u-boot/board/out4/o4-imx6ull-nano/Kconfig
Oleh Kravchenko 1180baec98 Add EV-iMX280-NANO-X-MB board
A simple prototyping board with one microSD port, one Ethernet port,
2 USB ports, I2C, SPI, GPIO, and UART interfaces.

Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Cc: Stefano Babic <sbabic@denx.de>
2021-06-09 13:32:49 +02:00

65 lines
1.3 KiB
Plaintext

if TARGET_O4_IMX6ULL_NANO
config SYS_BOARD
default "o4-imx6ull-nano"
config SYS_VENDOR
default "out4"
config SYS_CONFIG_NAME
default "o4-imx6ull-nano"
choice
prompt "Memory model"
default K4B4G1646D_BCMA
help
Memory type setup.
Please choose correct memory model here.
config K4B4G1646D_BCMA
bool "K4B4G1646D-BCMA 256Mx16 (512 MiB/chip)"
help
Samsung DDR3 SDRAM
K4B4G1646D-BCMA
config MT41K256M16HA_125E
bool "MT41K256M16HA-125:E 256Mx16 (512 MiB/chip)"
help
Micron DDR3L SDRAM
MT41K256M16HA-125:E
endchoice
choice
prompt "Mainboard model"
default O4_IMX_NANO
help
Mainboard setup.
Please choose correct main board model here.
config O4_IMX_NANO
bool "O4-iMX-NANO"
help
A baseboard for EV-iMX280-NANO module:
https://out4.ru/products/board/18-o4-imx-nano.html
config EV_IMX280_NANO_X_MB
bool "EV-IMX280-NANO-X-MB"
help
A simple baseboard for EV-iMX280-NANO module:
http://evodbg.net/products/mx28-eval-kits/14-ev-imx280-nano-x-mb.html
endchoice
config IMX_CONFIG
default "board/out4/o4-imx6ull-nano/K4B4G1646D-BCMA.cfg" if K4B4G1646D_BCMA
default "board/out4/o4-imx6ull-nano/MT41K256M16HA-125E.cfg" if MT41K256M16HA_125E
config DEFAULT_DEVICE_TREE
default "o4-imx-nano" if O4_IMX_NANO
default "ev-imx280-nano-x-mb" if EV_IMX280_NANO_X_MB
endif