u-boot/configs/UTOO_P66_defconfig
Andre Przywara 456093b4a3 sunxi: remove CONFIG_MMC?_CD_PIN
For legacy reasons we were defining the card detect GPIO for all sunxi
boards in each board's defconfig.
There is actually no need for a card-detect check in the SPL code (which
consequently has been removed already), and also in U-Boot proper we
have DM code to query the CD GPIO name from the device tree.

That means we don't have any user of that information left, so can
remove the definitions from the defconfigs.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
2023-01-21 01:32:23 +00:00

29 lines
827 B
Plaintext

CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-utoo-p66"
CONFIG_SPL=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=432
CONFIG_DRAM_EMR1=0
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_USB0_VBUS_PIN="PB04"
CONFIG_USB0_VBUS_DET="PG01"
CONFIG_USB0_ID_DET="PG2"
CONFIG_AXP_GPIO=y
# CONFIG_VIDEO_HDMI is not set
CONFIG_VIDEO_LCD_MODE="x:480,y:800,depth:18,pclk_khz:25000,le:2,ri:93,up:2,lo:93,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_POWER="PG4"
CONFIG_VIDEO_LCD_RESET="PG11"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_TL059WV5C0=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
CONFIG_SYS_I2C_SPEED=400000
# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
CONFIG_CONS_INDEX=2
CONFIG_USB_MUSB_HOST=y