u-boot/include/fis.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

142 lines
2.5 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2008 Freescale Semiconductor, Inc.
* Dave Liu <daveliu@freescale.com>
*/
#ifndef __FIS_H__
#define __FIS_H__
/*
* Register - Host to Device FIS
*/
typedef struct sata_fis_h2d {
u8 fis_type;
u8 pm_port_c;
u8 command;
u8 features;
u8 lba_low;
u8 lba_mid;
u8 lba_high;
u8 device;
u8 lba_low_exp;
u8 lba_mid_exp;
u8 lba_high_exp;
u8 features_exp;
u8 sector_count;
u8 sector_count_exp;
u8 res1;
u8 control;
u8 res2[4];
} __attribute__ ((packed)) sata_fis_h2d_t;
/*
* Register - Host to Device FIS for read/write FPDMA queued
*/
typedef struct sata_fis_h2d_ncq {
u8 fis_type;
u8 pm_port_c;
u8 command;
u8 sector_count_low;
u8 lba_low;
u8 lba_mid;
u8 lba_high;
u8 device;
u8 lba_low_exp;
u8 lba_mid_exp;
u8 lba_high_exp;
u8 sector_count_high;
u8 tag;
u8 res1;
u8 res2;
u8 control;
u8 res3[4];
} __attribute__ ((packed)) sata_fis_h2d_ncq_t;
/*
* Register - Device to Host FIS
*/
typedef struct sata_fis_d2h {
u8 fis_type;
u8 pm_port_i;
u8 status;
u8 error;
u8 lba_low;
u8 lba_mid;
u8 lba_high;
u8 device;
u8 lba_low_exp;
u8 lba_mid_exp;
u8 lba_high_exp;
u8 res1;
u8 sector_count;
u8 sector_count_exp;
u8 res2[2];
u8 res3[4];
} __attribute__ ((packed)) sata_fis_d2h_t;
/*
* DMA Setup - Device to Host or Host to Device FIS
*/
typedef struct sata_fis_dma_setup {
u8 fis_type;
u8 pm_port_dir_int_act;
u8 res1;
u8 res2;
u32 dma_buffer_id_low;
u32 dma_buffer_id_high;
u32 res3;
u32 dma_buffer_offset;
u32 dma_transfer_count;
u32 res4;
} __attribute__ ((packed)) sata_fis_dma_setup_t;
/*
* PIO Setup - Device to Host FIS
*/
typedef struct sata_fis_pio_setup {
u8 fis_type;
u8 pm_port_dir_int;
u8 status;
u8 error;
u8 lba_low;
u8 lba_mid;
u8 lba_high;
u8 res1;
u8 lba_low_exp;
u8 lba_mid_exp;
u8 lba_high_exp;
u8 res2;
u8 sector_count;
u8 sector_count_exp;
u8 res3;
u8 e_status;
u16 transfer_count;
u16 res4;
} __attribute__ ((packed)) sata_fis_pio_setup_t;
/*
* Data - Host to Device or Device to Host FIS
*/
typedef struct sata_fis_data {
u8 fis_type;
u8 pm_port;
u8 res1;
u8 res2;
u32 data[2048];
} __attribute__ ((packed)) sata_fis_data_t;
/* fis_type - SATA FIS type
*/
enum sata_fis_type {
SATA_FIS_TYPE_REGISTER_H2D = 0x27,
SATA_FIS_TYPE_REGISTER_D2H = 0x34,
SATA_FIS_TYPE_DMA_ACT_D2H = 0x39,
SATA_FIS_TYPE_DMA_SETUP_BI = 0x41,
SATA_FIS_TYPE_DATA_BI = 0x46,
SATA_FIS_TYPE_BIST_ACT_BI = 0x58,
SATA_FIS_TYPE_PIO_SETUP_D2H = 0x5F,
SATA_FIS_TYPE_SET_DEVICE_BITS_D2H = 0xA1,
};
#endif /* __FIS_H__ */