u-boot/tools/imx8m_image.sh
Ariel D'Alessandro 56ced77099 tools: imx8m_image: Support ddr3 firmware
Some boards use ddr3, not ddr4, so we need to check ddr3 firmware.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
2021-10-21 13:59:26 +02:00

54 lines
2.6 KiB
Bash
Executable File

#!/bin/sh
# SPDX-License-Identifier: GPL-2.0+
#
# script to check whether the file exists in imximage.cfg for i.MX8M
#
file=$1
post_process=$2
blobs=`awk '/^SIGNED_HDMI/ {print $2} /^LOADER/ {print $2} /^SECOND_LOADER/ {print $2} /^DDR_FW/ {print $2}' $file`
for f in $blobs; do
if [ $f = "spl/u-boot-spl-ddr.bin" ] || [ $f = "u-boot.itb" ]; then
continue
fi
if [ ! -f $f ]; then
echo "WARNING '$f' not found, resulting binary is not-functional" >&2
exit 1
fi
done
if [ $post_process = 1 ]; then
if [ -f lpddr4_pmu_train_1d_imem.bin ]; then
objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 lpddr4_pmu_train_1d_imem.bin lpddr4_pmu_train_1d_imem_pad.bin
objcopy -I binary -O binary --pad-to 0x4000 --gap-fill=0x0 lpddr4_pmu_train_1d_dmem.bin lpddr4_pmu_train_1d_dmem_pad.bin
objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 lpddr4_pmu_train_2d_imem.bin lpddr4_pmu_train_2d_imem_pad.bin
cat lpddr4_pmu_train_1d_imem_pad.bin lpddr4_pmu_train_1d_dmem_pad.bin > lpddr4_pmu_train_1d_fw.bin
cat lpddr4_pmu_train_2d_imem_pad.bin lpddr4_pmu_train_2d_dmem.bin > lpddr4_pmu_train_2d_fw.bin
dd if=spl/u-boot-spl.bin of=spl/u-boot-spl-pad.bin bs=4 conv=sync
cat spl/u-boot-spl-pad.bin lpddr4_pmu_train_1d_fw.bin lpddr4_pmu_train_2d_fw.bin > spl/u-boot-spl-ddr.bin
rm -f lpddr4_pmu_train_1d_fw.bin lpddr4_pmu_train_2d_fw.bin lpddr4_pmu_train_1d_imem_pad.bin lpddr4_pmu_train_1d_dmem_pad.bin lpddr4_pmu_train_2d_imem_pad.bin spl/u-boot-spl-pad.bin
fi
if [ -f ddr4_imem_1d.bin ]; then
objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 ddr4_imem_1d.bin ddr4_imem_1d_pad.bin
objcopy -I binary -O binary --pad-to 0x4000 --gap-fill=0x0 ddr4_dmem_1d.bin ddr4_dmem_1d_pad.bin
objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 ddr4_imem_2d.bin ddr4_imem_2d_pad.bin
cat ddr4_imem_1d_pad.bin ddr4_dmem_1d_pad.bin > ddr4_1d_fw.bin
cat ddr4_imem_2d_pad.bin ddr4_dmem_2d.bin > ddr4_2d_fw.bin
dd if=spl/u-boot-spl.bin of=spl/u-boot-spl-pad.bin bs=4 conv=sync
cat spl/u-boot-spl-pad.bin ddr4_1d_fw.bin ddr4_2d_fw.bin > spl/u-boot-spl-ddr.bin
rm -f ddr4_1d_fw.bin ddr4_2d_fw.bin ddr4_imem_1d_pad.bin ddr4_dmem_1d_pad.bin ddr4_imem_2d_pad.bin spl/u-boot-spl-pad.bin
fi
if [ -f ddr3_imem_1d.bin ]; then
objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 ddr3_imem_1d.bin ddr3_imem_1d_pad.bin
cat ddr3_imem_1d_pad.bin ddr3_dmem_1d.bin > ddr3_1d_fw.bin
dd if=spl/u-boot-spl.bin of=spl/u-boot-spl-pad.bin bs=4 conv=sync
cat spl/u-boot-spl-pad.bin ddr3_1d_fw.bin > spl/u-boot-spl-ddr.bin
rm -f ddr3_1d_fw.bin ddr3_imem_1d_pad.bin spl/u-boot-spl-pad.bin
fi
fi
exit 0