u-boot/configs/mt7986a_bpir3_emmc_defconfig
Tom Rini 007ae5d108 lmb: Default to not-LMB_USE_MAX_REGIONS
The LMB code allows for picking a hard limit on the number of regions it
can know of, or to dynamically allocate these regions. The reason for
this choice is to allow for the compiler to perform a size optimization
in the common case. This optimization however, is very small, ranging
from 196 bytes to 15 bytes saved, or in some cases, being larger. Now
that we also have more regions covered by LMB (in order to protect
various parts of our self at run time), the default of 8 is also much
easier to hit and leads to non-obvious error messages (which imply that
an area is protected, not that we're out of areas to add to the list).

Switch to the dynamic use as the default.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-02-06 12:07:18 -05:00

65 lines
1.5 KiB
Plaintext

CONFIG_ARM=y
CONFIG_SYS_HAS_NONCACHED_MEMORY=y
CONFIG_POSITION_INDEPENDENT=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_TEXT_BASE=0x41e00000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x80000
CONFIG_ENV_OFFSET=0x300000
CONFIG_DEFAULT_DEVICE_TREE="mt7986a-emmc-rfb"
CONFIG_SYS_PROMPT="MT7986> "
CONFIG_TARGET_MT7986=y
CONFIG_DEBUG_UART_BASE=0x11002000
CONFIG_DEBUG_UART_CLOCK=40000000
CONFIG_SYS_LOAD_ADDR=0x46000000
CONFIG_DEBUG_UART=y
# CONFIG_AUTOBOOT is not set
CONFIG_DEFAULT_FDT_FILE="mt7986a-emmc-rfb"
CONFIG_LOGLEVEL=7
CONFIG_LOG=y
CONFIG_SYS_CBSIZE=512
CONFIG_SYS_PBSIZE=1049
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
# CONFIG_BOOTM_VXWORKS is not set
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_UNLZ4 is not set
# CONFIG_CMD_UNZIP is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_GPT_RENAME=y
CONFIG_CMD_LSBLK=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y
CONFIG_CMD_READ=y
CONFIG_CMD_PING=y
CONFIG_CMD_SMC=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CLK=y
CONFIG_MMC_HS200_SUPPORT=y
CONFIG_MMC_MTK=y
CONFIG_PHY_FIXED=y
CONFIG_MEDIATEK_ETH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_PINCTRL_MT7986=y
CONFIG_POWER_DOMAIN=y
CONFIG_MTK_POWER_DOMAIN=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_SERIAL=y
CONFIG_MTK_SERIAL=y
CONFIG_FAT_WRITE=y
CONFIG_HEXDUMP=y
# CONFIG_EFI_LOADER is not set