u-boot/include/axp221.h
Samuel Holland 09cbd3858f gpio: axp/sunxi: Remove virtual VBUS detection GPIO
Now that this functionality is modeled using the device tree and
regulator uclass, the named GPIO is not referenced anywhere. Remove it.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-04-28 01:30:24 +01:00

68 lines
2.2 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
*
* X-Powers AXP221 Power Management IC driver
*/
/* Page 0 addresses */
#define AXP221_CHIP_ID 0x03
#define AXP221_OUTPUT_CTRL1 0x10
#define AXP221_OUTPUT_CTRL1_DCDC0_EN (1 << 0)
#define AXP221_OUTPUT_CTRL1_DCDC1_EN (1 << 1)
#define AXP221_OUTPUT_CTRL1_DCDC2_EN (1 << 2)
#define AXP221_OUTPUT_CTRL1_DCDC3_EN (1 << 3)
#define AXP221_OUTPUT_CTRL1_DCDC4_EN (1 << 4)
#define AXP221_OUTPUT_CTRL1_DCDC5_EN (1 << 5)
#define AXP221_OUTPUT_CTRL1_ALDO1_EN (1 << 6)
#define AXP221_OUTPUT_CTRL1_ALDO2_EN (1 << 7)
#define AXP221_OUTPUT_CTRL2 0x12
#define AXP221_OUTPUT_CTRL2_ELDO1_EN (1 << 0)
#define AXP221_OUTPUT_CTRL2_ELDO2_EN (1 << 1)
#define AXP221_OUTPUT_CTRL2_ELDO3_EN (1 << 2)
#define AXP221_OUTPUT_CTRL2_DLDO1_EN (1 << 3)
#define AXP221_OUTPUT_CTRL2_DLDO2_EN (1 << 4)
#define AXP221_OUTPUT_CTRL2_DLDO3_EN (1 << 5)
#define AXP221_OUTPUT_CTRL2_DLDO4_EN (1 << 6)
#define AXP221_OUTPUT_CTRL2_DCDC1SW_EN (1 << 7)
#define AXP221_OUTPUT_CTRL3 0x13
#define AXP221_OUTPUT_CTRL3_ALDO3_EN (1 << 7)
#define AXP221_DLDO1_CTRL 0x15
#define AXP221_DLDO2_CTRL 0x16
#define AXP221_DLDO3_CTRL 0x17
#define AXP221_DLDO4_CTRL 0x18
#define AXP221_ELDO1_CTRL 0x19
#define AXP221_ELDO2_CTRL 0x1a
#define AXP221_ELDO3_CTRL 0x1b
#define AXP221_DCDC1_CTRL 0x21
#define AXP221_DCDC2_CTRL 0x22
#define AXP221_DCDC3_CTRL 0x23
#define AXP221_DCDC4_CTRL 0x24
#define AXP221_DCDC5_CTRL 0x25
#define AXP221_ALDO1_CTRL 0x28
#define AXP221_ALDO2_CTRL 0x29
#define AXP221_ALDO3_CTRL 0x2a
#define AXP221_SHUTDOWN 0x32
#define AXP221_SHUTDOWN_POWEROFF (1 << 7)
#define AXP221_PAGE 0xff
/* Page 1 addresses */
#define AXP221_SID 0x20
/* For axp_gpio.c */
#ifdef CONFIG_AXP221_POWER
#define AXP_POWER_STATUS 0x00
#define AXP_POWER_STATUS_ALDO_IN BIT(0)
#define AXP_VBUS_IPSOUT 0x30
#define AXP_VBUS_IPSOUT_DRIVEBUS (1 << 2)
#define AXP_MISC_CTRL 0x8f
#define AXP_MISC_CTRL_N_VBUSEN_FUNC (1 << 4)
#define AXP_GPIO0_CTRL 0x90
#define AXP_GPIO1_CTRL 0x92
#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */
#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */
#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
#define AXP_GPIO_STATE 0x94
#define AXP_GPIO_STATE_OFFSET 0
#endif