u-boot/configs/devkit8000_defconfig
Tom Rini 08574ed339 Convert CONFIG_SYS_MONITOR_LEN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MONITOR_LEN

To do this, we set a default of 0 for everyone because there are a
number of cases where we define CONFIG_SYS_MONITOR_LEN but the only
impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN +
CONFIG_ENV_SIZE, so we must continue to allow all boards to set this
value. Update the SPL code to use 200 KB as the default raw U-Boot size
directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:55 -05:00

88 lines
2.5 KiB
Plaintext

CONFIG_ARM=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TEXT_BASE=0x80100000
CONFIG_SYS_MALLOC_LEN=0x40000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_NR_DRAM_BANKS=2
CONFIG_DEFAULT_DEVICE_TREE="omap3-devkit8000"
CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_TARGET_DEVKIT8000=y
CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
CONFIG_SYS_MONITOR_LEN=262144
CONFIG_BOOTCOMMAND="run autoboot"
CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SPL_MAX_SIZE=0xec00
CONFIG_SPL_BSS_START_ADDR=0x80000500
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SYS_SPL_MALLOC=y
CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80208000
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SPL_NAND_ECC=y
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_SPL_NAND_BASE=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SYS_SPL_ARGS_ADDR=0x80000100
CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x500
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x8
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=8
CONFIG_SYS_MAXARGS=64
# CONFIG_CMD_IMI is not set
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_NAND_OFS=0x280000
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_NAND_LOCK_UNLOCK=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_BOOTP_DNS2=y
CONFIG_BOOTP_NISDOMAIN=y
CONFIG_BOOTP_NTPSERVER=y
CONFIG_CMD_JFFS2=y
CONFIG_JFFS2_DEV="nand0"
CONFIG_JFFS2_PART_OFFSET=0x680000
CONFIG_JFFS2_PART_SIZE=0xF980000
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs)"
# CONFIG_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="clocks clock-names interrupt-parent"
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RETRY_COUNT=20
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_OF_TRANSLATE=y
CONFIG_DM_I2C=y
CONFIG_TWL4030_LED=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_OMAP_ECCSCHEME_HAM1_CODE_HW=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
CONFIG_SYS_NAND_PAGE_COUNT=0x40
CONFIG_SYS_NAND_PAGE_SIZE=0x800
CONFIG_SYS_NAND_OOBSIZE=0x40
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
CONFIG_DRIVER_DM9000=y
CONFIG_JFFS2_NAND=y