u-boot/include/power/pfuze3000_pmic.h
Trent Piepho 7da7ff5491 power: pmic: Let PFUZE3000 see all 256 registers
The PFUZE3000 uses registers addresses up to 0xff.

The DM pfuze100 driver supports both pfuze100 and pfuze3000.  Allow it
to use the device type to return the correct number of registers.

Also rename the too generic PMIC_NUM_OF_REGS enumeration value for
pfuze3000 to match the other "PFUZE3000_" prefixed enumerations and the
pfuze100 enumeration value PFUZE100_NUM_OF_REGS.

Cc: Peng Fan <Peng.Fan@freescale.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-06-27 09:47:46 +02:00

83 lines
1.9 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2015 Freescale Semiconductor, Inc
* Peng Fan <Peng.Fan@freescale.com>
*/
#ifndef __PFUZE3000_PMIC_H_
#define __PFUZE3000_PMIC_H_
/* PFUZE3000 registers */
enum {
PFUZE3000_DEVICEID = 0x00,
PFUZE3000_REVID = 0x03,
PFUZE3000_FABID = 0x04,
PFUZE3000_INTSTAT0 = 0x05,
PFUZE3000_INTMASK0 = 0x06,
PFUZE3000_INTSENSE0 = 0x07,
PFUZE3000_INTSTAT1 = 0x08,
PFUZE3000_INTMASK1 = 0x09,
PFUZE3000_INTSENSE1 = 0x0A,
PFUZE3000_INTSTAT3 = 0x0E,
PFUZE3000_INTMASK3 = 0x0F,
PFUZE3000_INTSENSE3 = 0x10,
PFUZE3000_INTSTAT4 = 0x11,
PFUZE3000_INTMASK4 = 0x12,
PFUZE3000_INTSENSE4 = 0x13,
PFUZE3000_COINCTL = 0x1A,
PFUZE3000_PWRCTL = 0x1B,
PFUZE3000_MEMA = 0x1C,
PFUZE3000_MEMB = 0x1D,
PFUZE3000_MEMC = 0x1E,
PFUZE3000_MEMD = 0x1F,
PFUZE3000_SW1AVOLT = 0x20,
PFUZE3000_SW1ASTBY = 0x21,
PFUZE3000_SW1AOFF = 0x22,
PFUZE3000_SW1AMODE = 0x23,
PFUZE3000_SW1ACONF = 0x24,
PFUZE3000_SW1BVOLT = 0x2E,
PFUZE3000_SW1BSTBY = 0x2F,
PFUZE3000_SW1BOFF = 0x30,
PFUZE3000_SW1BMODE = 0x31,
PFUZE3000_SW1BCONF = 0x32,
PFUZE3000_SW2VOLT = 0x35,
PFUZE3000_SW2STBY = 0x36,
PFUZE3000_SW2OFF = 0x37,
PFUZE3000_SW2MODE = 0x38,
PFUZE3000_SW2CONF = 0x39,
PFUZE3000_SW3VOLT = 0x3C,
PFUZE3000_SW3STBY = 0x3D,
PFUZE3000_SW3OFF = 0x3E,
PFUZE3000_SW3MODE = 0x3F,
PFUZE3000_SW3CONF = 0x40,
PFUZE3000_SWBSTCTL = 0x66,
PFUZE3000_LDOGCTL = 0x69,
PFUZE3000_VREFDDRCTL = 0x6A,
PFUZE3000_VSNVSCTL = 0x6B,
PFUZE3000_VLDO1CTL = 0x6C,
PFUZE3000_VLDO2CTL = 0x6D,
PFUZE3000_VCC_SDCTL = 0x6E,
PFUZE3000_V33CTL = 0x6F,
PFUZE3000_VLDO3CTL = 0x70,
PFUZE3000_VLD4CTL = 0x71,
PFUZE3000_NUM_OF_REGS = 0x100,
};
int power_pfuze3000_init(unsigned char bus);
/* Voltage Configuration */
#define PFUZE3000_SW1AB_SETP(x) ((x - 7000) / 250)
#define PFUZE3000_SW3_SETP(x) ((x - 9000) / 500)
#define PFUZE3000_VLDO_SETP(x) ((x - 8000) / 500)
#endif