u-boot/include/micrel.h
Ash Charles f018545ef7 net: phy: micrel: center FLP burst timing at 16ms
Like [1], reset the FLP burst timing for the KSZ9031 to the 16ms
specified by the IEEE802.3 standard from the chip's default of 8ms.

For more details, see the "Auto-Negotiation Timing" section of the
KSZ9031RNX datasheet.

[1] https://patchwork.kernel.org/patch/6558371/

Signed-off-by: Ash Charles <ash.charles@savoirfairelinux.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-11-07 11:28:16 -06:00

40 lines
1.3 KiB
C

#ifndef _MICREL_H
#define MII_KSZ9021_EXT_COMMON_CTRL 0x100
#define MII_KSZ9021_EXT_STRAP_STATUS 0x101
#define MII_KSZ9021_EXT_OP_STRAP_OVERRIDE 0x102
#define MII_KSZ9021_EXT_OP_STRAP_STATUS 0x103
#define MII_KSZ9021_EXT_RGMII_CLOCK_SKEW 0x104
#define MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW 0x105
#define MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW 0x106
#define MII_KSZ9021_EXT_ANALOG_TEST 0x107
/* Register operations */
#define MII_KSZ9031_MOD_REG 0x0000
/* Data operations */
#define MII_KSZ9031_MOD_DATA_NO_POST_INC 0x4000
#define MII_KSZ9031_MOD_DATA_POST_INC_RW 0x8000
#define MII_KSZ9031_MOD_DATA_POST_INC_W 0xC000
#define MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW 0x4
#define MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW 0x5
#define MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW 0x6
#define MII_KSZ9031_EXT_RGMII_CLOCK_SKEW 0x8
#define MII_KSZ9031_FLP_BURST_TX_LO 0x3
#define MII_KSZ9031_FLP_BURST_TX_HI 0x4
/* Registers */
#define MMD_ACCESS_CONTROL 0xd
#define MMD_ACCESS_REG_DATA 0xe
struct phy_device;
int ksz9021_phy_extended_write(struct phy_device *phydev, int regnum, u16 val);
int ksz9021_phy_extended_read(struct phy_device *phydev, int regnum);
int ksz9031_phy_extended_write(struct phy_device *phydev, int devaddr,
int regnum, u16 mode, u16 val);
int ksz9031_phy_extended_read(struct phy_device *phydev, int devaddr,
int regnum, u16 mode);
#endif