u-boot/include/winbond_w83627.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

35 lines
1.1 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
*/
#ifndef _WINBOND_W83627_H_
#define _WINBOND_W83627_H_
/* I/O address of Winbond Super IO chip */
#define WINBOND_IO_PORT 0x2e
/* Logical device number */
#define W83627DHG_FDC 0 /* Floppy */
#define W83627DHG_PP 1 /* Parallel port */
#define W83627DHG_SP1 2 /* Com1 */
#define W83627DHG_SP2 3 /* Com2 */
#define W83627DHG_KBC 5 /* PS/2 keyboard & mouse */
#define W83627DHG_SPI 6 /* Serial peripheral interface */
#define W83627DHG_WDTO_PLED 8 /* WDTO#, PLED */
#define W83627DHG_ACPI 10 /* ACPI */
#define W83627DHG_HWM 11 /* Hardware monitor */
#define W83627DHG_PECI_SST 12 /* PECI, SST */
/**
* Configure the base I/O port of the specified serial device and enable the
* serial device.
*
* @dev: high 8 bits = super I/O port, low 8 bits = logical device number
* @iobase: processor I/O port address to assign to this serial device
* @irq: processor IRQ number to assign to this serial device
*/
void winbond_enable_serial(uint dev, uint iobase, uint irq);
#endif /* _WINBOND_W83627_H_ */