u-boot/include/stm32_rcc.h
Patrick Delaunay d090cbab64 misc: stm32: Add STM32MP1 support
Following next kernel rcc bindings, we must use a MFD
RCC driver which is able to bind both clock and reset
drivers.

We can reuse and adapt RCC MFD driver already available
for MCU SoCs (F4/F7/H7).

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-20 15:55:05 -04:00

98 lines
2.5 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) STMicroelectronics SA 2017
* Author(s): Patrice CHOTARD, <patrice.chotard@st.com> for STMicroelectronics.
*/
#ifndef __STM32_RCC_H_
#define __STM32_RCC_H_
#define AHB_PSC_1 0
#define AHB_PSC_2 0x8
#define AHB_PSC_4 0x9
#define AHB_PSC_8 0xA
#define AHB_PSC_16 0xB
#define AHB_PSC_64 0xC
#define AHB_PSC_128 0xD
#define AHB_PSC_256 0xE
#define AHB_PSC_512 0xF
#define APB_PSC_1 0
#define APB_PSC_2 0x4
#define APB_PSC_4 0x5
#define APB_PSC_8 0x6
#define APB_PSC_16 0x7
struct pll_psc {
u8 pll_m;
u16 pll_n;
u8 pll_p;
u8 pll_q;
u8 ahb_psc;
u8 apb1_psc;
u8 apb2_psc;
};
struct stm32_clk_info {
struct pll_psc sys_pll_psc;
bool has_overdrive;
bool v2;
};
enum soc_family {
STM32F42X,
STM32F469,
STM32F7,
STM32MP1,
};
enum apb {
APB1,
APB2,
};
struct stm32_rcc_clk {
char *drv_name;
enum soc_family soc;
};
struct stm32_rcc_regs {
u32 cr; /* RCC clock control */
u32 pllcfgr; /* RCC PLL configuration */
u32 cfgr; /* RCC clock configuration */
u32 cir; /* RCC clock interrupt */
u32 ahb1rstr; /* RCC AHB1 peripheral reset */
u32 ahb2rstr; /* RCC AHB2 peripheral reset */
u32 ahb3rstr; /* RCC AHB3 peripheral reset */
u32 rsv0;
u32 apb1rstr; /* RCC APB1 peripheral reset */
u32 apb2rstr; /* RCC APB2 peripheral reset */
u32 rsv1[2];
u32 ahb1enr; /* RCC AHB1 peripheral clock enable */
u32 ahb2enr; /* RCC AHB2 peripheral clock enable */
u32 ahb3enr; /* RCC AHB3 peripheral clock enable */
u32 rsv2;
u32 apb1enr; /* RCC APB1 peripheral clock enable */
u32 apb2enr; /* RCC APB2 peripheral clock enable */
u32 rsv3[2];
u32 ahb1lpenr; /* RCC AHB1 periph clk enable in low pwr mode */
u32 ahb2lpenr; /* RCC AHB2 periph clk enable in low pwr mode */
u32 ahb3lpenr; /* RCC AHB3 periph clk enable in low pwr mode */
u32 rsv4;
u32 apb1lpenr; /* RCC APB1 periph clk enable in low pwr mode */
u32 apb2lpenr; /* RCC APB2 periph clk enable in low pwr mode */
u32 rsv5[2];
u32 bdcr; /* RCC Backup domain control */
u32 csr; /* RCC clock control & status */
u32 rsv6[2];
u32 sscgr; /* RCC spread spectrum clock generation */
u32 plli2scfgr; /* RCC PLLI2S configuration */
/* below registers are only available on STM32F46x and STM32F7 SoCs*/
u32 pllsaicfgr; /* PLLSAI configuration */
u32 dckcfgr; /* dedicated clocks configuration register */
/* Below registers are only available on STM32F7 SoCs */
u32 dckcfgr2; /* dedicated clocks configuration register */
};
#endif /* __STM32_RCC_H_ */