59c1ddd2c5
Currently NAND clock setup is done in board code, both in SPL and in U-Boot proper. Add the NAND clocks/resets here so they can be used by the "full" NAND driver once it is converted to the driver model. The bit locations are copied from the Linux CCU drivers. Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
126 lines
3.7 KiB
C
126 lines
3.7 KiB
C
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (C) 2018 Amarula Solutions.
|
|
* Author: Jagan Teki <jagan@amarulasolutions.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk-uclass.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <clk/sunxi.h>
|
|
#include <dt-bindings/clock/sun50i-h6-ccu.h>
|
|
#include <dt-bindings/reset/sun50i-h6-ccu.h>
|
|
#include <linux/bitops.h>
|
|
|
|
static struct ccu_clk_gate h6_gates[] = {
|
|
[CLK_PLL_PERIPH0] = GATE(0x020, BIT(31)),
|
|
|
|
[CLK_APB1] = GATE_DUMMY,
|
|
|
|
[CLK_DE] = GATE(0x600, BIT(31)),
|
|
[CLK_BUS_DE] = GATE(0x60c, BIT(0)),
|
|
|
|
[CLK_NAND0] = GATE(0x810, BIT(31)),
|
|
[CLK_NAND1] = GATE(0x814, BIT(31)),
|
|
[CLK_BUS_NAND] = GATE(0x82c, BIT(0)),
|
|
|
|
[CLK_BUS_MMC0] = GATE(0x84c, BIT(0)),
|
|
[CLK_BUS_MMC1] = GATE(0x84c, BIT(1)),
|
|
[CLK_BUS_MMC2] = GATE(0x84c, BIT(2)),
|
|
[CLK_BUS_UART0] = GATE(0x90c, BIT(0)),
|
|
[CLK_BUS_UART1] = GATE(0x90c, BIT(1)),
|
|
[CLK_BUS_UART2] = GATE(0x90c, BIT(2)),
|
|
[CLK_BUS_UART3] = GATE(0x90c, BIT(3)),
|
|
|
|
[CLK_BUS_I2C0] = GATE(0x91c, BIT(0)),
|
|
[CLK_BUS_I2C1] = GATE(0x91c, BIT(1)),
|
|
[CLK_BUS_I2C2] = GATE(0x91c, BIT(2)),
|
|
[CLK_BUS_I2C3] = GATE(0x91c, BIT(3)),
|
|
|
|
[CLK_SPI0] = GATE(0x940, BIT(31)),
|
|
[CLK_SPI1] = GATE(0x944, BIT(31)),
|
|
|
|
[CLK_BUS_SPI0] = GATE(0x96c, BIT(0)),
|
|
[CLK_BUS_SPI1] = GATE(0x96c, BIT(1)),
|
|
|
|
[CLK_BUS_EMAC] = GATE(0x97c, BIT(0)),
|
|
|
|
[CLK_USB_PHY0] = GATE(0xa70, BIT(29)),
|
|
[CLK_USB_OHCI0] = GATE(0xa70, BIT(31)),
|
|
|
|
[CLK_USB_PHY1] = GATE(0xa74, BIT(29)),
|
|
|
|
[CLK_USB_HSIC] = GATE(0xa7c, BIT(26)),
|
|
[CLK_USB_HSIC_12M] = GATE(0xa7c, BIT(27)),
|
|
[CLK_USB_PHY3] = GATE(0xa7c, BIT(29)),
|
|
[CLK_USB_OHCI3] = GATE(0xa7c, BIT(31)),
|
|
|
|
[CLK_BUS_OHCI0] = GATE(0xa8c, BIT(0)),
|
|
[CLK_BUS_OHCI3] = GATE(0xa8c, BIT(3)),
|
|
[CLK_BUS_EHCI0] = GATE(0xa8c, BIT(4)),
|
|
[CLK_BUS_XHCI] = GATE(0xa8c, BIT(5)),
|
|
[CLK_BUS_EHCI3] = GATE(0xa8c, BIT(7)),
|
|
[CLK_BUS_OTG] = GATE(0xa8c, BIT(8)),
|
|
|
|
[CLK_HDMI] = GATE(0xb00, BIT(31)),
|
|
[CLK_HDMI_SLOW] = GATE(0xb04, BIT(31)),
|
|
[CLK_HDMI_CEC] = GATE(0xb10, BIT(31)),
|
|
[CLK_BUS_HDMI] = GATE(0xb1c, BIT(0)),
|
|
[CLK_BUS_TCON_TOP] = GATE(0xb5c, BIT(0)),
|
|
[CLK_TCON_LCD0] = GATE(0xb60, BIT(31)),
|
|
[CLK_BUS_TCON_LCD0] = GATE(0xb7c, BIT(0)),
|
|
[CLK_TCON_TV0] = GATE(0xb80, BIT(31)),
|
|
[CLK_BUS_TCON_TV0] = GATE(0xb9c, BIT(0)),
|
|
};
|
|
|
|
static struct ccu_reset h6_resets[] = {
|
|
[RST_BUS_DE] = RESET(0x60c, BIT(16)),
|
|
[RST_BUS_NAND] = RESET(0x82c, BIT(16)),
|
|
|
|
[RST_BUS_MMC0] = RESET(0x84c, BIT(16)),
|
|
[RST_BUS_MMC1] = RESET(0x84c, BIT(17)),
|
|
[RST_BUS_MMC2] = RESET(0x84c, BIT(18)),
|
|
[RST_BUS_UART0] = RESET(0x90c, BIT(16)),
|
|
[RST_BUS_UART1] = RESET(0x90c, BIT(17)),
|
|
[RST_BUS_UART2] = RESET(0x90c, BIT(18)),
|
|
[RST_BUS_UART3] = RESET(0x90c, BIT(19)),
|
|
|
|
[RST_BUS_I2C0] = RESET(0x91c, BIT(16)),
|
|
[RST_BUS_I2C1] = RESET(0x91c, BIT(17)),
|
|
[RST_BUS_I2C2] = RESET(0x91c, BIT(18)),
|
|
[RST_BUS_I2C3] = RESET(0x91c, BIT(19)),
|
|
|
|
[RST_BUS_SPI0] = RESET(0x96c, BIT(16)),
|
|
[RST_BUS_SPI1] = RESET(0x96c, BIT(17)),
|
|
|
|
[RST_BUS_EMAC] = RESET(0x97c, BIT(16)),
|
|
|
|
[RST_USB_PHY0] = RESET(0xa70, BIT(30)),
|
|
|
|
[RST_USB_PHY1] = RESET(0xa74, BIT(30)),
|
|
|
|
[RST_USB_HSIC] = RESET(0xa7c, BIT(28)),
|
|
[RST_USB_PHY3] = RESET(0xa7c, BIT(30)),
|
|
|
|
[RST_BUS_OHCI0] = RESET(0xa8c, BIT(16)),
|
|
[RST_BUS_OHCI3] = RESET(0xa8c, BIT(19)),
|
|
[RST_BUS_EHCI0] = RESET(0xa8c, BIT(20)),
|
|
[RST_BUS_XHCI] = RESET(0xa8c, BIT(21)),
|
|
[RST_BUS_EHCI3] = RESET(0xa8c, BIT(23)),
|
|
[RST_BUS_OTG] = RESET(0xa8c, BIT(24)),
|
|
|
|
[RST_BUS_HDMI] = RESET(0xb1c, BIT(16)),
|
|
[RST_BUS_HDMI_SUB] = RESET(0xb1c, BIT(17)),
|
|
[RST_BUS_TCON_TOP] = RESET(0xb5c, BIT(16)),
|
|
[RST_BUS_TCON_LCD0] = RESET(0xb7c, BIT(16)),
|
|
[RST_BUS_TCON_TV0] = RESET(0xb9c, BIT(16)),
|
|
};
|
|
|
|
const struct ccu_desc h6_ccu_desc = {
|
|
.gates = h6_gates,
|
|
.resets = h6_resets,
|
|
.num_gates = ARRAY_SIZE(h6_gates),
|
|
.num_resets = ARRAY_SIZE(h6_resets),
|
|
};
|