15e30106ce
vexpress_ca9x4 is seemingly the only board except for qemu_arm which
is able to run U-Boot correctly, using the `-M vexpress-a9` option to
QEMU. Building for qemu_arm and running qemu-system-arm with the `-M
virt` argument has a number of downsides, most importantly that it
only supports virtio storage drivers. This significantly reduces its
usefulness in testing memory card and Flash solutions, especially when
the tested images are from a third party source.
So therefore we reintroduce the vexpress_ca9x4 board in this commit,
with the explicit goal of using it with QEMU.
A number of differences to note from the original:
* Since the board was apparently unmaintained, I have now set myself
as the maintainer.
* The board has been converted to use the driver model, which was the
reason it was removed in the first place.
* The vexpress_ca15_tc2 and vexpress_ca5x2 boards, which were removed
in the same commit, are not necessary for the QEMU use case, and
have been omitted.
* An `mmc0` alias was introduced in the dts file. The mmc is not
detected correctly without this, now that it's based on the device
tree instead of the board's init function.
* A couple of other nodes were removed because they were problematic
when trying to run the UEFI bootmgr. Once again, the primary use
case here is QEMU, and these nodes are not needed for that to work.
* Unnecessary board init code has been removed, thanks to driver model
and device tree.
* `CONFIG_OF_EMBED` has been enabled. I know this goes against
recommended practice, but there doesn't seem to be any other way to
pass the dtb to U-Boot in the QEMU scenario. Using the -dtb argument
does not work, I suppose because U-Boot doesn't use the same
mechanics as the kernel when it's booting.
* Load addresses have been changed to fit QEMU use case.
People wanting to get a more detailed, yet somewhat isolated, diff
between this and the original, can run this command:
git diff c6c26a05b89f25a06e7562f8c2071b60fd0c9eac~1 -- \
$( git diff-tree --diff-filter=A -r --name-only HEAD~1 HEAD)
(Make sure to either check out this commit first, or replace HEAD with
the commit ID of this commit)
Signed-off-by: Kristian Amlie <kristian.amlie@northern.tech>
490 lines
18 KiB
YAML
490 lines
18 KiB
YAML
variables:
|
||
windows_vm: vs2017-win2016
|
||
ubuntu_vm: ubuntu-18.04
|
||
macos_vm: macOS-10.15
|
||
ci_runner_image: trini/u-boot-gitlab-ci-runner:focal-20210827-11Sep2021
|
||
# Add '-u 0' options for Azure pipelines, otherwise we get "permission
|
||
# denied" error when it tries to "useradd -m -u 1001 vsts_azpcontainer",
|
||
# since our $(ci_runner_image) user is not root.
|
||
container_option: -u 0
|
||
work_dir: /u
|
||
|
||
jobs:
|
||
- job: tools_only_windows
|
||
displayName: 'Ensure host tools build for Windows'
|
||
pool:
|
||
vmImage: $(windows_vm)
|
||
steps:
|
||
- powershell: |
|
||
(New-Object Net.WebClient).DownloadFile("https://github.com/msys2/msys2-installer/releases/download/2021-06-04/msys2-base-x86_64-20210604.sfx.exe", "sfx.exe")
|
||
displayName: 'Install MSYS2'
|
||
- script: |
|
||
sfx.exe -y -o%CD:~0,2%\
|
||
%CD:~0,2%\msys64\usr\bin\bash -lc "pacman --noconfirm -Syyuu"
|
||
displayName: 'Update MSYS2'
|
||
- script: |
|
||
%CD:~0,2%\msys64\usr\bin\bash -lc "pacman --noconfirm --needed -Sy make gcc bison flex diffutils openssl-devel"
|
||
displayName: 'Install Toolchain'
|
||
- script: |
|
||
echo make tools-only_defconfig tools-only NO_SDL=1 > build-tools.sh
|
||
%CD:~0,2%\msys64\usr\bin\bash -lc "bash build-tools.sh"
|
||
displayName: 'Build Host Tools'
|
||
env:
|
||
# Tell MSYS2 we need a POSIX emulation layer
|
||
MSYSTEM: MSYS
|
||
# Tell MSYS2 not to ‘cd’ our startup directory to HOME
|
||
CHERE_INVOKING: yes
|
||
|
||
- job: tools_only_macOS
|
||
displayName: 'Ensure host tools build for macOS X'
|
||
pool:
|
||
vmImage: $(macos_vm)
|
||
steps:
|
||
- script: brew install make
|
||
displayName: Brew install dependencies
|
||
- script: |
|
||
gmake tools-only_config tools-only NO_SDL=1 \
|
||
HOSTCFLAGS="-I/usr/local/opt/openssl@1.1/include" \
|
||
HOSTLDFLAGS="-L/usr/local/opt/openssl@1.1/lib" \
|
||
-j$(sysctl -n hw.logicalcpu)
|
||
displayName: 'Perform tools-only build'
|
||
|
||
- job: cppcheck
|
||
displayName: 'Static code analysis with cppcheck'
|
||
pool:
|
||
vmImage: $(ubuntu_vm)
|
||
container:
|
||
image: $(ci_runner_image)
|
||
options: $(container_option)
|
||
steps:
|
||
- script: cppcheck -j$(nproc) --force --quiet --inline-suppr .
|
||
|
||
- job: htmldocs
|
||
displayName: 'Build HTML documentation'
|
||
pool:
|
||
vmImage: $(ubuntu_vm)
|
||
container:
|
||
image: $(ci_runner_image)
|
||
options: $(container_option)
|
||
steps:
|
||
- script: |
|
||
virtualenv -p /usr/bin/python3 /tmp/venvhtml
|
||
. /tmp/venvhtml/bin/activate
|
||
pip install -r doc/sphinx/requirements.txt
|
||
make htmldocs
|
||
|
||
- job: todo
|
||
displayName: 'Search for TODO within source tree'
|
||
pool:
|
||
vmImage: $(ubuntu_vm)
|
||
container:
|
||
image: $(ci_runner_image)
|
||
options: $(container_option)
|
||
steps:
|
||
- script: grep -r TODO .
|
||
- script: grep -r FIXME .
|
||
- script: grep -r HACK . | grep -v HACKKIT
|
||
|
||
- job: sloccount
|
||
displayName: 'Some statistics about the code base'
|
||
pool:
|
||
vmImage: $(ubuntu_vm)
|
||
container:
|
||
image: $(ci_runner_image)
|
||
options: $(container_option)
|
||
steps:
|
||
- script: sloccount .
|
||
|
||
- job: maintainers
|
||
displayName: 'Ensure all configs have MAINTAINERS entries'
|
||
pool:
|
||
vmImage: $(ubuntu_vm)
|
||
container:
|
||
image: $(ci_runner_image)
|
||
options: $(container_option)
|
||
steps:
|
||
- script: |
|
||
if [ `./tools/genboardscfg.py -f 2>&1 | wc -l` -ne 0 ]; then exit 1; fi
|
||
|
||
- job: tools_only
|
||
displayName: 'Ensure host tools build'
|
||
pool:
|
||
vmImage: $(ubuntu_vm)
|
||
container:
|
||
image: $(ci_runner_image)
|
||
options: $(container_option)
|
||
steps:
|
||
- script: |
|
||
make tools-only_config tools-only -j$(nproc)
|
||
|
||
- job: envtools
|
||
displayName: 'Ensure env tools build'
|
||
pool:
|
||
vmImage: $(ubuntu_vm)
|
||
container:
|
||
image: $(ci_runner_image)
|
||
options: $(container_option)
|
||
steps:
|
||
- script: |
|
||
make tools-only_config envtools -j$(nproc)
|
||
|
||
- job: utils
|
||
displayName: 'Run binman, buildman, dtoc, Kconfig and patman testsuites'
|
||
pool:
|
||
vmImage: $(ubuntu_vm)
|
||
steps:
|
||
- script: |
|
||
cat << EOF > build.sh
|
||
set -ex
|
||
cd ${WORK_DIR}
|
||
EOF
|
||
cat << "EOF" >> build.sh
|
||
git config --global user.name "Azure Pipelines"
|
||
git config --global user.email bmeng.cn@gmail.com
|
||
export USER=azure
|
||
virtualenv -p /usr/bin/python3 /tmp/venv
|
||
. /tmp/venv/bin/activate
|
||
pip install -r test/py/requirements.txt
|
||
export UBOOT_TRAVIS_BUILD_DIR=/tmp/sandbox_spl
|
||
export PYTHONPATH=${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc/pylibfdt
|
||
export PATH=${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc:${PATH}
|
||
./tools/buildman/buildman -T0 -o ${UBOOT_TRAVIS_BUILD_DIR} -w --board sandbox_spl
|
||
./tools/binman/binman --toolpath ${UBOOT_TRAVIS_BUILD_DIR}/tools test
|
||
./tools/buildman/buildman -t
|
||
./tools/dtoc/dtoc -t
|
||
./tools/patman/patman test
|
||
make O=${UBOOT_TRAVIS_BUILD_DIR} testconfig
|
||
EOF
|
||
cat build.sh
|
||
# We cannot use "container" like other jobs above, as buildman
|
||
# seems to hang forever with pre-configured "container" environment
|
||
docker run -v $PWD:$(work_dir) $(ci_runner_image) /bin/bash $(work_dir)/build.sh
|
||
|
||
- job: nokia_rx51_test
|
||
displayName: 'Run tests for Nokia RX-51 (aka N900)'
|
||
pool:
|
||
vmImage: $(ubuntu_vm)
|
||
container:
|
||
image: $(ci_runner_image)
|
||
options: $(container_option)
|
||
steps:
|
||
- script: |
|
||
./tools/buildman/buildman --fetch-arch arm
|
||
export PATH=~/.buildman-toolchains/gcc-9.2.0-nolibc/arm-linux-gnueabi/bin/:$PATH
|
||
test/nokia_rx51_test.sh
|
||
|
||
- job: test_py
|
||
displayName: 'test.py'
|
||
pool:
|
||
vmImage: $(ubuntu_vm)
|
||
strategy:
|
||
matrix:
|
||
sandbox:
|
||
TEST_PY_BD: "sandbox"
|
||
sandbox_clang:
|
||
TEST_PY_BD: "sandbox"
|
||
OVERRIDE: "-O clang-12"
|
||
sandbox_spl:
|
||
TEST_PY_BD: "sandbox_spl"
|
||
TEST_PY_TEST_SPEC: "test_ofplatdata or test_handoff or test_spl"
|
||
sandbox_noinst:
|
||
TEST_PY_BD: "sandbox_noinst"
|
||
TEST_PY_TEST_SPEC: "test_ofplatdata or test_handoff or test_spl"
|
||
sandbox_flattree:
|
||
TEST_PY_BD: "sandbox_flattree"
|
||
evb_ast2500:
|
||
TEST_PY_BD: "evb-ast2500"
|
||
TEST_PY_ID: "--id qemu"
|
||
vexpress_ca9x4:
|
||
TEST_PY_BD: "vexpress_ca9x4"
|
||
TEST_PY_ID: "--id qemu"
|
||
integratorcp_cm926ejs:
|
||
TEST_PY_BD: "integratorcp_cm926ejs"
|
||
TEST_PY_ID: "--id qemu"
|
||
TEST_PY_TEST_SPEC: "not sleep"
|
||
qemu_arm:
|
||
TEST_PY_BD: "qemu_arm"
|
||
TEST_PY_TEST_SPEC: "not sleep"
|
||
qemu_arm64:
|
||
TEST_PY_BD: "qemu_arm64"
|
||
TEST_PY_TEST_SPEC: "not sleep"
|
||
qemu_malta:
|
||
TEST_PY_BD: "malta"
|
||
TEST_PY_ID: "--id qemu"
|
||
TEST_PY_TEST_SPEC: "not sleep and not efi"
|
||
qemu_maltael:
|
||
TEST_PY_BD: "maltael"
|
||
TEST_PY_ID: "--id qemu"
|
||
TEST_PY_TEST_SPEC: "not sleep and not efi"
|
||
qemu_malta64:
|
||
TEST_PY_BD: "malta64"
|
||
TEST_PY_ID: "--id qemu"
|
||
TEST_PY_TEST_SPEC: "not sleep and not efi"
|
||
qemu_malta64el:
|
||
TEST_PY_BD: "malta64el"
|
||
TEST_PY_ID: "--id qemu"
|
||
TEST_PY_TEST_SPEC: "not sleep and not efi"
|
||
qemu_ppce500:
|
||
TEST_PY_BD: "qemu-ppce500"
|
||
TEST_PY_TEST_SPEC: "not sleep"
|
||
qemu_riscv32:
|
||
TEST_PY_BD: "qemu-riscv32"
|
||
TEST_PY_TEST_SPEC: "not sleep"
|
||
qemu_riscv64:
|
||
TEST_PY_BD: "qemu-riscv64"
|
||
TEST_PY_TEST_SPEC: "not sleep"
|
||
qemu_riscv32_spl:
|
||
TEST_PY_BD: "qemu-riscv32_spl"
|
||
TEST_PY_TEST_SPEC: "not sleep"
|
||
qemu_riscv64_spl:
|
||
TEST_PY_BD: "qemu-riscv64_spl"
|
||
TEST_PY_TEST_SPEC: "not sleep"
|
||
qemu_x86:
|
||
TEST_PY_BD: "qemu-x86"
|
||
TEST_PY_TEST_SPEC: "not sleep"
|
||
qemu_x86_64:
|
||
TEST_PY_BD: "qemu-x86_64"
|
||
TEST_PY_TEST_SPEC: "not sleep"
|
||
r2dplus_i82557c:
|
||
TEST_PY_BD: "r2dplus"
|
||
TEST_PY_ID: "--id i82557c_qemu"
|
||
r2dplus_pcnet:
|
||
TEST_PY_BD: "r2dplus"
|
||
TEST_PY_ID: "--id pcnet_qemu"
|
||
r2dplus_rtl8139:
|
||
TEST_PY_BD: "r2dplus"
|
||
TEST_PY_ID: "--id rtl8139_qemu"
|
||
r2dplus_tulip:
|
||
TEST_PY_BD: "r2dplus"
|
||
TEST_PY_ID: "--id tulip_qemu"
|
||
sifive_unleashed_sdcard:
|
||
TEST_PY_BD: "sifive_unleashed"
|
||
TEST_PY_ID: "--id sdcard_qemu"
|
||
sifive_unleashed_spi-nor:
|
||
TEST_PY_BD: "sifive_unleashed"
|
||
TEST_PY_ID: "--id spi-nor_qemu"
|
||
xilinx_zynq_virt:
|
||
TEST_PY_BD: "xilinx_zynq_virt"
|
||
TEST_PY_ID: "--id qemu"
|
||
TEST_PY_TEST_SPEC: "not sleep"
|
||
xilinx_versal_virt:
|
||
TEST_PY_BD: "xilinx_versal_virt"
|
||
TEST_PY_ID: "--id qemu"
|
||
TEST_PY_TEST_SPEC: "not sleep"
|
||
xtfpga:
|
||
TEST_PY_BD: "xtfpga"
|
||
TEST_PY_ID: "--id qemu"
|
||
TEST_PY_TEST_SPEC: "not sleep"
|
||
steps:
|
||
- script: |
|
||
cat << EOF > test.sh
|
||
set -ex
|
||
# make environment variables available as tests are running inside a container
|
||
export WORK_DIR="${WORK_DIR}"
|
||
export TEST_PY_BD="${TEST_PY_BD}"
|
||
export TEST_PY_ID="${TEST_PY_ID}"
|
||
export TEST_PY_TEST_SPEC="${TEST_PY_TEST_SPEC}"
|
||
export OVERRIDE="${OVERRIDE}"
|
||
EOF
|
||
cat << "EOF" >> test.sh
|
||
# the below corresponds to .gitlab-ci.yml "before_script"
|
||
cd ${WORK_DIR}
|
||
git clone --depth=1 https://source.denx.de/u-boot/u-boot-test-hooks /tmp/uboot-test-hooks
|
||
ln -s travis-ci /tmp/uboot-test-hooks/bin/`hostname`
|
||
ln -s travis-ci /tmp/uboot-test-hooks/py/`hostname`
|
||
grub-mkimage --prefix=\"\" -o ~/grub_x86.efi -O i386-efi normal echo lsefimmap lsefi lsefisystab efinet tftp minicmd
|
||
grub-mkimage --prefix=\"\" -o ~/grub_x64.efi -O x86_64-efi normal echo lsefimmap lsefi lsefisystab efinet tftp minicmd
|
||
if [[ "${TEST_PY_BD}" == "qemu-riscv32_spl" ]]; then
|
||
wget -O - https://github.com/riscv/opensbi/releases/download/v0.9/opensbi-0.9-rv-bin.tar.xz | tar -C /tmp -xJ;
|
||
export OPENSBI=/tmp/opensbi-0.9-rv-bin/share/opensbi/ilp32/generic/firmware/fw_dynamic.bin;
|
||
fi
|
||
if [[ "${TEST_PY_BD}" == "qemu-riscv64_spl" ]] || [[ "${TEST_PY_BD}" == "sifive_unleashed" ]]; then
|
||
wget -O - https://github.com/riscv/opensbi/releases/download/v0.9/opensbi-0.9-rv-bin.tar.xz | tar -C /tmp -xJ;
|
||
export OPENSBI=/tmp/opensbi-0.9-rv-bin/share/opensbi/lp64/generic/firmware/fw_dynamic.bin;
|
||
fi
|
||
# the below corresponds to .gitlab-ci.yml "script"
|
||
cd ${WORK_DIR}
|
||
export UBOOT_TRAVIS_BUILD_DIR=/tmp/${TEST_PY_BD};
|
||
tools/buildman/buildman -o ${UBOOT_TRAVIS_BUILD_DIR} -w -E -W -e --board ${TEST_PY_BD} ${OVERRIDE}
|
||
cp ~/grub_x86.efi ${UBOOT_TRAVIS_BUILD_DIR}/
|
||
cp ~/grub_x64.efi ${UBOOT_TRAVIS_BUILD_DIR}/
|
||
cp /opt/grub/grubriscv64.efi ${UBOOT_TRAVIS_BUILD_DIR}/grub_riscv64.efi
|
||
cp /opt/grub/grubaa64.efi ${UBOOT_TRAVIS_BUILD_DIR}/grub_arm64.efi
|
||
cp /opt/grub/grubarm.efi ${UBOOT_TRAVIS_BUILD_DIR}/grub_arm.efi
|
||
# create sdcard / spi-nor images for sifive unleashed using genimage
|
||
if [[ "${TEST_PY_BD}" == "sifive_unleashed" ]]; then
|
||
mkdir -p root;
|
||
cp ${UBOOT_TRAVIS_BUILD_DIR}/spl/u-boot-spl.bin .;
|
||
cp ${UBOOT_TRAVIS_BUILD_DIR}/u-boot.itb .;
|
||
rm -rf tmp;
|
||
genimage --inputpath . --config board/sifive/unleashed/genimage_sdcard.cfg;
|
||
cp images/sdcard.img ${UBOOT_TRAVIS_BUILD_DIR}/;
|
||
rm -rf tmp;
|
||
genimage --inputpath . --config board/sifive/unleashed/genimage_spi-nor.cfg;
|
||
cp images/spi-nor.img ${UBOOT_TRAVIS_BUILD_DIR}/;
|
||
fi
|
||
virtualenv -p /usr/bin/python3 /tmp/venv
|
||
. /tmp/venv/bin/activate
|
||
pip install -r test/py/requirements.txt
|
||
export PATH=/opt/qemu/bin:/tmp/uboot-test-hooks/bin:${PATH};
|
||
export PYTHONPATH=/tmp/uboot-test-hooks/py/travis-ci;
|
||
# "${var:+"-k $var"}" expands to "" if $var is empty, "-k $var" if not
|
||
./test/py/test.py -ra --bd ${TEST_PY_BD} ${TEST_PY_ID} ${TEST_PY_TEST_SPEC:+"-k ${TEST_PY_TEST_SPEC}"} --build-dir "$UBOOT_TRAVIS_BUILD_DIR";
|
||
# the below corresponds to .gitlab-ci.yml "after_script"
|
||
rm -rf /tmp/uboot-test-hooks /tmp/venv
|
||
EOF
|
||
cat test.sh
|
||
# make current directory writeable to uboot user inside the container
|
||
# as sandbox testing need create files like spi flash images, etc.
|
||
# (TODO: clean up this in the future)
|
||
chmod 777 .
|
||
# Filesystem tests need extra docker args to run
|
||
set --
|
||
if [[ "${TEST_PY_BD}" == "sandbox" ]]; then
|
||
# mount -o loop needs the loop devices
|
||
if modprobe loop; then
|
||
for d in $(find /dev -maxdepth 1 -name 'loop*'); do
|
||
set -- "$@" --device $d:$d
|
||
done
|
||
fi
|
||
# Needed for mount syscall (for guestmount as well)
|
||
set -- "$@" --cap-add SYS_ADMIN
|
||
# Default apparmor profile denies mounts
|
||
set -- "$@" --security-opt apparmor=unconfined
|
||
fi
|
||
# Some tests using libguestfs-tools need the fuse device to run
|
||
docker run "$@" --device /dev/fuse:/dev/fuse -v $PWD:$(work_dir) $(ci_runner_image) /bin/bash $(work_dir)/test.sh
|
||
|
||
- job: build_the_world
|
||
displayName: 'Build the World'
|
||
pool:
|
||
vmImage: $(ubuntu_vm)
|
||
strategy:
|
||
# Use almost the same target division in .travis.yml, only merged
|
||
# 4 small build jobs (arc/microblaze/nds32/xtensa) into one.
|
||
matrix:
|
||
arc_microblaze_nds32_xtensa:
|
||
BUILDMAN: "arc microblaze nds32 xtensa"
|
||
arm11_arm7_arm920t_arm946es:
|
||
BUILDMAN: "arm11 arm7 arm920t arm946es"
|
||
arm926ejs:
|
||
BUILDMAN: "arm926ejs -x freescale,siemens,at91,kirkwood,omap"
|
||
at91_non_armv7:
|
||
BUILDMAN: "at91 -x armv7"
|
||
at91_non_arm926ejs:
|
||
BUILDMAN: "at91 -x arm926ejs"
|
||
boundary_engicam_toradex:
|
||
BUILDMAN: "boundary engicam toradex"
|
||
arm_bcm:
|
||
BUILDMAN: "bcm -x mips"
|
||
nxp_arm32:
|
||
BUILDMAN: "freescale -x powerpc,m68k,aarch64,ls101,ls102,ls104,ls108,ls20,lx216"
|
||
nxp_ls101x:
|
||
BUILDMAN: "freescale&ls101"
|
||
nxp_ls102x:
|
||
BUILDMAN: "freescale&ls102"
|
||
nxp_ls104x:
|
||
BUILDMAN: "freescale&ls104"
|
||
nxp_ls108x:
|
||
BUILDMAN: "freescale&ls108"
|
||
nxp_ls20xx:
|
||
BUILDMAN: "freescale&ls20"
|
||
nxp_lx216x:
|
||
BUILDMAN: "freescale&lx216"
|
||
imx6:
|
||
BUILDMAN: "mx6 -x boundary,engicam,freescale,technexion,toradex"
|
||
imx:
|
||
BUILDMAN: "mx -x mx6,freescale,technexion,toradex"
|
||
imx8:
|
||
BUILDMAN: "imx8"
|
||
keystone2_keystone3:
|
||
BUILDMAN: "k2 k3"
|
||
samsung_socfpga:
|
||
BUILDMAN: "samsung socfpga"
|
||
sun4i:
|
||
BUILDMAN: "sun4i"
|
||
sun5i:
|
||
BUILDMAN: "sun5i"
|
||
sun6i:
|
||
BUILDMAN: "sun6i"
|
||
sun7i:
|
||
BUILDMAN: "sun7i"
|
||
sun8i_32bit:
|
||
BUILDMAN: "sun8i&armv7"
|
||
sun8i_64bit:
|
||
BUILDMAN: "sun8i&aarch64"
|
||
sun9i:
|
||
BUILDMAN: "sun9i"
|
||
sun50i:
|
||
BUILDMAN: "sun50i"
|
||
arm_catch_all:
|
||
BUILDMAN: "arm -x arm11,arm7,arm9,aarch64,at91,bcm,freescale,kirkwood,mvebu,renesas,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,rk,toradex,socfpga,k2,k3,zynq"
|
||
sandbox_x86:
|
||
BUILDMAN: "sandbox x86"
|
||
technexion:
|
||
BUILDMAN: "technexion"
|
||
kirkwood:
|
||
BUILDMAN: "kirkwood"
|
||
mvebu:
|
||
BUILDMAN: "mvebu"
|
||
m68k:
|
||
BUILDMAN: "m68k"
|
||
mips:
|
||
BUILDMAN: "mips"
|
||
non_fsl_ppc:
|
||
BUILDMAN: "powerpc -x freescale"
|
||
mpc85xx_freescale:
|
||
BUILDMAN: "mpc85xx&freescale -x t208xrdb -x t102* -x p1_p2_rdb_pc -x p1010rdb -x corenet_ds -x bsc91*"
|
||
t208xrdb_corenet_ds:
|
||
BUILDMAN: "t208xrdb corenet_ds"
|
||
fsl_ppc:
|
||
BUILDMAN: "mpc83xx&freescale"
|
||
t102x:
|
||
BUILDMAN: "t102*"
|
||
p1_p2_rdb_pc:
|
||
BUILDMAN: "p1_p2_rdb_pc"
|
||
p1010rdb_bsc91:
|
||
BUILDMAN: "p1010rdb bsc91"
|
||
siemens:
|
||
BUILDMAN: "siemens"
|
||
tegra:
|
||
BUILDMAN: "tegra -x toradex"
|
||
am33xx_no_siemens:
|
||
BUILDMAN: "am33xx -x siemens"
|
||
omap:
|
||
BUILDMAN: "omap"
|
||
uniphier:
|
||
BUILDMAN: "uniphier"
|
||
aarch64_catch_all:
|
||
BUILDMAN: "aarch64 -x bcm,imx8,k3,tegra,ls1,ls2,lx216,mvebu,uniphier,renesas,sunxi,samsung,socfpga,rk,versal,zynq"
|
||
rockchip:
|
||
BUILDMAN: "rk"
|
||
renesas:
|
||
BUILDMAN: "renesas"
|
||
zynq:
|
||
BUILDMAN: "zynq&armv7"
|
||
zynqmp_versal:
|
||
BUILDMAN: "versal|zynqmp&aarch64"
|
||
riscv:
|
||
BUILDMAN: "riscv"
|
||
steps:
|
||
- script: |
|
||
cat << EOF > build.sh
|
||
set -ex
|
||
cd ${WORK_DIR}
|
||
# make environment variables available as tests are running inside a container
|
||
export BUILDMAN="${BUILDMAN}"
|
||
EOF
|
||
cat << "EOF" >> build.sh
|
||
if [[ "${BUILDMAN}" != "" ]]; then
|
||
ret=0;
|
||
tools/buildman/buildman -o /tmp -P -E -W ${BUILDMAN} ${OVERRIDE} || ret=$?;
|
||
if [[ $ret -ne 0 ]]; then
|
||
tools/buildman/buildman -o /tmp -seP ${BUILDMAN};
|
||
exit $ret;
|
||
fi;
|
||
fi
|
||
EOF
|
||
cat build.sh
|
||
docker run -v $PWD:$(work_dir) $(ci_runner_image) /bin/bash $(work_dir)/build.sh
|