr_t and
get rid of the casts.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reduce tmp variable use and remove unnecessary type cast in
env_get_bootm_mapsize(). This aligns the env variable parsing
with env_get_bootm_low(). No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Change type of 'tmp' variable from phys_size_t to phys_addr_t and
rename it to 'low' to better describe what the variable represents,
which is either the bootm_low address from environment or start of
DRAM address.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reduce tmp variable use and remove unnecessary type cast in
env_get_bootm_size(). This aligns the env variable parsing
with env_get_bootm_low(). No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Change type of ulong env_get_bootm_low() to phys_addr_t env_get_bootm_low().
The PPC/LS systems already treat env_get_bootm_low() result as phys_addr_t,
while the function itself still returns ulong. This is potentially dangerous
on 64bit systems, where ulong might not be large enough to hold the content
of "bootm_low" environment variable. Fix it by using phys_addr_t, similar to
what env_get_bootm_size() does, which returns phys_size_t .
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Simon Glass <sjg@chromium.org> says:
This little series reprises the EFI-video fix, fixes a USB problem and
enables a boot script for coreboot.
It also moves to truetype fonts for coreboot and qemu-x86, since the
menus look much better and there are no strong size constraints.
With these changes it is possible to boot a Linux distro automatically
with U-Boot on x86, including when U-Boot is the second-stage
bootloader.
Enable this feature to provide a larger font choice and more attractive
menus. Expand the ROM for x86_64 to 2MB to make space for the font.
Signed-off-by: Simon Glass <sjg@chromium.org>
This is needed to support Truetype fonts. In any case, the compiler
expects SSE to be available in 64-bit mode. Provide an option to enable
SSE so that hardware floating-point arithmetic works.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Suggested-by: Bin Meng <bmeng.cn@gmail.com>
Saving and restoring entries is used for expo and for the command line,
which we don't use in SPL. Drop these methods.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
The ANSI codes are not correctly handled at present, in that the
requested X position is added to the current one.
Correct this and also call vidconsole_entry_start() to start a new text
line.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Provide the user with a list of available boot options. Selecting one
causes it to be booted. Pressing <ESC> causes U-Boot to return to the
command-line prompt.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass <sjg@chromium.org> says:
This series is the culmanation of the current line of refactoring
series. It adjusts pxe to call the booting functionality directly
rather than going through the command-line interface.
With this is is possible to boot using the extlinux bootmeth without
the command line enabled.
It also updates fastboot to do a similar thing.
Use zboot_run() to boot rather than the command line. This allows
extlinux to be used (on x86) without CMDLINE being enabled.
Collect any error but do not return it, to match the existing code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use bootm_run() and booti_run() to boot rather than the command line.
This allows extlinux to be used without CMDLINE being enabled.
Collect any error but do not return it, to match the existing code.
Signed-off-by: Simon Glass <sjg@chromium.org>
This code undertakes a separate task from the main logic of
label_run_boot() so move it into its own function.
Signed-off-by: Simon Glass <sjg@chromium.org>
The bootm_argv[3] expression is used in many places. It is the FDT
address, so use that name throughout.
Assign it to bootm_argv[3] only at the end, when all the conditions are
resolved.
Signed-off-by: Simon Glass <sjg@chromium.org>
This function is far too long and complicated. Split out the part
which actually calls the boot commands into a separate function.
Change a strncpy() to strlcpy() to keep checkpatch happy.
No functional change is intended.
Signed-off-by: Simon Glass <sjg@chromium.org>
The fastboot 'boot' command only supports running a U-Boot command if
CONFIG_CMDLINE is enabled. Mention this in the documentation.
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
It is possible to boot a kernel without CMDLINE being enabled. Update
the implementation to handle this, and drop the condition from the
FASTBOOT config.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
