59c1ddd2c5
Currently NAND clock setup is done in board code, both in SPL and in U-Boot proper. Add the NAND clocks/resets here so they can be used by the "full" NAND driver once it is converted to the driver model. The bit locations are copied from the Linux CCU drivers. Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
144 lines
4.3 KiB
C
144 lines
4.3 KiB
C
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (C) 2021 Jernej Skrabec <jernej.skrabec@siol.net>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk-uclass.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <clk/sunxi.h>
|
|
#include <dt-bindings/clock/sun50i-h616-ccu.h>
|
|
#include <dt-bindings/reset/sun50i-h616-ccu.h>
|
|
#include <linux/bitops.h>
|
|
|
|
static struct ccu_clk_gate h616_gates[] = {
|
|
[CLK_PLL_PERIPH0] = GATE(0x020, BIT(31) | BIT(27)),
|
|
|
|
[CLK_APB1] = GATE_DUMMY,
|
|
|
|
[CLK_DE] = GATE(0x600, BIT(31)),
|
|
[CLK_BUS_DE] = GATE(0x60c, BIT(0)),
|
|
|
|
[CLK_NAND0] = GATE(0x810, BIT(31)),
|
|
[CLK_NAND1] = GATE(0x814, BIT(31)),
|
|
[CLK_BUS_NAND] = GATE(0x82c, BIT(0)),
|
|
|
|
[CLK_BUS_MMC0] = GATE(0x84c, BIT(0)),
|
|
[CLK_BUS_MMC1] = GATE(0x84c, BIT(1)),
|
|
[CLK_BUS_MMC2] = GATE(0x84c, BIT(2)),
|
|
|
|
[CLK_BUS_UART0] = GATE(0x90c, BIT(0)),
|
|
[CLK_BUS_UART1] = GATE(0x90c, BIT(1)),
|
|
[CLK_BUS_UART2] = GATE(0x90c, BIT(2)),
|
|
[CLK_BUS_UART3] = GATE(0x90c, BIT(3)),
|
|
[CLK_BUS_UART4] = GATE(0x90c, BIT(4)),
|
|
[CLK_BUS_UART5] = GATE(0x90c, BIT(5)),
|
|
|
|
[CLK_BUS_I2C0] = GATE(0x91c, BIT(0)),
|
|
[CLK_BUS_I2C1] = GATE(0x91c, BIT(1)),
|
|
[CLK_BUS_I2C2] = GATE(0x91c, BIT(2)),
|
|
[CLK_BUS_I2C3] = GATE(0x91c, BIT(3)),
|
|
[CLK_BUS_I2C4] = GATE(0x91c, BIT(4)),
|
|
|
|
[CLK_SPI0] = GATE(0x940, BIT(31)),
|
|
[CLK_SPI1] = GATE(0x944, BIT(31)),
|
|
|
|
[CLK_BUS_SPI0] = GATE(0x96c, BIT(0)),
|
|
[CLK_BUS_SPI1] = GATE(0x96c, BIT(1)),
|
|
|
|
[CLK_BUS_EMAC0] = GATE(0x97c, BIT(0)),
|
|
[CLK_BUS_EMAC1] = GATE(0x97c, BIT(1)),
|
|
|
|
[CLK_USB_PHY0] = GATE(0xa70, BIT(29)),
|
|
[CLK_USB_OHCI0] = GATE(0xa70, BIT(31)),
|
|
|
|
[CLK_USB_PHY1] = GATE(0xa74, BIT(29)),
|
|
[CLK_USB_OHCI1] = GATE(0xa74, BIT(31)),
|
|
|
|
[CLK_USB_PHY2] = GATE(0xa78, BIT(29)),
|
|
[CLK_USB_OHCI2] = GATE(0xa78, BIT(31)),
|
|
|
|
[CLK_USB_PHY3] = GATE(0xa7c, BIT(29)),
|
|
[CLK_USB_OHCI3] = GATE(0xa7c, BIT(31)),
|
|
|
|
[CLK_BUS_OHCI0] = GATE(0xa8c, BIT(0)),
|
|
[CLK_BUS_OHCI1] = GATE(0xa8c, BIT(1)),
|
|
[CLK_BUS_OHCI2] = GATE(0xa8c, BIT(2)),
|
|
[CLK_BUS_OHCI3] = GATE(0xa8c, BIT(3)),
|
|
[CLK_BUS_EHCI0] = GATE(0xa8c, BIT(4)),
|
|
[CLK_BUS_EHCI1] = GATE(0xa8c, BIT(5)),
|
|
[CLK_BUS_EHCI2] = GATE(0xa8c, BIT(6)),
|
|
[CLK_BUS_EHCI3] = GATE(0xa8c, BIT(7)),
|
|
[CLK_BUS_OTG] = GATE(0xa8c, BIT(8)),
|
|
|
|
[CLK_HDMI] = GATE(0xb00, BIT(31)),
|
|
[CLK_HDMI_SLOW] = GATE(0xb04, BIT(31)),
|
|
[CLK_HDMI_CEC] = GATE(0xb10, BIT(31)),
|
|
[CLK_BUS_HDMI] = GATE(0xb1c, BIT(0)),
|
|
[CLK_BUS_TCON_TOP] = GATE(0xb5c, BIT(0)),
|
|
[CLK_TCON_TV0] = GATE(0xb80, BIT(31)),
|
|
[CLK_TCON_TV1] = GATE(0xb84, BIT(31)),
|
|
[CLK_BUS_TCON_TV0] = GATE(0xb9c, BIT(0)),
|
|
[CLK_BUS_TCON_TV1] = GATE(0xb9c, BIT(1)),
|
|
};
|
|
|
|
static struct ccu_reset h616_resets[] = {
|
|
[RST_BUS_DE] = RESET(0x60c, BIT(16)),
|
|
[RST_BUS_NAND] = RESET(0x82c, BIT(16)),
|
|
|
|
[RST_BUS_MMC0] = RESET(0x84c, BIT(16)),
|
|
[RST_BUS_MMC1] = RESET(0x84c, BIT(17)),
|
|
[RST_BUS_MMC2] = RESET(0x84c, BIT(18)),
|
|
|
|
[RST_BUS_UART0] = RESET(0x90c, BIT(16)),
|
|
[RST_BUS_UART1] = RESET(0x90c, BIT(17)),
|
|
[RST_BUS_UART2] = RESET(0x90c, BIT(18)),
|
|
[RST_BUS_UART3] = RESET(0x90c, BIT(19)),
|
|
[RST_BUS_UART4] = RESET(0x90c, BIT(20)),
|
|
[RST_BUS_UART5] = RESET(0x90c, BIT(21)),
|
|
|
|
[RST_BUS_I2C0] = RESET(0x91c, BIT(16)),
|
|
[RST_BUS_I2C1] = RESET(0x91c, BIT(17)),
|
|
[RST_BUS_I2C2] = RESET(0x91c, BIT(18)),
|
|
[RST_BUS_I2C3] = RESET(0x91c, BIT(19)),
|
|
[RST_BUS_I2C4] = RESET(0x91c, BIT(20)),
|
|
|
|
[RST_BUS_SPI0] = RESET(0x96c, BIT(16)),
|
|
[RST_BUS_SPI1] = RESET(0x96c, BIT(17)),
|
|
|
|
[RST_BUS_EMAC0] = RESET(0x97c, BIT(16)),
|
|
[RST_BUS_EMAC1] = RESET(0x97c, BIT(17)),
|
|
|
|
[RST_USB_PHY0] = RESET(0xa70, BIT(30)),
|
|
|
|
[RST_USB_PHY1] = RESET(0xa74, BIT(30)),
|
|
|
|
[RST_USB_PHY2] = RESET(0xa78, BIT(30)),
|
|
|
|
[RST_USB_PHY3] = RESET(0xa7c, BIT(30)),
|
|
|
|
[RST_BUS_OHCI0] = RESET(0xa8c, BIT(16)),
|
|
[RST_BUS_OHCI1] = RESET(0xa8c, BIT(17)),
|
|
[RST_BUS_OHCI2] = RESET(0xa8c, BIT(18)),
|
|
[RST_BUS_OHCI3] = RESET(0xa8c, BIT(19)),
|
|
[RST_BUS_EHCI0] = RESET(0xa8c, BIT(20)),
|
|
[RST_BUS_EHCI1] = RESET(0xa8c, BIT(21)),
|
|
[RST_BUS_EHCI2] = RESET(0xa8c, BIT(22)),
|
|
[RST_BUS_EHCI3] = RESET(0xa8c, BIT(23)),
|
|
[RST_BUS_OTG] = RESET(0xa8c, BIT(24)),
|
|
|
|
[RST_BUS_HDMI] = RESET(0xb1c, BIT(16)),
|
|
[RST_BUS_HDMI_SUB] = RESET(0xb1c, BIT(17)),
|
|
[RST_BUS_TCON_TOP] = RESET(0xb5c, BIT(16)),
|
|
[RST_BUS_TCON_TV0] = RESET(0xb9c, BIT(16)),
|
|
[RST_BUS_TCON_TV1] = RESET(0xb9c, BIT(17)),
|
|
};
|
|
|
|
const struct ccu_desc h616_ccu_desc = {
|
|
.gates = h616_gates,
|
|
.resets = h616_resets,
|
|
.num_gates = ARRAY_SIZE(h616_gates),
|
|
.num_resets = ARRAY_SIZE(h616_resets),
|
|
};
|