u-boot/net/mdio-mux-uclass.c
Marek Behún 1776a24bbb treewide: use dm_mdio_read/write/reset() wrappers
Use the new dm_mdio_read/write/reset() wrappers treewide, instead of
always getting and dereferencing MDIO operations structure pointer.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2022-04-10 08:44:12 +03:00

226 lines
5.6 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2019
* Alex Marginean, NXP
*/
#include <common.h>
#include <dm.h>
#include <log.h>
#include <miiphy.h>
#include <dm/device-internal.h>
#include <dm/uclass-internal.h>
#include <dm/lists.h>
#define MDIO_MUX_CHILD_DRV_NAME "mdio-mux-bus-drv"
/**
* struct mdio_mux_perdev_priv - Per-device class data for MDIO MUX DM
*
* @parent_mdio: Parent DM MDIO device, this is called for actual MDIO I/O after
* setting up the mux. Typically this is a real MDIO device,
* unless there are cascaded muxes.
* @selected: Current child bus selection. Defaults to -1
*/
struct mdio_mux_perdev_priv {
struct udevice *mdio_parent;
int selected;
};
/*
* This source file uses three types of devices, as follows:
* - mux is the hardware MDIO MUX which selects between the existing child MDIO
* buses, this is the device relevant for MDIO MUX class of drivers.
* - ch is a child MDIO bus, this is just a representation of a mux selection,
* not a real piece of hardware.
* - mdio_parent is the actual MDIO bus called to perform reads/writes after
* the MUX is configured. Typically this is a real MDIO device, unless there
* are cascaded muxes.
*/
/**
* struct mdio_mux_ch_data - Per-device data for child MDIOs
*
* @sel: Selection value used by the MDIO MUX to access this child MDIO bus
*/
struct mdio_mux_ch_data {
int sel;
};
static struct udevice *mmux_get_parent_mdio(struct udevice *mux)
{
struct mdio_mux_perdev_priv *pdata = dev_get_uclass_priv(mux);
return pdata->mdio_parent;
}
/* call driver select function before performing MDIO r/w */
static int mmux_change_sel(struct udevice *ch, bool sel)
{
struct udevice *mux = ch->parent;
struct mdio_mux_perdev_priv *priv = dev_get_uclass_priv(mux);
struct mdio_mux_ops *ops = mdio_mux_get_ops(mux);
struct mdio_mux_ch_data *ch_data = dev_get_parent_plat(ch);
int err = 0;
if (sel) {
err = ops->select(mux, priv->selected, ch_data->sel);
if (err)
return err;
priv->selected = ch_data->sel;
} else {
if (ops->deselect) {
ops->deselect(mux, ch_data->sel);
priv->selected = MDIO_MUX_SELECT_NONE;
}
}
return 0;
}
/* Read wrapper, sets up the mux before issuing a read on parent MDIO bus */
static int mmux_read(struct udevice *ch, int addr, int devad,
int reg)
{
struct udevice *mux = ch->parent;
struct udevice *parent_mdio = mmux_get_parent_mdio(mux);
int err;
err = mmux_change_sel(ch, true);
if (err)
return err;
err = dm_mdio_read(parent_mdio, addr, devad, reg);
mmux_change_sel(ch, false);
return err;
}
/* Write wrapper, sets up the mux before issuing a write on parent MDIO bus */
static int mmux_write(struct udevice *ch, int addr, int devad,
int reg, u16 val)
{
struct udevice *mux = ch->parent;
struct udevice *parent_mdio = mmux_get_parent_mdio(mux);
int err;
err = mmux_change_sel(ch, true);
if (err)
return err;
err = dm_mdio_write(parent_mdio, addr, devad, reg, val);
mmux_change_sel(ch, false);
return err;
}
/* Reset wrapper, sets up the mux before issuing a reset on parent MDIO bus */
static int mmux_reset(struct udevice *ch)
{
struct udevice *mux = ch->parent;
struct udevice *parent_mdio = mmux_get_parent_mdio(mux);
int err;
/* reset is optional, if it's not implemented just exit */
if (!mdio_get_ops(parent_mdio)->reset)
return 0;
err = mmux_change_sel(ch, true);
if (err)
return err;
err = dm_mdio_reset(parent_mdio);
mmux_change_sel(ch, false);
return err;
}
/* Picks up the mux selection value for each child */
static int dm_mdio_mux_child_post_bind(struct udevice *ch)
{
struct mdio_mux_ch_data *ch_data = dev_get_parent_plat(ch);
ch_data->sel = dev_read_u32_default(ch, "reg", MDIO_MUX_SELECT_NONE);
if (ch_data->sel == MDIO_MUX_SELECT_NONE)
return -EINVAL;
return 0;
}
/* Explicitly bind child MDIOs after binding the mux */
static int dm_mdio_mux_post_bind(struct udevice *mux)
{
ofnode ch_node;
int err, first_err = 0;
if (!dev_has_ofnode(mux)) {
debug("%s: no mux node found, no child MDIO busses set up\n",
__func__);
return 0;
}
/*
* we're going by Linux bindings so the child nodes do not have
* compatible strings. We're going through them here and binding to
* them.
*/
dev_for_each_subnode(ch_node, mux) {
struct udevice *ch_dev;
const char *ch_name;
ch_name = ofnode_get_name(ch_node);
err = device_bind_driver_to_node(mux, MDIO_MUX_CHILD_DRV_NAME,
ch_name, ch_node, &ch_dev);
/* try to bind all, but keep 1st error */
if (err && !first_err)
first_err = err;
}
return first_err;
}
/* Get a reference to the parent MDIO bus, it should be bound by now */
static int dm_mdio_mux_post_probe(struct udevice *mux)
{
struct mdio_mux_perdev_priv *priv = dev_get_uclass_priv(mux);
int err;
priv->selected = MDIO_MUX_SELECT_NONE;
/* pick up mdio parent from device tree */
err = uclass_get_device_by_phandle(UCLASS_MDIO, mux, "mdio-parent-bus",
&priv->mdio_parent);
if (err) {
debug("%s: didn't find mdio-parent-bus\n", __func__);
return err;
}
return 0;
}
const struct mdio_ops mmux_child_mdio_ops = {
.read = mmux_read,
.write = mmux_write,
.reset = mmux_reset,
};
/* MDIO class driver used for MUX child MDIO buses */
U_BOOT_DRIVER(mdio_mux_child) = {
.name = MDIO_MUX_CHILD_DRV_NAME,
.id = UCLASS_MDIO,
.ops = &mmux_child_mdio_ops,
};
UCLASS_DRIVER(mdio_mux) = {
.id = UCLASS_MDIO_MUX,
.name = "mdio-mux",
.child_post_bind = dm_mdio_mux_child_post_bind,
.post_bind = dm_mdio_mux_post_bind,
.post_probe = dm_mdio_mux_post_probe,
.per_device_auto = sizeof(struct mdio_mux_perdev_priv),
.per_child_plat_auto = sizeof(struct mdio_mux_ch_data),
};